Nano NiO/AlMCM‐41, a green synergistic,highly efficient and recyclable catalyst for the reduction of nitrophenols

Highly ordered mesoporous molecular sieves AlMCM‐41 and a new NiO/AlMCM‐41 nanocomposite were synthesized using a sol–gel method. Fourier transform infrared (FT‐IR) spectroscopy, X‐ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive X‐ray spectroscopy (EDX), and N₂ adsorption desorption analyses were used to examine the structure, morphology, size and phase composition of the synthesized NiO/AlMCM‐41 nanocomposites. AlMCM‐41 embedded with NiO nanoparticles was subsequently prepared using different nickel loadings in a direct synthetic route. The results show the successful deposition of NiO nanoparticles onto the framework of AlMCM‐41. AlMCM‐41 provides enormous benefits such as environmentally safe, economic viability and porosity when used as support for NiO nanoparticles. The excellent catalytic activities of AlMCM‐41 and NiO/AlMCM‐41 were investigated for the reduction of nitrophenols (4‐NP, 2‐NP) to aminophenols (4‐AP, 2‐AP) in water at ambient temperature. The best observed performance of reduction of NP with 100% conversion into analogous amino derivatives occurred within 6 min with an estimated rate constant of 0.46 min^?1. The efficiency of reduction was observed to increase as a function of NiO enrichment. The NiO/AlMCM‐41 nanocomposite could be recycled and reused up to five times without noticeable change in its structure and activity. These properties make NiO/AlMCM‐41 nanocomposite an ideal platform to study various heterogeneous catalytic processes which can have application in purification, catalysis, sensing devices, and green chemistry.     

Non‐Covalent Functionalization of Graphene with Bisphenol A for High‐Performance Supercapacitors

The reduced graphene oxide (RGO)/bisphenol A (BPA) composites were prepared by an adsorption‐reduction method. The composites are characterized by X‐ray diffraction (XRD), UV‐vis, thermogravimetric (TG) analysis, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM). The results confirm that BPA is adsorbed on the basal plane of RGO by π‐π stacking interaction. Furthermore, the electrochemical behaviors were evaluated by cyclic voltammetry, galvanostatic charge/discharge techniques and electrochemical impedance spectroscopy (EIS). The results show that the RGO/BPA nanocomposites exhibit ultrahigh specific capacitance of 466 F·g^?1 at a current density of 1 A·g^?1, excellent rate capability (more than 81% retention at 10 A·g^?1 relative to 1 A·g^?1) and superior cycling stability (90% capacitance decay after 4000 cycles). Consequently, the RGO/BPA nanocomposites can be regarded as promising electrode materials for supercapacitor applications.     

Synthesis of Ag Nanoparticle Doped MnO2/GO Nanocomposites at a Gas/Liquid Interface and its Application in H2O2 Detection

Ag/MnO₂/GO nanocomposites were synthesized via the method of gas/liquid interface based on silver mirror reaction, and a non‐enzymatic H₂O₂ sensor was fabricated through immobilizing Ag/MnO₂/GO nanocomposites on GCE. The composition and morphology of the nanocomposites were studied by energy‐dispersive X‐ray spectroscopy (EDS), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). Electrochemical investigation indicated that it exhibited a favorable performance for the H₂O₂ detection. Its linear detection range was from 3 μM to 7 mM with a correlation coefficient of 0.9960; the sensitivity was 105.40 μA mM^?1 cm^?2 and the detection limit was estimated to be 0.7 μM at a signal‐to‐noise ratio of 3.     

