Alpha,omega-bis(quinquethienyl)alkanes as a pi-dimer model of polythiophene

[structure: see text] A series of the title dimeric quinquethiophenes linked with a di- to hexamethylene spacer was synthesized and examined as a pi-dimer model of polythiophene. Upon two-electron oxidation with iron(III) chloride in dichloromethane, they readily form intramolecular pi-dimer species, except for the dimethylene-linked dimer that cannot be bent into a pi-stacked structure.     

Terminally Bifurcated Tetraaurio-alpha,omega-bis(sulfonium) Salts as Building Blocks for Auriophilicity-Determined Coordination Polymers

Treatment of alpha,omega-dithiols HS(CH(2))(n)()SH, n = 4 or 5, with tris[(triphenylphosphine)aurio]oxonium tetrafluoroborate affords the corresponding S,S,S',S'-tetrakis[(triphenylphosphine)aurio]-alpha,omega-alkanediylbis(sulfonium) bis(tetrafluoroborates) of the type {[(Ph(3)P)Au](2)S(CH(2))(n)()S[Au(PPh(3))](2)}(2+)2BF(4)(-). The crystal structure of the species with n = 5 has been determined by single crystal X-ray diffraction studies. In the lattice the unfolded dications are linked into chains through short double Au-Au contacts between the terminal bifurcated diauriosulfonium centers. The analogous reactions with (racemic) 1,2-dithioglycerol and 1,2,3-trithioglycerol also give tri- and tetranuclear complexes with a varying distribution of the metal atoms over the chalcogen(ium) centers. As again demonstrated in a single crystal X-ray diffraction study, the dications {HOCH(2)HCS[(Ph(3)P)Au](2)CH(2)S[Au(PPh(3))](2)}(2+) of the dithioglycerol compound form only dimers through auriophilicity-determined pairing of the bifurcated ends, while the open ends are shielded by the dangling hydroxyl group. The trinuclear complex of 1,2-dithioglycerol is fluxional in solution; the crystal structure has not been determined but is expected to be similar to that derived for the analogous dithioglycol complex. The tetranuclear, trithioglycerol-based dications of {[(Ph(3)P)Au]SCH(2)CHS[Au(PPh(3))]CH(2)S[Au(PPh(3))](2)}(+)BF(4)(-) are isolated in the lattice and feature an unsymmetrical complexation, which is an extension of the structure of the trinuclear dithioglycol analogue {(CH(2)S)(2)[Au(PPh(3))](3)}(+) with its strong intramolecular Au-Au contacts. A similar structure is proposed for the monocation {CH(2)(CH(2)S)(2)[Au(PPh(3))](3)}(+) obtained from propane-1,3-dithiol. The structures of these cations are also fluxional in solution, however, as shown by variable-temperature NMR studies.     

Alkanediyl-alpha,omega-bis(dimethylalkylammonium bromide) surfactants: II. Krafft temperature and melting temperature

The melting temperature T(M) of two series of dimeric (gemini) surfactants, the alkanediyl-alpha,omega-bis(dodecyl and hexadecyl dimethylammonium bromide), referred to as 12-s-12 and 16-s-16, respectively (s = carbon number of the alkanediyl spacer), and the Krafft temperature T(K) of 1 wt% aqueous solutions of these surfactants have been measured. The melting temperature of the solid surfactant increases with the carbon number m of the alkyl chain. For each surfactant series, T(M) goes through a maximum at s close to 5, irrespective of the value of m. For the 12-s-12 series, T(M) goes through a minimum at s = 10 to 12. At a constant value of s, the value of T(K) increases with m. The variations of T(M) and T(K) with s show some correlation, with T(K) decreasing when T(M) increases and vice versa. The results are discussed in relation to the solution properties of the investigated surfactants.     

