Experimental investigation of the parameter dependency of the removal rate of thermochemically polished CVD diamond films

Parameters controlling the removal rate of chemical vapor deposition (CVD) diamond films thermochemically polished on transition metals in a mixed argon-hydrogen atmosphere were investigated. The ambient temperature, the pressure exerted on the diamond film, the angular velocity of the polishing plate, the frequency and the amplitude of the transverse vibrations were among the parameters used in the experiments. Temperature measurements showed that the removal rate was increased exponentially with increasing magnitude of the parameter. An exponential increase in the removal rate was also observed with increasing pressure and hence with increasing contact between the diamond film and the polishing plate. However, an exponential decrease in the removal rate was observed with increasing angular velocity of the polishing plate. The removal rate obtained with the application of transverse vibrations was more than three times that obtained without transverse vibrations. Moreover, the removal rate was seen to be higher at resonant frequencies. An increase in the removal rate with increasing amplitude of the transverse vibrations was also observed. Raman measurements carried out on the films to determine the presence of the non-diamond carbon layer after thermochemical polishing revealed non-diamond Raman lines only for films polished at 1000 °C and 1050 °C for the temperature range 750–1050 °C. Received: 27 October 1999 / Accepted: 2 February 2000     

Synthesis of Aryl(hetero)methylene-1,3-indandione Based Molecular Glasses

Summary. Novel glass-forming 2-(1-phenyl-1,2,3,4-tetrahydroquinoline-6-ylmethylene)-1,3-indandione derivatives were synthesized and their thermal properties were studied. The results of a preliminary investigation of the photoelectric properties of amorphous films of the title compounds are briefly reported. The ionization potential of these molecular glasses is ca. 5.6 eV and the hole drift mobility exceeds 10⁻⁸ cm² V⁻¹ s⁻¹ at strong electric fields.     

Electrical characterization of poly(3-methylthiophene) electrosynthesized onto a tin-oxide substrate

We have investigated poly(3-methylthiophene) (PMeT) thin films electrochemically synthesized directly onto a tin-oxide (TO) electrode. We find that the PMeT film thickness depends linearly on the charge density used during the electropolymerization. We have demonstrated that the current transport in PMeT films (solid phase) is space-charge limited or controlled by thermionic emission, depending on the electrode material. Using TO/PMeT/Ni devices we estimate the positive charge carrier mobility in PMeT to be around 4 × 10⁻⁴ cm² V⁻¹ s⁻¹, and the potential barrier height for positive charge carrier injection at the Al/PMeT interface to be 0.17 eV. Received: 6 December 1999 / Accepted: 24 February 2000     

The parathiocyanogen electrode

Stable, yellow anodic films of parathiocyanogen (SCN) _x were formed on a platinum electrode from 2.8 M KSCN in methanol at 45 °C at a constant current of 20–40 mA cm⁻² for 15–30 min. Loosely bound orange crystals of a more amorphous character were removed by rinsing to leave an adherent yellow film with sharp Raman bands under 647.1 nm laser excitation at 627 cm⁻¹ (vCS), 1152 cm⁻¹ and 1236–1261 cm⁻¹ (vNN and vCN). The lack of electroactivity and short-lived photocurrents pointed to an insulating film at potentials up to 1.0 V (SHE). At more positive potentials, longer-lasting photocurrents were obtained, consistent with breakdown of the insulating film. XPS scans confirmed N:C:S ratios close to 1:1:1, with a deficiency of S of some 10% due to S lost as sulfate at the film surface. Oxidation of SeCN⁻ in neutral aqueous solution led to the formation of a less-stable orange paraselenocyanogen film with a Raman band at 1256–1267 cm⁻¹, which decomposed within a day to grey selenium. Received: 12 December 1997 / Accepted: 23 March 1998     

Colorimetric Microdetermination of Mercury(II) with Some Quinoxaline Azo Compounds in Presence of an Anionic Surfactant

