trans-Fe(II)(H)2(diphosphine)(diamine) complexes as alternative catalysts for the asymmetric hydrogenation of ketones? A DFT study

New insights into the structural, electronic and catalytic properties of Fe complexes are provided by a density functional theory study of model as well as real [Fe(II)(H)(2)(diphosphine)(diamine)] systems. Calculations conducted using several different functionals on the trans- and cis-isomers of [Fe(II)(H)(2)(S-xylbinap)(S,S-dpen)] complexes show that, as with the [Ru(II)(H)(2)(diphosphine)(diamine)] complexes, the trans-[Fe(II)(H)(2)(diphosphine)(diamine)] complex is the more stable isomer. Analysis of the spin states of the trans-[Fe(II)(H)(2)(diphosphine)(diamine)] complexes also shows that the singlet state is significantly more stable than the triplet and the quintet, as with the [Ru(II)(H)(2)(diphosphine)(diamine)] complexes. Calculations of the catalytic cycle for the hydrogenation of ketones using two model trans-[M(II)(H)(2)(PH(3))(2)(en)] catalysts, where M = Ru and Fe, show that the mechanism of reaction as well as the activation energies are very similar, in particular: (i) the ketone/alcohol hydrogen transfer reaction occurs through the metal-ligand bifunctional mechanism, with energy barriers of 3.4 and 3.2 kcal mol(-1) for the Ru- and Fe-catalysed reactions, respectively; (ii) the heterolytic splitting of H(2) across the M[partial double bond, bottom dashed]N bond for the regeneration of the Ru and Fe catalysts has an activation barrier of 13.8 and 12.8 kcal mol(-1), respectively, and is expected to be the rate determining step for both catalytic systems. The reduction of acetophenone by trans-[M(II)(H)(2)(S-xylbinap)(S,S-dpen)] complexes along two competitive reaction pathways, shows that the intermediates for the Fe catalytic system are similar to those responsible for the high enantioselectivity of (R)-alcohol in those proposed trans-[Ru(II)(H)(2)(S-xylbinap)(S,S-dpen)] catalysed acetophenone hydrogenation reaction. Thus the high enantiomeric excess in the hydrogenation of acetophenone could, in principle, be achieved using Fe catalysts.     

New insights into the enantioselectivity in the hydrogenation of prochiral ketones

The high enantioselectivity in the hydrogenation of acetophenone catalysed by trans-Ru(H)2(S,S-dpen)(S-xylbinap) is explained in terms of the existence of a stable intermediate formed when the reactant enters the catalyst pocket fixing the molecular orientation.     

The effects of ligand variation on enantioselective hydrogenation catalysed by RuH2(diphosphine)(diamine) complexes

Density functional theory calculations have been used to investigate the hydrogenation of acetophenone (ACP) catalysed by the RuH(2)(diphosphine)(diamine) complexes with emphasis on the effect of the structure of the diphosphine and diamine ligands on the enantioselectivity. The computed reaction coordinate diagrams of RuH(2)(diphosphine)[(S,S)-DPEN] catalysed reactions with different (S)-diphosphine ligands (XylBINAP, TolBINAP, and BINAP) show that the presence of two methyl groups in the meta position is critical to obtaining a high difference in activation energy for the reaction pathways associated with the (R)- and (S)-alcohols, and consequently high enantioselectivity. The effect of the diamine structure while keeping the TolBINAP and XylBINAP fixed has also been analysed. To enhance the enantioselectivity of the TolBINAP system, the addition of two methyl groups and the removal of a phenyl group of the diamine (DMAPEN) offer the necessary steric interactions. We conclude by reporting a correlation between the enantiomeric excess and the difference in the computed activation energies of the two most favourable (S) and (R) reaction pathways, which shows that the computational procedure adopted could be used to predict the enantiomeric excess of ketone hydrogenation reactions catalysed by the Noyori-type catalysts, and assist in the choice of ligand when optimising the enantiomeric excess.     

