Synthesis,properties, and field effect transistor characteristics of new thiophene‐[1,2,5]thiadiazolo[3,4‐g]quinoxaline‐thiophene‐based conjugated polymers

Four new conjugated copolymers based on the moiety of bis(4‐hexylthiophen‐2‐yl)‐6,7‐diheptyl‐[1,2,5]thiadiazolo[3,4‐g]quinoxaline (BTHTQ) were synthesized and characterized, including poly(6,7‐diheptyl‐4,9‐bis(4‐hexylthiophen‐2‐yl)‐[1,2,5]thiadiazolo[3,4‐g]quinoxaline) (PBTHTQ), poly‐(6,7‐diheptyl‐4,9‐bis(4‐hexylthiophen‐2‐yl)‐[1,2,5]thiadiazolo‐[3,4‐g]quinoxaline‐alt‐2,5‐thiophene) (PTTHTQ), poly(6,7‐diheptyl‐4,9‐bis(4‐hexylthiophen‐2‐yl) [1,2,5]‐thiadiazolo‐[3,4‐g]quinoxaline‐alt‐9,9‐dioctyl‐2,7‐fluore‐ne) (PFBTHTQ), and poly(6,7‐diheptyl‐4,9‐bis(4‐hexylthiophen‐2‐yl)‐[1,2,5]thiadiazolo[3,4‐g]quinoxaline‐alt‐1,4‐bis(decyloxy)phenylene) (PPBTHTQ). The λ_max of PBTHTQ, PTTHTQ, PFBTHTQ, and PPBTHTP thin films was shown at 780, 876, 734, and 710 nm, respectively, with the corresponding optical band gaps (E) of 1.31, 1.05, 1.40, and 1.43 eV. The relatively small band gaps of the synthesized polymers suggested the significance of intramolecular charge transfer between the donor and TQ moiety. The estimated hole mobilities of PBTHTQ, PTTHTQ, and PFBTHTQ‐based field effect transistor devices using CHCl₃ solvent were 8.5 × 10^?5, 8.5 × 10^?4, and 2.8 × 10^?5 cm² V^?1 s^?1, respectively, but significantly enhanced to 1.6 × 10^?4, 3.8 × 10^?3, and 1.5 × 10^?4 cm² V^?1 s^?1 using high boiling point solvent of chlorobenzene (CB). The higher hole mobility of PTTHTQ than the other two copolymers was attributed from its smaller band gap or ordered morphology [wormlike (chloroform) or needle‐like (CB)]. The characteristics of small band gap and high mobility suggest the potential applications of the BTHTQ‐based conjugated copolymers in electronic and optoelectronic devices. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6305–6316, 2008     

Bis(4,4′‐dimethyl‐2,2′‐bipyridine) ruthenium (II) Complexes Containing 2‐Arylimidazo‐ [4,5‐f] [1,10] phenanthroline: Syntheses,Characterization and Third‐order Nonlinear Optical Properties

Four novel mononuclear ruthenium(II) complexes [Ru(dmb)₂L]²⁺ [dmb = 4,4′‐dimethyl‐2,2′‐bipyridine, L = imidazo‐[4,5‐f][1,10]phenanthroline (IP), 2‐phenylimidazo‐[4,5‐f][1,10]phenanthroline (PIP), 2‐(4′‐hydroxyphenyl)imidazo‐[4,5‐f] [1,10] phenanthroline (HOP), 2‐(4′‐dimethylaminophenyl) imidazo‐[4, 5‐f] [1,10] phenanthroline (DMNP)] were synthesized and characterized by ES‐MS, ¹H NMR, UV‐vis and electrochemistry. The nonlinear optical properties of the ruthenium(II) complexes were investigated by Z‐scan techniques with 12 ns laser pulse at 540 nm, and all of them exhibit both nonlinear optical (NLO) absorption and self‐defocusing effect. The corresponding effective NLO susceptibility |x³| of the complexes is in the range of 2.68 × 10^?12‐4.57 × 10^?12 esu.     