General synthesis and aggregation behaviour of a series of single-chain 1,omega-bis(phosphocholines)

The synthesis and physicochemical characterisation of a series of polymethylene-1,omega-bis(phosphocholines) with even-numbered chain lengths between 22 and 32 carbon atoms is described. Two new synthetic strategies for the preparation of long-chain 1,omega-diols as hydrocarbon building blocks are presented. The temperature-dependent self-assembly of the single-chain bolaamphiphiles was investigated by cryo transmission electron microscopy (cryo-TEM), differential scanning calorimetry (DSC), and Fourier transform infrared spectroscopy (FTIR).     

Phosphorescent platinum(II) complexes derived from multifunctional chromophores: synthesis, structures, photophysics, and electroluminescence

The synthesis and structural, photophysical, electrochemical, and electroluminescent properties of a novel class of trifunctional Pt(II) cyclometalated complexes are reported in which the hole-transporting triarylamine, electron-transporting oxadiazole, and electroluminescent metal components are integrated into a single molecule. These neutral metal chelates display good thermal stability (>250 degrees C under N2) and morphological stability. All of them exhibit intense ligand-centered fluorescence and phosphorescence in fluid solutions at room temperature, but the emission spectra become largely dominated by triplet emission bands in CH2Cl2 glass at 77 K. Substituents with different electronic properties were introduced into the bipolar cyclometalating ligands to fine-tune the absorption and emissive characteristics of the compounds, and the results were correlated with theoretical calculations using density functional theory. A comparison of the photophysics and electrochemistry of our multifunctional systems to those only derived from each of the constituent components was also made and discussed. These Pt complexes can be vacuum-sublimed and applied as emissive dopants for the fabrication of vapor-deposited electrophosphorescent organic light-emitting devices (OLEDs), which generally exhibit good device performance with efficiencies up to 3.6%, 11.0 cd A-1, and 5.8 lm W-1. While the electroluminescence energy resembles that recorded in fluid solutions for these Pt emitters, these monochromatic OLEDs can emit tunable colors by varying the aryl ring substituents and the level of doping. Saliently, single dopant white-light electroluminescence, triggered by the simultaneous fluorescence/phosphorescence emission of the metal complexes and a variation of applied driving voltages, has also been realized based on some of these multifunctional complexes with peak electrophosphorescence efficiencies of 6.8 cd A-1 and 2.6%.     

Fabrication of steady junctions consisting of alpha,omega-bis(thioacetate) oligo(p-phenylene vinylene)s in nanogap electrodes

For obtaining molecular devices using metal-molecule-metal junctions, it is necessary to fabricate a steady conductive bridge-structure; that is stable chemical bonds need to be established from a single conductive molecule to two facing electrodes. In the present paper, we show that the steadiness of a conductive bridge-structure depends on the molecular structure of the bridge molecule for nanogap junctions using three types of modified oligo(phenylene vinylene)s (OPVs): alpha,omega-bis(thioacetate) oligo(phenylene vinylene) (OPV1), alpha,omega-bis(methylthioacetate) oligo(phenylene vinylene) (OPV2), and OPV2 consisting of ethoxy side chains (OPV3). We examined the change in resistance between the molecule-bridged junction and a bare junction in each of the experimental Au-OPV-Au junctions to confirm whether molecules formed steady bridges. Herein, the outcomes of whether molecules formed steady bridges were defined in terms of three types of result; successful, possible and failure. We define the ratio of the number of successful junctions to the total number of experimental junctions as successful rate. A 60% successful rate for OPV3 was higher than for the other two molecules whose successful rates were estimated to be approximately 10%. We propose that conjugated molecules consisting of methylthioacetate termini and short alkoxy side chains are well suited for fabricating a steady conductive bridge-structure between two facing electrodes.     

Dielectric study of the liquid crystalline dimer alpha, omega-bis(4'-cyanobiphenyl-4-yloxy)decane

The dielectric properties of a nematogenic dimer alpha,omega-bis(4-cyanobiphenyl-4-yloxy)decane in the nematic and isotropic phases have been investigated in the frequency range between 100 Hz and 13 MHz. It was found that the compound is characterized by a positive dielectric anisotropy. The dielectric constant in the nematic phase is lower than that in the isotropic phase, which suggests variation in the conformational distribution of the dimer after the phase transition. Only one relaxation process, both in the nematic and isotropic phases, has been observed in the frequency range used: the relaxation frequency has been found to take values between 2 and 4 MHz, depending on the temperature.     