Summary.  A new simple, rapid, sensitive, and selective method is proposed for the microdetermination of mercury. Mercury(II) forms insoluble complexes with 2,3-dichloro-6-(2-hydroxy-3,5-dinitrophenylazo)-quinoxaline (1), 2,3-dichloro-6-(5-amino-3-carboxy-2-hydroxy-phenylazo)-quinoxaline (2), 2,3-dichloro-6-(2,7-dihydroxynaphth-1-ylazo)-quinoxaline (3), and 2,3-dichloro-6-(3-carboxy-2-hydroxy-naphth-1-ylazo)-quinoxaline (4) in aqueous acidic medium; the complexes can be made soluble by the action of an anionic surfactant. The solution of the pink coloured compounds is stable for at least 24 h. Beer’s law is obeyed over the concentration range from 0.1 to 2.8 μg · cm⁻³ of mercury. For a more accurate analysis, Ringbom optimum concentration ranges were found to be 0.25–2.5 μg · cm⁻³. The molar absorpitivity, Sandell sensitivity, and relative standard deviations were also calculated. A slight interference from Pd²⁺ and Cd²⁺ is exhibited by the first three ligands, whereas the last one is only negligibly affected by these metal ions. Strong interference from Ag(I) is evident for all ligands, whereas alkali, alkaline earth, and other transition metals tested posed negligible interference. 15 μg · cm⁻³ of Cd²⁺ and Pd²⁺ or 10 μg · cm⁻³ of Ag⁺ can be tolerated if 1.0 mg of potassium bromide and 2.0 mg of citrate as masking agents are added for the determination of 1.5 μg · cm⁻³ of mercury(II). The method was applied to the determination of methyl- and ethylmercury chloride and the analysis of environmental water samples. Received August 7, 2000. Accepted (revised) October 18, 2000     

Flavonol Derivatives for Determination of Cr(III) and W(VI)

 Simple, rapid, sensitive and selective methods for the determination of Cr(III) and W(VI) with flavonol derivatives in the presence of surface-active agents are proposed. In the pH ranges 3.4–4.2 and 1.9–2.5, the molar absorptivities of Cr(III)-morin-emulsifier S (EFA) and W(VI)-morin-polyvinylpyrrolidone (PVP) systems are 1.13×10⁵ and 2.13×10⁴ L mol⁻¹ cm⁻¹ at 435 and 415 nm, respectively. The Cr(III)-quercetin-PVP and W(VI)-quercetin-cetylpyridinium bromide (CPB) systems are formed in the pH ranges 4–4.6 and 2.2–2.8 with molar absorptivities 1.02×10⁵ and 9.02×10⁴ L. mol⁻¹ cm⁻¹ at 441 and 419 nm, respectively. The linear dynamic ranges for the determination of Cr(III) and W(VI) with morin in the presence of EFA and PVP are 0.03–0.46 and 0.71–8.1 μg mL⁻¹, respectively. The corresponding ranges with quercetin are 0.04–0.54 and 0.14–2.1 μg mL⁻¹ of Cr(III) and W(VI), respectively. The r.s.d (n = 10) for the determination of 0.25 and 3.7 μg mL⁻¹ of Cr(III) and W(VI) with morin and their detection limits are 0.88 and 0.99% and 0.016 and 0.63 μg mL⁻¹, respectively. Using quercetin, the r.s.d (n = 10) for 0.22 and 1.2 μg mL⁻¹ of Cr(III) and W(VI) and their detection limits are 0.92 and 0.91% and 0.015 and 0.08 μg mL⁻¹, respectively. The critical evaluation of the proposed methods is performed by statistical analysis of the experimental data. The proposed methods are applied to determine Cr in steel, non-ferrous alloys, wastewater and mud filtrate and to the determination of W in steel. Received March 8, 1999. Revision January 21, 2000.     

Selective Indicator Reaction for Kinetic Determination of Traces of Manganese(II), Ribavirin and Tiazofurin

 In this work it was established that, in the presence of ammonium carbonate, traces of manganese(II) catalyse the oxidation of Nile Blue A by hydrogen peroxide, which enables its kinetic determination in the concentration range from 6.6 to 65.9 ng cm⁻³, the detection limit being 8.0 × 10⁻² ng cm⁻³. Antiviral/antitumour substances modify the catalytic activity of manganese(II): 1-β-D-ribofuranosyl-1,2,4-triazole-3-carboxamide, ribavirin, increases the catalytic effect of manganese(II), while 2-β-D-ribofuranosyl-thiazole-4-carboxamide, tiazofurin, acts as an inhibitor. On the basis of these effects, a kinetic method for determining ribavirin concentrations from 0.5 × 10⁻¹ to 4.0 × 10⁻¹ μg cm⁻³ and tiazofurin concentrations from 0.3 to 2.6 μg cm⁻³ is proposed. The kinetics of the indicator reaction were studied in the presence of the substances examined, the kinetic equations established, and the constants of the corresponding reaction rates calculated. The effect of temperature on these reactions was also investigated. The method was applied to the determination of manganese(II) in mineral water and ribavirin in pharmaceutical preparations. Received December 16, 1999. Revision June 6, 2000.     

