Surface activation of air oxidation of hydrazine on kaolinite. 2. Consideration of oxidizing/reducing entities in relationship to other compositional, structural, and energetic factors

The rates (previously reported) for the air oxidation of hydrazine on kaolinite and substituent oxides of kaolinite showed a complex dependence on the relative amounts of several structural oxidizing/reducing entities within the reaction-promoting solids. The rates indicated an important role of the clay but no dominant role of any one of the oxidizing/reducing entities. In this paper we review (a) the reaction-promoting activity of these centers as studied in other systems, (b) various spectroscopic results showing interaction between these entities in clays, and (c) reported spectroscopic studies of the complexation between hydrazine and aluminosilicate surfaces as a whole, in an effort to propose a mechanism for the reaction. Whereas some uncertainties remain, the present synthesis concludes that a mechanism operating through single electron/hole transfers and hydrogen atom transfers by discrete centers is adequate to explain the observed rate behaviors including the observed second order dependence of the oxidation rate on catalyst amount. The effects of these operations on the catalyst can result in no alteration of, or complete or partial electronic relaxation of its contingent of trapped separated charge pairs. The degree to which surface complexation as a whole, intercalation, or luminescent processes may also be associated with the reaction cannot be adequately assessed with the information in hand.     

Thermal Behaviour of Kaolinite Intercalated with Formamide, Dimethyl Sulphoxide and Hydrazine

The thermal behaviour of kaolinites intercalated with formamide, dimethyl sulphoxide and hydrazine has been studied by simultaneous TG-DTG-DTA-EGA and TG-MS techniques. The complexes can be decomposed completely without dehydroxylating the mineral. It was found that the amount of intercalated guest molecules per inner surface OH-group is close to unity for the formamide and dimethyl sulphoxide intercalates. For the intercalation of hydrazine it was found that hydrazine is locked in the expanded mineral as hydrazine hydrate and its amount is somewhat higher than that obtained for the other two reagents. The thermal evolution patterns of the guest molecules revealed that all the three reagents are bonded at least in two different ways in the interlayer space. This revised version was published online in August 2006 with corrections to the Cover Date.     

A Thermodynamic Study of Interactions of Monoionic Kaolinite with N,N-Dimethylacetamide (DMA) and Pyridine (PY)

Two series of monoionic (M) kaolinites (M = H(+), Ca(2+), Cu(2+), Zn(2+), Al(3+), and Fe(3+)) were prepared from a natural Brazilian clay (S?o Sim?o clay, SP): series A, dried under vacuum at 25 degrees C, and series B, dried under vacuum at 25 degrees C. The natural clay was characterized by elemental analysis, cation exchange capacity, X-ray diffractometry, differential thermal analysis, and surface area measurements (BET). The interactions of M,M-dimethylacetamide and pyridine with these (M) kaolinites were studied by adsorption isotherms, titration calorimetry, and infrared spectroscopy (for pyridine only). The results indicated a coordinative interaction between M,M-dimethylacetamide and (M) kaolinites. For the interactions between pyridine and (M) kaolinites, the formation of hydrogen bonds (M = Al(3+), Fe(3+)), hydrogen and coordinative bonds (M = Cu(2+), Zn(2+)), and ionic pairs (M = H(+), Ca(2+)) was observed. For the pyridine-(Cu) kaolinite system, a substitution of water coordinated to Cu(2+) by pyridine was established.     

Kinetics and mechanisms of Zn complexation on metal oxides using EXAFS spectroscopy

