A new class of (mu-eta2:eta2-disulfido)dicopper complexes: synthesis, characterization, and disulfido exchange

Rare examples of (mu-eta2:eta2-disulfido)dicopper complexes have been prepared from Cu(I) and Cu(II) complexes of beta-diketiminate and anilido-imine supporting ligands. A novel byproduct derived from sulfur functionalization of the methine position of a beta-diketiminate ligand was identified. DFT calculations on [(LCu)2X2] (L = beta-diketiminate, X = O or S) complexes rationalize the absence of a bis(mu-sulfido)dicopper isomer, [Cu2(mu-S)2](2+), in the synthetic reactions, yet predict that a [Cu2(mu-S)2](0) core is a stable product of 2-electron reduction of the [Cu2(mu-eta2:eta2-S2)](2+) unit. Exchange of the disulfido ligand was discovered upon reaction of a (mu-eta2:eta2-disulfido)dicopper complex with a Cu(I) reagent.     

Ligand structural effects on Cu2S2 bonding and reactivity in side-on disulfido-bridged dicopper complexes

To assess supporting ligand effects on S-S bond activation, a series of [Cu2(mu-eta2:eta2-S2)]2+ complexes supported by various beta-diketiminate or anilido-imine ligands (L) were synthesized via the reaction of Cu(I) precursors LCu(CH(3)CN) with S8. For the cases where L = beta-diketiminate, the syntheses were complicated by formation of clusters [Cu(SR)]4, where SR represents the ligand functionalized by sulfur at the central methine position. The [Cu2(mu-eta2:eta2-S2)]2+ products were characterized by X-ray crystallography and electronic absorption and resonance Raman spectroscopy. Correlations among the Cu-S, Cu-Cu, and S-S distances and the nu(S-S) values were observed and interpreted within the framework of a previously described bonding picture (Chen, P.; Fujisawa, K.; Helton, M. E.; Karlin, K. D.; Solomon, E. I. J. Am. Chem. Soc. 2003, 125, 6394). Comparison of these data to those for other relevant species revealed a remarkable degree of S-S bond activation in the compounds supported by the beta-diketiminate and anilido-imine ligands, which through strong electron donation increase backbonding from the copper ions into the S-S sigma* orbital and cause S-S bond weakening. Reactions of one of the complexes supported by an anilido-imine ligand with PPh(3) and xylyl isocyanide were explored, revealing facile transfer of sulfur to PPh(3) but only displacement of sulfur to yield a LCu(I)-CNAr (Ar = xylyl) complex with the isocyanide.     

Exceptional affinity of nanostructured organic-inorganic hybrid materials towards dioxygen: confinement effect of copper complexes

We report the exceptional reactivity towards dioxygen of a nanostructured organic-inorganic hybrid material due to the confinement of copper cyclam within a silica matrix. The key step is the metalation reaction of the ligand, which can occur before or after xerogel formation through the sol-gel process. The incorporation of a Cu(II) center into the material after xerogel formation leads to a bridged Cu(I)/Cu(II) mixed-valence dinuclear species. This complex exhibits a very high affinity towards dioxygen, attributable to auto-organization of the active species in the solid. The remarkable properties of these copper complexes in the silica matrix demonstrate a high cooperative effect for O(2) adsorption; this is induced by close confinement of the two copper ions leading to end-on mu-eta(1):eta(1)-peroxodicopper(II) complexes. The anisotropic packing of the tetraazamacrocycle in a lamellar structure induces an exceptional reactivity of these copper complexes. We show for the first time that the organic-inorganic environment of copper complexes in a silica matrix fully model the protecting role of protein in metalloenzymes. For the first time an oxygenated dicopper(II) complex can be isolated in a stable form at room temperature, and the reduced Cu(2) (I,I) species can be regenerated after several adsorption-desorption cycles. These data also demonstrate that the coordination scheme and reactivity of the copper cyclams within the solid are quite different from that observed in solution.     

