Zur nomenklatur der phane—II

The new term “Phanes” has been clearly defined and a nomenclature system tentatively developed. This system is comprehensible and of general application and at the same time relatively simple. The notations “nucleus”, “bridge”, “number of bridge members” and “number of ring members” are defined. In order to get a definite characterisation of the phanes which contain a carbocyclic nucleus, a carbocyclic and heterocyclic bridge the following terms: “carbophanes”, “carba-phanes” and “hetera-phanes” have been newly introduced. The prefix “hetera-” has been proposed as a general expression and as a representative term for the syllables “aza-”, “oxa-”, “thia-” and so on. The so called “a-nomenclature” is clearly called “hetera-nomenclature”. The new expressions “heteralogous” and “substitulogous” are explained. As the various examples will show, the “Phane-Nomenclature” can also be applied to the naming of complicated metallocenophanes.     

Amine groups functionalized gel-type resin supported Pd catalysts: Physicochemical and catalytic properties in hydrogenation of alkynes

Palladium catalysts (0.125–0.5 wt.% Pd) supported by amine groups—functionalized gel-type resin (FCN) were studied in the hydrogenation of alkynes reagents, 2-butyne-1,4-diol and phenylacetylene. The catalysts were prepared by two routes. The first, “OAc” is based on the immobilization of Pd-precursor in the pre-swollen resin from THF solution of Pd(OAc)₂, followed by chemical reduction of the Pd-centers. This method produces Pd particles of size in nano-scale. The second procedure, “aq” implies the deposition of Pd-species on dry resin beads using aqueous solution of PdCl₂. Reduction of these Pd-species gives relatively large Pd particles, dominating are 30–50 nm in size. The SEM studies performed over the cross-section of catalysts grains showed location of Pd in outer shell of polymer beads in both “OAc” and “aq” catalysts; however, thinner layer of Pd appears in “aq” series catalysts. In the presence of all catalysts, prepared by “OAc” and “aq” methods the selectivity towards alkenes is high, above 90%. The catalysts of “aq’ series are much more active and more selective than “OAc” analogues giving selectivity to alkene ca. 94% at almost complete conversion of alkynes. Moreover, catalytic performance of “aq’ series catalyst is unchanged under recycling use. The catalyst was recovered and reused 4 times, maintaining its catalytic efficiency.     

Optical potential theory of diatom-diatom scattering. II. Indistinguishable molecules

The theory of vibro-rotational energy exchange in “indistinguishable” diatom-diatom scattering is formulated in terms of effective potentials. Due the necessity of considering both “symmetric” and “antisymmetric” molecular two-particle states, the formalism has a characteristic (two-by-two matrix structure. A mathematical generalization of Schwinger's theory of sources allows a compact derivation of exact and approximate expressions for t “optical” and “transition” potentials of elastic and inelastic processes, respectively. Finally, considerations based on a partial wave analysi of the working equations, suggest that the present theory should be more readily amenable to numerical implementations than the close coupling approach     

Bioinspired Total Synthesis of Complex Nucleoside Antibiotics A201A,A201D and A201E

Herein, bioinspired total syntheses of A201A, A201D, and A201E based on a previously reported biosynthetic pathway are presented. The challenging 1,2-cis-furanoside, a core structure of the A201 family, was obtained by remote 2-quinolinecarbonyl-assisted glycosylation. We accomplished the total synthesis of A201A and A201E based on the critical 1,2-cis-furanoside moiety through late-stage glycosylation without any interference from basic dimethyl adenosine. We also confirmed the absolute configuration of A201E by total synthesis. This modular synthesis strategy enables efficient preparation of A201 family antibiotics, allowing the study of their structure–activity relationships and mode of action. This study satisfies the increasing demand for developing novel antibiotics inspired by the A201 family.     

