蜂王浆中磷酸腺苷的提取及超高效液相色谱分析

比较了高氯酸提取、热水提取和热硫酸镁溶液提取3种提取方式对蜂王浆中磷酸腺苷三磷酸腺苷(ATP)、二磷酸腺苷(ADP)和单磷酸腺苷(AMP)的提取效果,发现在低温(低于4 ℃)下以5%高氯酸的提取效果最佳。采用超高效液相色谱-紫外检测法分析蜂王浆中的ATP, ADP和AMP的含量。以BEH Shield RP18柱(100 mm×2.1 mm,1.7 μm)为分析柱,以50 mmol/L的磷酸二氢铵(pH 6.5)和乙腈为流动相进行梯度洗脱,3种磷酸腺苷在4 min内实现了较好的分离。以加标王浆样品作添加回收率测定,ATP, ADP和AMP的回收率分别为84.1%～94.3%,86.2%～93.7%和91.0%～104.3%,相对标准偏差均小于10%。方法已被用于一些实际样品的分析,以了解ATP, ADP和AMP在蜂王浆样品中的分布情况。     

铜绿微囊藻中磷酸腺苷的提取及分析

比较了酸提取、有机溶剂提取、MgSO4水溶液加热提取以及MgSO4水溶液加热超声波提取4种方式对磷酸腺苷(ATP、ADP和AMP)的提取效果,确定以MgSO4水溶液加热超声波提取效果最佳。采用MgSO4加热超声波提取时,2 mL提取液对ATP、ADP和AMP的提取效果较好。将ATP、ADP和AMP的混合标准溶液放于沸水浴中保温时,随着保温时间的延长,对ATP和AMP的影响较大,而对ADP的影响相对较小。实验结果证明,以MgSO4水溶液为提取液,用100℃加热10 min后,在超声波细胞粉碎机中超声破碎10 min的提取效率最高,既简单又无毒。用反相高效液相色谱等强度洗脱分离与紫外检测分析藻细胞中的ATP、ADP和AMP的含量,在较短的时间内(10 min)实现了较好的分离,分析准确而快速,是一较好的定性和定量分析方法。ATP、ADP和AMP的回收率分别为88%~97%、103%~107%和109%~115%,均在80%~120%之间,并且标准偏差和相对标准偏差均小于10%,证实了可以用加热超声波破碎提取,HPLC分析ATP、ADP和AMP的方法来提取和分析藻细胞中的ATP、ADP和AMP。     

Effect of metabolic inhibitors on vasopressin-stimulated transport systems in the toad bladder.

Vasopressin increases the permeability of receptor cells to water and, in tissues such as toad bladder, to solutes such as urea. While cyclic AMP appears to play a major role in mediating the effects of vasopressin, there is evidence that activation of the water permeability system and the urea permeability system involves separate pathways. In the present study, we have shown that inhibitors of oxidative metabolism (rotenone, dinitrophenol, and methylene blue) selectively inhibit either vasopressin-stimulated water flow or vasopressin-stimulated urea transport. There was no inhibition, however, when exogenous cyclic AMP was substituted for vasopressin, and little to no inhibition when the potent analogue 8-bromoadenosine 3',5'-cyclic monophosphate (8-Br-cAMP) was employed. Rotenone had no effect on adenylate cyclase activity or cyclic AMP levels within the cell; dinitrophenol decreased adenylate cyclase activity minimally. Additional studies with vinblastine and nocodazole, inhibitors of microtubule assembly, demonstrated an inhibition of vasopressin and cyclic AMP-stimulated water flow but showed no effect on urea transport. We would conclude that water and urea transport, as examples of hormone-stimulated processes, have different links to cell metabolism, and that in addition to cyclic AMP, a non-nucleotide pathway may be involved in the action of vasopressin.     

A mass spectrometric method to simultaneously measure a biomarker and dilution marker in exhaled breath condensate

Exhaled breath condensate (EBC) collection is a simple and non-invasive method to sample airway secretions, but analysis is limited by extensive and variable dilution of airway secretions within the condensate. To overcome this limitation, we developed a sensitive and specific liquid chromatography/tandem mass spectrometry (LC/MS/MS) method to simultaneously detect adenyl purines as biomarkers of inflammation and urea as a dilution marker in EBC. Separation prior to mass spectrometry was achieved using a C18 column with methanol and formic acid as the mobile phase, and characteristic precursor to product ion transitions of m/z 268 to 136 (for adenosine), m/z 348 to 136 (for AMP), and m/z 61 to 44 (for urea) were monitored for quantification. To correct for matrix effects, isotopically labeled adenosine, AMP, and urea were used as internal standards. Using these methods, we detected urea and the adenyl purines adenosine and AMP in EBC from seven subjects with cystic fibrosis (CF) and seven healthy controls and found that the AMP/urea ratio was elevated in the CF samples. These results demonstrate that mass spectrometry can be used successfully in EBC analysis to simultaneously detect a biomarker for airway inflammation and control for variable dilution.     