Structural effects on surface and micellar properties of alkanediyl-alpha, omega-bis(sodium N-acyl-beta-alaninate) gemini surfactants

A study of the equilibrium surface properties (in water and in the presence of 0.01 M NaCl) of a novel series of anionic gemini surfactants, alkanediyl-alpha,omega-bis(sodium N-acyl-beta-alaninates), is described. Parameters studied include cmc (critical micelle concentration), C20 (required to reduce the surface tension of the solvent by 20 mN/m), gamma(cmc) (the surface tension at the cmc), Gamma(max) (the maximum surface excess concentration at the air/aqueous solution interface), Amin (the minimum area per surfactant molecule at the air/water interface), and the cmc/C20 ratio (a measure of the tendency to form micelles relative to adsorb at the air/water interface). The geminis with a spacer consisting of two methylene groups show premicellar self-aggregation, both in water and in 0.01 M NaCl, when the N-acyl group contains more than 12 carbon atoms; geminis with a spacer consisting of four methylene groups show no premicellar aggregation even when the N-acyl group contains 16 carbon atoms. For the acyl chain lengths where premicellar aggregation does not occur, the values of the cmc of the geminis with a two-methylene spacer are lower than those for the corresponding analogous geminis with a four-methylene spacer. The premicellar formation for the geminis with a two-methylene spacer is due to the short-chain linkage. The geminis show little or no break in their specific conductance-surfactant molar concentration plots and an increase in the pH at the cmc. This is attributed to protonation of the carboxylate group and strong Na+ release during micellization.     

Sustainable poly(ether amide)s from lignin-derived precursors

In recent years, there have been concerted efforts to replace petrochemical products with those from renewable sources due to the unsustainability of petroleum feedstock, and the continued volatility in the price. This work describes the synthesis and thermal properties of two new lignin-derived poly(ether-amide)s as alternative thermoplastics to petroleum-based commodities. Poly-4-(2-aminoethoxy)benzoate (PEAB) and poly-4-(2-aminoethoxy)-3-methoxybenzoate (PEAV) are synthesized by a melt polycondensation and characterized by ¹H NMR spectroscopy and thermal analysis. The number average molecular weight (M_n) of the polymers are estimated from the ¹H NMR spectroscopy analysis, and were shown to be 4100 and 12,000 g/mol for PEAB and PEAV respectively. The PEAB had a higher decomposition temperature (T_d) as well as glass transition temperature (T_g) compared to PEAV; albeit, with a lower molecular weight. The polymers’ T_d were in the range of 330 °C–380 °C and the T_g were between 100 °C and 120 °C. The thermal properties of the polymers are in the desirable range for thermoplastic materials used in the packaging, storage, and coating industries. Furthermore, the polymers are susceptible to degradation under acidic conditions in a short period; a property that is highly desirable for degradable polymers. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2154–2160     

Cytotoxic gold(I)-bearing dendrimers from alkyne precursors

A series of four dendrimers end-functionalized with gold(I) has been prepared from alkyne-terminated precursors and (tricyclohexylphosphine)gold(I) azide. Isolated yields range from 84-89%, based on gold. The first-generation dendrimer is cytotoxic toward 3T3 mouse fibroblast cells. Apoptosis ensues within 6 h of treatment with gold(I).     