Bioinspired Total Synthesis of Complex Nucleoside Antibiotics A201A,A201D and A201E

Herein, bioinspired total syntheses of A201A, A201D, and A201E based on a previously reported biosynthetic pathway are presented. The challenging 1,2-cis-furanoside, a core structure of the A201 family, was obtained by remote 2-quinolinecarbonyl-assisted glycosylation. We accomplished the total synthesis of A201A and A201E based on the critical 1,2-cis-furanoside moiety through late-stage glycosylation without any interference from basic dimethyl adenosine. We also confirmed the absolute configuration of A201E by total synthesis. This modular synthesis strategy enables efficient preparation of A201 family antibiotics, allowing the study of their structure–activity relationships and mode of action. This study satisfies the increasing demand for developing novel antibiotics inspired by the A201 family.     

Kosmotrope character of maltose in water mixtures

It is well known that water plays a fundamental role for living beings, because the nature of water transformations provides for the ability to preserve biostructures. Solute can be classified as “kosmotropes” or “chaotropes” depending on the interaction strength with water. In the case of solutes destroying the natural hydrogen bonded network of water, called “kosmotropes” or “structure-makers”, the denaturation processes can be inhibited.

The aim of this work is to investigate the vibrational behaviour of maltose/H₂O mixtures in order to characterise the changes induced by the sugar on the H₂O hydrogen-bonded network. The obtained findings point out that maltose has a destructuring effect on the water tetrahedral network and emphasise its kosmotrope character.     

Evaluation of the surface tension measurement of axisymmetric drop shape analysis (ADSA) using a shape parameter

A quantitative criterion called “shape parameter” to evaluate the quality of surface tension measurement of Axisymmetric Drop Shape Analysis (ADSA) is presented. ADSA is a powerful technique for the measurement of interfacial tensions and contact angles of pendant drops, sessile drops, and bubbles. Despite the general success of ADSA, deficient results may be obtained for drops close to spherical shape. Therefore, the “shape parameter” was used to determine the range of drop shapes in which ADSA succeeds or fails. The “shape parameter” is a dimensionless parameter that expresses quantitatively the difference in shape between a given experimental profile and an inscribed circle. The surface tension measurements of ADSA were evaluated for both pendant drop and constrained sessile drop configurations using the shape parameter. Different shapes of the pendant drop were studied using different sizes and materials of holders. For each drop configuration, a “critical shape parameter” was defined based on the minimum value of the shape parameter that guarantees an error of less than ±0.1 mJ/m². Furthermore, the effects of the type of liquid and constellation on the “critical shape parameter” were studied.     

Semiempirical molecular orbital studies on p-quinodimethane. Electronic structure assignments based on total energies and comparisons with photoelectron and absorption spectra

The electronic structure of p-quinodimethane has been investigated using both CNDO/S and INDO molecular orbital approximations. It is found that the energetically favorable configuration is a “quinoid” construction leading to a spin-paired singlet ground state. Comparisons of the calculated excitation energies and orbital orderings with optical and photoemission measurements are consistent with this assignment. The “quinoid” configuration is found to be energetically unfavorable toward the formation of a low-lying triplet or “biradical”-like state. Charge density distributions, however, suggest a high ground state chemical reactivity.     

The behaviour of some selenoglycollic acid derivatives in aqueous solutions and spectrophotometric determination of constants of the system Pd(II)/ethylene-bis- selenoglycollic acid

Interactions between ethylselenoglycollic, selenoglycollic and ethylene-bis- selenoglycollic acids and some “soft”, “borderline” and “hard” metallic ions have been studied. The interactions of [PdCl₄]_aq²⁻ with the three ligands were verified conductometrically and spectrophotometrically. The stability constants β₁ and β₂ for the system [PdCl₄]^2-- ethylene-bis-selenoglycollic acid have been determined at 25°C at ionic strength 3.0 M (NaCl). The stoichiometric ionization constant of the mentioned acid was also studied.     