Fine-tuning of copper(I)-dioxygen reactivity by 2-(2-pyridyl)ethylamine bidentate ligands

Copper(I)-dioxygen reactivity has been examined using a series of 2-(2-pyridyl)ethylamine bidentate ligands (R1)Py1(R2,R3). The bidentate ligand with the methyl substituent on the pyridine nucleus (Me)Py1(Et,Bz) (N-benzyl-N-ethyl-2-(6-methylpyridin-2-yl)ethylamine) predominantly provided a (mu-eta(2):eta(2)-peroxo)dicopper(II) complex, while the bidentate ligand without the 6-methyl group (H)Py1(Et,Bz) (N-benzyl-N-ethyl-2-(2-pyridyl)ethylamine) afforded a bis(mu-oxo)dicopper(III) complex under the same experimental conditions. Both Cu(2)O(2) complexes gradually decompose, leading to oxidative N-dealkylation reaction of the benzyl group. Detailed kinetic analysis has revealed that the bis(mu-oxo)dicopper(III) complex is the common reactive intermediate in both cases and that O[bond]O bond homolysis of the peroxo complex is the rate-determining step in the former case with (Me)Py1(Et,Bz). On the other hand, the copper(I) complex supported by the bidentate ligand with the smallest N-alkyl group ((H)Py1(Me,Me), N,N-dimethyl-2-(2-pyridyl)ethylamine) reacts with molecular oxygen in a 3:1 ratio in acetone at a low temperature to give a mixed-valence trinuclear copper(II, II, III) complex with two mu(3)-oxo bridges, the UV-vis spectrum of which is very close to that of an active oxygen intermediate of lacase. Detailed spectroscopic analysis on the oxygenation reaction at different concentrations has indicated that a bis(mu-oxo)dicopper(III) complex is the precursor for the formation of trinuclear copper complex. In the reaction with 2,4-di-tert-butylphenol (DBP), the trinuclear copper(II, II, III) complex acts as a two-electron oxidant to produce an equimolar amount of the C[bond]C coupling dimer of DBP (3,5,3',5'-tetra-tert-butyl-biphenyl-2,2'-diol) and a bis(mu-hydroxo)dicopper(II) complex. Kinetic analysis has shown that the reaction consists of two distinct steps, where the first step involves a binding of DBP to the trinuclear complex to give a certain intermediate that further reacts with the second molecule of DBP to give another intermediate, from which the final products are released. Steric and/or electronic effects of the 6-methyl group and the N-alkyl substituents of the bidentate ligands on the copper(I)-dioxygen reactivity have been discussed.     

Substituent effects of beta-diketiminate ligands on the structure and physicochemical properties of copper(II) complexes

Substituent effects of beta-diketiminate ligands on the structure and physicochemical properties of the copper(II) complexes have been systematically investigated by using 3-iminopropenylamine derivatives R1LR3H, R3-N=CH-C(R1)=CH-NH-R3, where R1 is Me, H, CN, or NO2, and R3 is Ph, Mes (mesityl), Dep (2,6-diethylphenyl), Dipp (2,6-diisopropylphenyl), or Dtbp (3,5-di-tert-butylphenyl). When the ligands with R3=Ph or Dtbp were treated with CuII(OAc)2, bis(beta-diketiminate) copper(II) complexes exhibiting distorted tetrahedral geometries were obtained, the crystal structures of which were nearly the same as each other regardless of the alpha-substituent (R1); dihedral angles between the two beta-diketiminate coordination planes are 62.5 +/- 1.2 degrees, and the Cu-N bond lengths are 1.959 +/- 0.008 A. The distorted tetrahedral structures are maintained in solution, but the spectroscopic features, especially gII values of the ESR spectra and the d-d bands of the absorption spectra, as well as the electrochemical behaviors of the complexes, are significantly affected by the electronic nature of R1. The ligands with R3=Mes and Dep, on the other hand, gave di(mu-hydroxo)dicopper(II) complexes, and their crystal structures as well as spectroscopic and electrochemical features have also been explored. Furthermore, the ligand with the more sterically encumbered aromatic substituent (Dipp) provided a mononuclear four-coordinate square planar copper(II) complex supported by one beta-diketiminate ligand and one didentate acetate ion. Thus, the beta-diketiminate ligands with a variety of substituents (R1 and R3) have been explored to provide coordinatively unsaturated (four-coordinate) mononuclear and dinuclear copper(II) complexes with significantly different coordination geometry and properties.     