Smart lanthanide coordination polymer fluorescence probe for mercury(II) determination

Lanthanide coordination polymers (LCPs) have recently emerged as attractive biosensor materials due to their flexible components, high tailorable properties and unique luminescence features. In this work, we designed a smart LCP probe of Tb-CIP/AMP {(CIP, ciprofloxacin) (AMP, adenosine monophosphate)} for Hg²⁺ detection by using lanthanide ions as metal nodes, CIP as ligand molecule, and AMP as bridging linker and recognition unit. Tb-CIP/AMP emits strong green luminescence due to the inclusion of AMP, which withdraws the coordinated water molecules and shields Tb³⁺ from the quenching effect of O–H vibration in water molecules. The subsequent addition of Hg²⁺ into Tb-CIP/AMP can strongly quench the fluorescence because of the specific coordination interaction between AMP and Hg²⁺. As a kind of Hg²⁺ nanosensor, the probe exhibited excellent selectivity for Hg²⁺ and high sensitivity with detection limit of 0.16 nM. In addition, the probe has long fluorescence lifetime up to millisecond and has been applied to detect Hg²⁺ in drinking water and human urine samples with satisfactory results. We envision that our strategy, in the future, could be extended to the designation of other LCP-based hypersensitive time-gated luminescence assays in biological media and biomedical imaging.     

Heat capacity of aqueous mixtures of diethanolamine with 2-amino-2-methyl-l-propanol

Heat capacities of aqueous mixtures of diethanolamine (DEA) with 2-amino-2-methyl-1-propanol (AMP) were measured over the temperature from 30 to 80 °C with a differential scanning calorimeter (DSC). For mole fractions of water ranging from 0.2 to 0.8, 16 concentrations of the DEA + AMP + water systems were studied. The binary system DEA + AMP with nine various concentrations were also studied. The heat capacities of aqueous mixtures of DEA with AMP presented in this study are, in general, of sufficient accuracy for most engineering-design calculations.     

核苷磷酸盐对含双芘侧链荧光敏感器化合物的荧光猝灭与分子识别

合成了一种在水溶液中对核苷磷酸盐ATP,ADP,AMP阴离子具有识别能力的荧光化学敏感器分子---化合物1。通过检测化合物1在水溶液中芘激基缔合物荧光发射强度随核苷磷酸盐、腺嘌呤等的加入而引起的变化,求出不同核苷磷酸盐及腺嘌呤对芘激基缔合物荧光发射的猝灭常数,并进行了比较研究。利用荧光发射强度随不同核苷磷酸盐引入而发生的变化计算出化合物1对不同核苷磷酸盐进行配位的配位稳定常数。结果表明所合成的化合物1对ATP有着良好的识别力选择功能。此外,还利用分子力学的计算方法对化合物1及其与核苷磷酸盐形成配合物后的分子构象及几何尺寸作了计算,并结合实验结果进行了初步讨论。     

Cu2+ and AMP complexation of enlarged tripodal polyamines

The synthesis, characterization, Cu2+ coordination and interaction with AMP of three tripodal polyamines are reported. The polyamines are based on the structure of the tetraamine (tren) which has been enlarged with three propylamino functionalities (), with a further anthrylmethyl fragment at one of its terminal primary nitrogens () or with naphthylmethyl fragments at its three ends (). The protonation constants of all three polyamines show that at pH 6, all six primary and secondary nitrogen atoms in the arms are protonated. The interaction with Cu2+ and AMP (adenosine-5'-monophosphate) has been studied by potentiometric, UV-Vis, ESI-MS spectroscopy and NMR techniques. pH-Metric, NMR and ESI/MS techniques indicate that and form with AMP adducts of 1:1, 2:1 and 3:1 AMP:L stoichiometries in water. This is one of the first examples for the formation of such complexes in aqueous solution. Formation of ternary complexes between , , , Cu2+ and AMP is observed. Paramagnetic NMR techniques have been used to obtain structural information on the binding mode of AMP to the Cu2+- binuclear complexes.     