Unexpected formation of ruthenium(II) hydrides from a reactive dianiline precursor and 1,2-(Ph2P)2-1,2-closo-C2B10H10

Reaction of the new precursor cis, trans-Ru(cod)(anln)2Cl2 with the diphosphine 1,2-bis(diphenylphosphino)-1,2-dicarba-closo-dodecaborane (o-dppc) unexpectedly results in two new ruthenium(II) hydrides, trans-Ru(o-dppc) 2(H)Cl and the neutral, five-coordinate complex Ru(o-dppc)(nido-dppc)(H), depending upon the reaction conditions [anln is aniline and nido-dppc is 7,8-(Ph2P)2C2B9H10(-)]. Chloride abstraction from trans-Ru(o-dppc)2(H)Cl leads to another five-coordinate hydride, [Ru(o-dppc)2(H)](+), which is isolated as either a triflate or hexafluorophosphate salt. On the basis of labeling and reactivity studies, the source of the hydride appears to be the cod ligand.     

Mechanism of the hydrogenation of ketones catalyzed by trans-dihydrido(diamine)ruthenium II complexes

The complexes trans-RuH(Cl)(tmen)(R-binap) (1) and (OC-6-43)-RuH(Cl)(tmen)(PPh(3))(2) (2) are prepared by the reaction of the diamine NH(2)CMe(2)CMe(2)NH(2) (tmen) with RuH(Cl)(PPh(3))(R-binap) and RuH(Cl)(PPh(3))(3), respectively. Reaction of KHB(sec)Bu(3) with 1 yields trans-Ru(H)(2)(R-binap)(tmen) (5) while reaction of KHB(sec)Bu(3) or KO(t)Bu with 2 under Ar yields the new hydridoamido complex RuH(PPh(3))(2)(NH(2)CMe(2)CMe(2)NH) (4). Complex 4 has a distorted trigonal bipyramidal geometry with the amido nitrogen in the equatorial plane. Loss of H(2) from 5 results in the related complex RuH(R-binap)(NH(2)CMe(2)CMe(2)NH) (3). Reaction of H(2) with 4 yields the trans-dihydride (OC-6-22)-Ru(H)(2)(PPh(3))(2)(tmen)(6). Calculations support the assignment of the structures. The hydrogenation of acetophenone is catalyzed by 5 or 4 in benzene or 2-propanol without the need for added base. For 5 in benzene at 293 K over the ranges of concentrations [5] = 10(-)(4) to 10(-)(3) M, [ketone] = 0.1 to 0.5 M, and of pressures of H(2) = 8 to 23 atm, the rate law is rate = k[5][H(2)] with k = 3.3 M(-1) s(1), DeltaH++ = 8.5 +/- 0.5 kcal mol(-1), DeltaS++ = -28 +/- 2 cal mol(-1) K(-1). For 4 in benzene at 293 K over the ranges of concentrations [4] = 10(-4) to 10(-3) M, [ketone] 0.1 to 0.7 M, and of pressures of H(2) = 1 to 6 atm, the preliminary rate law is rate = k[4][H(2)] with k = 1.1 x 10(2) M(-1) s(-1), DeltaH++ = 7.6 +/- 0.3 kcal mol(-1), DeltaS++ = -23 +/- 1 cal mol(-1) K(-1). Both theory and experiment suggest that the intramolecular heterolytic splitting of dihydrogen across the polar Ru=N bond of the amido complexes 3 and 4 is the turn-over limiting step. A transition state structure and reaction energy profile is calculated. The transfer of H(delta+)/H(delta-) to the ketone from the RuH and NH groups of 5 in a Noyori metal-ligand bifunctional mechanism is a fast process and it sets the chirality as (R)-1-phenylethanol (62-68% ee) in the hydrogenation of acetophenone. The rate of hydrogenation of acetophenone catalyzed by 5 is slower and the ee of the product is low (14% S) when 2-propanol is used as the solvent, but both the rate and ee (up to 55% R) increase when excess KO(t)Bu is added. The formation of ruthenium alkoxide complexes in 2-propanol might explain these observations. Alkoxide complexes [RuP(2)]H(OR)(tmen), [RuP(2)] = Ru(R-binap) or Ru(PPh(3))(2), R= (i) Pr, CHPhMe, (t)Bu, are observed by reacting the alcohols (i)PrOH, phenylethanol, and (t)BuOH with the dihydrides 5 and 6, respectively, under Ar. In the absence of H(2), the amido complexes 3 and 4 react with acetophenone to give the ketone adducts [RuP(2)]H(O=CPhMe)(NH(2)CMe(2)CMe(2)NH) in equilibrium with the enolate complexes trans- [RuP(2)](H)(OCPh=CH(2))(tmen) and eventually the decomposition products [RuP(2)]H(eta(5)-CH(2)CPhCHCPhO), with the binap complex characterized crystallographically. In general, proton transfer from the weakly acidic molecules dihydrogen, alcohol, or acetophenone to the amido nitrogen of complexes 3 and 4 is favored in two ways when the molecule coordinates to ruthenium: (1) an increase in acidity of the molecule by the Lewis acidic metal and (2) an increase in the basicity of the amido nitrogen caused by its pyramidalization. The formato complexes trans-[RuP(2)]H(OCHO)(tmen) were prepared by reacting the respective complex 4 or 5 with formic acid. The crystal structure of RuH(OCHO)(PPh(3))(2)(tmen) displays similar features to the calculated transition state for H(delta+)/H(delta-) transfer to the ketone in the catalytic cycle.     

