Reactivity of potassium tetracyanomercurate with Ag(I), Ni(II) And Co(II)

Potentiometric and conductometric studies on the reactions between K(2)Hg(CN)(4) and Ag(I), Ni(II), Co(II) are reported. The possibility of determination of these metal ions has been evaluated and some titration data are reported.     

Enhanced metal ion selectivity of 2,9-di-(pyrid-2-yl)-1,10-phenanthroline and its use as a fluorescent sensor for cadmium(II)

The metal ion complexing properties of the ligand DPP (2,9-di-(pyrid-2-yl)-1,10-phenanthroline) were studied by crystallography, fluorimetry, and UV-visible spectroscopy. Because DPP forms five-membered chelate rings, it will favor complexation with metal ions of an ionic radius close to 1.0 A. Metal ion complexation and accompanying selectivity of DPP is enhanced by the rigidity of the aromatic backbone of the ligand. Cd2+, with an ionic radius of 0.96 A, exhibits a strong CHEF (chelation enhanced fluorescence) effect with 10(-8) M DPP, and Cd2+ concentrations down to 10(-9) M can be detected. Other metal ions that cause a significant CHEF effect with DPP are Ca2+ (10(-3) M) and Na+ (1.0 M), whereas metal ions such as Zn2+, Pb2+, and Hg2+ cause no CHEF effect with DPP. The lack of a CHEF effect for Zn2+ relates to the inability of this small ion to contact all four donor atoms of DPP. The structures of [Cd(DPP)2](ClO4)2 (1), [Pb(DPP)(ClO4)2H2O] (2), and [Hg(DPP)(ClO4)2] (3) are reported. The Cd(II) in 1 is 8-coordinate with the Cd-N bonds to the outer pyridyl groups stretched by steric clashes between the o-hydrogens on these outer pyridyl groups and the central aromatic ring of the second DPP ligand. The 8-coordinate Pb(II) in 2 has two short Pb-N bonds to the two central nitrogens of DPP, with longer bonds to the outer N-donors. The coordination sphere around the Pb(II) is completed by a coordinated water molecule, and two coordinated ClO4(-) ions, with long Pb-O bonds to ClO4(-) oxygens, typical of a sterically active lone pair on Pb(II). The Hg(II) in 3 shows an 8-coordinate structure with the Hg(II) forming short Hg-N bonds to the outer pyridyl groups of DPP, whereas the other Hg-N and Hg-O bonds are rather long. The structures are discussed in terms of the fit of large metal ions to DPP with minimal steric strain. The UV-visible studies of the equilibria involving DPP and metal ions gave formation constants that show that DPP has a higher affinity for metal ions with an ionic radius close to 1.0 A, particularly Cd(II), Gd(III), and Bi(III), and low affinity for small metal ions such as Ni(II) and Zn(II). The complexes of several metal ions, such as Cd(II), Gd(III), and Pb(II), showed an equilibrium involving deprotonation of the complex at remarkably low pH values, which was attributed to deprotonation of coordinated water molecules according to: [M(DPP)(H2O)]n+ <==> [M(DPP)(OH)](n-1)+ + H+. The tendency to deprotonation of these DPP complexes at low pH is discussed in terms of the large hydrophobic surface of the coordinated DPP ligand destabilizing the hydration of coordinated water molecules and the build-up of charge on the metal ion in its DPP complex because of the inability of the coordinated DPP ligand to hydrogen bond with the solvent.     