Computational investigation of the strategy of DNA/RNA stabilization through the study of the conjugation of an oligonucleotide with silver and gold nanoparticles

This research deals with the potential of metallic nanoparticles in DNA/RNA stabilization. In this regard, the interaction of adenosine monophosphate (AMP) as a representative of the nucleotide family was theoretically investigated through density functional theory. AMP is a short form of DNA or RNA macromolecules that can interact with gold (Au) and silver (Ag) nanoparticles. The literature represents the thiolation of oligonucleotides as a suitable way for DNA/RNA adsorption on the stated nanoparticles. In this study, the role of different solvents on the thiolation of AMP is scrutinized. The results showed that acetonitrile is the best solvent for the thiolation of AMP with reaction enthalpy (ΔH) of −66.3 kJ/mol. The adsorption of thiolated adenosine monophosphate (TAMP) on the surface of Ag/Au nanoparticles (Ag/AuNP) was studied in different solvents, and in the gas phase. Our results revealed the interaction of TAMP with adsorption energies of −65.3 and −74.1 kJ/mol (gas phase), −54.8 and −62.5 kJ/mol (acetonitrile), and −59.2 and −70.6 kJ/mol (water) on AgNPs and AuNPs, respectively. AuNPs have a shorter bond distance in adsorption of TAMP compared to AgNPs (2.61 vs. 2.78 Å). For all systems, the frontier molecular orbital, the electronic charge passed through the nanoparticles, the density of states, and the molecular electrostatic potential were investigated. The results confirm the suitability of these nanoparticles as carriers for nucleotides that may be useful in gen delivery applications.     

Simultaneous Quantification of Ampicillin and Kanamycin in Water Samples Based on Lateral Flow Aptasensor Strip with an Internal Line

In this work, a simple and rapid method based on the lateral flow assay (LFA) has been developed for the detection of dual antibiotics. To achieve the quantitative assay and to reduce the non-specific adsorption, an internal system has been developed. A non-specific DNA was exploited as an internal standard and could be recognized by the DNA marker that was coated at the internal line. Two different kinds of aptamers were applied to recognize ampicillin (AMP) and kanamycin (KAM), and the distance between the detection line and conjugate pad was then optimized. Under the optimum conditions, the quantitative assays of AMP (R² = 0.984) and KAM (R² = 0.990) were achieved with dynamic ranges of 0.50 to 500.0 ng/L, and of 0.50 to 1000.0 ng/L, respectively. The LOQs of AMP and KAM were 0.06 ng/L and 0.015 ng/L, respectively. Finally, the proposed method has been successfully applied to analyze aquaculture water, tap water, and lake water, and hospital wastewater, indicating the established method could be used to monitor the environment.     

Theoretical study of the ring‐closing reaction of 5′‐AMP to cAMP and H2O in the gas phase

The ring‐closing reaction of 5′‐adenosine monophosphate (5′‐AMP) to generate cyclic 3′, 5′‐adenosine monophosphate (cAMP) and H₂O was theoretically investigated at the B3LYP/6‐31G**level. It was found that the ring‐closing reaction of 5′‐AMP may proceed in a synchronous way or in a stepwise way. For the latter, the reaction is a multichannel elimination reaction including inner H transfer. The potential energy surface of Path 3 is lowest in all the ring‐closing reaction paths. In addition, H shuttling reaction with the participation of a water molecule to act as a shuttle were also studied at the same level. The calculations indicate that the participation of a water molecule facilitates hydrogen transfer reaction. Our present calculations rationalized all the possible reaction channels. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

A Polymer/Peptide Complex‐Based Sensor Array That Discriminates Bacteria in Urine

A negatively charged poly(para ‐phenyleneethynylene) (PPE) forms electrostatic complexes with four positively charged antimicrobial peptides (AMP). The AMPs partially quench the fluorescence of the PPE and discriminate fourteen different bacteria in water and in human urine by pattern‐based fluorescence recognition; the AMP‐PPE complexes bind differentially to the components of bacterial surfaces. The bacterial species and strains form clusters according to staining properties (Gram‐positive and Gram‐negative) or genetic similarity (genus, species, and strain). The identification and data treatment is performed by pattern evaluation with linear discriminant analysis (LDA) of the collected fluorescence intensity data.     