Copper(I)/S(8) reversible reactions leading to an end-on bound dicopper(II) disulfide complex: nucleophilic reactivity and analogies to copper-dioxygen chemistry

Elemental sulfur (S8) reacts reversibly with the copper(I) complex [(TMPA')CuI](+) (1), where TMPA' is a TMPA (tris(2-pyridylmethyl)amine) analogue with a 6-CH2OCH3 substituent on one pyridyl ligand arm, affording a spectroscopically pure end-on bound disulfido-dicopper(II) complex [{(TMPA')Cu(II)}2(mu-1,2-S2(2-))](2+) (2) {nu(S-S) = 492 cm(-1); nu(Cu-S)sym = 309 cm(-1)}; by contrast, [(TMPA)Cu(I)(CH3CN)](+) (3)/S8 chemistry produces an equilibrium mixture of at least three complexes. The reaction of excess PPh3 with 2 leads to formal "release" of zerovalent sulfur and reduction of copper ion to give the corresponding complex [(TMPA')Cu(I)(PPh3)](+) (11) along with S=PPh3 as products. Dioxygen displaces the disulfur moiety from 2 to produce the end-on Cu2O2 complex, [{(TMPA')Cu(II)}2(mu-1,2-O2(2-)](2+) (9). Addition of the tetradentate ligand TMPA to 2 generates the apparently more thermodynamically stable [{(TMPA)Cu(II)}2(mu-1,2-S2(2-))](2+) (4) and expected mixture of other species. Bubbling 2 with CO leads to the formation of the carbonyl adduct [(TMPA')CuI(CO)](+) (8). Carbonylation/sulfur-release/CO-removal cycles can be repeated several times. Sulfur atom transfer from 2 also occurs in a near quantitative manner when it is treated with 2,6-dimethylphenyl isocyanide (ArNC), leading to the corresponding isothiocyanate (ArNCS) and [(TMPA')Cu(I)(CNAr)](+) (12). Complex 2 readily reacts with PhCH2Br: [{(TMPA')Cu(II)}2(mu-1,2-S(2)(2-)](2+) (2) + 2 PhCH2Br --> [{(TMPA')Cu(II)(Br)}2](2+) (6) + PhCH2SSCH2Ph. The unprecedented substrate reactivity studies reveal that end-on bound mu-1,2-disulfide-dicopper(II) complex 2 provides a nucleophilic S2(2-) moiety, in striking contrast to the electrophilic behavior of a recently described side-on bound mu-eta(2):eta(2)-disulfido-dicopper(II) complex, [{(N3)Cu(II)}(2)(mu-eta(2):eta(2)-S2(2-))](2+) (5) with tridentate N3 ligand. The investigation thus reveals striking analogies of copper/sulfur and copper/dioxygen chemistries, with regard to structure type formation and specific substrate reactivity patterns.     

Can an ancillary ligand lead to a thermodynamically stable end-on 1 : 1 Cu-O2 adduct supported by a beta-diketiminate ligand?

The finding that dioxygen binds end-on to the Cu(B) site in the crystal structure of a precatalytic complex of peptidylglycine alpha-hydroxylating monooxygenase has spurred the search for biomimetic model complexes exhibiting the same dioxygen coordination. Recent work has not only indicated that sterically hindered beta-diketiminate ligands (L(1)) could support side-on 1 : 1 Cu-O(2) adducts, but also that an end-on L(1)Cu(THF)O(2) structure occurs as an unstable intermediate in the oxygenation mechanism of the Cu(I) complex. In this work, density functional theory and multireference methods are used to determine the potential of ancillary ligands, X, other than THF to yield thermodynamically stable end-on L(1)CuXO(2) species. A diverse set of ligands X, comprising phosphines, thiophene, cyclic ethers, acetonitrile, para-substituted pyridines, N-heterocyclic carbenes, and ligands bearing hydrogen bond donors, has been considered in order to identify ligand characteristics which energetically favor end-on L(1)CuXO(2) over: a) reversion to the Cu(I) complex and dioxygen, b) isomerization to side-on L(1)CuXO(2), and c) decay to L(1)CuO(2) and X. Ancillary ligands with judiciously chosen degrees and orientation of steric bulk and which bear potential hydrogen bond donors to an end-on bound dioxygen moiety most favor oxygenation of L(1)CuX to yield end-on L(1)CuXO(2). Conversion to the side-on isomer can be deterred through the use of a sufficiently bulky ligand X, such as one that is at least the size of a 5-membered ring. Loss of X to give L(1)CuO(2) can be made prohibitively endergonic by employing ligands X which are highly electron donating and which backbond strongly with and sigma-donate significantly to copper.     