Immobilization of flavine adenine dinucleotide onto nickel oxide nanostructures modified glassy carbon electrode: fabrication of highly sensitive persulfate sensor

A simple method was used to fabricate flavin adenine dinucleotide (FAD)/NiOx nanocomposite on the surface of glassy carbon (GC) electrode. Cyclic voltammetry technique was applied for deposition nickel oxide nanostructures onto GC surface. Owing to its high biocompatibility and large surface area of nickel oxide nanomaterials with immersing the GC/NiOx-modified electrode into FAD solution for a short period of time, 10–140 s, a stable thin layer of the FAD molecules immobilized onto electrode surface. The FAD/NiOx films exhibited a pair of well-defined, stable, and nearly reversible CV peaks at wide pH range (2–10). The formal potential of adsorbed FAD onto nickel oxide nanoparticles film, E ^o′ vs. Ag/AgCl reference electrode is −0.44 V in pH 7 buffer solutions was similar to dissolved FAD and changed linearly with a slope of 58.6 mV/pH in the pH range 2–10. The surface coverage and heterogeneous electron transfer rate constant (k _s ) of FAD immobilized on NiOx film glassy carbon electrode are 4.66 × 10⁻¹¹ mol cm⁻² and 63 ± 0.1 s⁻¹, indicating the high loading ability of the nickel oxide nanoparticles and great facilitation of the electron transfer between FAD and nickel oxide nanoparticles. FAD/NiOx nanocomposite-modified GC electrode shows excellent electrocatalytic activity toward S₂O₈²⁻ reduction at reduced overpotential. Furthermore, rotated modified electrode illustrates good analytical performance for amperometric detection of S₂O₈²⁻. Under optimized condition, the concentration calibration range, detection limit, and sensitivity were 3 μM–1.5 mM, 0.38 μM and 16.6 nA/μM, respectively.     

Properties of ITO films prepared by reactive magnetron sputtering

Indium tin oxide (ITO) thin films were deposited by mid frequency pulsed dual magnetron sputtering using a metallic alloy target with 10 wt.% tin in an atmosphere of argon and oxygen. The aim of the work was to study the interdependence of structural, electrical and optical properties of ITO films deposited in the reactive and transition target mode, respectively. The deposition rate in the transition mode exceeds the deposition rate in the reactive mode by a factor of six, a maximum value of 100 nm·m min⁻¹ could be achieved. This corresponds to a static deposition rate of 200 nm min⁻¹. The lowest electrical resistivity of 1.1·10⁻³ Ω cm was measured at samples deposited in the high oxygen flow range in the transition mode. The samples show a good transparency in the visible range corresponding to extinction coefficients being below 10⁻². X-ray diffraction was used to characterise crystalline structure as well as film stress. ITO films prepared in the transition mode show a slightly preferred orientation in (211) direction, whereas films deposited in the reactive mode are strongly (222) oriented. Compared to undoped In₂O₃ all samples have an enlarged lattice. The lattice strain perpendicular to the surface is about 0.8% and 2.0% for films grown in the transition and the reactive mode, respectively. Deposition in the transition mode introduces a biaxial film stress in the range of −300 MPa, while stress in reactive mode samples is −1500 MPa.     