Selective adsorption, pre-concentration and matrix elimination for the determination of Pb(II), Cd(II), Hg(II) and Cr(III) using 1,5,9,13-tetrathiacyclohexadecane-3,11-diol anchored poly (p-chloromethylstyrene-ethyleneglycoldimethacrylate) microbeads

Poly(p-chloromethylstyrene-ethyleneglycoldimethacrylate) polymeric microbeads, poly(p-CMS-EGDMA), were synthesized and 1,5,9,13-tetrathiacyclohexadecane-3,11-diol (S4HD) was attached chemically onto the polymeric microbeads. Characterization of all microbeads was done by Fourier transform-infrared spectrometry (FT-IR) and elemental analyzer. The amount of attached 1,5,9,13-tetrathiacyclohexadecane-3,11-diol to the polymer was found to be 2.23 mmol g⁻¹ polymers. The ligand attached microbeads, poly(p-CMS-EGDMA-S4HD), were used to examine the adsorption capacity of Pb(II), Cd(II), Hg(II) and Cr(II) ions for recovery, pre-concentration and the matrix elimination by changing the pH and the initial metal ion concentrations and also adsorption kinetics of the studied metal ions was determined. Pre-concentration factors for the studied toxic metal ions were found to be more than 500-fold and recovery was between 92 and 106%. In the drinking, lake, tap and sea-water samples from water lands, ultra-trace toxic metal ion concentrations were determined easily by using ligand modified microbeads after pre-concentration because of the high pre-concentration factor and easily matrix elimination using ligand modified microbeads. Reference sea-water material was used for the validation of the method and it was found that recovery, pre-concentration and the matrix elimination were performed perfectly. For the desorption of the toxic metal ions, 3 M HCl containing 0.8 M thiourea was used and desorption ratio was obtained more than 96%.     

Spectrophotometric estimation of cobalt(II) with nitrilotriacetic acid

A convenient and efficient method for the estimation of cobalt(II) ions in the presence of other metal ions is described. Interference of metal ions such as iron(II), iron(III), nickel(II), manganese(II), and copper(II) have been investigated. Only iron(III) ions seriously affect this determination. Copper(II) and nickel(II) ions do not interfere if present in a molar-ratio less than 1:2 in the cobalt(II) ion solution. Cobalt(II)-nickel(II) and cobalt(II)-copper(II) binary mixtures can be efficiently analyzed at selective wavelengths.     

A novel class of Cd(II), Hg(II) turn-on and Cu(II), Zn(II) turn-off Schiff base fluorescent probes

N,N'-((5,5'-(quinoxaline-2,3-diyl)bis(1H-pyrrole-5,2-diyl))bis(methanylylidene))bis(4-methoxyaniline) 4 and N,N'-((5,5'-(quinoxaline-2,3-diyl)-bis(1H-pyrrole-5,2-diyl))bis(methanylylidene))dianiline 5 have been prepared and structurally characterized. The X-ray crystal structures of compounds 4 and 4a have been determined. These compounds displayed good sensitivity toward transition metal ions with Cd(II), Zn(II) turn-on and Cu(II), Hg(II) turn-off in fluorescence. It is an elegant example of on/off behavior like a lamp. When Cd(II) or Zn(II) is added into compounds 4 or 5, the lamp will switch on, and then when Cu(II) or Hg(II) is added into the mixture, the lamp will switch off. The binding properties of 4 and 5 for cations were examined by fluorescence spectroscopy. The fluorescence data and crystal structure indicate that a 1:1 stoichiometry complex is formed between compound 4 (or 5) and metal ions, and the binding affinity is very high. The recognition mechanism between compound 4 (or 5) and metal ion was discussed based on the their chemical constructions and the CHEF/CHEQ effect when they interacted with each other.     

1,8-Dihydroxyanthraquinone anchored on silica gel: synthesis and application as solid phase extractant for lead(II), zinc(II) and cadmium(II) prior to their determination by flame atomic absorption spectrometry