Reversible O-O bond cleavage in copper-dioxygen isomers: impact of anion basicity

Low-temperature oxygenation of copper(I) complexes of N,N,N',N'-tetraethylpropane-1,3-diamine yields solutions containing both mu-eta2:eta2-peroxodicopper(II) (P) and bis(mu-oxo)dicopper(III) (O) valence isomers. The P/O equilibrium position depends on the nature of the counteranion; P is favored with more basic anions. Titration and EXAFS experiments as well as DFT calculations suggest that axial donation from a sulfonate anion to the copper centers imparts an electronic/electrostatic bias toward the P isomer.     

New mode of coordination for the dinitrogen ligand: formation, bonding, and reactivity of a tantalum complex with a bridging N(2) unit that is both side-on and end-on.

The reaction of a mixture of 1 equiv of PhPH(2) and 2 equiv of PhNHSiMe(2)CH(2)Cl with 4 equiv of Bu(n)Li followed by the addition of THF generates the lithiated ligand precursor [NPN]Li(2).(THF)(2) (where [NPN] = PhP(CH(2)SiMe(2)NPh)(2)). The reaction of [NPN]Li(2).(THF)(2) with TaMe(3)Cl(2) produces [NPN]TaMe(3), which reacts under H(2) to yield the diamagnetic dinuclear Ta(IV) tetrahydride ([NPN]Ta)(2)(mu-H)(4). This hydride reacts with N(2) with the loss of H(2) to produce ([NPN]Ta(mu-H))(2)(mu-eta(1):eta(2)-N(2)), which was characterized both in solution and in the solid state, and contains strongly activated N(2) bound in the unprecedented side-on end-on dinuclear bonding mode. A density functional theory calculation on the model complex [(H(3)P)(H(2)N)(2)Ta(mu-H)](2)(mu-eta(1):eta(2)-N(2)) provides insight into the molecular orbital interactions involved in the side-on end-on bonding mode of dinitrogen. The reaction of ([NPN]Ta(mu-H))(2)(mu-eta(1):eta(2)-N(2)) with propene generates the end-on bound dinitrogen complex ([NPN]Ta(CH(2)CH(2)CH(3)))(2)(mu-eta(1):eta(1)-N(2)), and the reaction of [NPN]Li(2).(THF)(2) with NbCl(3)(DME) generates the end-on bound dinitrogen complex ([NPN]NbCl)(2)(mu-eta(1):eta(1)-N(2)). These two end-on bound dinitrogen complexes provide evidence that the bridging hydride ligands are responsible for the unusual bonding mode of dinitrogen in ([NPN]Ta(mu-H))(2)(mu-eta(1):eta(2)-N(2)). The dinitrogen moiety in the side-on end-on mode is amenable to functionalization; the reaction of ([NPN]Ta(mu-H))(2)(mu-eta(1):eta(2)-N(2)) with PhCH(2)Br results in C-N bond formation to yield [NPN]Ta(mu-eta(1):eta(2)-N(2)CH(2)Ph)(mu-H)(2)TaBr[NPN]. Nitrogen-15 NMR spectral data are provided for all the tantalum-dinitrogen complexes and derivatives described.     

Dicopper-dioxygen complex supported by asymmetric pentapyridine dinucleating ligand

A dicopper(I) complex supported by a novel asymmetric pentapyridine dinucleating ligand, consisting of tetradentate and tridentate metal-binding sites, has been synthesized and characterized. The dicopper(I) complex reacted with molecular oxygen at a low temperature to give an unprecedented mu-peroxo dicopper(II) complex presumably having a mu-eta1:eta2 binding mode, the spectroscopic features and the reactivity of which have been explored in detail.     