Effect of Al doping on the conductivity type inversion and electro-optical properties of SnO2 thin films synthesized by sol-gel technique

Al doped SnO₂ thin films have been synthesized by a sol-gel dip coating technique with different percentages of Al on glass and silicon substrates. X-ray diffraction studies confirmed the proper phase formation in the films and atomic percentage of aluminium doping in the films was obtained by energy dispersive X-ray studies. SEM studies showed the particle sizes lying in the range 100–150 nm for the undoped films and it decreased with increase of Al doping. Optical transmittance spectra of the films showed high transparency (∼80%) in the visible region and the transparency increases with the increase of Al doping in the films. The direct allowed bandgap of the films have been measured for different Al concentration and they lie within the range of 3.87–4.21 eV. FTIR studies depicted the presence of Sn–O, Al–O, bonding within the films. The room temperature electrical conductivities of the films are obtained in the range of 0.21 S cm⁻¹ to 1.36 S cm⁻¹ for variation of Al doping in the films 2.31–18.56%. Room temperature Seebeck coefficients, S_RT of the films were found in the range +56.0 μVK⁻¹ to −23.3 μVK⁻¹ for variation of Al doping in the films 18.56–8.16%. It is observed that the Seebeck coefficient changes its sign at 12.05% of Al in the films indicating that below 12.05% of Al doping, SnO₂:Al behaves as an n-type material and above this percentage it is a p-type material.     

Kinetic and maximum-absorbance spectrophotometric methods for the determination of olanzapine

Two simple and sensitive spectrophotometric methods were developed for the determination of olanzapine (OLZ) based on its oxidation with potassium iodate in a sulfuric acid medium to produce an intense violet-colored species exhibiting a maximum absorbance at 537 nm. The initial rate of formation and the maximum absorbance of the violet-colored oxidized product were monitored, in the first and second methods. The various experimental parameters affecting the rate of development and stability of the oxidized product were carefully studied and optimized. Beer’s law was obeyed up to 4.0 and 7.0 μg cm⁻³ OLZ with correlation coefficients of 0.998 and 0.996 (n = 6) and detection limits of 0.1 and 0.15 μg cm⁻³, for the initial rate and maximum absorbance methods. The proposed methods were conveniently applied to the determination of OLZ in its dosage forms and in spiked serum samples.     

Tetracyanoquinodimethanide adsorbed on a silica gel modified with titanium oxide for electrocatalytic oxidation of hydrazine

The electrocatalytical oxidation of hydrazine at low potential using tetracyanoquinodimethanide adsorbed on silica modified with titanium oxide was investigated by cyclic voltammetry and amperometry. The modified electrode was prepared modifying a carbon paste electrode employing lithium tetracyanoquinodimethanide adsorbed onto silica gel modified with titanium oxide. This electrode showed an excellent catalytic activity and stability for hydrazine oxidation. With this modified electrode, the oxidation potential of hydrazine was shifted toward less positive value, presenting a peak current much higher than those observed on a bare GC electrode. The linear response range, sensitivity and detection limit were, respectively, 2 up to 100 μmol l⁻¹, 0.36 μA l μmol⁻¹, and 0.60 μmol l⁻¹. The repeatability of the modified electrode evaluated in term of relative standard deviation was 4.2% for 10 measurements of 100 μmol l⁻¹ hydrazine solution. The number of electrons involved in hydrazine oxidation (4), the heterogenous electron transfer rate constant (1.08 × 10³ mol⁻¹ l s⁻¹), and diffusion coefficient (5.9 × 10⁻⁶ cm² s⁻¹) were evaluated with a rotating disk electrode.     

A theoretical study of the acetylide anion, HCC−

The results of various ab initio calculations are reported for the electronic ground state of the acetylide anion. An “Eyring's lake” in the T-shaped configuration is identified with six different methods (SCF, MP2, CCSD, CCSD-T, CCSD(T), and CEPA–1). The equilibrium bond lengths of HCC⁻ are estimated to be r _e (CH)=1.0689(3) ? and R _e (CC)=1.2464(2) ?, and the ground-state rotational constant is predicted to be B ₀=41636(20)MHz. The large permanent dipole moment of μ₀=−3.093D should facilitate detection of the anion by microwave spectroscopy. The band centers are predicted to be 3211.3cm⁻¹(ν₁), 511.1cm⁻¹(ν₂), and 1805.0cm⁻¹(ν₃). A large transition dipole moment of 0.477 D is calculated for the ν₂ band. Rovibrational levels of HCC⁻ up to approximately 20 000 cm⁻¹ above equilibrium are calculated with DVR-DGB and FBR methods on the basis of a previous CEPA–1 potential energy surface. Different energy patterns are found and discussed, for which anharmonic and Coriolis resonances are shown to play an important role. Received: 27 July 1998 Accepted: 12 August 1998 / Published online: 19 October 1998     