A new chelating matrix has been prepared by immobilizing 1,8-dihydroxyanthraquinone (DHAQ) on silica gel modified with (3-aminopropyl)triethoxysilane. After characterizing the matrix with thermogravimetric analysis (TGA), cross polarization magic angle spinning (CPMAS) NMR and diffuse reflectance infrared fourier transformation (DRIFT) spectroscopy, it has been used to preconcentrate Pb(II), Cd(II) and Zn(II) prior to their determination by flame atomic absorption spectrometry. The optimum pH ranges for quantitative sorption are 6.0-7.5, 7.0-8.0 and 6.0-8.0 for Pb, Zn, and Cd, respectively. All the metal ions can be desorbed with 2 mol l(-1) HCl/HNO(3). The sorption capacity of the matrix has been found to be 76.0, 180.0 and 70.2 mumol g(-1) for Pb, Zn and Cd, respectively, with the preconcentration factor of approximately 200. The limits upto which electrolytes NaNO(3), NaCl, NaBr, Na(2)SO(4), Na(3)PO(4) sodium citrate, EDTA, glycine and humic acid and cations Ca(II), Mg(II), Cu(II), Co(II), Ni(II), Mn(II) Al(III), Cr(III) and Fe(III) can co-exist with the metal ions during their sorption without any adverse effect are reported. The lowest concentration of metal ions for quantitative recovery is 5.0 ng ml(-1) The simultaneous enrichment and determination of all the metals is possible if total load of metal ions is less than sorption capacity. The flame AAS was used to determine these metal ions in underground, tap and river water samples (relative standard deviation (R.S.D.)相似文献   

Group 12 metal complexes of [26]hexaphyrin(1.1.1.1.1.1)

Metalation of meso-hexakis(pentafluorophenyl)-substituted [26]hexaphyrin(1.1.1.1.1.1) (1) has been explored with group 12 metal ions Zn(II), Cd(II), and Hg(II). Zn(II) and Cd(II) ions afforded dinuclear gable-shaped complexes 2 and 3 in good yields, while Hg(II) ion provided bis-Hg(II) and mono-Hg(II) planar complexes (4 and 5) via C-H bond cleavage.     

Metal complexes of 4-(2'-thiazolylazo)-resorcinol A comparative study with 4-(2'-pyridylazo)-resorcinol

The acid dissociation constants of 4-(2'-thiazolylazo)-resorcinol (TAR) and the formation constants of the metal complexes formed by this reagent with Cu(II), Ni(II), Co(II), Zn(II) and Mn(II) have been determined potentiometrically at 25° in 50% v/v mixtures of dioxane and water. The values obtained for TAR and the metal complexes are contrasted with similar values for the reagent 4-(2'-pyridylazo)-resorcinol (PAR). Differences and similarities between the co-ordinating tendencies of these two reagents are revealed in terms of the proton displacement constant and the acid dissociation constants of the metal complexes. Evidence is presented which suggests that both TAR and PAR may act as terdentate ligands toward some bivalent metal ions.     

Copper(II) ion-selective microelectrochemical transistor

A device has been developed for the measurement of copper(II) ions (Cu⁺⁺) in aqueous medium. The device reported here is an electrochemical transistor that consists of two platinum electrodes separated by 100-μm spacing and bridged with an anodically grown polycarbazole film. The undoped polycarbazole film is observed to be highly selective for the Cu(II) ions. In a completed device, the conductivity of the polycarbazole film changes on addition of Cu (II)ions. This change in conductivity is attributed to the conformational changes in the polymer phase on occupation of the Cu(II) ions, without affecting electron/proton transfer. The device turns on by adding 2.5×10⁻⁶ M Cu(II) ions and reaches a saturation region above a concentration of 10⁻⁴ M Cu(II) ions. In this concentration range, the plot of I _D vs log[Cu(II)] is linear. The selectivity of the device for other metal ions such as Cu(I), Co(II), Fe(II), Fe(III), Zn(II), and Pb(II) is also studied.     