Synthesis of 1‐Methyl‐3‐aryl‐substituted Titanocene and Zirconocene Dichlorides and Crystal Structure of Bis[η5‐1‐methyl‐3‐(α, α‐dimethylbenzyl) cyclopentadienyl] titanium Dichloride

The syntheses of a series of l‐methyl‐3‐aryl‐substituted titanocene and zirconocene dichlorides are reported. These complexes are synthesized by the reaction of 2‐ and 3‐methyl‐6, 6‐dimethylfulvenes (1:4) with aryllithium, followed by the reaction with TiCl₄·2THF, ZrCl₄ and (CpTiCl₂)₂O respectively, to give complexes 1–5. The complex [η⁵‐1‐methyl‐3‐(α, α‐dimethylbenzyl) cyclopentadienyl] titanium dichloride has been studied by X‐ray diffraction. The red crystal of this complex is monoclinic, space group P2_t/C with unit cell parameters: a =6.973(6) × 10^?1 nm, b =36.91(2) × 10^?1 nm, c = 10.063(4) × 10^?1 nm, α=β= γ = 93.35(5)°, V = 2584(5) × 10^?3 nm³ and Z = 4. Refinement for 1004 observed reflections gives the final R of 0.088. There are four independent molecules per unit cell.     

Synthesis and Molecular Recognition of Water‐Soluble S6‐Corona[3]arene[3]pyridazines

We report the efficient and scalable synthesis and molecular‐recognition properties of novel and water‐soluble S₆‐corona[3]arene[3]pyridazines. The synthesis comprises a one‐pot nucleophilic aromatic substitution reaction between diesters of 2,5‐dimercaptoterephthalate and 3,6‐dichlorotetrazine followed by the inverse electron‐demand Diels–Alder reaction of the tetrazine moieties with an enamine and exhaustive saponification of esters. The resulting S₆‐corona[3]arene[3]pyridazines, which adopt a 1,3,5‐alternate conformation in the crystalline state, are able to selectively form stable 1:1 complexes with dicationic guest species in water with association constants ranging from (1.10±0.06)×10³ M ^?1 to (1.18±0.06)×10⁵ M ^?1. The easy availability, large cavity size, strong and selective binding power render the water‐soluble S₆‐corona[3]arene[3]pyridazines useful macrocyclic hosts in various disciplines of supramolecular chemistry.     

Synthesis of Indeno[2′,1′:5,6]pyrido[2,3‐d]pyrimidine Derivatives and Their Recognition Properties as New Type Anion Receptors

A new type anion receptors containing indeno[2′,1′:5,6]pyrido[2,3‐d]pyrimidine have been synthesized via three‐component reaction of aldehyde, 6‐aminopyrimidine‐2,4‐dione, and 1,3‐indanedione in aqueous media. The binding properties of the receptors with anions such as F^?, Cl^?, Br^?, AcO^?, HSO₄^?, and H₂PO₄^? have been investigated by UV–vis spectroscopy methods. The results have shown that receptors have good selectivity to F^? and AcO^?, and a 1:1 stoichiometry complex has been formed between compounds and anions.     

Diphosphapodanden, [12]‐, [15]‐ und [18]Diphosphacoronanden,Diphosphacryptand‐8 und Alkalimetall‐Komplexe

