Visible‐Light‐Driven Hydrogen Evolution Using Planarized Conjugated Polymer Photocatalysts

Linear poly(p‐phenylene)s are modestly active UV photocatalysts for hydrogen production in the presence of a sacrificial electron donor. Introduction of planarized fluorene, carbazole, dibenzo[b,d]thiophene or dibenzo[b,d]thiophene sulfone units greatly enhances the H₂ evolution rate. The most active dibenzo[b,d]thiophene sulfone co‐polymer has a UV photocatalytic activity that rivals TiO₂, but is much more active under visible light. The dibenzo[b,d]thiophene sulfone co‐polymer has an apparent quantum yield of 2.3 % at 420 nm, as compared to 0.1 % for platinized commercial pristine carbon nitride.     

Efficient Visible‐Light‐Driven Z‐Scheme Overall Water Splitting Using a MgTa2O6−xNy /TaON Heterostructure Photocatalyst for H2 Evolution

An (oxy)nitride‐based heterostructure for powdered Z‐scheme overall water splitting is presented. Compared with the single MgTa₂O_6?xN_y or TaON photocatalyst, a MgTa₂O_6?xN_y /TaON heterostructure fabricated by a simple one‐pot nitridation route was demonstrated to effectively suppress the recombination of carriers by efficient spatial charge separation and decreased defect density. By employing Pt‐loaded MgTa₂O_6?xN_y /TaON as a H₂‐evolving photocatalyst, a Z‐scheme overall water splitting system with an apparent quantum efficiency (AQE) of 6.8 % at 420 nm was constructed (PtO_x‐WO₃ and IO₃^?/I^? pairs were used as an O₂‐evolving photocatalyst and a redox mediator, respectively), the activity of which is circa 7 or 360 times of that using Pt‐TaON or Pt‐MgTa₂O_6?xN_y as a H₂‐evolving photocatalyst, respectively. To the best of our knowledge, this is the highest AQE among the powdered Z‐scheme overall water splitting systems ever reported.     

Sonochemical Synthesis of Ag/AgCl Nanocubes and Their Efficient Visible‐Light‐Driven Photocatalytic Performance

A novel one‐step sonochemical approach to synthesize a plasmonic photocatalyst of AgCl nanocubes (ca. 115 nm in edge length) with a small amount of Ag metal species is presented. The nanoscale Ag/AgCl hybrid photocatalysts with cubic morphology are readily formed under ambient ultrasonic conditions and neither external heat treatment nor reducing agents are required. The size of the Ag/AgCl photocatalysts could be controlled by changing the concentrations of Ag⁺ ions and polyvinylpyrrolidone molecules in precursor solutions. The compositions, microstructures, influencing factors, and possible growth mechanism of the Ag/AgCl hybrid nanocubes were systematically investigated. The Ag/AgCl photocatalysts show excellent photocatalytic performance for degradation of various dye molecules under visible light.     

Alloyed (ZnS)x(CuInS2)1−x Semiconductor Nanorods: Synthesis,Bandgap Tuning and Photocatalytic Properties

Rod-like nanocrystals of the semiconductor alloy (ZnS)_x(CuInS₂)_1−x (ZCIS) have been colloidally prepared by using a one-pot non-injection-based synthetic strategy. The ZCIS nanorods crystallize in the hexagonal wurtzite structure and display preferential growth in the direction of the c axis. The bandgap of these quarternary alloyed nanorods can be conveniently tuned by varying the ratio of ZnS to CuInS₂. A non-linear relationship between the bandgap and the alloy composition is observed. The ZCIS nanorods are found to exhibit promising photocatalytic behaviour in visible-light-driven degradation of Rhodamine B.     

An Efficient RuII–RhIII–RuII Polypyridyl Photocatalyst for Visible‐Light‐Driven Hydrogen Production in Aqueous Solution

The development of multicomponent molecular systems for the photocatalytic reduction of water to hydrogen has experienced considerable growth since the end of the 1970s. Recently, with the aim of improving the efficiency of the catalysis, single‐component photocatalysts have been developed in which the photosensitizer is chemically coupled to the hydrogen‐evolving catalyst in the same molecule through a bridging ligand. Until now, none of these photocatalysts has operated efficiently in pure aqueous solution: a highly desirable medium for energy‐conversion applications. Herein, we introduce a new ruthenium–rhodium polypyridyl complex as the first efficient homogeneous photocatalyst for H₂ production in water with turnover numbers of several hundred. This study also demonstrates unambiguously that the catalytic performance of such systems linked through a nonconjugated bridge is significantly improved as compared to that of a mixture of the separate components.     