Comparison of energy interaction parameters for the complexation of Pr(III) with glutathione reduced (GSH) in absence and presence of Zn(II) in aqueous and aquated organic solvents using 4f-4f transition spectra as PROBE

The coordination chemistry of glutathione reduced (GSH) is of great importance as it acts as excellent model system for the binding of metal ions. The GSH complexation with metal ions is involved in the toxicology of different metal ions. Its coordination behaviour for soft metal ions and hard metal ions is found different because of the structure of GSH and its different potential binding sites. In our work we have studied two chemically dissimilar metal ions viz. Pr(III), which prefer hard donor site like carboxylic groups and Zn(II) the soft metal ion which prefer peptide-NH and sulphydryl groups. The absorption difference and comparative absorption spectroscopy involving 4f-4f transitions of the heterobimetallic Complexation of GSH with Pr(III) and Zn(II) has been explored in aqueous and aquated organic solvents. The variation in the energy parameters like Slater-Condon (F(K)), Racah (E(K)) and Lande (xi(4f)), Nephelauxetic parameter (beta) and bonding parameter (b(1/2)) are computed to explain the nature of complexation.     

Electrochemistry of [(TMpyP)M(II)]4+ (X-)4 (X- = Cl- or BPh4-) and [(TMpyP)M(III)Cl]4+ (Cl-)4 in N,N-dimethylformamide where M is one of 15 different metal ions

The electrochemistry of 16 different water-soluble porphyrins of the type [(TMpyP)M(II)]4+ (X-)4 or [(TMpyP)M(III)Cl]4+ (Cl-)4 is reported in nonaqueous media where TMpyP is the dianion of meso-tetrakis(N-methylpyridiniumyl)porphyrin and X- = Cl- or BPh4-. These studies were carried out to examine the effect of the metal ion and porphyrin counterion (X-) on the electrochemical properties of the TMpyP complexes with a special emphasis being given to the overall number of electrons added and the number of electrode processes upon reduction. All of the investigated compounds with electroinactive central metal ions undergo an overall addition of six electrons. This occurs for most compounds via three two-electron-transfer steps, but more than three processes are observed for porphyrins having metal ions with a low electronegativity (e.g., Cd(II)). The first reduction of each porphyrin having an M(II) ion or an electroinactive M(III) ion yields a porphyrin dianion which is characterized by an intense band located close to 800 nm, and this reversible reduction is followed by further reductions of the 1-methyl-4-pyridyl groups at more negative potentials. Four of the compounds with electroactive central metal ions, [(TMpyP)M(III)Cl]4+(Cl-)4 (M = Co, Fe, Mn, or Au), undergo an additional reversible M(III)/M(II) process prior to reactions involving the porphyrin pi-ring system and the 1-methyl-4-pyridyl substituents.     

Preparation, characterization and biological activity of Fe(III), Fe(II), Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and UO(2)(II) complexes of new cyclodiphosph(V)azane of sulfaguanidine

Novel hexachlorocyclodiphosph(V)azane of sulfaguanidine, H(4)L, l,3-[N'-amidino-sulfanilamide]-2,2,2,4,4,4-hexachlorocyclodiphosph(V)azane was prepared and its coordination behaviour towards the transition metal ions Fe(III), Fe(II), Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and UO(2)(II) was studied. The structures of the isolated products are proposed based on elemental analyses, IR, UV-vis, (1)H NMR, mass spectra, reflectance, magnetic susceptibility measurements and thermogravimetric analysis (TGA). The hyperfine interactions in the isolated complex compounds were studied using 14.4keV gamma-ray from radioactive (57)Co (M?ssbauer spectroscopy). The data show that the ligand are coordinated to the metal ions via the sulfonamide O and deprotonated NH atoms in an octahedral manner. The H(4)L ligand forms complexes of the general formulae [(MX(z))(2)(H(2)L)H(2)O)(n)] and [(FeSO(4))(2) (H(4)L) (H(2)O)(4)], where X=NO(3) in case of UO(2)(II) and Cl in case of Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II). The molar conductance data show that the complexes are non-electrolytes. The thermal behaviour of the complexes was studied and different thermodynamic parameters were calculated using Coats-Redfern method. Most of the prepared complexes showed high bactericidal activity and some of the complexes show more activity compared with the ligand and standards.     