Simultaneous First Derivative Spectrophotometric Determination of Palladium and Nickel Using 2-(2-Thiazolylazo)-5-Dimethylaminobenzoic Acid as an Analytical Reagent

 A simple, rapid, selective, sensitive and economical method has been developed for the simultaneous determination of trace amounts of palladium and nickel in aqueous methanolic medium using 2-(2-thiazolylazo)-5-dimethylam inobenzoic acid as an analytical reagent by first derivative spectrophotometr y. Palladium is determined by measuring base to peak distance at λ=695.0 nm while nickel is estimated by zero crossing method in the mixture. The linearity is maintained between 0.12–1.75 μg mL⁻¹ for palladium and 0.07–1.60 μg mL⁻¹ for nickel in the pH range 2.8–7.2 and 3.4–8.8 respectively. Seven replicate determinations of 1.0 μ g mL⁻¹ of palladium and 0.8 μg mL⁻¹ of nickel in a mixture give a mean signal height of 0.391 for Pd and 0.541 for Ni with relative standard deviations of 0.9% and 1.2%, respectively. The sensitivity of the proposed method is 0.391 (dA/dλ)/(μg mL⁻¹) for palladium and 0.685 (dA/dλ)/(μg mL⁻¹) for nickel. Various parameters have been optimised for the simultaneous determination of palladium and nickel in various complex samples. Received March 30, 1999. Revision November 25, 1999.     

Voltammetric investigation and amperometric detection of the bisphosphonate drug sodium alendronate using a copper nanoparticles-modified electrode

The electrochemical behavior of sodium alendronate on copper microparticle- and copper nanoparticle-modified carbon paste electrodes was investigated. In the voltammograms recorded using microparticles, a single anodic oxidation peak appeared, while using nanoparticles, two anodic peaks appeared. The anodic currents were related to the electrocatalytic oxidation of alendronate via the active species of Cu(III). The catalytic rate constant for the electrocatalytic oxidation process and the diffusion coefficient of alendronate were obtained to be 1.57 × 10³ cm³ mol⁻¹ s⁻¹ and 2.44 × 10⁻⁶ cm² s⁻¹, respectively. A sensitive and time-saving detection procedure was developed for the analysis of alendronate, and the corresponding analytical parameters were reported. Alendronate was determined with a limit of detection of 11.26 μmol L⁻¹ with a linear range of 50–6,330 μmol L⁻¹. The proposed amperometric method was applied to the analysis of commercial pharmaceutical tablets, and the results were in good agreement with the declared values.     

Electrochemistry and electrocatalytic activity of polypyrrole/ferrocyanide films on a glassy carbon electrode

Functionalized polypyrrole films were prepared by incorporation of Fe(CN)₆ ³⁻ as doping anion during the electropolymerization of pyrrole at a glassy carbon electrode from aqueous solution. The electrochemical behavior of the Fe(CN)₆ ³⁻/Fe(CN)₆ ⁴⁻ redox couple in polypyrrole was studied by cyclic voltammetry. An obvious surface redox reaction was observed and dependence of this reaction on the solution pH was illustrated. The electrocatalytic ability of polypyrrole film with ferrocyanide incorporated was demonstrated by oxidation of ascorbic acid at the optimized pH of 4 in a glycine buffer. The catalytic effect for mediated oxidation of ascorbic acid was 300 mV and the bimolecular rate constant determined for surface coverage of 4.5 × 10⁻⁸ M cm⁻² using rotating disk electrode voltammetry was 86 M⁻¹ s⁻¹. Furthermore, the catalytic oxidation current was linearly dependent on ascorbic acid concentration in the range 5 × 10⁻⁴–1.6 × 10⁻² M with a correlation coefficient of 0.996. The plot of i _p versus v ^1/2 confirms the diffusion nature of the peak current i _p. Received: 12 April 1999 / Accepted: 25 May 1999     

Kinetic and maximum-absorbance spectrophotometric methods for the determination of olanzapine