Triarylboron‐Linked Conjugated Microporous Polymers: Sensing and Removal of Fluoride Ions

A luminescent conjugated microporous polymer (BCMP‐3) has been synthesized in high yield by a carbon–carbon coupling reaction using triarylboron as a building unit. BCMP‐3 was fully characterized by using powder X‐ray diffraction analysis, Fourier transform infrared spectroscopy, ¹³C solid‐state NMR spectroscopy, field emission scanning electron microscopy, thermogravimetric analysis, and nitrogen and carbon dioxide adsorption. The new three‐dimensional conjugated framework possess a high Brunauer–Emmett–Teller (BET) specific surface area up to 950 m² g^?1 with a pore volume of 0.768 cm³ g^?1, good stability, and abundant boron sites in the skeleton. Under excited‐light irradiation, BCMP‐3 exhibits strong fluorescent emission at 488 nm with a high absolute quantum yield of 18 % in the solid state. Polymer BCMP‐3 acts as a colorimetric and fluorescent chemosensor with high sensitivity and selectivity for F^? over other common anions. In addition, the polymer also works as an adsorbent for F^? removal and shows good adsorption capacities of up to 24 mg g^?1 at equilibrium F^? concentrations of 16 mg L^?1 and a temperature of 298 K. The adsorption kinetics and isotherm were analyzed by fitting experimental data with pseudo‐second‐order kinetics and Langmuir equations. Furthermore, we highlight that BCMP‐3 is an adsorbent for fluoride removal that can be efficiently reused many times without loss of adsorption efficiency.     

KOH‐Activated Porous Carbons Derived from Chestnut Shell with Superior Capacitive Performance

Porous carbons (PC) were prepared from a waste biomass named chestnut shell via a two‐step method involving carbonization and KOH activation. The morphology, pore structure and surface chemical properties were investigated by scanning electron microscopy (SEM), N₂ sorption, Raman spectroscopy, X‐ray diffraction (XRD) and X‐ray photoelectron spectroscopy (XPS). The carbons have been evaluated as the electrode materials for supercapacitors by a two‐electrode system in 6 mol/L KOH electrolyte. Benefiting from the porous texture, high surface area and high oxygen content, the PCs derived from chestnut shell have exhibited high specific capacitance of 198.2 (PC‐1), 217.2 (PC‐2) and 238.2 F·g^?1 (PC‐3) at a current density of 0.1 A·g^?1, good rate capability of 55.7%, 56.6% and 54.9% in a range of 0.1–20 A·g^?1 and high energy density of 5.6, 6.1 and 6.7 Wh·kg^?1, respectively. This is believed to be due to electric double layer capacitance induced by the abundant micropores and extra pseudo‐capacitance generated by oxygen‐containing groups. At a power density of 9000 Wh·kg^?1, the energy density is 3.1, 3.5 and 3.7 Wh·kg^?1 for PC‐1, PC‐2 and PC‐3, respectively, demonstrating the potential of the carbons derived from chestnut shells in energy storage devices.     

Synthesis of MnO2/MWNTs Nanocomposites Using a Sonochemical Method and Application for Hydrazine Detection

A sonochemical method has been successfully used to synthesize MnO₂/MWNTs nanocomposites. The structure and nature of the resulting MnO₂/MWNTs composite were characterized by scanning electron microscopy (SEM), energy‐dispersive X‐ray diffraction (EDX), X‐ray photoelectron spectroscopy (XPS).The results show that the sonochemically synthesized MnO₂ nanoparticles were homogeneously dispersed on the modified MWNT surfaces. The performance of the MnO₂/MWNTs nanocomposites modified electrode was characterized using cyclic voltammetry (CV) and Nyquist plots. The electrode exhibits efficient electron transfer ability and high electrochemical response towards hydrazine. This may be attributed to the small particle size, high dispersion of MnO₂ particles. The fabricated hydrazine sensor showed a wide linear range of 5.0×10^?7–1.0×10^?3 M with a response time less than 5 s and a detection limit of 0.2 μM. Taking the advantage of the unique properties of both MWNTs and MnO₂, it would greatly broaden the applications of MWNTs and MnO₂.     