Diphosphapodands, [12]‐, [15]‐, and [18]Diphosphacoronands, Diphosphacryptand‐8, and Alkali‐Metal Complexes The cyclizing bis‐phosphonium‐salt formation of the open‐chain bis‐phosphine 17a (1,1,7,7‐tetrabenzyl〈P.O.P‐podand‐7〉) with diethylene glycol derived dibromide 13a yields the 12‐membered cyclic bis‐phosphonium salt 20 (4,4,10,10‐tetrabenzyl‐12〈O.P.O.P‐coronand‐4〉‐4,10‐diium dibromide) in yields as high as 50–60%. The 1,1,10,10‐tetrabenzyl〈P.O₂.P‐podand‐10〉 17b forms with 13a the 15‐membered cyclic bis‐phosphonium salt 21 (7,7,13,13‐tetrabenzyl‐15〈O₂.P.O.P‐coronand‐5〉‐7,13‐diium dibromide) with the same high yield. By quaternization of the bis‐phosphine 17b with triethylene glycol derived dibromide 13b , the 18‐membered 7,7,16,16‐tetrabenzyl‐18〈O₂.P.O₂.P‐coronand‐6〉‐7,16‐diium dibromide 24 is obtained in 50% yield, too. The Wittig reaction of the cyclic phosphonium salts with benzaldehyde yields the 12‐, 15‐, and 18‐membered cyclic bis‐benzylphosphine dioxides 9, 10 , and 11 as cis‐ and trans‐isomers beside trans‐stilbene. The 7,13‐dioxido‐7,13‐dibenzyl‐15〈O₂.P.O₂.P‐coronand‐5〉 10 forms a crystalline 1 : 1 Na‐complex 23 , which exists as a dimer. The structure of 23 was established by an X‐ray analysis and spectroscopic data. The 7,16‐dibenzyl‐18〈O₂.P.O₂.P‐coronand‐6〉 28 that is available by reduction of 11 with CeCl₃/LiAlH₄ reacts with triethylene glycol derived dibromide 13b under Ruggly Ziegler‐dilution conditions to give the bicyclic bis‐phosphonium salt 29 (1,10‐dibenzyl〈P[O₂]₃.P‐cryptand‐8〉‐1,10‐diium dibromide) in 18% yield. Again, by the Wittig procedure with benzaldehyde, the 7,16‐dioxido〈P[O₂]₃P‐cryptand‐8〉 12 is obtained as the first diphosphacryptand. The FD‐MS (CH₂Cl₂) of the cyclic bis‐phosphine dioxides 10 – 12 show that they exist as [2M+Na]⁺ complexes. The complex formation constants K_a of 9 – 11 with alkali‐metal cations are studied and compared with the complex formation of corresponding crown ethers.     

5,20‐Bis(ethoxycarbonyl)‐Substituted Antiaromatic [28]Hexaphyrin and Its Bis‐NiII and Bis‐CuII Complexes

5,20‐Bis(ethoxycarbonyl)‐[28]hexaphyrin was synthesized by acid catalyzed cross‐condensation of meso‐diaryl‐substituted tripyrrane and ethyl 2‐oxoacetate followed by subsequent oxidation. This hexaphyrin was found to be a stable 28π‐antiaromatic compound with a dumbbell‐like conformation. Upon oxidization with PbO₂, this [28]hexaphyrin was converted into an aromatic [26]hexaphyrin with a rectangular shape bearing two ester groups at the edge side. The [28]hexaphyrin can incorporate two Ni^II or Cu^II metals by using the ester carbonyl groups and three pyrrolic nitrogen atoms to give bis‐Ni^II and bis‐Cu^II complexes with essentially the same dumbbell‐like structure. The antiaromatic properties of the [28]hexaphyrin and its metal complexes have been well characterized.     

Guest‐, Light‐ and Thermally‐Modulated Spin Crossover in [FeII2] Supramolecular Helicates

A new bis(pyrazolylpyridine) ligand (H₂L) has been prepared to form functional [Fe₂(H₂L)₃]⁴⁺ metallohelicates. Changes to the synthesis yield six derivatives, X@[Fe₂(H₂L)₃]X(PF₆)₂?xCH₃OH ( 1 , x=5.7 and X=Cl; 2 , x=4 and X=Br), X@[Fe₂(H₂L)₃]X(PF₆)₂?yCH₃OH?H₂O ( 1 a , y=3 and X=Cl; 2 a , y=1 and X=Br) and X@[Fe₂(H₂L)₃](I₃)₂?3 Et₂O ( 1 b , X=Cl; 2 b , X=Br). Their structure and functional properties are described in detail by single‐crystal X‐ray diffraction experiments at several temperatures. Helicates 1 a and 2 a are obtained from 1 and 2 , respectively, by a single‐crystal‐to‐single‐crystal mechanism. The three possible magnetic states, [LS–LS], [LS–HS], and [HS–HS] can be accessed over large temperature ranges as a result of the structural nonequivalence of the Fe^II centers. The nature of the guest (Cl^? vs. Br^?) shifts the spin crossover (SCO) temperature by roughly 40 K. Also, metastable [LS–HS] or [HS–HS] states are generated through irradiation. All helicates (X@[Fe₂(H₂L)₃])³⁺ persist in solution.     