Visible‐Light‐Active Elemental Photocatalysts

Seeking visible‐light‐active photocatalysts for efficient solar‐energy conversion has become an intensifying endeavor worldwide. In this concept paper, general requirements for finding new visible‐light‐active photocatalysts are briefly introduced, and recent progress in exploring elemental photocatalysts for clean‐energy generation and environmental remediation are reviewed. Finally, opportunities and challenges facing elemental photocatalysts are discussed.     

Visible‐Light‐Induced Generation of H2 by Nanocomposites of Few‐Layer TiS2 and TaS2 with CdS Nanoparticles

Graphene analogues of TaS₂ and TiS₂ (3–4 layers), prepared by Li intercalation followed by exfoliation in water, were characterized. Nanocomposites of CdS with few‐layer TiS₂ and TaS₂ were employed for the visible‐light‐induced H₂ evolution reaction (HER). Benzyl alcohol was used as the sacrificial electron donor, which was oxidized to benzaldehyde during the reaction. Few‐layer TiS₂ is a semiconductor with a band gap of 0.7 eV, and its nanocomposite with CdS showed an activity of 1000 μmol h^?1 g^?1_. The nanocomposite of few‐layer TaS₂, in contrast, gave rise to higher activity of 2320 μmol h^?1 g^?1, which was attributed to the metallic nature of few‐layer TaS₂. The amount of hydrogen evolved after 20 and 16 h for the CdS/TiS₂ and CdS/TaS₂ nanocomposites was 14833 and 28132 μmol, respectively, with turnover frequencies of 0.24 and 0.57 h^?1, respectively.     

Plasmonic Nickel–TiO2 Heterostructures for Visible‐Light‐Driven Photochemical Reactions

Plasmon‐mediated carrier transfer (PMCT) at metal–semiconductor heterojunctions has been extensively exploited to drive photochemical reactions, offering intriguing opportunities for solar photocatalysis. However, to date, most studies have been conducted using noble metals. Inexpensive materials capable of generating and transferring hot carriers for photocatalysis via PMCT have been rarely explored. Here, we demonstrate that the plasmon excitation of nickel induces the transfer of both hot electrons and holes from Ni to TiO₂ in a rationally designed Ni–TiO₂ heterostructure. Furthermore, it is discovered that the transferred hot electrons either occupy oxygen vacancies (V_O) or produce Ti³⁺ on TiO₂, while the transferred hot holes are located on surface oxygens at TiO₂. Moreover, the transferred hot electrons are identified to play a primary role in driving the degradation of methylene blue (MB). Taken together, our results validate Ni as a promising low‐cost plasmonic material for prompting visible‐light photochemical reactions.     

Controllable Synthesis of Hexagonal WO3 Nanoplates for Efficient Visible‐Light‐Driven Photocatalytic Oxygen Production

Facilitating charge‐carrier separation and transfer is fundamentally important to improve the photocatalytic performance of semiconductor materials. Herein, two‐dimensional hexagonal WO₃ nanoplates were synthesized by a two‐step route: rapid evaporation and solid‐phase sintering. The as‐prepared WO₃ exhibits an enhanced activity of photocatalytic water oxidation compared to bulk monoclinic WO₃. The electron dynamics analysis reveals that a more efficient charge‐carrier separation in the former can be obtained, the origin of which can be attributed to an increased number of surface defects in hexagonal WO₃ nanoplates. This work not only presents a novel and simple method to produce two‐dimensional hexagonal WO₃ nanoplates, but also demonstrates that surface defects and two‐dimensional geometric structures can promote the charge separation, which may be extended to the design of other efficient photocatalysts.     