Zn(II) sorption onto Al and Si oxides was studied as a function of pH (5.1-7.52), sorption density, and ionic strength. This study was carried out to determine the role of the various reaction conditions and sorbent phases in Zn complexation at oxide surfaces. Extended X-ray absorption fine structure (EXAFS) spectroscopy was used to probe the Zn atomic environment at the metal oxide/aqueous interface. For both amorphous silica and high-surface-area gibbsite, Zn sorption kinetics were rapid and reached completion within 24 h. In contrast, Zn sorption on low-surface-area-gibbsite was much slower, taking nearly 800 h for a sorption plateau to be reached. In the case of silica, EXAFS revealed that Zn was in octahedral coordination with first-shell oxygen atoms up to a surface loading of approximately 1 micro molm(-2), changing to tetrahedral coordination as surface loading and pH increased. For the high-surface-area gibbsite system, the Znz.sbnd;O first-shell distance was intermediate between values for tetrahedral and octahedral coordination over all loading levels. Zn formed inner-sphere adsorption complexes on both silica and high-surface-area gibbsite over all reaction conditions. For Zn sorption on low-surface-area gibbsite, formation of Znz.sbnd;Al layered double hydroxide (LDH) occurred and was the cause for the observed slow Zn sorption kinetics. The highest pH sample (7.51) in the Zn-amorphous silica system resulted in the formation of an amorphous Zn(OH)(2) precipitate with tetrahedral coordination between Zn and O. Aging the reaction samples did not alter the Zn complex in any of the systems. The results of this study indicate the variability of Zn complexation at surfaces prevalent in soil and aquatic systems and the importance of combining macroscopic observations with methods capable of determining metal complex formation mechanisms.     

Comparative Baeyer-Villiger oxidation of cyclohexanone on Fe-pillared clays and iron tetrasulfophthalocyanine covalently supported on silica

The Baeyer-Villiger oxidation of cyclohexanone to caprolactone has been investigated at room temperature over AlFe-pillared clays, using oxygen as oxidant in the presence of benzaldehyde. A nearly complete conversion is observed with a selectivity into caprolactone above 80%. The observation of an induction period in the kinetics, of high activity of the non-pillared clay, and the detection of Fe traces in the reaction medium, suggest a process involving homogenous catalysis. The reaction is indeed catalysed in homogeneous phase by a few ppm of Fe. By contrast, iron phthalocyanine covalently supported on silica appears as a true heterogeneous catalyst, giving a selectivity above 95% to caprolactone at 61% conversion.     

Determination of structural modification in acid activated montmorillonite clay by FT-IR spectroscopy

The structural modifications and the Bronsted acid sites generated during the acid treatment of montmorillonite clay with varied concentration of sulphuric acid was determined using FT-IR spectroscopy. Octahedral sheet is affected at low acid concentration resulting into the dissolution of cations; among them Mg2+ cations are prone to dissolve than Fe2+/3+ and Al3+. Tetrahedral sheet is affected at higher acid concentration. The partial substitution of octahedral Al3+ by Mg2+ or Fe2+/3+ cations and the presence of other non-smectite minerals such as kaolinites was also been clearly identified, thus making FT-IR spectroscopy as a rapid technique for monitoring the structural features of montmorillonite clay.     

Effect of Phosphate on the Adsorption of Glyphosate on Soils,Clay Minerals and Oxides

The effect of phosphate (ortho-phosphate) on the adsorption of the widely used glyphosate herbicide was evaluated with three typical Danish agricultural soils as well as pure oxides (goethite, FeOOH and gibbsite, Al(OH) 3 ) and silicates (illite and montmorillonite), which are considered the most important glyphosate and phosphate adsorbents in soils. Batch experiments where made in order to find out how phosphate affects adsorption of glyphosate and how glyphosate affects adsorbed phosphate. Solution glyphosate was quantified by liquid scintillation counting of 14 C-taggered herbicide and the concentration of phosphate by the molybdenum blue method. All experiments showed competition between phosphate and glyphosate for adsorption sites but the various adsorbents exhibited great variation in affinity for glyphosate and phosphate. Thus, gibbsite and, in particular goethite strongly prefer phosphate, whereas the competition on the silicates is more equal. The current studies showed that the competition in soils is almost equal, but still phosphate affects the sorption of glyphosate in soil. The amount of glyphosate and phosphate adsorbed by the various kinds of adsorbents was found to decrease in the order: oxides > silicates > soils. For the soils tested aluminium oxides, and to a lesser extent iron oxides seem the most important components in determining a soil's ability to adsorb phosphate and glyphosate, whereas the clay content and clay type seem of minor or little importance for adsorption of these species.     

酸处理活性炭催化水合肼还原硝基苯(英文)

以水合肼为还原剂,采用硝酸、盐酸、硫酸及氮气或氢气氛处理的活性炭为催化剂,考察了其催化硝基苯还原反应性能.结果表明,经化学处理后,活性炭表面形成了各种含氧官能团,它们可引发水合肼分解,并影响硝基苯的吸附.活性炭表面形成的含氧官能团越多,其催化硝基苯还原速率越快.其中经盐酸处理的活性炭表面形成的含氧官能团最多,因而表现出最高的硝基苯还原活性.     

