Self-assembly of supramolecular light-harvesting arrays from covalent multi-chromophore perylene-3,4:9,10-bis(dicarboximide) building blocks

We report on two multi-chromophore building blocks that self-assemble in solution and on surfaces into supramolecular light-harvesting arrays. Each building block is based on perylene-3,4:9,10-bis(dicarboximide) (PDI) chromophores. In one building block, N-phenyl PDI chromophores are attached at their para positions to both nitrogens and the 3 and 6 carbons of pyromellitimide to form a cross-shaped molecule (PI-PDI(4)). In the second building block, N-phenyl PDI chromophores are attached at their para positions to both nitrogens and the 1 and 7 carbons of a fifth PDI to produce a saddle-shaped molecule (PDI(5)). These molecules self-assemble into partially ordered dimeric structures (PI-PDI(4))(2) and (PDI(5))(2) in toluene and 2-methyltetrahydrofuran solutions with the PDI molecules approximately parallel to one another primarily due to pi-pi interactions between adjacent PDI chromophores. On hydrophobic surfaces, PDI(5) grows into rod-shaped nanostructures of average length 130 nm as revealed by atomic force microscopy. Photoexcitation of these supramolecular dimers in solution gives direct evidence of strong pi-pi interactions between the excited PDI chromophore and other PDI molecules nearby based on the observed formation of an excimer-like state in <130 fs with a lifetime of about 20 ns. Multiple photoexcitations of the supramolecular dimers lead to fast singlet-singlet annihilation of the excimer-like state, which occurs with exciton hopping times of about 5 ps, which are comparable to those observed in photosynthetic light-harvesting proteins from green plants.     

Ultrafast aggregate-to-aggregate energy transfer within self-assembled light-harvesting columns of zinc phthalocyanine tetrakis(perylenediimide)

Light harvesting in photosynthetic antenna proteins involves a series of highly efficient ultrafast energy transfers between spectroscopically different populations of chlorophylls. Several strategies have recently been employed to mimic this natural energy transfer process, including polymers, dendrimers, and oligomeric porphyrin arrays linked by covalent bonds or by self-assembly. In all of these systems, excitation energy transfer occurs from one molecule to another, while very few of them involve energy transfer from one very strongly interacting chromophore aggregate to another such aggregate. Here we report the synthesis and characterization of a covalent zinc phthalocyanine-2,3,9,10,16,17,23,24-octacarboxytetraimide in which all four imide nitrogen atoms are substituted with N-octyl-N'-(4-aminophenyl)-1,7(3',5'di-tert-butylphenoxy)perylene-3,4:9,10-bis(dicarboximide) (ZnPcIm4-PDI4). The individual molecules self-assemble into stacked heptamers in solution as evidenced by small-angle X-ray scattering and form long fibrous structures in the solid as evidenced by TEM. The ZnPcIm4 and PDI molecules both stack in register with the same components in an adjacent covalent building block. Ultrafast energy transfer occurs with tau = 1.3 ps from the aggregated peripheral PDI chromophores to the core ZnPcIm4 chromophore aggregate. Exciton hopping between the ZnPcIm4 chromophores occurs with tau = 160 fs.     

Excited-state symmetry breaking in cofacial and linear dimers of a green perylenediimide chlorophyll analogue leading to ultrafast charge separation

Photoexcitation of chromophoric dimers constrained to a symmetric pi-stacked geometry by their molecular structure usually produces excimers independent of solvent polarity, while dimers with edge-to-edge perpendicular pi systems undergo excited-state symmetry breaking in highly polar solvents leading to intradimer charge separation. We present direct evidence for symmetry breaking in the lowest excited singlet state of a symmetric cofacial dimer of 1,7-bis(pyrrolidin-1'-yl)-perylene-3,4:9,10-bis(dicarboximide) (5PDI) in the low polarity solvent toluene to produce a radical ion pair quantitatively. This dimer, cof-5PDI2, was synthesized by attaching two 5PDI chromophores via imide groups to a xanthene spacer. For comparison, a linear symmetric dimer, lin-5PDI2, was prepared in which the 5PDI chromophores are linked end-to-end via a N-N single bond between their imides. The edge-to-edge pi systems of the 5PDI chromophores within lin-5PDI2 are perpendicular to one another. Ground-state absorption spectra of both 5PDI dimers show exciton coupling, which is consistent with the orientation of the 5PDI chromophores relative to one another. Ultrafast transient absorption spectroscopy following excitation of the dimers with 700 nm, 100 fs laser pulses shows that quantitative intradimer electron transfer occurs in cof-5PDI2 in toluene with tau = 0.17 ps followed by charge recombination to the ground state with tau = 222 ps. Similar measurements on lin-5PDI2 reveal that photoinduced electron transfer does not occur in toluene, but occurs in more polar solvents such as 2-methyltetrahydrofuran, wherein tau = 55 ps for charge separation and tau = 99 ps for charge recombination. Excited-state symmetry breaking in 5PDI dimers provides new routes to biomimetic charge separation and storage assemblies that can be more easily prepared and modified than those based on multiple tetrapyrrole macrocycles.     

