NMR and X-Ray Diffraction Study of Some Inositol Derivatives 1

Abstract

We have determined the preferred conformers in solution by a detailed NMR analysis using COSY and HETCOR experiments of three inositol isomers: myo (1), scyllo (2) and epi (3) plus sixteen derivatives of myo-inositol: 1,2,3,4,5,6-hexa-O-acetyl-myo-inositol (4), 1,2,-O-isopropylidene-myo-inositol (5), 1,2:4,5-di-O-isopropylidene-myo-inositol (6), 3,4,5,6-tetra-O-acetyl-1,2-O-isopropylidene-myo-inositol (7), 3,4,5,6-tetra-O-acetyl-myo-inositol (8), 1,2-O-isopropylidene-3,6-di-O-tosyl-myo-inositol (9), 1,2-O-isopropylidene-3,4,6-tri-O-tosyl-myo-inositol (10), 1,2:4,5-di-O-isopropylidene-3-O-tosyl-myo-inositol (11), 3,6-di-O-benzyl, 1,2:4,5-di-O-isopropylidene-myo-inositol (12), 3,6-di-O-benzyl-1,2-O-isopropylidene-myo-inositol (13), 3,6-di-O-benzyl-myo-inositol (14), 1,2-O-cyclohexylidene-myo-inositol (15), 1,2:4,5-di-O-cyclohexylidene-myo-inositol (16), 1,2:5,6-di-O-cyclohexylidene-myo-inositol (17), 1,3,5-O-(orthoformate)-myo-inositol (18) and 2-benzyl-1,3,5-O-(orthoformate)-myo-inositol (19). The X-ray diffraction structure of compounds 2, 6-8, 18 and 19 are reported.

     

Improved Preparation of Cyclohexylidene Derivatives of MYO-Imositol

Condensation of myo-inositol with 1,1-dimethoxy-cyclohexane in the presence of Nafion-H affords directly 1,2-O-cyclohexylidene-myo-inositol in 45 - 50% yield, along with 1,2:3,4-, 1,2:4,5- and 1, 2 : 5,6-di-O-cyclohexylidene-myo-inositols in lesser amounts.     

Total synthesis of the proposed structure of `brahol' and the structural revision

Proposed structure of brahol, a natural product, has been disproved by total synthesis of the proposed molecule from myo-inositol. Readily available 1,2;4,5-di-O-isopropylidene-myo-inositol, 3 was converted to 2,5-di-O-acetyl-1,6;3,4-di-O-isopropylidene-allo-inositol by epimerization of the di-triflate of 3. The acetyl group at O-5-position was selectively deprotected by aminolysis or methanolysis enabling the total synthesis of 5-O-methyl-allo-inositol, the proposed structure of brahol in six steps from myo-inositol. A comparison of spectral data of synthetic 5-O-methyl-allo-inositol with that reported for natural brahol revealed that the proposed structure of brahol is incorrect. A detailed structural revision revealed that brahol is nothing but quebrachitol. This study contradicts the first and only report on the natural occurrence of allo-inositol derivative.     

Iodonium Ion-Mediated Mannosylations of Myo-Inositol : Synthesis of a Mycobacteria Phospholipid Fragment

Abstract

Iodonium ion-mediated glycosylation of 1-O-allyl-3,4,5-tri-O-benzyl-6-O-para-methoxybenzyl-D/L-myo-inositol by ethyl 2-O-benzoyl-3,4,6-tri-O-benzyl-l-thio-α-D-mannopyranoside gave, after removal of the para-methoxybenzyl group and column chromatography, an α/β-mixture of the individual diastereoisomeric disaccharides. Subsequent stereospecific glycosylation of the α(1-2) linked mannopyranosyl-D-myo-inositol enantiomorph by the same ethyl 1-thiomannopyranoside donor afforded, after debenzoylarion, benzylation and subsequent deallylation the partially benzylated 2,6-dimannopyranosyl-D-myo-inositol derivative, the HO-1 position of which was phosphorylated, via the H-phosphonate method, with 1,2-dipalmitoyl-sn-glycerol. Oxidation of the intermediate phosphonate diester, and subsequent hydrogenolysis of the O-benzyl groups, furnished the target compound 1-O-(1,2-dipalmitoyl-sn-glycero-3-phosphoryl)-2,6-di-O-α-D-mannopyranosyl-D-myo-inositol.     