Kinetics of the Formation and Dissolution of Ni Precipitates in a Gibbsite/Amorphous Silica Mixture

There have been a number of studies that have examined metal precipitation reactions on an array of natural soil materials. While many of these investigations have focused on model single-component systems, recent research has appeared on metal precipitation on soils and clay fractions of soils. However, few studies have explored mixed model component systems, which may lead to a better understanding of metal reactions on soils and clay fractions. Furthermore, only a few studies have appeared on the stability of the metal surface precipitates. In light of this, we investigated Ni sorption and dissolution kinetics and mechanisms on a mixture of gibbsite and amorphous silica by combining macroscopic studies with X-ray absorption fine structure (XAFS) and diffuse reflectance spectroscopies (DRS), and high-resolution thermogravimetric analysis (HRTGA). Batch sorption experiments were conducted at pH 7.5 and at different reaction times to elucidate the sorption process and to study the role of residence time on metal precipitate stability. Spectroscopic and HRTGA investigations revealed alpha-Ni(OH)(2) precipitates formed on the gibbsite/silica mixture initially and over time evolved to a Ni phyllosilicate. The available Si source was derived from partial dissolution of the sorbent during Ni sorption. With increasing residence time, the precipitate phases drastically increased in stability, as shown by decreasing amounts of Ni release as effected by nitric acid (HNO(3)) and ethylenediaminetetraacetic acid (EDTA) treatments. This aging effect may be explained by the silicate-for-nitrate exchange during the first days of reaction and subsequently by silicate polymerization and partial grafting onto the hydroxide layers to form a phyllosilicate precursor phase (R. G. Ford, A. C. Scheinost, K. G. Scheckel, and D. L. Sparks, Environ. Sci. Technol. 33(18), 3140-3144, 1999). Copyright 2000 Academic Press.     

SENSITIZED PHOTOOXYGENATION ACCORDING TO TYPE I MECHANISM (RADICAL MECHANISM) - PART I. FLASH PHOTOLYSIS EXPERIMENTS

Abstract— The photooxygenation of allylthiourea (ATU) sensitized by thionine does not occur according to the singlet oxygen mechanism but rather proceeds via the formation of radicals. In oxygen-free solution the primary process is a redox reaction between the thionine triplet and ATU where a semithionine- and an ATU-radical are formed. In further reaction steps the leuco form of the dye is finally produced (reductive photobleaching; D
R mechanism after Koizumi). The primary process in an oxygen-containing aqueous solution is the same, since at high concentrations of ATU (0·2 M ) the amount of semithionine formed by a photolytic flash, as well as the time course of disappearance of semithionine, does not depend on the oxygen content of the solution.
The reformation of thionine following flash photolysis has been investigated with regard to oxygen concentration and pH dependence. Two different excitation intensities were used. A quadratic dependence of thionine reformation on excitation intensity at high oxygen concentration was observed, indicating a reaction between two photoproducts.
The dependence of the reaction rate of semithionine on the ionic strength has been investigated. These experiments show that the reaction partner of semithionine carries a charge of + 1 in oxygen-free as well as in oxygen-saturated solution.     

苯并噻唑和铁氧化物纳米粒子修饰的磁性棒碳糊电极上肼的电催化氧化反应：同时检测肼和苯酚

开发了一种磁性Fe3O4纳米粒子和2-(3,4-二羟苯基)苯并噻唑(DPB)修饰的磁性棒碳糊电极(MBCPE)用于电化学检测肼.首先将DPB自组装在Fe3O4纳米粒子上,然后将此复合物吸附于设计的MBCPE上. MBCPE电极将磁性纳米粒子吸引到电极表面.所得新型电极具有高的导电性和大的有效比表面积,因而对肼的电催化氧化反应有非常大的电流响应.采用伏安法、扫描电镜、电化学阻抗谱、红外光谱和紫外-可见光谱对修饰电极进行了表征.采用伏安法研究了在磷酸盐缓冲溶液(pH=7.0)中MBCPE/Fe3O4NPs/DPB电极上肼的电化学行为.作为电化学传感器, MBCPE/Fe3O4NPs/DPB电极对肼氧化反应表现出极高的电催化活性.在DPB存在下,肼的氧化电势下降,但其催化电流增加.电催化电流与肼浓度在0.1–0.4和0.7–12.0μmol/L二个区间内表现出线性关系,检测限为18.0 nmol/L.另外,研究了MBCPE/Fe3O4NPs/DPB电极同时检测肼和苯酚的性能.伏安实验结果显示,苯酚的线性区域为100–470μmol/L,检测限为24.3μmol/L.采用此电极检测了水样品中的肼和苯酚.     