From Molecular to Cluster Properties: Rotational Spectroscopy of 2-Aminopyridine and of Its Biomimetic Cluster with Water

We report the observation and analysis of the rotational spectrum of a 1:1 cluster between 2-aminopyridine and water (AMW) carried out with supersonic expansion Fourier transform microwave spectroscopy at 4.7–16.5 GHz. Measurements of the 2-aminopyridine monomer (AMP) were also extended up to 333 GHz for the room-temperature rotational spectrum and to resolved hyperfine splitting resulting from the presence of two ¹⁴N quadrupolar nuclei. Supersonic expansion measurements for both AMP and AMW were also carried out for two synthesized isotopic species with single deuteration on the phenyl ring. Nuclear quadrupole hyperfine structure has also been resolved for AMW and the derived splitting constants were used as an aid in structural analysis. The structure of the AMW cluster was determined from the three sets of available rotational constants and the hydrogen bonding configuration is compared with those for clusters with water of similarly sized single-ring molecules. Experimental results aided by quantum chemistry computations allow the conclusion that the water molecule is unusually strongly bound by two hydrogen bonds, OH^...N and O^...HN, to the NCNH atomic chain of AMP with the potential to replace hydrogen bonds to the identical structural segment in cytosine and adenine in CT and AT nucleic acid base pairs.     

NMR Study of Micelles Formed by Monoalkylphosphoryl Nucleosides

An NMR investigation of aqueous micelles obtained from surfactants bearing a nucleotide head attached to a linear hexadecyl hydrocarbon chain is presented. In particular, hexadecylphosphoryl‐adenosine (C16‐AMP) and hexadecylphosphoryl‐uridine (C16‐UMP) are studied by a combination of ¹H‐NMR techniques such as NOESY, ROESY, and spin‐lattice relaxation times. Both the intramolecular (i.e., within one surfactant monomer) and the intermolecular interactions (i.e., between neighboring surfactant molecules) are investigated. Relaxation measurements show that different groups of the surfactant molecule have distinct dynamic properties, the internal mobility decreases starting from the head group towards the Me terminal, while protons belonging to the base (which should be exposed to water) enjoy considerable freedom. The large upfield shift of the resonance of the terminal Me groups is evidence of a collective property of the micelle, an effect that, to the best of our knowledge, has not been reported so far. The micelles are studied both in water and salt solution, and the noticeable difference between the two cases is interpreted as a salt‐induced stiffening effect. By mixing C16‐AMP with C16‐UMP, mixed micelles are obtained, i.e., micelles that contain both surfactant monomers in each aggregate; our analysis shows that a significant interaction between the two complementary aromatic bases is present. All these results allow us to draw a picture of the surfactant in the micelle in which the plane of the aromatic ring lies parallel to the surface of the micelle and towards the aqueous medium. There are no basic structural differences between C16‐AMP and C16‐UMP micelles or C16‐AMP/C16‐UMP mixed micelles.     

Preparation and Optimization of PEGylated Nano Graphene Oxide-Based Delivery System for Drugs with Different Molecular Structures Using Design of Experiment (DoE)

Graphene oxide (GO), due to its 2D planar structure and favorable physical and chemical properties, has been used in different fields including drug delivery. This study aimed to investigate the impact of different process parameters on the average size of drug-loaded PEGylated nano graphene oxide (NGO-PEG) particles using design of experiment (DoE) and the loading of drugs with different molecular structures on an NGO-PEG-based delivery system. GO was prepared from graphite, processed using a sonication method, and functionalized using PEG 6000. Acetaminophen (AMP), diclofenac (DIC), and methotrexate (MTX) were loaded onto NGO-PEG particles. Drug-loaded NGO-PEG was then characterized using dynamic light scattering (DLS), Fourier transform infrared (FTIR), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), XRD. The DLS data showed that the drug-loaded NGO-PEG suspensions were in the size range of 200 nm–1.3 µm. The sonication time and the stirring rate were found to be the major process parameters which affected the average size of the drug-loaded NGO-PEG. FTIR, DSC, XRD, and SEM demonstrated that the functionalization or coating of the NGO occurred through physical interaction using PEG 6000. Methotrexate (MTX), with the highest number of aromatic rings, showed the highest loading efficiency of 95.6% compared to drugs with fewer aromatic rings (diclofenac (DIC) 70.5% and acetaminophen (AMP) 65.5%). This study suggests that GO-based nano delivery systems can be used to deliver drugs with multiple aromatic rings with a low water solubility and targeted delivery (e.g., cancer).     

Solubility of Gliclazide and Ion-Molecular Interactions with Aminopropanol in Aqueous Solutions

A new salt of gliclazide (GZD) was prepared and was shown to have a significantly higher aqueous solubility at physiological pH together with superior dissolution profiles in comparison to GZD employing an organic amino-alcohol base. Characterization by NMR, IR, DSC, conductometry and HPLC techniques concluded that an ion pair salt is formed between acidic GZD and basic aminopropanol (AMP). In addition to the presence of about 5% tightly bound water, hydrogen bonds appeared to form extensively between GZD, AMP and water molecules. Unlike many of solubility enhancing approaches, the salt did not hamper the permeability of GZD as shown by transport through Caco-2 cells model. In vivo studies on rats confirmed that the blood glucose lowering effect of GZD-AMP was significantly higher and more rapid compared to parent GZD indicating an enhanced overall performance of the prepared salt.     