A stannylene strategy for regioselective acylation and phosphorylation of 1,2-cyclohexylidene-myo-inositol. Its convenient resolution and phosphatidylinositol synthesis

The bis(dibutylstannylene) derivative of 1,2-cyclohexylidene-myo-inositol reacted with (S)-O-acetylmandeloyl chloride and diphosphate tetraesters to give 3,6-dimandelate and 3-phosphate, respectively. Using the stannylene methodology for the optical resolution and regioselective phosphorylation of the ketal, a concise synthesis of phosphatidylinositol with the natural configuration was accomplished.     

Regioselective phosphorylation of vicinal 3,4-hydroxy myo-inositol derivative promoted practical synthesis of d-PtdIns(4,5)P2 and d-Ins(1,4,5)P3

The reactivity of 3 and 4-OH in 3,4-diol myo-inositol derivatives were observed through the phosphorylation, acylation and silylation. The results indicated that 3-OH is much more reactive than 4-OH, giving regiospecifically 3-mono-functionalized products. This investigation provided a concise methodology for the synthesis of natural d-form of PtdIns(4,5)P2 and d-Ins(1,4,5)P3 from l-1,2-O-cyclohexylidene-3,4-O-(tetraisopropyl disiloxane-1,3-diyl)-myo-inositol.     

Efficient syntheses of optically pure chiro- and allo-inositol derivatives, azidocyclitols and aminocyclitols from myo-inositol

Efficient routes for the syntheses of optically pure and hitherto unknown l-chiro- and d-allo-inositol derivatives, azido- and aminocyclitols of l-chiro-configuration, diazido- and diaminocyclitols of d-allo-configuration from economically viable myo-inositol are described. These routes provide access to synthetically flexible 1,2:4,5-di-O-isopropylidene-chiro-inositol and 1,6:3,4-di-O-isopropylidene-allo-inositol, which are otherwise difficult to synthesize directly from their parent inositols. A one pot methodology that allows rapid access to both chiro- and allo-inositol derivatives has also been developed. Investigations on the glycosidase inhibitory properties of these novel azido- and amino-inositols unraveled the potentials of these classes of compounds as novel class of glycosidase inhibitors. Both d and l forms of these cyclitols could be synthesized from myo-inositol in gram scales and hence by exploiting the difference in reactivities of cis- and trans-ketals, a variety of protected derivatives, which are useful for the synthesis of unnatural phosphoinositols and natural products, can be synthesized.     

Large scale synthesis of the acetonides of l-glucuronolactone and of l-glucose: easy access to l-sugar chirons

1,2-O-Isopropylidene-α-l-glucurono-3,6-lactone may be synthesized on a 100-200 g scale from cheaply available d-glucoheptonolactone in an overall yield of 94% in four steps via l-glucuronolactone. Subsequent elaboration to l-glucose, diacetone-l-glucose (1,2:5,6-di-O-isopropylidene-α-l-glucofuranose), and monoacetone-l-glucose (1,2-O-isopropylidene-α-l-glucofuranose) allows easy access to a range of l-sugar chirons.     

Efficient regioselective protection of myo-inositol via facile protecting group migration

A cis-1,2-cyclohexanediol, 1,4,5,6-tetra-O-benzyl-myo-inositol, was selectively protected at the axial C2-hydroxyl via acid-mediated rearrangement of the corresponding 1,2-orthoacetate, or via the base-induced migration of a protecting group that had previously been easily installed with complete regioselectivity at the adjacent equatorial hydroxyl. Esters 4a-6a were synthesized in high yields (75-82%) while sulfonate 7a and silyl ether 8a were obtained in 85 and 31% yields, respectively. The migration of the esters induced by DBU results in equilibrium between regioisomers favouring the C2 protected isomer, but NaH induced migration of sulfonyl and silyl groups results in complete migration from equatorial to axial hydroxyl groups.     