Complexation Properties of N,N′,N″,N′′′‐[1,4,7,10‐Tetraazacyclododecane‐1,4,7,10‐tetrayltetrakis(1‐oxoethane‐2,1‐diyl)]tetrakis[glycine] (H4dotagl). Equilibrium,Kinetic, and Relaxation Behavior of the Lanthanide(III) Complexes

Eu³⁺, Dy³⁺, and Yb³⁺ complexes of the dota‐derived tetramide N,N′,N″,N′′′‐[1,4,7,10‐tetraazacyclododecane‐1,4,7,10‐tetrayltetrakis(1‐oxoethane‐2,1‐diyl)]tetrakis[glycine] (H₄dotagl) are potential CEST contrast agents in MRI. In the [Ln(dotagl)] complexes, the Ln³⁺ ion is in the cage formed by the four ring N‐atoms and the amide O‐atom donor atoms, and a H₂O molecule occupies the ninth coordination site. The stability constants of the [Ln(dotagl)] complexes are ca. 10 orders of magnitude lower than those of the [Ln(dota)] analogues (H₄dota=1,4,7,10‐tetraazacyclododecane‐1,4,7,10‐tetraacetic acid). The free carboxylate groups in [Ln(dotagl)] are protonated in the pH range 1–5, resulting in mono‐, di‐, tri‐, and tetraprotonated species. Complexes with divalent metals (Mg²⁺, Ca²⁺, and Cu²⁺) are also of relatively low stability. At pH>8, Cu²⁺ forms a hydroxo complex; however, the amide H‐atom(s) does not dissociate due to the absence of anchor N‐atom(s), which is the result of the rigid structure of the ring. The relaxivities of [Gd(dotagl)] decrease from 10 to 25°, then increase between 30–50°. This unusual trend is interpreted with the low H₂O‐exchange rate. The [Ln(dotagl)] complexes form slowly, via the equilibrium formation of a monoprotonated intermediate, which deprotonates and rearranges to the product in a slow, OH^?‐catalyzed reaction. The formation rates are lower than those for the corresponding Ln(dota) complexes. The dissociation rate of [Eu(dotagl)] is directly proportional to [H⁺] (0.1–1.0M HClO₄); the proton‐assisted dissociation rate is lower for [Eu(H₄dotagl)] (k₁=8.1?10^?6 M ^?1 s^?1) than for [Eu(dota)] (k₁=1.4?10^?5 M ^?1 s^?1).     

[2+2] Photocycloaddition of 2‐Morpholinoprop‐2‐enenitrile to Perinaphthenone

Perinaphthenone (=1H‐phenalen‐1‐one), known for efficient population of its T₁ (π,π*) state and suggested as a standard sensitizer for singlet oxygen (¹Δg) formation, forms a single stereoisomer of a head‐to‐tail [2+2] photoadduct across its C(2)=C(3) bond with 2‐morpholinoprop‐2‐enenitrile in benzene by broad band UV excitation (λ≥280 nm). The reaction is advantageously run to low conversion of starting materials only. The structure of the adduct, especially the relative configuration at C(9), has been derived from ¹H‐NMR data including NOE signal enhancement studies.     

Pyrrolo[3,2‐b]pyrroles—From Unprecedented Solvatofluorochromism to Two‐Photon Absorption

A combined experimental and theoretical study of the two‐photon absorption (2PA) properties of a series of quadrupolar molecules possessing a highly electron‐rich heterocyclic core, pyrrolo[3,2‐b]pyrrole, is presented. In agreement with quantum‐chemical calculations, large 2PA cross‐section values, σ_2PA≈10²–10³ GM (1 GM=10⁵⁰ cm⁴ s photon^?1), are observed at wavelengths of 650–700 nm, which correspond to the two‐photon allowed but one‐photon forbidden transitions. The calculations also predict that increased planarity of this molecule through removal of two N‐substituents leads to further increase in the σ_2PA values. Surprisingly, the most quadrupolar pyrrolo[3,2‐b]pyrrole derivative, containing two 4‐nitrophenyl substituents at positions 2 and 5, demonstrates a very strong solvatofluorochromic effect, with a fluorescence quantum yield as high as 0.96 in cyclohexane, whereas the fluorescence vanishes in DMSO.     