Tridentate copper ligand influences on heme-peroxo-copper formation and properties: reduced, superoxo, and mu-peroxo iron/copper complexes

In cytochrome c oxidase synthetic modeling studies, we recently reported a new mu-eta2:eta2-peroxo binding mode in the heteronuclear heme/copper complex [(2L)Fe(III)-(O2(2-))-CuII]+ (6) which is effected by tridentate copper chelation (J. Am. Chem. Soc. 2004, 126, 12716). To establish fundamental coordination and O2-reactivity chemistry, we have studied and describe here (i) the structure and dioxygen reactivity of the copper-free compound (2L)FeII (1), (ii) detailed spectroscopic properties of 6 in comparisons with those of known mu-eta2:eta1 heme-peroxo-copper complexes, (iii) formation of 6 from the reactions of [(2L)FeIICuI]+ (3) and dioxygen by stopped-flow kinetics, and (iv) reactivities of 6 with CO and PPh3. In the absence of copper, 1 serves as a myoglobin model compound possessing a pyridine-bound five-coordinate iron(II)-porphyrinate which undergoes reversible dioxygen binding. Oxygenation of 3 below -60 degrees C generates the heme-peroxo-copper complex 6 with strong antiferromagnetic coupling between high-spin iron(III) and copper(II) to yield an S = 2 spin system. Stopped-flow kinetics in CH2Cl2/6% EtCN show that dioxygen reacts with iron(II) first to form a heme-superoxide moiety, [(EtCN)(2L)FeIII-(O2-)...CuI(EtCN)]+ (5), which further reacts with Cu(I) to generate 6. Compared to those properties of a known mu-eta2:eta1-heme-peroxo-copper complex, 6 has a significantly diminished resonance Raman nu(O-O) stretching frequency at 747 cm(-1) and distinctive visible absorptions at 485, 541, and 572 nm, all of which seem to be characteristics of a mu-eta2:eta2-heme-peroxo-copper system. Addition of CO or PPh3 to 6 yields a bis-CO adduct of 3 or a PPh(3) adduct of 5, the latter with a remaining FeIII-(O2-) moiety.     

Structures and redox reactivities of copper complexes of (2-pyridyl)alkylamine ligands. Effects of the alkyl linker chain length

Ligand effects on the structures and redox reactivities of copper complexes have been examined using (2-pyridyl)alkylamine derivatives as the supporting ligands, where particular attention has been focused on the effects of the alkyl linker chain length connecting the tertiary amine nitrogen atom and the pyridine nucleus: N[bond]CH(2)[bond]Py (Pym) vs N[bond]CH(2)CH(2)[bond]Py (Pye). X-ray crystallographic analysis of the copper(I) complex of tridentate ligand (Phe)L(Pym2) [N,N-di(2-pyridylmethyl)-2-phenylethylamine] (complex 1) has demonstrated that it possesses a trigonal pyramidal geometry in which a d[bond]pi interaction with an eta(1)-binding mode exists between the metal ion and one of the ortho carbons of the phenyl ring of the ligand side arm (phenethyl). The result shows sharp contrast to the d[bond]pi interaction with an eta(2)-binding mode existing in the copper(I) complex of (Phe)L(Pye2) [N,N-di[2-(2-pyridyl)ethyl]-2-phenethylamine] (complex 2). Such a d-pi interaction has been shown to affect the stability of the copper(I) complex in CH(2)Cl(2). Oxygenation of copper(I) complex 1 supported by (Phe)L(Pym2) produces a bis(mu-oxo)dicopper(III) complex, also being in sharp contrast to the case of the copper(I) complex 2 with ligand (Phe)L(Pye2), which preferentially affords a (micro-eta(2):eta(2)-peroxo)dicopper(II) complex in the reaction with O(2). Such an effect of the alkyl linker chain length of the metal binding site has also been found to operate in the RSSR (disulfide)/2RS(-) (thiolate) redox system. Namely, ligand (S2,R)L(Pym1) (di[2-[(alkyl)(2-pyridinylmethyl)amino]ethyl] disulfide) with the methylene linker group (Pym) induced the reductive disulfide bond cleavage in the reaction with copper(I) ion to give a bis(micro-thiolato)dicopper(II) complex, while the ligand with the ethylene linker group (Pye), (S2,Bn)L(Pye1) (di[2-[(benzyl)(2-(2-pyridinyl)ethyl)amino]ethyl] disulfide), gave a disulfide-dicopper(I) complex. These ligand effects in the Cu(2)[bond]O(2) and Cu(2)[bond]S(2) systems have been discussed by taking into account the difference in electron-donor ability of the pyridine nucleus between the Pym and Pye ligand systems.     

beta-diketiminate ligand backbone structural effects on Cu(I)/O(2) reactivity: unique copper-superoxo and bis(mu-oxo) complexes