Electron hopping in pi-stacked covalent and self-assembled perylene diimides observed by ENDOR spectroscopy

We have carried out room-temperature, solution-phase electron paramagnetic resonance and electron-nuclear double resonance studies on a series of radical anions based upon perylene-3,4:9,10-bis(dicarboximide) (PDI). The following systems were studied: two PDI monomers, a covalent, cofacial dimer, and two covalent trefoil-PDI3 molecules, one of which self-assembles into pi-stacked dimers. Full sharing of the unpaired electron in the covalent and self-assembled dimers is revealed by a halving of the hyperfine coupling constants in these species, relative to those of the monomers. These results and the electronic absorption spectra show that electron hopping on a >107 Hz time scale occurs between a reduced and neutral chromophoric pair.     

Tuning orbital energetics in arylene diimide semiconductors. materials design for ambient stability of n-type charge transport

Structural and electronic criteria for ambient stability in n-type organic materials for organic field-effect transistors (OFETs) are investigated by systematically varying LUMO energetics and molecular substituents of arylene diimide-based materials. Six OFETs on n+-Si/SiO2 substrates exhibit OFET response parameters as follows: N,N'-bis(n-octyl)perylene-3,4:9,10-bis(dicarboximide) (PDI-8): mu = 0.32 cm2 V(-1) s(-1), Vth = 55 V, I(on)/I(off) = 10(5); N,N'-bis(n-octyl)-1,7- and N,N'-bis(n-octyl)-1,6-dibromoperylene-3,4:9,10-bis(dicarboximide) (PDI-8Br2): mu = 3 x 10(-5) cm2 V(-1) s(-1), Vth = 62 V, I(on)/I(off) = 10(3); N,N'-bis(n-octyl)-1,6,7,12-tetrachloroperylene-3,4:9,10-bis(dicarboximide) (PDI-8Cl4): mu = 4 x 10(-3) cm2 V(-1) (s-1), Vth = 37 V, I(on)/I(off) = 10(4); N,N'-bis(n-octyl)-2-cyanonaphthalene-1,4,5,8-bis(dicarboximide) (NDI-8CN): mu = 4.7 x 10(-3) cm2 V(-1) s(-1), Vth = 28, I(on)/I(off) = 10(5); N,N'-bis(n-octyl)-1,7- and N,N'-bis(n-octyl)-1,6-dicyanoperylene-3,4:9,10-bis(dicarboximide) (PDI-8CN2): mu = 0.13 cm2 V(-1) s(-1), Vth = -14 V, I(on)/I(off) = 10(3); and N,N'-bis(n-octyl)-2,6-dicyanonaphthalene-1,4,5,8-bis(dicarboximide) (NDI-8CN2): mu = 0.15 cm2 V(-1) s(-1), Vth = -37 V, I(on)/I(off) = 10(2). Analysis of the molecular geometries and energetics in these materials reveals a correlation between electron mobility and substituent-induced arylene core distortion, while Vth and I(off) are generally affected by LUMO energetics. Our findings also indicate that resistance to ambient charge carrier trapping observed in films of N-(n-octyl)arylene diimides occurs at a molecular reduction potential more positive than approximately -0.1 V (vs SCE). OFET threshold voltage shifts between vacuum and ambient atmosphere operation suggest that, at E(red1) < -0.1 V, the interfacial trap density increases by greater than approximately 1 x 10(13) cm(-2), while, for semiconductors with E(red1) > -0.1 V, the trap density increase is negligible. OFETs fabricated with the present n-type materials having E(red1) > -0.1 V operate at conventional gate biases with minimal hysteresis in air. This reduction potential corresponds to an overpotential for the reaction of the charge carriers with O2 of approximately 0.6 V. N,N'-1H,1H-Perfluorobutyl derivatives of the perylene-based semiconductors were also synthesized and used to fabricate OFETs, resulting in air-stable devices for all fluorocarbon-substituted materials, despite generally having E(red1) < -0.1 V. This behavior is consistent with a fluorocarbon-based O2 barrier mechanism. OFET cycling measurements in air for dicyanated vs fluorinated materials demonstrate that energetic stabilization of the charge carriers results in greater device longevity in comparison to the OFET degradation observed in air-stable semiconductors with fluorocarbon barriers.     