Nickel oxide/expanded graphite nanocomposite electrodes for supercapacitor application

Nickel oxide/expanded graphite (NiO/EG) nanocomposites with different loading of EG were prepared through chemically depositing Ni(OH)₂ in EG followed by thermal annealing and characterized by scanning electron microscopy (SEM), powder X-ray diffraction (XRD), Brunauer–Emmet–Teller (BET) isotherm and electrochemical measurements. The prepared NiO/EG composites were found to be crystalline and highly porous with high specific surface area and pore volume. SEM analysis reveals uniform porous morphology for NiO in the NiO/EG-60 nanocomposites which shows good specific capacitance (510?F?g^?1) at a current density of 100?mA?g^?1 in 6?mol?L^?1 KOH measured by chronopotentiometry employing a three-electrode system. The specific capacitance retention of the NiO/EG-60 nanocomposites was found to be ca. 95% after 500 continuous galvanostatic charge–discharge cycles, indicating that the NiO/EG nanocomposites can become promising electro-active materials for supercapacitor application.     

Hydrothermal Synthesis and Characterization of Quasi‐1‐D Tungsten Disulfide Nanocrystal

Quasi‐1‐D (one‐dimensional) tungsten disulfide (WS₂) nanocrystal was synthesized through a two‐step hydrothermal process. Energy dispersive spectroscopy (EDS) identified that the chemical composition of the final product was WS₂. The produced nanocrystal was further characterized with X‐ray diffraction (XRD), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). The results have shown that most of the products are quasi‐1‐D nanocrystals with the width around 140 nanometers and thickness about 30 nanometers. However, the length of the majority of nanocrystals could reach 1 micron. The selected area electron diffraction (SAED) pattern indicates that the nanocrystal is of a single crystal. N₂ adsorption measurement revealed that the BET specific surface area of this sample is 97 m²g^?1, which indicates that the as‐prepared product has better catalyzing and friction performance.     

Decoration of Fe3O4 nanoparticles on the surface of poly(acrylic acid) functionalized multi‐walled carbon nanotubes by covalent bonding

Fe₃O₄ nanoparticles were indirectly implanted onto functionalized multi‐walled carbon nanotubes (MWCNTs) leading to a nanocomposite with stronger magnetic performance. Poly(acrylic acid) (PAA) oligomer was first reacted with hydroxyl‐functionalized MWCNTs (MWCNTs‐OH) forming PAA‐grafted MWCNTs (PAA‐g‐MWCNTs). Subsequently, Fe₃O₄ nanoparticles were attached onto the surface of PAA‐g‐MWCNTs through an amidation reaction between the amino groups on the surface of Fe₃O₄ nanoparticles and the carboxyl groups of PAA. Fourier transform infrared spectra confirmed that the Fe₃O₄ nanoparticles and PAA‐g‐MWCNTs were indeed chemically linked. The morphology of the nanocomposites was characterized using transmission electron microscope (TEM). The surface and bulk structure of the nanocomposites were examined using X‐ray diffraction, X‐ray photoelectron spectrometer (XPS), and thermogravimetric analysis (TGA). The magnetic performance was characterized by vibrating sample magnetometer (VSM) and the magnetic saturation value of the magnetic nanocomposites was 47 emu g^?1. The resulting products could be separated from deionized water under an external magnetic field within about 15 s. Finally, the magnetorheological (MR) performances of the synthesized magnetic nanocomposites and pure Fe₃O₄ nanoparticles were examined using a rotational rheometer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Highly Sensitive Electrochemiluminescent Insecticide Sensor Based on ZnO Nanocrystals Anchored Nickel Foam for Determination of Imidacloprid in Real Samples