Ru(II)-SDP-complex-catalyzed asymmetric hydrogenation of ketones. Effect of the alkali metal cation in the reaction

The Ru(II) complexes of SDP and DPEN combined with t-BuOK in 2-propanol formed a very effective catalyst for the hydrogenation of simple aromatic ketones with high activity and enantioselectivity. The racemic alpha-arylcycloalkanones can also be hydrogenated by this system, providing alpha-arylcycloalkanols in excellent cis/trans stereoselectivity (>99:1) and enantioselectivity (up to 99.9%) for the cis isomer. In the study of the effect of the alkali metal cation in the hydrogenation of acetophenone using RuCl(2)(Tol-SDP)(DPEN) and RuCl(2)(Xyl-SDP)(DPEN) catalysts, we found that t-BuONa provided a faster reaction than t-BuOK, which indicated that the sterically hindered diphosphine ligands preferred the base with the smaller metal cation.     

Hydride Ligands Make the Difference: Density Functional Study of the Mechanism of the Murai Reaction Catalyzed by [Ru(H)(2) (H(2) )(2) (PR(3) )(2) ] (R=cyclohexyl)

The catalytic cycle for the Murai reaction at room temperature between ethylene and acetophenone catalyzed by [Ru(H)(2) (H(2) )(2) (PMe(3) )(2) ] has been studied computationally at the B3PW91 level. The active species is the ruthenium dihydride complex [Ru(H)(2) (PMe(3) )(2) ]. Coordination of the ketone group to Ru induces very easy C?H bond cleavage. Coordination of ethylene after ketone de-coordination, followed by ethylene insertion into a Ru?H bond, creates the Ru?ethyl bond. Isomerization of the complex to a Ru(IV) intermediate creates the geometry adapted to C?C bond formation. Re-coordination of the ketone before the C?C coupling lowers the energy of the corresponding TS. The highest point on the potential energy surface (PES) is the TS for the isomerization to the Ru(IV) intermediate, which prepares the catalyst geometry for the C?C coupling step. Inclusion of dispersion corrections significantly lowers the height of the overall activation barrier. The actual bond cleavage and bond forming processes are associated to low activation barriers because of the presence of hydrogen atoms around the Ru center. They act as redox buffers through formation and breaking of H?H bonds in the coordination sphere. This flexibility allows optimal repartition of the various ligands according to the change in stereoelectronic demands along the catalytic cycle.     

Mechanism of asymmetric hydrogenation of ketones catalyzed by BINAP/1,2-diamine-rutheniumII complexes