Copper(I) and -(II) complexes of beta-diketiminate ligands with identical flanking 2,6-diisopropylphenyl groups but divergent backbone substitution patterns were prepared and structurally characterized, and reactions of the Cu(I) species with O(2) at low temperature were explored. Despite being far removed from the coordinated metal ion, the different backbone patterns significantly influence the steric encumbrance exerted by the ligands, as revealed by differences in (a) the structural features of the Cu(I) and Cu(II) complexes and (b) the course of the oxygenation reactions of the Cu(I) compounds. With the less hindered ligand, a rare example of a neutral bis(mu-oxo)dicopper complex was identified on the basis of its diagnostic spectral features (UV-vis, resonance Raman, EPR) and the stoichiometry of O(2) uptake (Cu:O(2) = 2:1). In contrast, oxygenation of the Cu(I) complexes supported by the more hindered ligands yielded novel (superoxo)copper complexes, identified by a Cu:O(2) ratio of 1:1, a lack of an EPR signal, and O-isotope sensitive resonance Raman spectral features (nu(O)(-)(O) = 968 cm(-1), Delta(18)O(2) = 51 cm(-1)). Symmetric coordination of the superoxo ligand is proposed on the basis of Raman data acquired using (16)O(18)O (single peak at 943 cm(-1)).     

Copper chemistry of beta-diketiminate ligands: monomer/dimer equilibria and a new class of bis(mu-oxo)dicopper compounds

A series of Cu(I) and Cu(II) complexes of a variety of beta-diketiminate ligands (L(-)) with a range of substitution patterns were prepared and characterized by spectroscopic, electrochemical, and, in several cases, X-ray crystallographic methods. Specifically, complexes of the general formula [LCuCl](2) were structurally characterized and their magnetic properties assessed through EPR spectroscopy of solutions and, in one instance, by variable-temperature SQUID magnetization measurements on a powder sample. UV-vis spectra indicated reversible dissociation to 3-coordinate monomers LCuCl in solution at temperatures above -55 degrees C. The Cu(I) complexes LCu(MeCN) exhibited reversible Cu(I)/Cu(II) redox couples with E(1/2) values between +300 and +520 mV versus NHE (cyclic voltammetry, MeCN solutions). These complexes were highly reactive with O(2), yielding intermediates that were identified as rare examples of neutral bis(mu-oxo)dicopper complexes on the basis of their EPR silence, diagnostic UV-vis absorption data, and O-isotope-sensitive resonance Raman spectroscopic features. The structural features of the compounds [LCuCl](2) and LCu(MeCN) as well as the proclivity to form bis(mu-oxo)dicopper products upon oxygenation of the Cu(I) complexes are compared to data previously reported for complexes of more sterically hindered beta-diketiminate ligands (Aboelella, N. W.; Lewis, E. A.; Reynolds, A. M.; Brennessel, W. W.; Cramer, C. J.; Tolman, W. B. J. Am. Chem. Soc. 2002, 124, 10600. Spencer, D. J. E.; Aboelella, N. W.; Reynolds, A. M.; Holland, P. L.; Tolman, W. B. J. Am. Chem. Soc. 2002, 124, 2108. Holland, P. L.; Tolman, W. B. J. Am. Chem. Soc. 1999, 121, 7270). The observed structural and reactivity differences are rationalized by considering the steric influences of both the substituents on the flanking aromatic rings and those present on the beta-diketiminate backbone.     

Copper-dioxygen adducts and the side-on peroxo dicopper(II)/bis(mu-oxo) dicopper(III) equilibrium: Significant ligand electronic effects