Characterization of AMPylation on Threonine,Serine, and Tyrosine Using Mass Spectrometry

Recent studies have suggested that adenosine 5'-monophosphate (AMP) post-translational modification of proteins could represent a novel molecular signaling pathway. Mass spectrometric fragmentation characteristics of this modification have not previously been described and studied systematically. In this work, we therefore examined the fragmentation pattern of chemically synthesized peptides containing AMPylated Thr, Ser, and Tyr. The formation of characteristic ions and the influence of collision energy (CE) on the detection of characteristic ions and their relative peak intensity are reported. When peptide with AMPylated Ser/Thr underwent collision induced dissociation (CID), peaks at m/z 348.1, 136.1, and 250.1, fragments with AMP group attached, and fragments consistent with neutral loss of 347 Da were major characteristic ions; fragments consistent with neutral loss of 135 Da or 249 Da were weaker and not always detectable. The observations for Tyr AMPylation followed the same general patterns as those for Ser/Thr modification, with the exception that the ions detected for Tyr AMPylation did not include either the peak at m/z 348.1, or fragments with a mass shift of –347 Da. The results described in this paper highlight a series of diagnostic ions, which can be used not only to confidently identify the AMPylation site based on MS and MS/MS data, but also to selectively scan AMPylated peptides in complex protein mixtures.     

Development of a NACE method for simultaneous measurement of three adenosine monophosphate isomers in biomimicking prebiotic synthesis without sample pretreatment

A practical NACE method was developed for simultaneous determination of three adenosine monophosphate (AMP) isomers. Separation of three AMP isomers was achieved using 200 mM Tris/H(3)BO(3) in acetontrile/water (2:1 v/v) at pH* 10.0 as the running buffer and +25 kV as the applied voltage over a bare fused-silica capillary of 50 microm id x 375 microm od x 54.5 cm (46 cm to the detector window). At 260 nm, the calibration curves were linear in the range of 1-100 microg/mL. The detection limits were less than 0.70 microg/mL. The recovery ranged from 94.5 to 106.4%. The intraday RSDs of the migration times were between 2.1 and 3.0%. The developed NACE method has been successfully applied for the determination of three AMP isomers in the real samples of biomimicking prebiotic synthesis reaction between N-(O,O-diisopropyl) phosphoryl amino acid and adenosine.     

Aptasensor for ampicillin using gold nanoparticle based dual fluorescence–colorimetric methods

A gold nanoparticle based dual fluorescence–colorimetric method was developed as an aptasensor to detect ampicillin using its single-stranded DNA (ssDNA) aptamer, which was discovered by a magnetic bead-based SELEX technique. The selected aptamers, AMP4 (5′-CACGGCATGGTGGGCGTCGTG-3′), AMP17 (5′-GCGGGCGGTTGTATAGCGG-3′), and AMP18 (5′-TTAGTTGGGGTTCAGTTGG-3′), were confirmed to have high sensitivity and specificity to ampicillin (K _d, AMP7 = 9.4 nM, AMP17 = 13.4 nM, and AMP18 = 9.8 nM, respectively). The 5′-fluorescein amidite (FAM)-modified aptamer was used as a dual probe for observing fluorescence differences and color changes simultaneously. The lower limits of detection for this dual method were a 2 ng/mL by fluorescence and a 10 ng/mL by colorimetry for ampicillin in the milk as well as in distilled water. Because these detection limits were below the maximum residue limit of ampicillin, this aptasensor was sensitive enough to detect antibiotics in food products, such as milk and animal tissues. In addition, this dual aptasensor will be a more accurate method for antibiotics in food products as it concurrently uses two detection methods: fluorescence and colorimetry.     

Determination of cesium-137 in water by ion exchange

The preparation of ammonium molybdophosphate (AMP) precipitated directly into the IRA-900 resinous structure and their application to the determination of cesium-137 in waters are described. The sample of water is passed through the resin, which retains the cesium. After the removal of strontium-90 and potassium-40 with 0.1M ammonium nitrate solution, the cesium is eluted with 1M sodium hydroxide solution. The AMP dissolved in the alkaline solution is used to precipitate the cesium by acidifying the solution.