Synthesis, investigation and spectroscopic characterization of piroxicam ternary complexes of Fe(II), Fe(III), Co(II), Ni(II), Cu(II) and Zn(II) with glycine and DL-phenylalanine

The ternary piroxicam (Pir; 4-hydroxy-2-methyl-N-(2-pyridyl)-2H-1,2-benzothiazine-3-carboxamide 1,1-dioxide) complexes of Fe(II), Fe(III), Co(II), Ni(II), Cu(II) and Zn(II) with various amino acids (AA) such as glycine (Gly) or DL-phenylalanine (PhA) were prepared and characterized by elemental analyses, molar conductance, IR, UV-Vis, magnetic moment, diffuse reflectance and X-ray powder diffraction. The UV-Vis spectra of Pir and the effect of metal chelation on the different interligand transitions are discussed in detailed manner. IR and UV-Vis spectra confirm that Pir behaves as a neutral bidentate ligand coordinated to the metal ions via the pyridine-N and carbonyl group of the amide moiety. Gly molecule acted as a uninegatively monodentate ligand and coordinate to the metal ions through its carboxylic group, in addition PhA acted as a uninegatively bidentate ligand and coordinate to the metal ions through its carboxylic and amino groups. All the chelates have octahedral geometrical structures while Cu(II)- and Zn(II)-ternary chelates with PhA have square planar geometrical structures. The molar conductance data reveal that most of these chelates are non electrolytes, while Fe(III)-Pir-Gly, Co(II)-, Ni(II)-, Cu(II)- and Zn(II)-Pir-PhA chelates were 1:1 electrolytes. X-ray powder diffraction is used as a new tool to estimate the crystallinity of chelates as well as to elucidate their geometrical structures.     

Polymer Supported Schiff Base Complexes of Iron(III), Cobalt(II) and Nickel(II) Ions and their Catalytic Activity in Oxidation of Phenol and Cyclohexene

The polymer supported transition metal complexes of N,N′‐bis (o‐hydroxy acetophenone) hydrazine (HPHZ) Schiff base were prepared by immobilization of N,N′‐bis(4‐amino‐o‐hydroxyacetophenone)hydrazine (AHPHZ) Schiff base on chloromethylated polystyrene beads of a constant degree of crosslinking and then loading iron(III), cobalt(II) and nickel(II) ions in methanol. The complexation of polymer anchored HPHZ Schiff base with iron(III), cobalt(II) and nickel(II) ions was 83.30%, 84.20% and 87.80%, respectively, whereas with unsupported HPHZ Schiff base, the complexation of these metal ions was 80.3%, 79.90% and 85.63%. The unsupported and polymer supported metal complexes were characterized for their structures using I.R, UV and elemental analysis. The iron(III) complexes of HPHZ Schiff base were octahedral in geometry, whereas cobalt(II) and nickel(II) complexes showed square planar structures as supported by UV and magnetic measurements. The thermogravimetric analysis (TGA) of HPHZ Schiff base and its metal complexes was used to analyze the variation in thermal stability of HPHZ Schiff base on complexation with metal ions. The HPHZ Schiff base showed a weight loss of 58% at 500°C, but its iron(III), cobalt(II) and nickel(II) ions complexes have shown a weight loss of 30%, 52% and 45% at same temperature. The catalytic activity of metal complexes was tested by studying the oxidation of phenol and epoxidation of cyclohexene in presence of hydrogen peroxide as an oxidant. The supported HPHZ Schiff base complexes of iron(III) ions showed 64.0% conversion for phenol and 81.3% conversion for cyclohexene at a molar ratio of 1∶1∶1 of substrate to catalyst and hydrogen peroxide, but unsupported complexes of iron(III) ions showed 55.5% conversion for phenol and 66.4% conversion for cyclohexene at 1∶1∶1 molar ratio of substrate to catalyst and hydrogen peroxide. The product selectivity for catechol (CTL) and epoxy cyclohexane (ECH) was 90.5% and 96.5% with supported HPHZ Schiff base complexes of iron(III) ions, but was found to be low with cobalt(II) and nickel(II) ions complexes of Schiff base. The selectivity for catechol (CTL) and epoxy cyclohexane (ECH) was different with studied metal ions and varied with molar ratio of metal ions in the reaction mixture. The selectivity was constant on varying the molar ratio of hydrogen peroxide and substrate. The energy of activation for epoxidation of cyclohexene and phenol conversion in presence of polymer supported HPHZ Schiff base complexes of iron(III) ions was 8.9 kJ mol^?1 and 22.8 kJ mol^?1, respectively, but was high with Schiff base complexes of cobalt(II) and nickel(II) ions and with unsupported Schiff base complexes.     