The variation of ligand para substituents on pyridyl donor groups of tridentate amine copper(I) complexes was carried out in order to probe electronic effects on the equilibrium between mu-eta2:eta2-(side-on)-peroxo [Cu(II)2(O2(2-))]2+ and bis(mu-oxo) [Cu(III)2(O(2-))2] species formed upon reaction with O2. [Cu(I)(R-PYAN)(MeCN)n]B(C6F5)4 (R-PYAN = N-[2-(4-R-pyridin-2-yl)-ethyl]-N,N',N'-trimethyl-propane-1,3-diamine, R = NMe2, OMe, H, and Cl) (1R) vary over a narrow range in their Cu(II)/Cu(I) redox potentials (E(1/2) vs Fe(cp)2(+/0) = -0.40 V for 1(NMe2), -0.38 V for 1(OMe), -0.33 V for 1H, and -0.32 V for 1Cl) and in C-O stretching frequencies of their carbonyl adducts, 1R-CO: nu(C-O) = 2080, 2086, 2088, and 2090 cm(-1) for R = NMe2, OMe, H, and Cl, respectively. However, within this range of electronic properties for 1R, dioxygen reactivity is significantly affected. The reaction of 1Cl or 1H with O2 at -78 degrees C in CH2Cl2 gives UV-vis and resonance Raman spectra indicative of a mu-eta2:eta2-(side-on)-peroxo dicopper(II) adduct (2R). Compound 1(OMe) reacts with O2, yielding equilibrium mixtures of side-on peroxo (2(OMe)) and bis(mu-oxo) (3(OMe)) species. Oxygenation of 1(NMe2) leads to the sole generation of the bis(mu-oxo) dicopper(III) complex (3(NMe2)). A solvent effect was also observed; in acetone or THF, increased ratios of bis(mu-oxo) relative to side-on peroxo complex are observed. Thus, the equilibrium between a dicopper side-on peroxo and bis(mu-oxo) species can be tuned by ligand design-specifically, more electron donating ligands favor the formation of the latter isomer, and the peroxo/bis(mu-oxo) equilibrium can be shifted from one extreme to the other within the same ligand system. Observations concerning the reactivity of the dioxygen adducts 2H and 3(NMe2) toward external substrates are also presented.     

Theoretical characterization of end-on and side-on peroxide coordination in ligated Cu2O2 models

The relative energetics of mu-eta1:eta1 (trans end-on) and mu-eta2:eta2 (side-on) peroxo isomers of Cu2O2 fragments supported by 0, 2, 4, and 6 ammonia ligands have been computed with various density functional, coupled-cluster, and multiconfigurational protocols. There is substantial disagreement between the different levels for most cases, although completely renormalized coupled-cluster methods appear to offer the most reliable predictions. The significant biradical character of the end-on peroxo isomer proves problematic for the density functionals, while the demands on active space size and the need to account for interactions between different states in second-order perturbation theory prove challenging for the multireference treatments. In the latter case, it proved impossible to achieve any convincing convergence.     

mu-eta2:eta2-peroxodicopper(II) complex with a secondary diamine ligand: a functional model of tyrosinase

The activation of dioxygen (O(2)) by Cu(I) complexes is an important process in biological systems and industrial applications. In tyrosinase, a binuclear copper enzyme, a mu-eta(2):eta(2)-peroxodicopper(II) species is accepted generally to be the active oxidant. Reported here is the characterization and reactivity of a mu-eta(2):eta(2)-peroxodicopper(II) complex synthesized by reacting the Cu(I) complex of the secondary diamine ligand N,N'-di-tert-butyl-ethylenediamine (DBED), [(DBED)Cu(MeCN)](X) (1.X, X = CF(3)SO(3)(-), CH(3)SO(3)(-), SbF(6)(-), BF(4)(-)), with O(2) at 193 K to give [[Cu(DBED)](2)(O(2))](X)(2) (2.X(2)). The UV-vis and resonance Raman spectroscopic features of 2 vary with the counteranion employed yet are invariant with change of solvent. These results implicate an intimate interaction of the counteranions with the Cu(2)O(2) core. Such interactions are supported further by extended X-ray absorption fine structure (EXAFS) analyses of solutions that reveal weak copper-counteranion interactions. The accessibility of the Cu(2)O(2) core to exogenous ligands such as these counteranions is manifest further in the reactivity of 2 with externally added substrates. Most notable is the hydroxylation reactivity with phenolates to give catechol and quinone products. Thus the strategy of using simple bidentate ligands at low temperatures provides not only spectroscopic models of tyrosinase but also functional models.     

eta1:eta2-Alkynyl-bridged W-Si complexes: formation, structure, and reaction with acetone

Reactions of (eta5-C5Me4R)(CO)2(MeCN)WMe (R = Me, Et) with HPh2SiCCtBu gave the novel alkynyl-bridged W-Si complexes, (eta5-C5Me4R)(CO)2W(mu-eta1:eta2-CCtBu)(SiPh2) (R = Me, Et), whose alkynyl ligands bridge the tungsten and silicon atoms in an eta1:eta2-coordination mode. The structures of these complexes were fully characterized, including X-ray crystallography. Treatment of (eta5-C5Me5)(CO)2W(mu-eta1:eta2-CCtBu)(SiPh2) with acetone resulted in acetone insertion into the silicon-alkynyl linkage followed by intramolecular C-H activation of the tBu group to give the chelate-type alkyl-alkene complex, (eta5-C5Me5)(CO)2W(eta1:eta2-CH2CMe2C=CHSiPh2OCMe2).     