In this work, a novel electrochemiluminescent (ECL) pesticide sensor based on zinc oxide nanocrystals decorated nickel foam is proposed for determination of imidacloprid for the first time. The silica film was used as a morphology‐controlling factor for modification of the electrode with zinc oxide nanocrystals. Zinc oxide was selected as luminescent material due to its cheapness, non‐toxicity, high thermal stability and excellent luminescence properties which truly adhered on the surface of nickel foam. The K₂S₂O₈ was used as strong co‐reactant for this purpose. The silica template plays an important role in controlling the size of ZnO nanocrystals. The Physical morphology of the ZnO/Ni‐foam electrode was performed by electrochemical impedance spectroscopy, Brunauer‐Emmett‐Teller (BET), X‐Ray diffraction analysis, field emission scanning electron microscopy, and energy‐dispersive X‐ray analysis. The ultra‐sensitive electrochemiluminescence method was successfully used for ultra‐trace determination of imidacloprid. The linear dynamic range and low detection limit were obtained 3×10^?14 ?8×10^?8 M and 4.4×10^?15 M, respectively. Also, the relative standard deviation for 15 repetitive optical signals was calculated 1.09 %.The present ECL sensor exhibited superior performance toward the accurate determination of imidacloprid with good reproducibility and stability.     

Facile Mechanochemical Synthesis of Nano SnO2/Graphene Composite from Coarse Metallic Sn and Graphite Oxide: An Outstanding Anode Material for Lithium‐Ion Batteries

A facile method for the large‐scale synthesis of SnO₂ nanocrystal/graphene composites by using coarse metallic Sn particles and cheap graphite oxide (GO) as raw materials is demonstrated. This method uses simple ball milling to realize a mechanochemical reaction between Sn particles and GO. After the reaction, the initial coarse Sn particles with sizes of 3–30 μm are converted to SnO₂ nanocrystals (approximately 4 nm) while GO is reduced to graphene. Composite with different grinding times (1 h 20 min, 2 h 20 min or 8 h 20 min, abbreviated to 1, 2 or 8 h below) and raw material ratios (Sn:GO, 1:2, 1:1, 2:1, w/w) are investigated by X‐ray diffraction, X‐ray photoelectron spectroscopy, field‐emission scanning electron microscopy and transmission electron microscopy. The as‐prepared SnO₂/graphene composite with a grinding time of 8 h and raw material ratio of 1:1 forms micrometer‐sized architected chips composed of composite sheets, and demonstrates a high tap density of 1.53 g cm^?3. By using such composites as anode material for LIBs, a high specific capacity of 891 mA h g^?1 is achieved even after 50 cycles at 100 mA g^?1.     

Zinc‐containing ionic liquid as a dual solvent‐catalyst in base‐free condensations under ultrasonic irradiation

In this study, natural‐based ionic liquid (IL) using caffeine (Caff), trietahnolamine (TEA) and ZnBr₂, [Caff‐TEA]⁺[ZnBr₃]^?, which features high catalytic activity and environmentally‐friendly nature was synthesized with melting point of 76 °C by a facile method. The synthesized [Caff‐TEA]⁺[ZnBr₃]^? has high catalytic activity as both of catalyst and solvent in condensation reactions for the synthesis of benzylidenes, bis‐hydroxyenones and xanthenes. Synthesized IL was characterized by proton nuclear magnetic resonance (¹HNMR), Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD) and Energy‐dispersive X‐ray spectroscopy (EDX) analysis. Also synthesized heterocycles were characterized by FT‐IR, proton nuclear magnetic resonance (¹HNMR) and carbon nuclear magnetic resonance (¹³CNMR).     

Correlating the Morphological Properties and Structural Organization of Monodisperse Spherical Silica Nanoparticles Grown on a Commercial Silica Surface

A variety of nanosilicas have been widely used to fabricate rough surfaces with superhydrophobic and superhydrophilic properties. In this context, we prepared mixed silica and mixed nanosilica that were generated by the growth and self‐assembly of synthesized monodisperse silica nanospheres (11–30 nm, 363 m² g^?1) on the surface of Sylopol‐948 and Dispercoll S3030 by using a base‐catalyzed sol–gel route. Using this process, the interactions and hierarchical structure between the nano‐ and microsized synthesized silica particles were studied by changing the amount of tetraethoxysilane. The resulting materials were characterized by BET analysis, small‐angle X‐ray scattering (SAXS), dynamic light scattering, FTIR spectroscopy, and SEM. The mixed silica presented a higher specific surface area (326 m² g^?1), a six‐fold higher percentage of (SiO)₆ (44–68 %), and a higher amount of silanol groups (14.0–30.7 %) than Sylopol‐948 (271 m² g^?1, 42.6 %, and 12.5 %, respectively). The morphological and hierarchical structural differences in the silica nanoparticles synthesized on the surface of commercial silica (micrometric or nanometric) were identified by SAXS. Mixed micrometric silica exhibited a higher degree of structural organization between particles than mixed nanosilica.     