Dinuclear cobalt(II) and copper(II) complexes with a Py2N4S2 macrocyclic ligand

The interaction between Co(II) and Cu(II) ions with a Py(2)N(4)S(2)-coordinating octadentate macrocyclic ligand (L) to afford dinuclear compounds has been investigated. The complexes were characterized by microanalysis, conductivity measurements, IR spectroscopy and liquid secondary ion mass spectrometry. The crystal structure of the compounds [H(4)L](NO(3))(4), [Cu(2)LCl(2)](NO(3))(2) (5), [Cu(2)L(NO(3))(2)](NO(3))(2) (6), and [Cu(2)L(μ-OH)](ClO(4))(3)·H(2)O (7) was also determined by single-crystal X-ray diffraction. The [H(4)L](4+) cation crystal structure presents two different conformations, planar and step, with intermolecular face-to-face π,π-stacking interactions between the pyridinic rings. Complexes 5 and 6 show the metal ions in a slightly distorted square-pyramidal coordination geometry. In the case of complex 7, the crystal structure presents the two metal ions joined by a μ-hydroxo bridge and the Cu(II) centers in a slightly distorted square plane or a tetragonally distorted octahedral geometry, taking into account weak interactions in axial positions. Electron paramagnetic resonance spectroscopy is in accordance with the dinuclear nature of the complexes, with an octahedral environment for the cobalt(II) compounds and square-pyramidal or tetragonally elongated octahedral geometries for the copper(II) compounds. The magnetic behavior is consistent with the existence of antiferromagnetic interactions between the ions for cobalt(II) and copper(II) complexes, while for the Co(II) ones, this behavior could also be explained by spin-orbit coupling.     

Cation exchange column chromatography in aqueous ammonium acetate: Separation of U(VI), Al(III), Sr(II), Ba(II) and Hg(II) from other metal ions

Summary A rigorous analysis of the effect of various concentrations (0.02–1.60M) of ammonium acetate on the distribution coefficients (K) of a number of metal ions using cation exchanger Dowex 50W-X8 (100–200 mesh NH₄ ⁺-form) has been made. On account of the low affinity of U(VI) for resin in 0.20M NH₄OAc it can be separated from all other metal ions. HighK values of Sr(II), Ba(II) and Hg(II) at higher 0.50M NH₄OAc are responsible for their separation from others. The abnormal column Chromatographic behaviour of Al(III) permits its separation from other metal ions including U(VI), Sr(II), Ba(II), Hg(II). A number of binary and ternary separations have been achieved.     