Asymmetric hydrogenation of acetophenone with trans-RuH(eta(1)-BH(4))[(S)-tolbinap][(S,S)-dpen] (TolBINAP = 2,2'-bis(di-4-tolylphosphino)-1,1'-binaphthyl; DPEN = 1,2-diphenylethylenediamine) in 2-propanol gives (R)-phenylethanol in 82% ee. The reaction proceeds smoothly even at an atmospheric pressure of H(2) at room temperature and is further accelerated by addition of an alkaline base or a strong organic base. Most importantly, the hydrogenation rate is initially increased to a great extent with an increase in base molarity but subsequently decreases. Without a base, the rate is independent of H(2) pressure in the range of 1-16 atm, while in the presence of a base, the reaction is accelerated with increasing H(2) pressure. The extent of enantioselection is unaffected by hydrogen pressure, the presence or absence of base, the kind of base and coexisting metallic or organic cations, the nature of the solvent, or the substrate concentrations. The reaction with H(2)/(CH(3))(2)CHOH proceeds 50 times faster than that with D(2)/(CD(3))(2)CDOD in the absence of base, but the rate differs only by a factor of 2 in the presence of KO-t-C(4)H(9). These findings indicate that dual mechanisms are in operation, both of which are dependent on reaction conditions and involve heterolytic cleavage of H(2) to form a common reactive intermediate. The key [RuH(diphosphine)(diamine)](+) and its solvate complex have been detected by ESI-TOFMS and NMR spectroscopy. The hydrogenation of ketones is proposed to occur via a nonclassical metal-ligand bifunctional mechanism involving a chiral RuH(2)(diphosphine)(diamine), where a hydride on Ru and a proton of the NH(2) ligand are simultaneously transferred to the C=O function via a six-membered pericyclic transition state. The NH(2) unit in the diamine ligand plays a pivotal role in the catalysis. The reaction occurs in the outer coordination sphere of the 18e RuH(2) complex without C=O/metal interaction. The enantiofaces of prochiral aromatic ketones are kinetically differentiated on the molecular surface of the coordinatively saturated chiral RuH(2) intermediate rather than in a coordinatively unsaturated Ru template.     

A succession of isomers of ruthenium dihydride complexes. Which one is the ketone hydrogenation catalyst?

Reaction of RuHCl(PPh(3))(2)(diamine) (1a, diamine = (R,R)-1,2-diaminocyclohexane, (R,R)-dach; 1b, diamine = ethylenediamine, en) with KO(t)Bu in benzene quickly generates solutions of the amido-amine complexes RuH(PPh(3))(2)(NHC(6)H(10)NH(2)), (2a'), and RuH(PPh(3))(2)(NHCH(2)CH(2)NH(2)), (2b'), respectively. These solutions react with dihydrogen to first produce the trans-dihydrides (OC-6-22)-Ru(H)(2)(PPh(3))(2)(diamine) (t,c-3a, t,c-3b). Cold solutions (-20 degrees C) containing trans-dihydride t,c-3a react with acetophenone under Ar to give (S)-1-phenylethanol (63% ee). Complexes t,c-3 have lifetimes of less than 10 min at 20 degrees and then isomerize to the cis-dihydride, cis-bisphosphine isomers (OC-6-32)-Ru(H)(2)(PPh(3))(2)(diamine) (Delta/Lambda-c,c-3a, c,c-3b). A solution containing mainly Delta/Lambda-c,c-3a reacts with acetophenone under Ar to give (S)-1-phenylethanol in 20% ee, whereas it is an active precatalyst for its hydrogenation under 5 atm H(2) to give 1-phenylethanol with an ee of 50-60%. Complexes c,c-3 isomerize to the cis-dihydride, trans-bisphosphine complexes (OC-6-13)-Ru(H)(2)(PPh(3))(2)(diamine) (c,t-3a, c,t-3b) with half-lives of 40 min and 1 h, respectively. A mixture of Delta/Lambda-c,c-3a and c,t-3a can also be obtained by reaction of 1a with KBH(Bu(sec))(3). A solution of complex c,t-3a in benzene under Ar reacts very slowly with acetophenone. These results indicate that the trans-dihydrides t,c-3a or t,c-3b along with the corresponding amido-amine complexes 2a' or 2b' are the active hydrogenation catalysts in benzene, while the cis-dihydrides c,c-3a or c,c-3b serve as precatalysts. The complexes RuCl(2)(PPh(3))(2)((R,R)-dach) or 1a, when activated by KO(t)Bu, are also sources of the active catalysts. A study of the kinetics of the hydrogenation of acetophenone in benzene catalyzed by 3a indicates a rate law: rate = k[c,c-3a](initial)[H(2)] with k = 7.5 M(-1) s(-1). The turnover-limiting step appears to be the reaction of 2a' with dihydrogen as it is for RuH(NHCMe(2)CMe(2)NH(2))(PPh(3))(2) (2c'). The catalysts are more active in 2-propanol, even without added base, and the kinetic behavior is complicated. The basic cis-dihydride c,t-3a reacts with [NEt(3)H]BPh(4) to produce the dihydrogen complex (OC-14)-[Ru(eta(2)-H(2))(H)(PPh(3))(2)((R,R)-dach)]BPh(4) (4) and with diphenylphosphinic acid to give the complex RuH(O(2)PPh(2))(PPh(3))(2)((R,R)-dach) (5). The structure of 5 models aspects of the transition state structure for the ketone hydrogenation step. Complex 2b' decomposes rapidly under Ar to give dihydrides 3b along with a dinuclear complex (PPh(3))(2)HRu(mu-eta(2);eta(4)-NHCHCHNH)RuH(PPh(3))(2) (6) containing a rare, bridging 1,4-diazabutadiene group. The formation of an imine by beta-hydride elimination from the amido-amine ligand of 2a' under Ar might explain some loss of enantioselectivity of the catalyst. The structures of complexes 1a, 5, and 6 have been determined by single-crystal X-ray diffraction.     