Acrylamide–itaconic acid superabsorbent polymers and superabsorbent polymer/mica nanocomposites

Superabsorbent polymer acrylamide (AM)/itaconic acid (IA) and its nanocomposite were synthesized by redox polymerization in an aqueous solution of both monomers with mica used as an inorganic additive. The influences of IA concentration, mica content, and crosslinker concentration on the water absorption and physical properties of the superabsorbent polymer and its nanocomposite were examined. Water absorbency in artificial urine by the synthesized copolymers, and the gel strength of the superabsorbent copolymers and their nanocomposites, were tested with loads of 0.28 or 0.70 psi. Transmission electron micrographs and X‐ray diffraction confirmed that the polymer chains were successfully intercalated into the silicate layers in the mica. The water absorbency and the artificial urine absorbency of the composite with an AM‐to‐IA mole ratio of 95:5, 0.2% mol N‐MBA, and 5% w/w mica were 748 ± 5 and 76 ± 2 g g^?1, respectively, whilst the neat copolymer achieved only 640 ± 7 and 72 ± 2 g g^?1 in water and artificial urine, respectively. The viscoelastic behavior suggested that the swollen gel of the nanocomposites exhibited mechanical stability and elasticity. Copyright © 2009 John Wiley & Sons, Ltd.     

Preparation of polypyrrole‐graft‐poly(N‐isopropylacrylamide)/silver nanocomposites from pyrrolyl‐capped macromonomer by AgNO3 and their stimuli responsibility of light emission

Pyrrolyl‐capped poly(N‐isopropylacrylamide) macromonomers (Py‐PNIPAM) were prepared through reversible addition‐fragmentation‐transfer polymerization with benzyl 1‐pyrrolylcarbodithioate as chain‐transfer agent. Polymerizations of Py‐PNIPAM with/without pyrrole using AgNO₃ as oxidizing agent and dimethylforamide as solvent resulted in graft copolymers of polypyrrole‐graft‐poly(N‐isopropylacrylamide) (PPy‐g‐PNIPAM) as well as silver nanoparticles, leading to the formation of PPy‐g‐PNIPAM/silver nanocomposites. The resulting nanocomposites were soluble in water when the content of PPy was low, and when the molar ratio of Py/Py‐PNIPAM increased to 30, the resulting products became insoluble in water. The resulting nanocomposites had special optical properties because of PPy as well as the temperature‐responsible PNIPAM. The chemical structure and composition of nanocomposite were characterized by ¹H nuclear magnetic resonance spectroscopy, gel permeation chromatograms, fourier transform infrared spectroscopy, and X‐ray diffraction. Their optical properties were characterized by UV–vis and fluorescence spectroscopy. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6950–6960, 2008     

用于可充锂电池的高倍率磷酸铁(II)锂正极材料

本文以聚氧化乙烯为碳源,用柠檬酸辅助湿化学法合成了高倍率的碳包覆的LiFePO₄。使用热重、粉末X射线衍射、扫描电子显微镜、透射电子显微镜、循环伏安、电化学阻抗和恒流充放电表征材料的结构和电化学性质。结果表明,该材料组成为5 wt%疏松多孔的碳包覆相纯度很高的小的LiFePO₄颗粒。该材料适用于高倍率充放电,在5 C、10 C和20C的放电倍率下可以分别得到120、90和60 mAh·g^-1的稳定容量。     

Semiconductor Nanocrystal Engineering by Applying Thiol‐ and Solvent‐Coordinated Cation Exchange Kinetics