Pyridazine-bridged copper(I) complexes of bis-bidentate ligands: tetranuclear [2 x 2] grid versus dinuclear side-by-side architectures as a function of ligand substituents

Eight bis-bidentate Schiff-base ligands, derived from 3,6-diformylpyridazine and substituted amino-benzenes, have been prepared. A variety of electron donating/withdrawing and/or sterically demanding/undemanding substituents were employed. Two ligands and five of the six pure copper(I) complexes have been structurally characterised. The sterically unhindered ligand derived from 3,5-difluoroaniline, (m,m-F), was almost completely flat whereas the very sterically hindered ligand derived from trimethylaniline, (o,o,p-Me), was severely twisted. The only dinuclear side-by-side complex obtained, [Cu(I)(2)((o-Ph))(2)](PF(6))(2), was of the ligand derived from 2-aminobiphenyl. All five of the other complexes are believed to be [2 x 2] tetranuclear grid complexes, and this was unequivocally shown to be the case for four of these complexes, [Cu(I)(4)((p-Me))(4)](PF(6))(4), [Cu(I)(4)((o,p-Me))(4)](PF(6))(4), [Cu(I)(4)((m,m-F))(4)](PF(6))(4) and [Cu(I)(4)((m,m-Cl))(4)](PF(6))(4). In all cases the copper(I) centres are substantially distorted from tetrahedral, with the most severe distortion present in the side-by-side complex. In the absence of any special effects, tetracopper(I) [2 x 2] grid architectures are observed to be the favored outcome for 1 : 1 reactions of these bis-bidentate ligands with copper(I) ions. Only when the aromaticity of the ligand was extended by employing a phenyl substituent on the phenyl rings, (o-Ph), did a dicopper(I) side-by-side architecture result. Cyclic voltammetry in acetone revealed that the free ligands did not undergo reduction until potentials below -0.8 V, whereas between three and four reversible one electron reductions were observed, between +0.16 and -0.71 vs. AgCl/Ag, for the tetranuclear copper(I) [2 x 2] grid complexes. The redox potentials observed for these complexes are highly dependent on the nature of the ligand phenyl ring substituent(s). The side-by-side complex had one irreversible reduction process, E(pc)ca.-0.5 V.     

Conversion of methane to methanol at the mononuclear and dinuclear copper sites of particulate methane monooxygenase (pMMO): a DFT and QM/MM study

Methane hydroxylation at the mononuclear and dinuclear copper sites of pMMO is discussed using quantum mechanical and QM/MM calculations. Possible mechanisms are proposed with respect to the formation of reactive copper-oxo and how they activate methane. Dioxygen is incorporated into the Cu(I) species to give a Cu(II)-superoxo species, followed by an H-atom transfer from a tyrosine residue near the monocopper active site. A resultant Cu(II)-hydroperoxo species is next transformed into a Cu(III)-oxo species and a water molecule by the abstraction of an H-atom from another tyrosine residue. This process is accessible in energy under physiological conditions. Dioxygen is also incorporated into the dicopper site to form a (mu-eta(2):eta(2)-peroxo)dicopper species, which is then transformed into a bis(mu-oxo)dicopper species. The formation of this species is more favorable in energy than that of the monocopper-oxo species. The reactivity of the Cu(III)-oxo species is sufficient for the conversion of methane to methanol if it is formed in the protein environment. Since the sigma orbital localized in the Cu-O bond region is singly occupied in the triplet state, this orbital plays a role in the homolytic cleavage of a C-H bond of methane. The reactivity of the bis(mu-oxo)dicopper species is also sufficient for the conversion of methane to methanol. The mixed-valent bis(mu-oxo)Cu(II)Cu(III) species is reactive to methane because the amplitude of the sigma singly occupied MO localized on the bridging oxo moieties plays an essential role in C-H activation.