A mild oxidative aryl radical addition into alkenes by aerobic oxidation of arylhydrazines

A mild and practical oxyarylation of alkenes by oxidative radical addition has been developed by using aerobic oxidation of hydrazine compounds. The use of a catalytic amount of potassium ferrocyanide trihydrate (K₄[Fe(CN)₆]?3 H₂O) and water accelerated this radical reaction to give peroxides or alcohols from simple alkenes in good yields. The environmentally friendly and economical radical reactions were achieved at room temperature in the presence of iron catalyst, oxygen gas, and water. A method involving aniline as a radical precursor is also described.     

Study of radiation-induced polymerization of vinyl monomers adsorbed on inorganic substances. IX. Preirradiation polymerization of styrene–silica gel system

Preirradiation polymerization of the styrene–silica gel system was studied in detail. Both graft polymers and homopolymers have bimodal GPC spectra. High molecular weight peaks were formed in a radical mechanism and the low molecular weight peaks were formed in a cationic mechanism as same as those in the simultaneous irradiation polymerization. The rate of formation of the low molecular weight peaks was very high compared with that of the high molecular weight peaks. Monomer conversion and percent grafting leveled off at about 1–2 Mrad. Radiation dose dependence of the four peaks were different from each other. Monomer conversion and percent grafting decreased as the preheating temperature of silica gel increased. The amount of the low molecular weight peaks of graft polymers depended on the number of silanol groups, as in the case of the simultaneous irradiation polymerization. A reaction mechanism for the preirradiation polymerization is proposed based on the results obtained.     

Selective catalytic oxidation of NO over iron and manganese oxides supported on mesoporous silica

The selective catalytic oxidation （SCO） of NO was studied on a catalyst consisting of iron-manganese oxide supported on mesoporous silica （MPS） with different Mn/Fe ratios. Effects of the amount of manganese and iron, oxygen, and calcination temperature on NO conversion were also investigated. It was found that the Mn-Fe/MPS catalyst with a Mn/Fe molar ratio of 1 showed the highest activity at the calcination temperature of 400 °C. The results showed that over this catalyst, NO conversion reached 70% under the condition of 280 °C and a space velocity of 5000 h-1. SO2 and H2O had no adverse impact on the reaction activity when the SCO reaction temperature was above 240 °C. In addition, the SCO activity was suppressed gradually in the presence of SO2 and H2O below 240 °C, and such an effect was reversible after heating treatment.     

Thioglycolic acid grafted onto silica gel and its properties in relation to extracting cations from ethanolic solution determined by calorimetric technique

Thioglycolic acid was immobilized onto silica gel surface using 3-aminopropyltrimethoxysilane as precursor silylating agent to yield silica. The amount of thioglycolic acid immobilized was 1.03 mmol per gram of silica. This new surface displayed a chelating moiety containing nitrogen, sulfur, and oxygen basic centers which are potentially capable of extracting cations from ethanolic solution, such as MCl3 ( M=Fe, Cr, and Mo). This process of extraction was carried out by the batch method when similar chemisorption isotherms were observed for all cations. The data were adjusted to a modified Langmuir equation. The sequence of the maximum retention capacity was Cr(III) > Mo(III) > Fe(III). The same adsorption was determined by calorimetric titration and the enthalpic values of -35.75 +/- 0.02, 32.90 +/- 0.15, and -84.08 +/- 0.12 kJmol(-1) for chromium, molybdenum, and iron, respectively, were obtained. From the calculated Gibbs free energy -23.4 +/- 0.2, -27.2 +/- 0.2, and -32.7 +/- 0.3 kJmol(-1), the variations in entropy obtained were 42 +/- 1, 201 +/- 1, 172 +/- 1 JK(-1)mol(-1) for the same sequence. All thermodynamic values are in agreement with the spontaneity of the proposed cation-basic center interactions for these chelating processes.     