Thiol‐ and solvent‐coordinated cation exchange kinetics have been applied to engineer the composition and crystallinity of novel nanocrystals. The detailed thermodynamics and kinetics of the reactions were explored by NMR spectroscopy, time‐dependent photoluminescence (PL) characterizations and theoretical simulations. The fine structure of the colloidal semiconductor nanocrystals (CSNCs) was investigated by X‐ray absorption near‐edge structure (XANES) and extended X‐ray absorption fine structure (EXAFS). In this way, high‐quality p‐type Ag‐doped ZnS quantum dots (QDs) and Au@ZnS hetero‐nanocrystals with a cubic phase ZnS shell were synthesized successfully.The unprecedented dominant Ag⁺‐dopant‐induced fluorescence and p‐type conductivity in the zinc‐blende ZnS are reported.     

High Performance Full Sodium‐Ion Cell Based on a Nanostructured Transition Metal Oxide as Negative Electrode

A novel design of a sodium‐ion cell is proposed based on the use of nanocrystalline thin films composed of transition metal oxides. X‐ray diffraction, Raman spectroscopy and electron microscopy were helpful techniques to unveil the microstructural properties of the pristine nanostructured electrodes. Thus, Raman spectroscopy revealed the presence of amorphous NiO, α‐Fe₂O₃ (hematite) and γ‐Fe₂O₃ (maghemite). Also, this technique allowed the calculation of an average particle size of 23.4 Å in the amorphous carbon phase in situ generated on the positive electrode. The full sodium‐ion cell performed with a reversible capacity of 100 mA h g^?1 at C/2 with an output voltage of about 1.8 V, corresponding to a specific energy density of about 180 W h kg^?1. These promising electrochemical performances allow these transition metal thin films obtained by electrochemical deposition to be envisaged as serious competitors for future negative electrodes in sodium‐ion batteries.     

Thermal decomposition of ammonium perchlorate activated via addition of NiO nanocrystals

This work reported on the thermal decomposition of ammonium perchlorate activated by addition of NiO nanocrystals with different surface areas. NiO samples were characterized by X-ray diffraction (XRD), transition electron microscope (TEM), Brunauer-Emmett-Teller (BET) technique, Fourier transform infrared spectroscopy (FTIR), and Raman spectroscopy. With increasing annealing temperature, the surface areas of NiO samples reduced from 108.6 to 0.9 m² g⁻¹. The catalytic activities of NiO nanocrystals on the thermal decomposition of ammonium perchlorate were investigated by thermogravimetric analysis (TG) coupled with differential thermal analysis (DTA). With addition of NiO nanocrystals, thermal decomposition temperature of AP decreased greatly. Larger surface areas of NiO nanocrystals promoted the thermal decomposition of AP.     

Hydrothermal Self-assembly Synthesis of Mn3O4Reduced Graphene Oxide Hydrogel and Its High Electrochemical Performance for Supercapacitors

In the present work Mn3O4/reduced graphene oxide hydrogel （Mn3O4-rGOH） with three dimensional （3D） networks was fabricated by a hydrothermal self-assembly route. The morphology, composition, and microstructure of the as-obtained samples were characterized using powder X-ray diffraction （XRD）, X-ray photoelectron spectroscopy （XPS）, thermogravimetry analysis （TG）, atomic absorption spectrometry （AAS）, field emission scanning electron microscopy （FESEM） and transmission electron microscope （TEM）. Moreover, the electrochemical behaviors were evaluated by cyclic voltammogram （CV）, galvanostatic charge-discharge and electrochemical impedance spectroscopy （EIS）. The test results indicated that the hydrogel with 6.9% Mn3O4 achieved specific capacitance of 148 F.g^-1 at a specific current of 1 A.g^-1, and showed excellent cycling stabilily with no decay after 1200 cycles. In addition, its specific capacitance could retain 70% even at 20 A.g^- 1 in comparison with that at 1 A.g ^-1 and the operating window was up to 1.8 V in a neutral electrolyte.