A Fluorescent Chemosensor for Dihydrogen Phosphate Ion Based on 2‐[2‐Hydroxy‐4‐(diethylamino) phenyl]‐1H‐imidazo[4,5‐b]phenazine‐Fe3+ Ensemble

A long wavelength emission fluorescent (612 nm) chemosensor with high selectivity for H₂PO₄^? ions was designed and synthesized according to the excited state intramolecular proton transfer (ESIPT). The sensor can exist in two tautomeric forms ('keto' and 'enol') in the presence of Fe³⁺ ion, Fe³⁺ may bind with the 'keto' form of the sensor. Furthermore, the in situ generated GY‐Fe³⁺ ensemble could recover the quenched fluorescence upon the addition of H₂PO₄^? anion resulting in an off‐on‐type sensing with a detection limit of micromolar range in the same medium, and other anions, including F^?, Cl^?, Br^?, I^?, AcO^?, HSO₄^?, ClO₄^? and CN^? had nearly no influence on the probing behavior. The test strips based on 2‐[2‐hydroxy‐4‐(diethylamino) phenyl]‐1H‐imidazo[4,5‐b]phenazine and Fe³⁺ metal complex ( GY‐Fe³⁺ ) were fabricated, which could act as convenient and efficient H₂PO₄^? test kits.     

Highly Emissive Luminogens Based on Imidazo[1,2‐a]pyridine for Electroluminescent Applications

A search for novel organic luminogens led us to design and synthesize some N‐fused imidazole derivatives based on imidazo[1,2‐a]pyridine as the core and arylamine and imidazole as the peripheral groups. The fluorophores were synthesized through a multicomponent cascade reaction (A³ coupling) of a heterocyclic azine with an aldehyde and alkyne, followed by Suzuki coupling and a multicomponent cyclization reaction. All of the compounds exhibited interesting photophysical responses, especially arylamine‐containing derivatives, which displayed strong positive solvatochromism in the emission spectra that indicated a more polar excited state owing to an efficient charge migration from the donor arylamine to the imidazo[1,2‐a]pyridine acceptor. The quantum yields ranged from 0.2 to 0.7 and depended on the substitution pattern, most notably that based on the donor group at the C2 position. Moreover, the influence of general and specific solvent effects on the photophysical properties of the fluorophores was discussed with four‐parameter Catalán and Kamlet–Taft solvent scales. The excellent thermal, electrochemical, and morphological stability of the compounds was explored by cyclic voltammetry, thermogravimetric analysis, and AFM methods. Furthermore, to understand the structure, bonding, and band gap of the molecules, DFT calculations were performed. The performance of the electroluminescence behavior of the imidazo[1,2‐a]pyridine derivative was investigated by fabricating a multilayer organic light‐emitting diode with a configuration of ITO/NPB (60 nm)/EML (40 nm)/BCP (15 nm)/Alq₃ (20 nm)/LiF (0.5 nm)/Al(100 nm) (ITO=indium tin oxide, EML=emissive layer, BCP=2,9‐dimethyl‐4,7‐diphenyl‐1,10‐phenanthroline, Alq₃=tris(8‐hydroxyquinolinato)aluminum), which exhibited white emission with a turn‐on voltage of 8 V and a brightness of 22 cd m^?2.     