Two simple and sensitive spectrophotometric methods were developed for the determination of olanzapine (OLZ) based on its oxidation with potassium iodate in a sulfuric acid medium to produce an intense violet-colored species exhibiting a maximum absorbance at 537 nm. The initial rate of formation and the maximum absorbance of the violet-colored oxidized product were monitored, in the first and second methods. The various experimental parameters affecting the rate of development and stability of the oxidized product were carefully studied and optimized. Beer’s law was obeyed up to 4.0 and 7.0 μg cm⁻³ OLZ with correlation coefficients of 0.998 and 0.996 (n = 6) and detection limits of 0.1 and 0.15 μg cm⁻³, for the initial rate and maximum absorbance methods. The proposed methods were conveniently applied to the determination of OLZ in its dosage forms and in spiked serum samples. Correspondence: Ashraf A. Mohamed, Department of Chemistry, Faculty of Science, King Faisal University, P.O. Box 1759, Al-Hassa-31982, Saudi Arabia.     

Determination of the Molar Decadic Absorptivities of the Stretching Vibrations of the Hydride and Phenyl Groups on Aerosil® 300

 The hydride and phenyl groups on the silica surface were determined qualitatively and quantitatively. The calculation of the molar decadic absorptivities of the Si*H-stretching vibration band at 2293 cm⁻¹ and of the C*H-stretching vibration band at 3068 cm⁻¹ was carried out according to Lambert-Beer’s law.     

FAD-modified SiO2/ZrO2/C ceramic electrode for electrocatalytic reduction of bromate and iodate

SiO₂/ZrO₂/C carbon ceramic material with composition (in wt%) SiO₂ = 50, ZrO₂ = 20, and C = 30 was prepared by the sol–gel-processing method. A high-resolution transmission electron microscopy image showed that ZrO₂ and the graphite particles are well dispersed inside the matrix. The electrical conductivity obtained for the pressed disks of the material was 18 S cm⁻¹, indicating that C particles are also well interconnected inside the solid. An electrode modified with flavin adenine dinucleotide (FAD) prepared by immersing the solid SiO₂/ZrO₂/C, molded as a pressed disk, inside a FAD solution (1.0 × 10⁻³ mol L⁻¹) was used to investigate the electrocatalytic reduction of bromate and iodate. The reduction of both ions occurred at a peak potential of −0.41 V vs. the saturated calomel reference electrode. The linear response range (lrr) and detection limit (dl) were: BrO₃ ⁻, lrr = 4.98 × 10⁻⁵–1.23 × 10⁻³ mol L⁻¹ and dl = 2.33 μmol L⁻¹; IO₃ ⁻, lrr = 4.98 × 10⁻⁵ up to 2.42 × 10⁻³ and dl = 1.46 μmol L⁻¹ for iodate.     

Voltammetry and amperometric detection of tetracyclines at multi-wall carbon nanotube modified electrodes

The voltammetric behaviour and amperometric detection of tetracycline (TC) antibiotics at multi-wall carbon nanotube modified glassy carbon electrodes (MWCNT-GCE) are reported. Cyclic voltammograms of TCs showed enhanced oxidation responses at the MWCNT-GCE with respect to the bare GCE, attributable to the increased active electrode surface area. Hydrodynamic voltammograms obtained by flow-injection with amperometric detection at the MWCNT-GCE led us to select a potential value E _det = +1.20 V. The repeatability of the amperometric responses was much better than that achieved with bare GCE (RSD ranged from 7 to 12%), with RSD values for i _p of around 3%, thus demonstrating the antifouling capability of MWCNT modified electrodes. An HPLC method with amperometric electrochemical detection (ED) at the MWCNT-GCE was developed for tetracycline, oxytetracycline (OTC), chlortetracycline and doxycycline (DC). A mobile phase consisting of 18:82 acetonitrile/0.05 mol L⁻¹ phosphate buffer of pH 2.5 was selected. The limits of detection ranged from 0.09 μmol L⁻¹ for OTC to 0.44 μmol L⁻¹ for DC. The possibility to carry out multiresidue analysis is demonstrated. The HPLC-ED/MWCNT-GCE method was applied to the analysis of fish farm pool water and underground well water samples spiked with the four TCs at 2.0 × 10⁻⁷ mol L⁻¹. Solid-phase extraction was accomplished for the preconcentration of the analytes and clean-up of the samples. Recoveries ranged from 87 ± 6 to 99 ± 3%. Under preconcentration conditions, limits of detection in the water samples were between 0.50 and 3.10 ng mL⁻¹.