Adsorption of hexyl-alpha,omega-bis(dodecyldimethylammonium bromide) gemini surfactant on silica and its effect on wettability

The adsorption of hexyl-alpha,omega-bis(dodecyldimethylammonium bromide) (C(12)C(6)C(12)Br(2)) gemini surfactant on silica and its effect on wettability have been studied. The structure of the adsorbed aggregates experiences an evolving course with the increase of C(12)C(6)C(12)Br(2) concentration. It is from no aggregates to circular islands, then to semicontinuous islands, and at last to the two-bilayer structure. No matter what kind of aggregates are in existence, their thickness values are to be the same 3.3+/-0.3 nm. The fraction of silica surface covered by the surfactant aggregates also varies from nearly zero at 0.05 mM to approximately 0.92 at 5.0 mM. The variation of contact angle against C(12)C(6)C(12)Br(2) concentration shows two distinct regions. The upward shift indicates that the surfactant molecules are adsorbed with their hydrophobic tails facing air upon increasing concentration, while the downward shift reveals that the surfactant aggregates are in existence with the hydrophilic headgroups facing air. IR spectra suggest that two different courses are involved with the increase of the surfactant concentration. One possible course is that the surfactant tails pack more closely and orderly, and the other may be that the spacer changes from stretched profile to bended conformation upon increasing the surfactant concentration.     

Crystal structure and packing analysis of the liquid crystal dimer alpha,omega-bis(4-cyanobiphenyl-4-yloxy)octane

The crystal structure of the liquid crystal dimer α,ω-bis(4-cyanobiphenyl-4'-yloxy)octane has been determined from diffraction data obtained with synchrotron radiation. The structure is triclinic, with the space group P-1 with Z = 2 and the unit cell parameters are a= 7.135(5) Å, b= 12.811(5) Å, c= 15.639(5) Å, α= 75.800(5)°, β= 84.690(5)°, γ= 77.930(5)°. The flexible spacer linking the mesogenic groups is in the all-trans-conformation. Although the molecule has a potential centre of symmetry, it occupies a general position in the cell; this unusual behaviour has been investigated with the aid of a theoretical evaluation of the packing energy.     

Vinyl and carbene ruthenium(II) complexes from hydridoruthenium(II) precursors

The reactions of the hydrido compounds [RuHCl(CO)(L)2][L = PiPr3 (1), PCy3 (2)] with HC(triple bond)CR (R = H, Ph, tBu) afforded by insertion of the alkyne into the Ru-H bond the corresponding vinyl complexes [RuCl(CHCHR)(CO)(L)2], 3-8, which upon protonation with HBF4 gave the cationic five-coordinated ruthenium carbenes [RuCl(CHCH2R)(CO)(L)2]BF4, 9-14. Subsequent reactions of the carbene complexes with PR3(R = Me, iPr) and CH3CN led either to deprotonation and re-generation of the vinyl compounds or to cleavage of the ruthenium-carbene bond and the formation of the six-coordinated complexes [RuCl(CO)(CH3CN)2(PiPr3)2]BF4, 17, and [RuH(CO)(CH3CN)2(PiPr3)2]X, 18a,b. The acetato derivative [RuH(2-O2CCH3)(CO)(PCy3)2], 19, also reacted with acetylene and phenylacetylene by insertion to yield the related vinyl complexes [Ru(CHCHR)(kappa2-O2CCH3)(CO)(PCy3)2], 20, 21, of which that with R = H was protonated with HBF4 to yield the corresponding cationic ruthenium carbene 22. With [RuHCl(H2)(PCy3)2], 25, as the starting material, the five-coordinated chloro(hydrido)ruthenium(II) compounds [RuHCl(PCy3)(dppf)], 26(dppf = [Fe(eta5-C5H4PPh2)2]), [RuHCl[Sb(CH2Ph)3](PCy3)2], 27, and [RuHCl(CH3CN)(PCy3)2], 30, were prepared. The reactions of 27 with HCCR (R = H, Ph) gave the hydrido(vinylidene) complexes [RuHCl(CCHR)(PCy3)2], 28 and 29, whereas treatment of 30 with HC(triple bond)CPh afforded the vinyl compound [RuCl(CHCHPh)(CH3CN)(PCy3)2], 31. The molecular structures of 11(R = tBu, L = PiPr3) and 26 were determined crystallographically.     