Synthesis and properties of polyimides derived from 1,4‐bis(4‐aminophenoxy)‐2‐(6‐oxido‐6H‐dibenz[c,e] [1,2]oxaphosphorin‐6‐yl) phenylene

A new phosphorus‐containing aromatic diamine, 1,4‐bis(4‐aminophenoxy)‐2‐(6‐oxido‐6H‐dibenz[c,e] [1,2]oxaphosphorin‐6‐yl) phenylene ( 3 ) was synthesized by the nucleophilic aromatic substitution of 2‐(6‐oxido‐6H‐dibenz[c,e] [1,2]oxaphosphorin‐6‐yl)‐1,4‐dihydroxy phenylene ( 1 ) with 4‐fluoronitrobenzene, followed by catalytic hydrogenation. Light color, flexible, and creasable polyimides with high molecular weight, high glass transition, high thermal stability, improved organosolubility, and good oxygen plasma resistance were synthesized from the condensation of ( 3 ) with various aromatic dianhydrides in N,N‐dimethylacetamide, followed by thermal imidization. The number‐average molecular weights of polyimides are in the range of 7.0–8.3 × 10⁴ g/mol, and the weight‐average molecular weights are in the range of 12.5–16.5 × 10⁴ g/mol. The T_gs of these polyimides range from 230 to 304 °C by differential scanning calorimetry and from 228 to 305 °C by DMA. These polyimides are tough and flexible, with tensile strength at around 100 MPa. The degradation temperatures (T_d 5%) and char yields at 800 °C in nitrogen range from 544 to 597 °C and 59–65 wt %, respectively. Polyimides 5c and 5e , derived from OPDA and 6FDA, respectively, with the cutoff wavelength of 347 and 342 μm, respectively, show very light color. These polyimides also exhibit good oxygen plasma resistance. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2897–2912, 2007     

Synthesis,Structure, Properties,and Application of a Carbazole‐Based Diaza[7]helicene in a Deep‐Blue‐Emitting OLED

A carbazole‐based diaza[7]helicene, 2,12‐dihexyl‐2,12‐diaza[7]helicene ( 1 ), was synthesized by a photochemical synthesis and its use as a deep‐blue dopant emitter in an organic light‐emitting diode (OLED) was examined. Compound 1 exhibited good solubility and excellent thermal stability with a high decomposition temperature (T_d=372.1 °C) and a high glass‐transition temperature (T_g, up to 203.0 °C). Single‐crystal structural analysis of the crystalline clathrate ( 1 )₂ ? cyclohexane along with a theoretical investigation revealed a non‐planar‐fused structure of compound 1 , which prevented the close‐packing of molecules in the solid state and kept the molecule in a good amorphous state, which allowed the optimization of the properties of the OLED. A device with a structure of ITO/NPB (50 nm)/CBP:5 % 1 (30 nm)/BCP (20 nm)/Mg:Ag (100 nm)/Ag (50 nm) showed saturated blue light with Commission Internationale de L’Eclairage (CIE) coordinates of (0.15, 0.10); the maximum luminance efficiency and brightness were 0.22 cd A^?1 (0.09 Lm W^?1) and 2365 cd m^?2, respectively. This new class of helicenes, based on carbazole frameworks, not only opens new possibilities for utilizing helicene derivatives in deep‐blue‐emitting OLEDs but may also have potential applications in many other fields, such as molecular recognition and organic nonlinear optical materials.     

A Novel,One‐Pot Four‐Component Route to 2′‐Thioxo‐2′,3′‐dihydrospiro[indole‐3,6′‐[1,3]thiazin]‐2‐one Derivatives

An efficient route to 2′,3′‐dihydro‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives is described. It involves the reaction of isatine, 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one, and different amines in the presence of CS₂ in dry MeOH at reflux (Scheme 1). The alkyl carbamodithioate, which results from the addition of the amine to CS₂, is added to the α,β‐unsaturated ketone, resulting from the reaction between 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one and isatine, to produce the 3′‐alkyl‐2′,3′‐dihydro‐4′‐phenyl‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives in excellent yields (Scheme 2). Their structures were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses.     

Salts of HCN‐Cyanide Aggregates: [CN(HCN)2]− and [CN(HCN)3]−

Although pure hydrogen cyanide can spontaneously polymerize or even explode, when initiated by small amounts of bases (e.g. CN^?), the reaction of liquid HCN with [WCC]CN (WCC=weakly coordinating cation=Ph₄P, Ph₃PNPPh₃=PNP) was investigated. Depending on the cation, it was possible to extract salts containing the formal dihydrogen tricyanide [CN(HCN)₂]^? and trihydrogen tetracyanide ions [CN(HCN)₃]^? from liquid HCN when a fast crystallization was carried out at low temperatures. X‐ray structure elucidation revealed hydrogen‐bridged linear [CN(HCN)₂]^? and Y‐shaped [CN(HCN)₃]^? molecular ions in the crystal. Both anions can be considered members of highly labile cyanide‐HCN solvates of the type [CN(HCN)_n]^? (n=1, 2, 3 …) as well as formal polypseudohalide ions.     