对烷氧基取代 MeO-BIPHEP 型手性双膦钌配合物催化 β-酮酸酯不对称加氢反应

 报道了对烷氧基取代的 MeO-BIPHEP 型手性双膦配体钌配合物催化的β-酮酸酯不对称加氢反应, 考察了反应温度、压力、底物/催化剂摩尔比和溶剂对反应的影响. 结果表明, 在乙醇中该配合物催化 3-丁酮酸乙酯加氢反应的对映选择性达 98.0%,且对含不同取代基的β-酮酸酯均表现出较高的活性和对映选择性.     

RuCl2(BISBI)[(R,R)-DPEN]催化苯乙酮不对称加氢反应研究

报道了配合物RuCl₂(BISBI)[(R,R)-DPEN] [BISBI＝2,2'-二(二苯膦亚甲基)-1,1'-联苯, DPEN＝1,2-二苯基乙二胺]的合成和表征, 并研究了其在苯乙酮不对称加氢反应中的催化性能. 考察了底物/催化剂物质的量比、碱浓度、反应温度和氢气压力等对催化活性和对映选择性的影响, 在苯乙酮/KOH/催化剂的物质的量比为30000∶250∶1, 氢气压力为2 MPa, 反应温度为35 ℃时, 苯乙酮的转化率和生成α-苯乙醇的对映选择性分别达到了100%和65% ee.     

Synthesis of optically active 2-aminotetraline derivatives via enantioselective ruthenium-catalyzed hydrogenation of ene carbamates

The enantioselective hydrogenation of prochiral ene carbamates, directly derived from 2-tetralone, was completed using a catalytic ruthenium system generated from Ru(COD)(methallyl)₂, an optically pure diphosphine and a strong acid containing a non-coordinating counter anion.     

Additive effects of amines on asymmetric hydrogenation of quinoxalines catalyzed by chiral iridium complexes

The additive effects of amines were realized in the asymmetric hydrogenation of 2-phenylquinoxaline, and its derivatives, catalyzed by chiral cationic dinuclear triply halide-bridged iridium complexes [{Ir(H)[diphosphine]}(2) (μ-X)(3) ]X (diphosphine=(S)-2,2'-bis(diphenylphosphino)-1,1'-binaphthyl [(S)-BINAP], (S)-5,5'-bis(diphenylphosphino)-4,4'-bi-1,3-benzodioxole [(S)-SEGPHOS], (S)-5,5'-bis(diphenylphosphino)-2,2,2',2'-tetrafluoro-4,4'-bi-1,3-benzodioxole [(S)-DIFLUORPHOS]; X=Cl, Br, I) to produce the corresponding 2-aryl-1,2,3,4-tetrahydroquinoxalines. The additive effects of amines were investigated by solution dynamics studies of iridium complexes in the presence of N-methyl-p-anisidine (MPA), which was determined to be the best amine additive for achievement of a high enantioselectivity of (S)-2-phenyl-1,2,3,4-tetrahydroquinoxaline, and by labeling experiments, which revealed a plausible mechanism comprised of two cycles. One catalytic cycle was less active and less enantioselective; it involved the substrate-coordinated mononuclear complex [IrHCl(2) (2-phenylquinoxaline){(S)-BINAP}], which afforded half-reduced product 3-phenyl-1,2-dihydroquinoxaline. A poorly enantioselective disproportionation of this half-reduced product afforded (S)-2-phenyl-1,2,3,4-tetrahydroquinoxaline. The other cycle involved a more active hydride-amide catalyst, derived from amine-coordinated mononuclear complex [IrCl(2) H(MPA){(S)-BINAP}], which functioned to reduce 2-phenylquinoxaline to (S)-2-phenyl-1,2,3,4-tetrahydroquinoxaline with high enantioselectivity. Based on the proposed mechanism, an Ir(I) -JOSIPHOS (JOSIPHOS=(R)-1-[(S(p) )-2-(dicyclohexylphosphino)ferrocenylethyl]diphenylphosphine) catalyst in the presence of amine additive resulted in the highest enantioselectivity for the asymmetric hydrogenation of 2-phenylquinoxaline. Interestingly, the reaction rate and enantioselectivity were gradually increased during the reaction by a positive-feedback effect from the product amines.     