Combining light-harvesting and charge separation in a self-assembled artificial photosynthetic system based on perylenediimide chromophores

Self-assembly of robust perylenediimide chromophores is used to produce an artificial light-harvesting antenna structure that in turn induces self-assembly of a functional special pair that undergoes ultrafast, quantitative charge separation. The structure consists of four 1,7-(3',5'-di-tert-butylphenoxy)perylene-3,4:9,10-perylene-3,4:9,10-bis(carboximide) (PDI) molecules attached to a single 1,7-bis(pyrrolidin-1-yl)perylene-3,4:9,10-perylene-3,4:9,10-bis(carboximide) (5PDI) core, which self-assembles to form (5PDI-PDI4)2 in toluene. The system is characterized using both structural methods (NMR, SAXS, mass spectroscopy, and GPC) and photophysical methods (UV-vis, time-resolved fluorescence, and femtosecond transient absorption spectroscopy). Energy transfer from (PDI)2 to (5PDI)2 occurs with tau = 21 ps, followed by excited-state symmetry breaking of 1*(5PDI)2 to produce 5PDI*+-5PDI*- quantitatively with tau = 7 ps. The ion pair recombines with tau = 420 ps. Electron transfer occurs only in the dimeric system and does not occur in the disassembled monomer, thus mimicking both antenna and special pair function in photosynthesis.     

Photoinduced charge separation in self-assembled cofacial pentamers of zinc-5,10,15,20-tetrakis(perylenediimide)porphyrin

A bichromophoric electron donor-acceptor molecule composed of a zinc tetraphenylporphyrin (ZnTPP) surrounded by four perylene-3,4:9,10-bis(dicarboximide)(PDI) chromophores (ZnTPP-PDI(4)) was synthesized. The properties of this molecule were compared to a reference molecule having ZnTPP covalently bound to a single PDI (ZnTPP-PDI). In toluene, ZnTPP-PDI(4) self-assembles into monodisperse aggregates of five molecules arranged in a columnar stack, (ZnTPP-PDI(4))(5). The monodisperse nature of this assembly contrasts sharply with previously reported ZnTPP-PDI(4) derivatives having 1,7-bis(3,5-di-t-butylphenoxy) groups (ZnTPP-PPDI(4)). The size and structure of this assembly in solution was determined by small angle X-ray scattering (SAXS) using a high flux synchrotron X-ray source. The ZnTPP-PDI reference molecule does not aggregate. Femtosecond transient absorption spectroscopy shows that laser excitation of both ZnTPP-PDI and (ZnTPP-PDI(4))(5) results in quantitative formation of ZnTPP(+*)-PDI(-*) radical ion pairs in a few picoseconds. The transient absorption spectra of (ZnTPP-PDI(4))(5) suggest that the PDI(-*) radicals interact strongly with adjacent PDI molecules within the columnar stack. Charge recombination occurs more slowly within (ZnTPP-PDI(4))(5)(tau= 4.8 ns) than it does in ZnTPP-PDI (tau= 3.0 ns) producing mostly ground state as well as a modest yield of the lowest triplet state of PDI ((3*)PDI). Formation of (3*)PDI occurs by rapid spin-orbit induced intersystem crossing (SO-ISC) directly from the singlet radical ion pair as evidenced by the electron spin polarization pattern exhibited by its time-resolved electron paramagnetic resonance spectrum.     