Excitonically Coupled Cyclic BF2 Arrays of Calix[8]‐ and Calix[16]phyrin as Near‐IR‐Chromophores

Two giant calix[n]phyrin derivatives namely calix[8]‐ ( 4 ) and calix[16]phyrin ( 5 ), involving two and four BF₂ units, respectively, were prepared through the condensation of the bis‐naphthobipyrrolylmethene‐BF₂ complex ( 3 ) with pentafluorobenzaldehyde. Calix[n]phyrins 4 and 5 display extremely high extinction coefficients (3.67 and 4.82×10⁵ m ^?1 cm^?1, respectively) in the near‐IR region, which was taken as initial evidence for strong excitonic coupling within these cyclic multi‐chromophoric systems. Detailed insights into the effect of excitonic coupling dynamics on the electronic structure and photophysical properties of the macrocycles came from fluorescence, time‐correlated single‐photon counting (TCSPC) and transient absorption (TA) measurements. Support for these experimental findings came from theoretical studies. Theory and experiment confirmed that the coupling between the excitons depends on the specifics of the calix[n]phyrin structure, not just its size.     

Synthesis and photorefractivity of poly[methyl‐3‐(7‐dibenzo[a,g]carbazolyl)‐propylsiloxane]

7H‐Dibenzo[a,g]carbazole‐substituted polysiloxane (PSX‐[a,g]BCz) has been synthesized by hexachloroplatinate (IV) hydrate polymerization from poly(methylhydrosiloxane) and 7‐ally‐7H‐dibenzo[a,g]carbazole. PSX‐[a,g]BCz composite showed large orientational birefringences because of both large dipole moments and high‐polarizability anisotropies of P‐IP‐DC chromophore associated with the effective conjugation along the polyene. The 50‐μm thick photorefractive material containing 30 wt % 2‐[3‐[(E)‐2(piperidino)‐1‐ethenyl]‐5,5‐dimethyl]‐2‐cyclohexenyliden]malononitrile showed a diffraction efficiency of 51% at 55 V/μm, which corresponded to a Δn of 3.45 × 10^?3. PSX‐[a,g]BCz composite shows a fast time constant of 0.42 s at 34 °C and 55 V/μm, which corresponded to the space‐charge field of 12 V/μm under 70 V/μm. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1783–1791, 2008     

Three‐Step Synthesis of 3‐Aryl‐2‐sulfanylthieno[2,3‐b]‐, ‐[2,3‐c]‐, or ‐[3,2‐c]pyridines from the Corresponding Aryl(halopyridinyl)methanones

A convenient three‐step procedure for the synthesis of three types of 3‐aryl‐2‐sulfanylthienopyridines 4, 8 , and 12 has been developed. The first step of the synthesis of thieno[2,3‐b]pyridine derivatives 4 is the replacement of the halo with a (sulfanylmethyl)sulfanyl group in aryl(2‐halopyridin‐3‐yl)methanones 1 by successive treatment with Na₂S?9 H₂O and chloromethyl sulfides to give aryl{2‐[(sulfanylmethyl)sulfanyl]pyridin‐3‐yl}methanones 2 . In the second step, these were treated with LDA (LiNⁱPr₂) to give 3‐aryl‐2,3‐dihydro‐2‐sulfanylthieno[2,3‐b]pyridin‐3‐ols 3 , which were dehydrated in the last step with SOCl₂ in the presence of pyridine to give the desired products. Similarly, thieno[2,3‐c]pyridine and thieno[3,2‐c]pyridine derivatives, 8 and 12 , respectively, can be prepared from aryl(3‐chloropyridin‐4‐yl)methanones 5 and aryl(4‐chloropyridin‐3‐yl)methanones 9 , respectively.