Black Phosphorus-Based Semiconductor Heterojunctions for Photocatalytic Water Splitting

Solar-to-hydrogen (H₂) conversion has been regarded as a sustainable and renewable technique to address aggravated environmental pollution and global energy crisis. The most critical aspect in this technology is to develop highly efficient and stable photocatalysts, especially metal-free photocatalysts. Recently, black phosphorus (BP), as a rising star 2D nanomaterial, has captured enormous attention in photocatalytic water splitting owing to its widespread optical absorption, adjustable direct band gap, and superior carrier migration characteristics. However, the rapid charge recombination of pristine BP has seriously limited its practical application as photocatalyst. The construction of BP-based semiconductor heterojunctions has been proven to be an effective strategy for enhancing the separation of photogenerated carriers. This Minireview attempts to summarize the recent progress in BP-based semiconductor heterojunctions for photocatalytic water splitting, including type-I and type-II heterojunctions, Z-Scheme systems, and multicomponent heterojunctions. Finally, a brief summary and perspective on the challenges and future directions in this field are also provided.     

Three‐Dimensional Ordered Assembly of Thin‐Shell Au/TiO2 Hollow Nanospheres for Enhanced Visible‐Light‐Driven Photocatalysis

An Au/TiO₂ nanostructure was constructed to obtain a highly efficient visible‐light‐driven photocatalyst. The design was based on a three‐dimensional ordered assembly of thin‐shell Au/TiO₂ hollow nanospheres (Au/TiO₂‐3 DHNSs). The designed photocatalysts exhibit not only a very high surface area but also photonic behavior and multiple light scattering, which significantly enhances visible‐light absorption. Thus Au/TiO₂‐3 DHNSs exhibit a visible‐light‐driven photocatalytic activity that is several times higher than conventional Au/TiO₂ nanopowders.     

Visible‐Light Photocatalytic Hydrogen Generation by Using Dye‐Sensitized Graphene Oxide as a Photocatalyst

Dye‐sensitized graphene oxide is able to generate hydrogen from water/methanol mixtures (80:20) by using visible or solar light. The most efficient photocatalyst tested contained a tris(2,2‐bipyridyl) ruthenium(II) complex incorporated in the interlayer spaces of a few layers of graphene oxide with a moderate degree of oxidation. The graphene oxide‐based photocatalyst does not contain noble metals and we have determined that it is two orders of magnitude more active than catalysts based on conventional titania.     

Visible‐Light‐Induced Photocatalytic Hydrogen Production over Binuclear RuII–Bipyridyl Dye‐Sensitized TiO2 without Noble Metal Loading

Highly efficient, visible light induced photocatalytic H₂ production was achieved over a TiO₂ system sensitized by binuclear Ru^II bipyridyl (bpy) complex [Ru₂(bpy)₄(BL)](ClO₄)₂ (BL=bridging ligand) without Pt loading, which is almost unaffected by pH in aqueous solution in the wide range from pH 5.00 to 10.50, although the dye molecules can only be loosely attached to TiO₂ due to the absence of terminal carboxyl groups. The photocatalyst shows remarkable long‐term stability and reproducibility of H₂ evolution even after exchanging the aqueous triethanolamine solution. The amount of H₂ evolved over 100 mg of photocatalyst in 27 h of irradiation corresponds to a turnover number of about 75 340, and the apparent quantum yields are estimated to be 16.8 and 7.3 % under 420 and 475 nm monochromatic light irradiation, respectively. A comparative study shows that the loosely attached dye [Ru₂(bpy)₄(BL)](ClO₄)₂ has higher photosensitization efficiency than tightly linked dyes with terminal carboxyl groups, such as [Ru₂(dcbpy)₄(BL)](ClO₄)₂ and N719. It can be rationalized by their different coordination, physicochemical, electron‐injection, and back‐transfer properties.     

A Covalent Organic Framework–Cadmium Sulfide Hybrid as a Prototype Photocatalyst for Visible‐Light‐Driven Hydrogen Production

CdS nanoparticles were deposited on a highly stable, two‐dimensional (2D) covalent organic framework (COF) matrix and the hybrid was tested for photocatalytic hydrogen production. The efficiency of CdS‐COF hybrid was investigated by varying the COF content. On the introduction of just 1 wt % of COF, a dramatic tenfold increase in the overall photocatalytic activity of the hybrid was observed. Among the various hybrids synthesized, that with 10 wt % COF, named CdS‐COF (90:10), was found to exhibit a steep H₂ production amounting to 3678 μmol h^?1 g^?1, which is significantly higher than that of bulk CdS particles (124 μmol h^?1 g^?1). The presence of a π‐conjugated backbone, high surface area, and occurrence of abundant 2D hetero‐interface highlight the usage of COF as an effective support for stabilizing the generated photoelectrons, thereby resulting in an efficient and high photocatalytic activity.