Competition between singlet fission and charge separation in solution-processed blend films of 6,13-bis(triisopropylsilylethynyl)pentacene with sterically-encumbered perylene-3,4:9,10-bis(dicarboximide)s

The photophysics and morphology of thin films of N,N-bis(2,6-diisopropylphenyl)perylene-3,4:9,10-bis(dicarboximide) (1) and the 1,7-diphenyl (2) and 1,7-bis(3,5-di-tert-butylphenyl) (3) derivatives blended with 6,13-bis(triisopropylsilylethynyl)pentacene (TIPS-Pn) were studied for their potential use as photoactive layers in organic photovoltaic (OPV) devices. Increasing the steric bulk of the 1,7-substituents of the perylene-3,4:9,10-bis(dicarboximide) (PDI) impedes aggregation in the solid state. Film characterization data using both atomic force microscopy and X-ray diffraction showed that decreasing the PDI aggregation by increasing the steric bulk in the order 1 < 2 < 3 correlates with a decrease in the density/size of crystalline TIPS-Pn domains. Transient absorption spectroscopy was performed on ~100 nm solution-processed TIPS-Pn:PDI blend films to characterize the charge separation dynamics. These results showed that selective excitation of the TIPS-Pn results in competition between ultrafast singlet fission ((1*)TIPS-Pn + TIPS-Pn → 2 (3*)TIPS-Pn) and charge transfer from (1*)TIPS-Pn to PDIs 1-3. As the blend films become more homogeneous across the series TIPS-Pn:PDI 1 → 2 → 3, charge separation becomes competitive with singlet fission. Ultrafast charge separation forms the geminate radical ion pair state (1)(TIPS-Pn(+?)-PDI(-?)) that undergoes radical pair intersystem crossing to form (3)(TIPS-Pn(+?)-PDI(-?)), which then undergoes charge recombination to yield either (3*)PDI or (3*)TIPS-Pn. Energy transfer from (3*)PDI to TIPS-Pn also yields (3*)TIPS-Pn. These results show that multiple pathways produce the (3*)TIPS-Pn state, so that OPV design strategies based on this system must utilize this triplet state for charge separation.     

Copper-promoted N-arylations of cyclic imides within six-membered rings: a facile route to arylene-based organic materials

[reaction: see text] Cyclic imides within six-membered rings are shown to undergo efficient N-arylation using various arylboronic esters mediated by copper(II) acetate in the presence of an amine base and oxygen atmosphere with gentle heating. Until now, the synthesis of N-arylated cyclic imides having six-membered rings was restricted largely to strongly heating anilines in the presence of anhydrides. This reaction is applicable to the synthesis of new organic materials based on arylene imide and bis(imide) dyes, such as perylene-3,4:9,10-bis(dicarboximide)s.     

Photoinitiated charge transport in supramolecular assemblies of a 1,7,N,N'-tetrakis(zinc porphyrin)-perylene-3,4:9,10-bis(dicarboximide)

We report the synthesis and photophysical characterization of a multichromophore array, (Z3PN)4PDI, consisting of four zinc 5-phenyl-10,15,20-tri(n-pentyl)porphyrins (Z3PN) attached to the 1,7,N,N'-positions of perylene-3,4:9,10-bis(dicarboximide) (PDI). The dynamics of energy and charge transport within this system were compared to those of two model compounds, N,N'-(Z3PN)2PDI and 1,7-(Z3PN)2PDI. The symmetry of the lowest unoccupied and highest occupied molecular orbitals of PDI results in significantly different electronic couplings between Z3PN and PDI when they are connected at the 1,7-positions vs the N,N'-positions of PDI. This results in two distinct pathways for electron transfer in (Z3PN)4PDI. Using a combination of metal-ligand binding with the bidentate ligand 1,4-diazabicyclo[2.2.2.]octane (DABCO) and pi-pi stacking, (Z3PN4)PDI forms a supramolecular assembly, [[(Z3PN)4PDI]2-DABCO4]2, in toluene solution. The structure of this hierarchical assembly is characterized with the use of solution-phase X-ray scattering techniques and demonstrates both efficient light harvesting and facile charge separation and transport using multiple pathways.     