Amino(oligo)thiophene-based environmentally sensitive biomembrane chromophores

There is a growing need for cellular imaging with fluorescent probes that emit at longer wavelengths to minimize the effects of absorption, autofluorescence, and scattering from biological tissue. In this paper a series of new environmentally sensitive hemicyanine dyes featuring amino(oligo)thiophene donors have been synthesized via aldol condensation between a 4-methylpyridinium salt and various amino(oligo)thiophene carboxaldehydes, which were, in turn, obtained from amination of bromo(oligo)thiophene carboxaldehyde. Side chains on these fluorophores impart a strong affinity for biological membranes. Compared with benzene analogues, these thiophene fluorophores show significant red shift in the absorption and emission spectra, offering compact red and near-infrared emitting fluorophores. More importantly, both the fluorescence quantum yields and the emission peaks are very sensitive to various environmental factors such as solvent polarity or viscosity, membrane potential, and membrane composition. These chromophores also exhibit strong nonlinear optical properties, including two-photon fluorescence and second harmonic generation, which are themselves environmentally sensitive. The combination of long wavelength fluorescence and nonlinear optical properties make these chromophores very suitable for applications that require sensing or imaging deep inside tissues.     

Three-dimensional nonlinear optical chromophores based on metal-to-ligand charge-transfer from ruthenium(II) or iron(II) centers

In this article, we describe a series of new complex salts in which electron-rich transition-metal centers are coordinated to three electron-accepting N-methyl/aryl-2,2':4,4' ':4',4' '-quaterpyridinium ligands. These complexes contain either Ru(II) or Fe(II) ions and have been characterized by using various techniques, including electronic absorption spectroscopy and cyclic voltammetry. Molecular quadratic nonlinear optical (NLO) responses beta have been determined by using hyper-Rayleigh scattering at 800 nm and also via Stark (electroabsorption) spectroscopic studies on the intense, visible d --> pi* metal-to-ligand charge-transfer bands. The latter experiments reveal that these putatively octupolar D(3) chromophores exhibit two substantial components of the beta tensor which are associated with transitions to dipolar excited states. Computations involving time-dependent density-functional theory and the finite field method serve to further illuminate the electronic structures and associated linear and NLO properties of the new chromophoric salts.     

Synthesis of heteroleptic bis(diimine)carbonylchlororuthenium(II) complexes from photodecarbonylated precursors

The reactions of bidentate diimine ligands (L2) with binuclear [Ru(L1)(CO)Cl2]2 complexes [L1 not equal to L2 = 2,2'-bipyridine (bpy), 4,4'-dimethyl-2,2'-bipyridine (4,4'-Me2bpy), 5,5'-dimethyl-2,2'-bipyridine (5,5'-Me2bpy), 1,10-phenanthroline (phen), 4,7-dimethyl-1,10-phenanthroline (4,7-Me2phen), 5,6-dimethyl-1,10-phenanthroline (5,6-Me2phen), di(2-pyridyl)ketone (dpk), di(2-pyridyl)amine (dpa)] result in cleavage of the dichloride bridge and the formation of cationic [Ru(L1)(L2)(CO)Cl]+ complexes. In addition to spectroscopic characterization, the structures of the [Ru(bpy)(phen)(CO)Cl]+, [Ru(4,4'-Me2bpy)(5,6-Me2phen)(CO)Cl]+ (as two polymorphs), [Ru(4,4'-Me2bpy)(4,7-Me2phen)(CO)Cl]+, [Ru(bpy)(dpa)(CO)Cl]+, [Ru(5,5'-Me2bpy)(dpa)(CO)Cl]+, [Ru(bpy)(dpk)(CO)Cl]+, and [Ru(4,4'-Me2bpy)(dpk)(CO)Cl]+ cations were confirmed by single crystal X-ray diffraction studies. In each case, the structurally characterized complex had the carbonyl ligand trans to a nitrogen from the incoming diimine ligand, these complexes corresponding to the main isomers isolated from the reaction mixtures. The synthesis of [Ru(4,4'-Me2bpy)(5,6-Me2bpy)(CO)(NO3)]+ from [Ru(4,4'-Me2bpy)(5,6-Me2bpy)(CO)Cl]+ and AgNO3 demonstrates that exchange of the chloro ligand can be achieved.     