Regioselective etherification of l,2-O-isopropylidene-4,6-di-O-benzyl myo-inositol

During the etherification of 1,2-O-isopropylidene-4,6-di-O-benzyl myo-inositol, the specific regioselectivity on 3- or 5-hydroxyl group was showed to be determined by the nature of the O- alkylating agents used. As demonstrated by MM and MNDO calculation, the regioselectivity of the reaction mentioned can be rationalized by steric and/or electronic effect.     

Regioselective O-acylation of myo-inositol 1,3,5-orthoesters: dependence of regioselectivity on the stoichiometry of the base

A metal mediated unusual 1-3 acyl migration from C4-O to C2-OH of myo-inositol 1,3,5-orthoformate was observed during the alkylation of racemic 4-O-benzoyl-myo-inositol 1,3,5-orthoformate. This has been exploited for the selective esterification of either the C4(6)-OH or the C2-OH of myo-inositol by varying the amount of the base used. While the use of 1 equiv of the base (sodium hydride or potassium tert-butoxide) for the acylation of myo-inositol orthoesters gives the corresponding C4-ester exclusively, the use of two or more equivalents of base for the same reaction gives the C2-ester exclusively. The relatively higher stability of the alkoxide of racemic 2-O-acyl-myo-inositol 1,3,5-orthoester as compared to the alkoxide of 4-O-acyl-myo-inositol 1,3,5-orthoester is suggested to be responsible for the observed isomerization.     

Sulfonate protecting groups. Synthesis of O- and C-methylated inositols: d- and l-ononitol, d- and l-laminitol, mytilitol and scyllo-inositol methyl ether

Syntheses of d- and l-ononitol, d- and l-laminitol, mytilitol and scyllo-inositol methyl ether starting from myo-inositol are described. One or two of the myo-inositol 1,3,5-orthoformate hydroxyl groups were protected as tosylates. These mono or ditosylates served as key intermediates for the preparation of O- and C-methyl inositols. Racemic 2,4-di-O-tosyl-myo-inositol 1,3,5-orthoformate was resolved as its diastereomeric camphanates. Use of sulfonate groups for the protection of inositol hydroxyl groups resulted in substantial improvement in the overall yield of O- and C-methyl inositols.     

Thermal epimerization of inositol 1,3-benzylidene acetals in the molten state

1,3-O-Benzylidene-2,4,5,6-tetra-O-substituted-myo-inositol derivatives obtained by the DIBAL-H reduction of the corresponding myo-inositol 1,3,5-orthobenzoate derivatives undergo epimerization at the acetal carbon on heating, in the molten state, just above their melting point. The same epimerization reaction does not proceed either in the crystalline state or in solution. DFT calculations suggest that the epimeric acetal obtained by this thermal process is relatively more stable than the starting acetal. Either of these acetals could not be obtained by the reaction of the corresponding inositol derived diol with benzaldehyde. These observations constitute a novel reaction solely in the molten state, which are rarely encountered in the literature. X-ray crystal structures of the epimeric acetals as well as their radical deoxygenation reaction are also reported.     

Stable axial-rich chair conformer of myo-inositol derivatives due to introduction of two adjacent bulky silyl protections

The ring-conformational change of myo-inositol derivatives by introducing two tert-butyldimethylsilyl, triisopropylsilyl, or tert-butyldiphenylsilyl groups into the 1,2-trans hydroxy groups--3,4- and 4,5-positions--were investigated. The cyclohexane cores of the 4,5-bis-O-silylated derivatives with tert-butyldiphenylsilyl or triisopropylsilyl groups were present in the axial-rich chair form.     

Synthese des substances de groupe sanguin—IV : Synthese du 2-acetamido-2-desoxy-4-O-[2-O-(α-l-fucopyranosyl)-β-d-galactopyranosyl]-d-glucopyranose,porteur de la specificite H

The synthesis of a H blood group specific trisaccharide was performed by using benzyl ethers as temporary blocking groups for hydroxylic functions. Benzyl 2-acetamido-3,6-di-O-benzyl-2-deoxy-α-d- glucopyranoside was glycosylated by 3,4,6-tri-O-benzyl-1,2-O-benzyl-1,2-O-(tert-butoxyethylidene)-α-d-galactopyranose; after O-deacetylation, glycosylation by 2,3,4-tri-O-benzyl-α-l-fucopyranosyl bromide, and hydrogenolysis, 2-acetamido-2-deoxy-4-O-[2-O-(α-l-fucopyranosyl)-β-d-galactopyranosyl]-d-glucopyranose is obtained.     