Hydrogenation versus transfer hydrogenation of ketones: two established ruthenium systems catalyze both

The established standard ketone hydrogenation (abbreviated HY herein) precatalyst [Ru(Cl)(2)((S)-tolbinap)[(S,S)-dpen]] ((S),(S,S)-1) has turned out also to be a precatalyst for ketone transfer hydrogenation (abbreviated TRHY herein) as tested on the substrate acetophenone (3) in iPrOH under standard conditions (45 degrees C, 45 bar H(2) or Ar at atmospheric pressure). HY works at a substrate catalyst ratio (s:c) of up to 10(6) and TRHY at s:c<10(4). Both produce (R)-1-phenylethan-1-ol ((R)-4), but the ee in HY are much higher (78-83 %) than in TRHY (4-62 %). In both modes, iPrOK is needed to generate the active catalysts, and the more there is (1-4500 equiv), the faster the catalytic reactions. The ee is about constant in HY and diminishes in TRHY as more iPrOK is added. The ketone TRHY precatalyst [Ru(Cl)(2)((S,S)-cyP(2)(NH)(2))] ((S,S)-2), established at s:c=200, has also turned out to be a ketone HY precatalyst at up to s:c=10(6), again as tested on 3 in iPrOH under standard conditions. The enantioselectivity is opposite in the two modes and only high in TRHY: with (S,S)-2, one obtains (R)-4 in up to 98 % ee in TRHY as reported and (S)-4 in 20-25 % ee in HY. iPrOK is again required to generate the active catalysts in both modes, and again, the more there is, the faster the catalytic reactions. The ee in TRHY are only high when 0.5-1 equivalents iPrOK are used and diminish when more is added, while the (low) ee is again about constant in HY as more iPrOK is added (0-4500 equiv). The new [Ru(H)(Cl)((S,S)-cyP(2)(NH)(2))] isomers (S,S)-9 A and (S,S)-9 B (mixture, exact structures unknown) are also precatalysts for the TRHY and HY of 3 under the same conditions, and (R)-4 is again produced in TRHY and (S)-4 in HY, but the lower ee shows that in TRHY (S,S)-9 A/(S,S)-9 B do not lead to the same catalysts as (S,S)-2. In contrast, the ee are in accord with (S,S)-9 A/(S,S)-9 B leading to the same catalysts as (S,S)-2 in HY. The kinetic rate law for the HY of 3 in iPrOH and in benzene using (S,S)-9 A/(S,S)-9 B/iPrOK or (S,S)-9 A/(S,S)-9 B/tBuOK is consistent with a fast, reversible addition of 3 to a five-coordinate amidohydride (S,S)-11 to give an (S,S)-11-substrate complex, in competition with the rate-determining addition of H(2) to (S,S)-11 to give a dihydride [Ru(H)(2)((S,S)-cyP(2)(NH)(2))] (S,S)-10, which in turn reacts rapidly with 3 to generate (S)-4 and (S,S)-11. The established achiral ketone TRHY precatalyst [Ru(Cl)(2)(ethP(2)(NH)(2))] (12) has turned out to be also a powerful precatalyst for the HY of 3 in iPrOH at s:c=10(6) and of some other substrates. Response to the presence of iPrOK is as before, except that 12 already functions well without it at up to s:c=10(6).     