Azocalix[4]pyrrole Amberlite XAD-2: New polymeric chelating resins for the extraction, preconcentration and sequential separation of Cu(II), Zn(II) and Cd(II) in natural water samples

Two novel azocalix[4]pyrrole Amberlite XAD-2 polymeric chelating resins were synthesized by covalently linking diazotized Amberlite XAD-2 with calix[4]pyrrole macrocycles. The chelating resins were used for extraction, preconcentration and sequential separation of metal ions such as Cu(II), Zn(II) and Cd(II) by column chromatography prior to their determination by UV/vis spectrophotometry or flame atomic absorption spectrophotometry (FAAS) or inductively coupled plasma atomic emission spectroscopy (ICP-AES). Various parameters such as effect of pH on absorption, concentration of eluting agents, flow rate, total sorption capacity, exchange kinetics, preconcentration factor, distribution coefficient, breakthrough capacity and resin stability, were optimized for effective separation and preconcentration. The resin showed good ability for the separation of metal ions from binary and ternary mixture on the basis of pH of absorption and concentration of eluting agents. The newly synthesized resins showed good potential for trace enrichment of Cu(II), Zn(II) and Cd(II) metal ions, especially for Cu(II), as compared to the earlier reported resins. The synthesized resins were recycled at least 8-10 times without much affecting column sorption capacity. The presented method was successfully applied for determination of Cu(II), Zn(II) and Cd(II) in natural and ground water samples.     

Spectral and thermal studies of 4-(1H-pyrazolo (3,4-d) pyrimidin-4-ylazo) benzene-1,3-diol complexes of cobalt(II), nickel(II) and copper(II)

4-(1H-Pyrazolo (3,4-d) pyrimidin-4-ylazo) benzene-1,3-diol was synthesized and characterized by various spectral and analytical techniques. Semiempirical quantum calculations using the AM1 method have been performed in order to evaluate the geometry and electronic structure of the title azodye in the ground state. The complex formation between Co(II), Ni(II) and Cu(II) ions and the title azodye was studied conductometrically and spectrophotometrically. The spectrophotometric determination of the title metal ions and titration using EDTA are reported. Co(II), Ni(II) and Cu(II) complexes of the title azodye have been synthesized and characterized by elemental analysis, conductivity, magnetic susceptibility, IR, UV-Vis and thermal analysis (TGA and DTA).The spectral and magnetic data suggested the octahedral geometry for Co(II) and Ni(II) complexes while Cu(II) complexes have square planar geometry. The thermal studies confirmed the chemical formulations of the title complexes. The thermal degradation takes place in two or three steps depending on the type of the metal and the geometry of the complexes. The kinetics of the decomposition was examined by using Coats-Redfern relation. The activation energies and other activation parameters (DeltaH, DeltaS and DeltaG) were computed and related to the bonding and stereochemistry of the complexes.     

Evaluation of the toluene-3,4-dithiol (TDT)-trioctylamine (TOA) synergic extraction system

Synergic extraction of different essential and toxic metal ions such as Mn(II), Co(II), Zn(II), Hg(II), Cd(II) and Se(IV) has been carried out using toluene-3,4-dithiol (TDT) and trioctylamine (TOA) in chloroform. A strong synergic effect in the extraction of Co(II), Mn(II) and Zn(II) has been observed. The effect of different anions on the extraction has also been analyzed. Ascorbate ions can easily separate Hg(II) and Se(IV) ions. The stability of synergic adduct and reaction mechanism are discussed.     

Acid equilibria of semi-methylthymol blue and formation constants of cobalt(II), nickel(II), copper(II) and zinc(II) complexes with semi-methylthymol blue

Potentiometric and spectrophotometric studies on Semi-Methylthymol Blue (SMTB or H(4)L) have been performed. The acid-base and Co(II), Ni(II), Cu(II) and Zn(II)-ligand reaction stoichiometries were determined, and the formation constants of the corresponding proton and metal complexes, and the molar absorptivities were calculated. Evidence was found for the formation of 1:1 Co(II), Ni(II) and Cu(II) complexes, and 1:1 and 1:2 Zn(II) complexes. Cu(II) formed the hydroxo-complex, Cu(OH)L(3-), but no hydroxo-complexes of the other metal ions were observed. Suggestions are made concerning the probable structure of the complexes.