Inositol derived crown ethers: effect of auxiliary protecting groups and the relative orientation of crown ether oxygen atoms on their metal ion binding ability

The binding constants of crown ethers prepared from tetra-O-substituted myo- and scyllo-inositol derivatives and 2-O-substituted myo- and scyllo-inositol-1,3,5-orthoformates, with metal picrates show that the O-substituents and the relative orientation of the crown ether oxygen atoms contribute significantly to the binding of crown ethers with metal ions. In particular, the binding efficiency of myo-inositol derived crown ethers to silver and potassium ions could be enhanced by introducing benzyl ethers in the inositol ring. Hence binding efficacy and selectivity of metal ions to inositol derived crown ethers can be tuned by varying substituents on the myo-inositol ring and/or the relative orientation of crown ether oxygen atoms.     

Synthesis and epimerization of 10-N-(6-deoxy-1,2:3,4-di-O-isopropylidene-α-d-galactopyranos-6-yl)-(11aS)-pyrrolo[2,1-c][1,4]benzodiazepin-5,11-dione

The reaction of the 1,2:3,4-di-O-isopropylidene-6-O-tosyl-α-d-galactopyranose 2 with (11aS)-pyrrolo[2,1-c][1,4]benzodiazepin-5,11-dione 1, prepared from l-proline and isatoic anhydride, gave two products which were previously reported as conformational isomers. In this work, an X-ray crystallographic study showed these to be the diastereomeric pair (11aS)- and (11aR)-10-N-(6-deoxy-1,2:3,4-di-O-isopropylidene-α-d-galactopyranos-6-yl)-pyrrolo[2,1-c][1,4]benzodiazepin-5,11-diones as a consequence of C(11a) epimerization in the benzodiazepine moiety during glycosylation under basic reaction conditions. The hydrosolubility of the deprotected products were compared with those of the analogous benzodiazepine derivatives.     

An unusual twist conformation of 2-O-methyl-1,3,4,5-tetrakis-O-tert-butyldiphenylsilyl-myo-inositol

The ring conformation of 2-O-methyl-1,3,4,5-tetrakis-O-tert-butyldiphenylsilyl-myo-inositol was in a twist form both in solid state and in solution. This is the first observation of a stable twist conformer induced by the introduction of bulky silyl protecting groups.     

Synthesis of a dibenzylchitin-type polysaccharide by acid-catalyzed polymerization

This paper describes the polymerization of 2-methyl-(3,6-di-O-benzyl- 1,2-dideoxy-α-D -glucopyrano)-[2,1-d]-2-oxazoline ( 1 ) with an acid catalyst. The polymerization proceeds involving stereoregular glycosylation to give polysaccharide 2 . The polymer structure, 2-acetamido-3,6-di-O-benzyl-2-deoxy-(l→4)-β-D -glucopyranan was determined by means of ¹H NMR, ¹³C NMR, and IR spectra as well as elemental analysis. The molecular weight was at most 4900 (degree of polymerization ≈ 13).     

Chelation controlled regiospecific O-substitution of myo-inositol orthoesters: convenient access to orthogonally protected myo-inositol derivatives

A general method for the completely regioselective protection of the three secondary hydroxyl groups of orthoester derivatives of myo-inositol, utilizing the subtle differences in reactivity exhibited by its alkali metal alkoxides due to differences in their ability to form chelates, is described. This method provides convenient access to orthogonally protected myo-inositol derivatives. A comparison of the methylation of racemic 4-O-trityl-myo-inositol 1,3,5-orthoformate in the presence of sodium or lithium ions showed that stabilization of the C4-alkoxide by chelation with lithium overrides steric hindrance offered by the C6-axial substituent in deciding the regioselectivity during the nucleophilic O-substitution.