Tetrathiafulvalene in a perylene-3,4:9,10-bis(dicarboximide)-based dyad: a new reversible fluorescence-redox dependent molecular system

A donor-acceptor dyad system involving tetrathiafulvalene (TTF) as donor attached by a flexible spacer to perylene-3,4:9,10-bis(dicarboximide) (PDI) as acceptor was synthesized and characterized. The strategy used the preliminary synthesis of an unsymmetrical PDI unit bearing an alcohol functionality as anchor group. Single-crystal analysis revealed a highly organized arrangement in which all PDI molecules are packed in a noncentrosymmetrical pattern. It was shown that the fluorescence emission intensity of the TTF-PDI dyad can be reversibly tuned depending on the oxidation states of the TTF unit. This behavior is attributed to peculiar properties of TTF linked to a PDI acceptor, which fluoresces intrinsically. Consequently, this dyad can be considered as a new reversible fluorescence-redox dependent molecular system.     

取代基对苝酰亚胺衍生物气敏传感性能的影响

制备了两类酰胺位置含有吸电子基团的苝酰亚胺衍生物N,N′-双(三氟乙基)-1,7-二溴-3,4,9,10-苝二酰亚胺(PTCDI-3F)和N,N′-双(七氟丁基)-1,7-二溴-3,4,9,10-苝二酰亚胺(PTCDI-7F),并测定了其气敏传感性能.结果表明,两类苝酰亚胺衍生物在水合肼气氛中(10ppm)的灵敏度变化值基本相同、电阻均降低约4个数量级.其原因在于两者具有相同的最低空轨道能级.这表明酰胺位取代基对苝酰亚胺衍生物气敏传感性能的影响较小.     

Bis(n-octylamino)perylene-3,4:9,10-bis(dicarboximide)s and their radical cations: synthesis, electrochemistry, and ENDOR spectroscopy

1,6- and 1,7-bis(n-octylamino)perylene-3,4:9,10-bis(dicarboximide) were synthesized by reaction of n-octylamine with the corresponding dibromo compounds. These compounds display intense charge-transfer optical transitions in the visible spectrum (approximately 550-750 nm) and fluoresce weakly (Phi(F) < 0.06). Cyclic voltammetry reveals that each chromophore undergoes facile and reversible oxidation and reduction. Spectroelectrochemical studies show that the radical cations of these chromophores are stable and show no signs of deprotonation of the secondary amines. Electron paramagnetic resonance (EPR) and electron-nuclear double resonance (ENDOR) studies of the chemically generated radical cations of these chromophores corroborate the spectroelectrochemical data by showing that the radical cations persist for days at room temperature in methylene chloride solution. These experiments and complementary density functional theory (DFT) calculations provide a comprehensive picture of the molecular orbitals, spin density distributions, and geometries of the radical cations. The redox properties and stability of these alkylamino-functionalized perylene compounds make them a valuable addition to the family of robust perylene-based chromophores that can be used to develop new photoactive charge transport materials.     

Ultrafast photoinduced charge separation resulting from self-assembly of a green perylene-based dye into pi-stacked arrays

Condensation of 3,4,5-tris(n-dodecyloxy)aniline with the green chromophore 1,7-bis(N-pyrrolidinyl)perylene-3,4;9,10-tetracarboxylic dianhydride yields N,N'-bis(3,4,5-tris(n-dodecyloxy)phenyl)-1,7-bis(N-pyrrolidinyl)perylene-3,4;9,10-bis(dicarboximide), 5PDI-TAP, which absorbs light strongly from 550 to 750 nm. 5PDI-TAP dissolves readily in methylcyclohexane (MCH), resulting in self-assembly into H-aggregates. Small-angle X-ray scattering data obtained on 10(-4) M solutions of 5PDI-TAP in MCH show that the aggregates are pi-stacked monodisperse pentamers. Femtosecond transient absorption spectroscopy on solutions of (5PDI-TAP)5 in MCH shows evidence of charge separation occurring with tau < or = 150 fs between adjacent stacked members of 5PDI-TAP within the pentamer followed by charge recombination with tau = 860 ps. Transmission electron microscopy of 5PDI-TAP films cast from solution show isolated bundles of columnar aggregates. (5PDI-TAP)n is a potentially useful material for organic photovoltaics because efficient photoinduced charge generation is an intrinsic property of the assembly.     