RuCl2[(S)-P-Phos]-[(S)-DAIPEN]催化芳香酮的不对称加氢反应

研究了钌-双膦-二胺配合物催化剂RuCl2[(S)-P-Phos]-[(S)-DAIPEN] [P-Phos: 2,2',6,6'-四甲氧基-4,4'-双(二苯基膦基)-3,3'-二吡啶, DAIPEN: 1,1-二(4-甲氧苯基)-2-异丙基-1,2-乙二胺]催化芳香酮不对称加氢反应的性能, 考察了不同的碱、叔丁醇钾浓度、反应溶剂、底物/催化剂摩尔比等因素对反应活性和对映选择性的影响. 在苯乙酮、叔丁醇钾、催化剂的摩尔比为1000:20:1, 氢气压力为2 MPa, 反应温度为30 ℃时, 苯乙酮的转化率和α-苯乙醇的对映选择性(ee)分别达到了100%和88.5%, 2'-溴苯乙醇的ee 值可达97.1%.     

New chiral bis(oxazoline) Rh(I)-, Ir(I)- and Ru(II)-complexes for asymmetric transfer hydrogenations of ketones

Chiral bis(oxazoline)-based Rh(I)-, Ir(I)- and Ru(II)-complexes have been prepared and used for asymmetric transfer hydrogenation of prochiral ketones. The presence of a free hydroxyl group on the ligand is necessary for high enantioselectivity. With acetophenone, up to 50% conversion and 89% ee were achieved.     

Programmed assembly of two different ligands with metallic ions: generation of self-supported Noyori-type catalysts for heterogeneous asymmetric hydrogenation of ketones

Programmed assembly strategy has been first applied to the generation of self-supported Noyori-type catalysts for asymmetric hydrogenation of ketones by spontaneous heterocoordination of bridged diphosphine and diamine ligands with Ru(II) metallic ions. The immobilized catalyst demonstrates excellent enantioselectivity and activity in the heterogeneous catalysis of the hydrogenation of aromatic ketones and can be recovered and recycled at least seven times without obvious loss of selectivity and activity.     

trans-RuH(eta1-BH4)(binap)(1,2-diamine): a catalyst for asymmetric hydrogenation of simple ketones under base-free conditions

Reaction of a chiral RuCl2(diphosphine)(1,2-diamine) complex and NaBH4 forms trans-RuH(eta1-BH4)(diphosphine)(1,2-diamine) quantitatively. The TolBINAP/DPEN Ru complex has been characterized by single crystal X-ray analysis as well as NMR and IR spectra. The new Ru complexes allow for asymmetric hydrogenation of simple ketones in 2-propanol without an additional strong base. Various base-sensitive ketones are convertible to chiral alcohols in a high enantiomeric purity with a substrate/catalyst ratio of up to 100 000 under mild conditions. Configurationally unstable 2-isopropyl- and 2-methoxycyclohexanone can be kinetically resolved with a high enantiomer discrimination. This procedure overcomes the drawback of an earlier method using RuCl2(diphosphine)(diamine) and an alkaline base, which sometimes causes undesired reactions such as ester exchange, epoxy-ring opening, beta-elimination, and polymerization of ketonic substrates.     

Alkoxy substituted MeO-BIPHEP-type diphosphines ligands for asymmetric hydrogenation of aryl ketones

<正>In this paper,a series of optically active MeO-BIPHEP-type ligands,(S)-6,6′-dimethoxy-2,2'-bis(di-p-alkoxyphenylphosphine)- 1,1′-biphenyl were synthesized and used to prepare the ruthenium complex.The effects of para-substituted were observed,the results showed that the ruthenium catalysts[diphosphine RuCl_2 diamine]containing both t-Bu and i-Pr substitutions have better activities and enantioselectivities than the non-substituted ruthenium catalysts in the asymmetric hydrogenation of acetophenone.     

Asymmetric hydrogenation of isobutyrophenone using a [(Diphosphine) RuCl2 (1,4-diamine)] catalyst

[reaction: see text] The use of three chiral 1,4-diamines in the [(diphosphine) RuCl(2) (diamine)] catalyst system is demonstrated in the hydrogenation of acetophenone. The use of a 1,4-diamine offers unique properties that allow tuning of the catalyst system. These include the first example of the use of a racemic diamine in combination with a chiral phosphine, which gives 95% ee in the hydrogenation of isobutyrophenone.