29Si and 27Al MAS NMR spectra of mullites from different kaolinites

Mullites synthesized from four kaolinites with different random defect densities have been studied by 27Al and 29Si magic angle spinning nuclear magnetic resonance spectroscopy (MAS NMR) and X-ray diffraction (XRD). All these mullites show the same XRD pattern. However, 29Si and 27Al MAS NMR spectra reveal that the mullites derived from kaolinites with high defect densities, have a sillimanite-type Al/Si ordering scheme and are low in silica, whereas those mullites derived from kaolinites with low defect densities, consist of both sillimanite- and mullite-type Al/Si ordering schemes and are rich in silica.     

Cupric sulfate–hydrazine system as an initiator of vinyl polymerization. II. Polymerization of methyl methacrylate in aqueous solution in the absence of oxygen

The cupric sulfate–hydrazine system has been used to initiate the aqueous solution polymerization of methyl methacrylate at pH 9.25 in the absence of oxygen. There is no decomposition of hydrazine on the surface of the reduced cupric hydroxide until a flocculant precipitate is formed (cupric sulfate concentration of about 10^?3 mole/1). Below this concentration, the initiating reaction occurs solely in solution, the rate of polymerization decreasing when the reaction mixture becomes depleted in cupric ions. When a suitable surface area of the precipitated polymer is attained, adsorption and decomposition of hydrazine occurs on its surface, causing further initiation of polymerization.     

Site-specific synthesis of oxo-bridged mixed-valence binuclear complexes on mesoporous silica

We report the site-specific synthesis of mixed valence TiIV-O-FeII complexes within the pores of ordered mesoporous silica (SBA-15). By using 6-di- tert-butylpyridine as the selective activator of tripodally linked TiIV-OH groups of Ti-grafted SBA-15, the FeCl2.4H2O complexes reacted selectively with the nucleophilic TiIV-O(-) groups. The formation of Si-O-FeII byproducts, due to the reaction with the abundant Si-OH groups, was successfully restricted and the selectivity for forming the TiIV-O-FeII complexes exceeded 80%. The metal-metal interaction of TiIV-O-FeII complexes was confirmed by the appearance of TiIV/FeII --> TiIII/Fe III metal-to-metal charge transfer band, and their coordination, valency, and spin state were characterized by diffuse transmission UV-vis, Fourier transform IR, and Fe K-edge X-ray absorption fine structure measurements. It was also confirmed that the present methods can be extended to other metal combinations of TiIV-O-NiII and TiIV-O-MnII. The electron transfer processes occurring under photoinduced metal-to-metal charge transfer of oxo-bridged mixed valence complexes on silica supports have recently been proven as a new class of visible-light-sensitive redox centers. Thus, the present synthetic procedure allows the fabrication of a variety of photochemical reaction centers according to the molecular-level design.     

Am(III) adsorption on oxides of aluminium and silicon: effects of humic substances,pH, and ionic strength

The adsorption of Am(III) (total concentration 10(-9) mol/l) on alumina, silica, and hematite was studied by a batch technique. The effects of pH, ionic strength, and humic substances on the adsorption of Am(III) on alumina and silica were investigated, and the adsorption isotherms of Am(III) on alumina and silica at different pH values were determined. It was found that compared with the adsorption of Am(III) on alumina, the adsorbability of silica on the basis of mass is less, the relative adsorption rate on silica is slower, the sensitivity of adsorption on silica to ionic strength is less, the dependence of adsorption on silica on pH is gentler, and consequently that the adsorption characteristics of Am(III) on alumina and silica are distinctly different. The negative effect of fulvic acid on the adsorption on silica and the positive effect of humic acid on the adsorption on alumina were found. In contrast to the Am(III) adsorption on alumina and silica, a tremendously high adsorbability of Am(III) on hematite was found. The sequence of adsorbabilities of Am(III) on the basis of mass is Fe2O3 > Al2O3 > SiO2.