Making a molecular wire: charge and spin transport through para-phenylene oligomers

Functional molecular wires are essential for the development of molecular electronics. Charge transport through molecules occurs primarily by means of two mechanisms, coherent superexchange and incoherent charge hopping. Rates of charge transport through molecules in which superexchange dominates decrease approximately exponentially with distance, which precludes using these molecules as effective molecular wires. In contrast, charge transport rates through molecules in which incoherent charge hopping prevails should display nearly distance independent, wirelike behavior. We are now able to determine how each mechanism contributes to the overall charge transport characteristics of a donor-bridge-acceptor (D-B-A) system, where D = phenothiazine (PTZ), B = p-oligophenylene, and A = perylene-3,4:9,10-bis(dicarboximide) (PDI), by measuring the interaction between two unpaired spins within the system's charge separated state via magnetic field effects on the yield of radical pair and triplet recombination product.     

Self-assembled aggregates of amphiphilic perylene diimide-based semiconductor molecules: effect of morphology on conductivity

Two amphiphilic perylenetetracarboxylic diimide derivatives modified with different side chains at imide nitrogen, N-n-hexyl-N'-(2-hydroxyethyl)-1,7-di(4'-t-butyl)phenoxy-perylene-3,4:9,10-tetracarboxylic diimide (PDI 1) and N,N'-di(2-hydroxyethyl)-1,7-di(4'-t-butyl)phenoxy-perylene-3,4:9,10-tetracarboxylic diimide (PDI 2), were fabricated into organic nanostructures via solution-phase self-assembly. Their self-assembling properties in methanol and n-hexane have been comparatively studied by electronic absorption, fluorescence, and Fourier transform infrared spectroscopy (FT-IR). The morphologies and structures of the self-assemblies were examined by scanning electronic microscopy (SEM), atomic force microscopy (AFM), as well as X-ray diffraction (XRD) techniques. The conducting properties were evaluated by current-voltage (I-V) measurements. Due to the presence of different number of hydroxyethyl groups in the molecule of PDI 1 and PDI 2, the self-assembly of the two molecules in methanol and n-hexane results in nanostructures with distinctly different morphology as follows: nanobelts and nanoleaves for PDI 1 and nanobelt dendrites and nanosheets for PDI 2, respectively. Analysis of the spectral change for the aggregates relative to that of monomeric PDI in solution revealed that in polar and apolar solvents, both nanobelts and nanoleaves precipitated from PDI 1 adopt the H aggregation mode, whereas nanobelt dendrites and nanosheets from PDI 2 adopt H and J aggregation mode, respectively, implying the effect of both side-chain substituent and solvent on tuning the intermolecular stacking. Furthermore, the conductivity of the aggregates of either PDI 1 or PDI 2 from methanol is more than ca. 1 order of magnitude higher than those from n-hexane. In particular, the well-defined, one-dimensional (1D) nanobelts of PDI 1 show excellent semiconducting property with the electrical conductivity as high as 3.3×10(-3) S cm(-1), which might serve as promising candidates for applications in nano-electronics.     

Challenges in distinguishing superexchange and hopping mechanisms of intramolecular charge transfer through fluorene oligomers

The temperature dependence of intramolecular charge separation in a series of donor-bridge-acceptor molecules having phenothiazine (PTZ) donors, 2,7-oligofluorene FL(n) (n = 1-4) bridges, and perylene-3,4:9,10-bis(dicarboximide) (PDI) acceptors was studied. Photoexcitation of PDI to its lowest excited singlet state results in oxidation of PTZ via the FL(n) bridge. In toluene, the temperature dependence of the charge separation rate constants for PTZ-FL(n)-PDI, (n = 1-4) is relatively weak and is successfully described by the semiclassical Marcus equation. The activation energies for charge separation suggest that bridge charge carrier injection is not the rate limiting step. The difficulty of using temperature and length dependence to differentiate hopping and superexchange is discussed, with difficulties in the latter topic explored via an extension of a kinetic model proposed by Bixon and Jortner.     