The “Facilitated Transition” hypothesis as an explanation for the gemdialkyl effect

A new technique of searching the conformational space of transition states was used to explore the cause of the rate acceleration in the gem-dialkyl effect in intramolecular cyclization reactions. Several previous hypotheses were discarded and a new hypothesis was advanced based on this new data. This hypothesis, the “Facilitated Transition” hypothesis, states that increased steric hindrance reduces the overall activation energy by facilitating rotation through the transition state. The older “Reactive Rotamer” hypothesis was eliminated by generating all conformations of the starting materials using the and computer programs and demonstrating that no relationship is found between rate increase and a change in the concentration of “reactive rotamers”.     

Preparation of alpha-elastin nanoparticles by gamma irradiation

Nanoparticles were prepared by utilizing the thermosensitive aggregation of alpha-elastin and gamma ray crosslinking. Three different heating process, “Slow heating”, “Fast heating”, and “Heat shock”, were applied for the aggregation of the alpha-elastin and examined to yield nanoparticles by gamma rays crosslinking. As a result, only “Slow heating” process yielded nanoparticles with diameters of about ca. 300 nm above cloud point (CP) and about ca. 100 nm below CP, and a narrow size distribution above 1.0 mg/ml concentration (exclude 1.0 mg/ml).     

Chemistry of the podocarpaceae—V The identification of miropinic acid and isomiropinic acid from Podocarpus ferrugineus D. Don

By reinvestigation of “isomiropinic” and “miropinic” acids from the bled resin of Podocarpus ferrugineus, the compounds have been identified as sugiol and isopimaric acid respectively. The identity of the resin acid from Dacrydium biforme has been confirmed as isopimaric acid.     

Investigation of the interactions between ginsenosides and amino acids by mass spectrometry and theoretical chemistry

In order to evaluate the essence of the interactions of ginsenosides and proteins which are composed by α-amino acids, electrospray ionization mass spectrometry was employed to study the noncovalent interactions between ginsenosides (Rb₂, Rb₃, Re, Rg₁ and Rh₁) and 18 kinds of α-amino acids (Asp, Glu, Asn, Phe, Gln, Thr, Ser, Met, Trp, Val, Gly, Ile, Ala, Leu, Pro, His, Lys and Arg). The 1:1 and 2:1 noncovalent complexes of ginsenosides and amino acids were observed in the mass spectra. The dissociation constants for the noncovalent complexes were directly calculated based on peak intensities of ginsenosides and the noncovalent complexes in the mass spectra. Based on the dissociation constants, it can be concluded that the acidic and the basic amino acids, Asp, Glu, Lys and Arg, bound to ginsenosides more strongly than other amino acids. The experimental results were verified by theoretical calculations of parameters of noncovalent interaction between ginsenoside Re and Arg which served as a representative example. Two kinds of binding forms, “head–tail” (“H–T”) and “head–head” (“H–H”), were proposed to explain the interaction between ginsenosides and amino acids. And the interaction in “H–T” form was stronger than that in “H–H” form.     

Spectres de rotation de la molécule de chlorobenzéne : I. Variétés isotopiques monosubstituées et structure rs

The microwave spectra of chlorobenzene “(1)-³⁵Cl”, all eight mono-[“(1)-³⁷Cl”, “(1)-³⁵Cl, (2)D”, “(1)-³⁵Cl, (3)D”, “(1)-³⁵Cl, (4)D”, “(1)-³⁵Cl, (1)-¹³C”, “(1)-³⁵Cl, (2)-¹³C”, “(1)-³⁵Cl, (3)-¹³C”, “(1)-³⁵Cl, (4)-¹³C”], one di[“(1)-³⁵Cl, (2,6)D₂,”] and one trisubstituted species [“(1)-³⁷Cl, (2,6)D₂”] have been investigated. From the moments of inertia of the vibrational ground state the r_s structure was derived. The reliability of the two small a coordinates could be enhanced through use of the multiply substituted species. The errors of the moments of inertia were propagated to the structural parameters. It could be shown that the benzene ring is deformed. However the quantitative deformation could not be established due to the rather large errors of some structural parameters.     