Aggregation Properties of Sodium Hyaluronate with Alkanediyl-alpha,omega-bis(dimethylalkylammonium Bromide) Surfactants in Aqueous Sodium Chloride Solution

Lysine, which is an amino acid with a basic side group, is present in biological fluids and its role in the biological calcification process was investigated. It was found to inhibit the crystal growth rate of hydroxyapatite (HAP), in solutions supersaturated only with respect to this calcium phosphate salt and this rate reduction was attributed to adsorption and further blocking of the active growth sites on the crystal surface. The crystallization kinetics were interpreted in terms of the Langmuir adsorption model. The apparent order of the crystallization reaction was found to be n=2, suggesting a surface diffusion controlled spiral growth mechanism. Kinetic results of HAP crystallization were obtained using the constant composition method where the concentration of the reactants is kept constant during the course of the crystal growth experiment. Copyright 2000 Academic Press.     

Two-dimensional, pyrazine-based nonlinear optical chromophores with ruthenium(II) ammine electron donors

Six new nonlinear optical (NLO) chromophores with pyrazinyl-pyridinium electron acceptors have been synthesized by complexing a known pro-ligand with electron donating {Ru(II)(NH(3))(5)}(2+) or trans-{Ru(II)(NH(3))(4)(py)}(2+) (py = pyridine) centers. These cationic complexes have been characterized as their PF(6)(-) salts by using various techniques including electronic absorption spectroscopy and cyclic voltammetry. The visible d → π* metal-to-ligand charge-transfer (MLCT) absorptions gain intensity on increasing the number of Ru(II) centers from one to two, but remain at constant energy. One or two Ru(III/II) redox processes are observed which are reversible, quasi-reversible, or irreversible, while all of the ligand-based reductions are irreversible. Molecular first hyperpolarizabilities β have been determined by using hyper-Rayleigh scattering (HRS) at 1064 nm, and depolarization studies show that the NLO responses of the symmetric species are strongly two-dimensional (2D) in character, with dominant "off-diagonal" β(zyy) components. Stark (electroabsorption) spectroscopic measurements on the MLCT bands also allow the indirect determination of estimated static first hyperpolarizabilities β(0). Both the HRS and the Stark-derived β(0) values increase on moving from mono- to bimetallic complexes, and substantial enhancements in NLO response are achieved when compared with one-dimensional (1D) and 2D monometallic Ru(II) ammine complexes reported previously.     

Bacteriorhodopsin analogs from diphenylpolyene chromophores

Chromophore-modified bacteriorhodopsin (bR) analogs are prepared, to study the nature of chromophore-protein interaction as well as to develop new bR analogs that can find applications as photoactive element in molecular electronic devices. This article describes the preparation and characterization of hitherto unknown bR analogs based on diphenylpolyene chromophores. Diphenylpolyene compounds, namely, 4-[(E)-2-phenylvinyl]benzaldehyde (1), 3-methyl-5-[4-[(E)-2-phenylvinyl]phenyl]penta-2E,4E-dienal (2), 4-[4-phenylbuta-1E,3E-dienyl]benzaldehyde (3) and 3-methyl-5-[4-[4-phenylbuta-lE,3E-dienyl]phenyl]penta-2E,4E-dienal (4), have been synthesized, and their interaction with bacterioopsin (bOP) has been studied. Whereas aldehydes 2 and 4 interact with bOP and yield bR analogs bR-2 and bR-4, aldehydes 1 and 3 do not yield any pigment. Analogs bR-2 and bR-4 have been characterized for their opsin shift, competitive binding, photochemical properties and fluorescence spectral behavior.