Synthesis of water‐soluble perylenediimide‐functionalized polymer through esterification with poly(vinyl alcohol)

A new material has been prepared by covalent attachment of a perylene derivative, N‐(carboxyphenyl)‐N′‐(8‐pentadecyl)perylene‐3,4:9,10‐bis(dicarboximide) (PDI‐COOH), to poly(vinyl alcohol) (PVA) by esterification. The perylenediimide (PDI)‐modified PVA polymers are soluble in water and dimethylsulfoxide (DMSO). This solubility is conferred to the insoluble perylene derivative by the water‐soluble polymer. The materials have been characterized by hydrogen‐nuclear magnetic resonance, Fourier transform infrared spectra, X‐ray diffraction, and X‐ray photoelectron spectroscopy confirming the covalent attachment of the PDI to the polymer chains. The significant changes in the crystalline parameters and the thermal stability observed for the polymer after the esterification also confirm the covalent linkage with PDI. In addition, the PDI‐modified PVA shows good fluorescence both in solution (quantum yield ～0.2–0.25) and in solid suggesting that the PDI retains largely its photochemical and photophysical properties after immobilization. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3613–3622, 2010     

Fullerene C60-perylene-3,4:9,10-bis(dicarboximide) light-harvesting dyads: spacer-length and bay-substituent effects on intramolecular singlet and triplet energy transfer

Novel covalent fullerene C(60)-perylene-3,4:9,10-bis(dicarboximide) (C(60)-PDI) dyads (1-4) were synthesized and characterized. Their electrochemical and photophysical properties were investigated. Electrochemical studies show that the reduction potential of PDI can be tuned relative to C(60) by molecular engineering through altering the substituents on the PDI bay region. It was demonstrated using steady-state and time-resolved spectroscopy that a quantitative, photoinduced energy transfer takes place from the PDI moiety, acting as a light-harvesting antenna, to the C(60) unit, playing the role of energy acceptor. The bay-substitution (tetrachloro [1 and 2] or tetra-tert-butylphenoxy [3 and 4]) of the PDI antenna and the linkage length (C(2) [1 and 3] or C(5) [2 and 4]) to the C(60) acceptor are important parameters in the kinetics of energy transfer. Femtosecond transient absorption spectroscopy indicates singlet-singlet energy-transfer times (from the PDI to the C(60) unit) of 0.4 and 5 ps (1), 4.5 and 27 ps (2), 0.8 and 12 ps (3), and 7 and 50 ps (4), these values being ascribed to two different conformers for each C(60)-PDI system. Subsequent triplet-triplet energy-transfer times (from the C(60) unit to the PDI) are slower and in the order of 0.8 ns (1), 6.2 ns (2), 2.7 ns (3), and 9 ns (4). Nanosecond transient absorption spectroscopy of final PDI triplet states show a marked influence of the bay substitution (tetrachloro- or tetra-tert-butylphenoxy), and triplet-state lifetimes (10-20 micros) and the PDI triplet quantum yields (0.75-0.52) were estimated. The spectroscopy showed no substantial solvent effect upon comparing toluene (non-polar) to benzonitrile (polar), indicating that no electron transfer is occurring in these systems.     

Excitation energy dependence of photoinduced processes in pentathiophene-perylene bisimide dyads with a flexible linker

In the present paper, photoinduced processes in the dyad molecules of pentathiophene (5T) and perylene-3,4:9,10-bis(dicarboximide) (PDI) with a flexible alkyl linker (propyl or hexyl) were investigated by using femtosecond laser flash spectroscopy in various solvents. Since absorption of 5T covers the wavelength region where absorption of PDI has minima and fluorescence of 5T overlaps with absorption of PDI, combination of 5T and PDI is favorable to achieve light energy harvesting as well as efficient electron transfer. When the sample was excited at the PDI moiety of the dyad, charge separation occurred almost quantitatively even in nonpolar solvent as well as in polar solvents. When the 5T moiety of the dyad was excited, efficient energy transfer to the PDI moiety from which charge separation occurred was confirmed, indicating that 5T acts as an antenna of the charge separation system, like a photosynthesis system of a plant. On the basis of Forster and Marcus theories and the estimated energy and electron-transfer rates, it was indicated that these dyads tend to take a folded structure in all solvents investigated.