On the ionic conductivity and phase transitions in the Li2SO4---Li2WO4 system and their relation to ion transport mechanism

Secco et al. have performed several measurements of ionic conductivity, which they have considered as “convincing evidence” that the “paddle-wheel” mechanism does not contribute significantly to ion conductivity in Li₂SO₄-based compositions. However, a comparison of their results in the high-conductivity range with those of other investigators suggests that their data are artifacts. The cause of this is that the resistance of their sulfate-rich samples is about 0.1 ohm at high temperatures. Thus, their results are reliable only for “normal,” i.e., low, conductivities. It is briefly summarized why the “paddle-wheel” mechanism for ion transport is superior to a percolation-type mechanism for a few high-conducting phases.     

Comparison of chemometric methods for brand classification of cigarettes by near-infrared spectroscopy

The combinations of NIR spectroscopy and three classification algorithms, i.e., multi-class support vector machine (BSVM), k-nearest neighbor (KNN) and soft independent modeling of class analogies (SIMCA), for discriminating different brands of cigarettes, were explored. The influence of the training set size on the relative performance of each algorithm was also investigated. A NIR spectral dataset involving the classification of cigarettes of three brands was used for illustration. Three performance criteria based on “correctly classified rate (CCR)”, i.e., “Average CCR”, “95 percentile of CCR” and “S.D. of CCR”, were defined to compare different algorithms. It was revealed that BSVM is significantly better than KNN or SIMCA in the statistical sense, especially in cases where the training set is relatively small. The results suggest that NIR spectroscopy together with BSVM could be an alternative to traditional methods for discriminating different brands of cigarettes.     

The quantitative determination of fission and nuclear reaction products

Definitions are given to the terms “per cent atom burn-up” and “per cent atoms consumed” as applied to nuclear fuel analysis at the Argonne National Laboratory. The radiochemical and analytical methods which have been adapted and developed especially for this type of analysis are discussed. The analysis of nuclear reaction products by paper chromatographic methods and scintillation spectrometry is emphasised and demonstrated.     

Protein-coated β-ferric hydrous oxide particles: An electrokinetic and electrooptic study

Using microelectrophoresis and electric light scattering techniques, we investigated the adsorption characteristics, surface coverage and surface electric parameters of superstructures from two isoforms of plastocyanin, PCa and PCb, in an oxidized state adsorbed on β-ferric hydrous oxide particles. The surface electric charge and electric dipole moments of the composite particles and the thickness of the protein adsorption layer are determined in a wide pH range, at different ionic strengths and concentration ratios of PC to β-FeOOH. The adsorption of the two proteins was found to shift the particles’ isoelectric point and to alter the total electric charge and the electric dipole moments of the oxide particles to different extent. A “reversal” in the direction of the permanent dipole moment is observed at lower pH for PCb- than for PCa-coated oxide particles. Strict correlation is found between the changes in the electrokinetic charge of the composite particles and the variation in their “permanent” dipole moments. Data suggest that the adsorption of the proteins is driven by electrostatic and/or hydrophobic interactions with the oxide surfaces dependent on pH. The adsorption behaviour is consistent with the involvement of the “eastern” and “northern” patches of the plastocyanin molecules in their adsorption on the oxide surfaces that are differently charged depending on pH.     

Reply to “Comments on the paper entitled ‘The formulation and modelling of the anodic dissolution of zinc through adsorbed intermediates’ ” by C. Cachet et al.

The points raised in the paper entitled “Comments on the paper entitled ‘The formulation and modelling of the anodic dissolution of zinc through adsorbed intermediates”’ have been discussed. It has been shown that, in contrast to the statements in the “Comments”, most of the papers concerning the reaction schemes suggested for the interpretation of the dissolution or deposition of metals, which were considered as a support for the opinion of the Authors of the “Comments”, support the views expressed in our original paper [J. Electroanal. Chem. 583 (2005) 148]. On the other hand, it has been stressed again that the criticism expressed in the original paper refers to dubious conclusions drawn on the basis of transient measurements.