Amine‐Assisted Syntheses of Carbonate‐Free and Highly Crystalline Nitrate‐Containing Zn‐Al Layered Double Hydroxides

Zn‐Al layered double hydroxides (LDHs), with nitrate as the charge balancing anion in the interlayer space, were synthesized by precipitation from homogeneous solution containing different amines [e.g., hexamethylenetetraamine (HMTA), diethylenediamine (DEDA), trimethylamine (TMA) and dimethylamine (DMA)]. The applied method does not require nitrogen atmosphere. The solution pH and concentration of different amines were varied in order to identify the controlling parameters and whether nitrate or carbonate are the interlayer anion. Particularly, the addition of amines turns out to be an effective tool for the synthesis of nitrate containing Zn‐Al LDHs independent from the nitrogen atmosphere. The structure, textural, composition, and morphological properties were investigated using the powder X‐ray diffraction (PXRD), thermogravimetric analysis (TGA), FT‐IR spectroscopy, and scanning electron microscopy (SEM). The analyses showed that the samples had high crystallinity and purity. The NO₃‐ZnAl LDHs samples show that LDH sheets are predominantly smooth textured and the thickness of LDH sheets are found to be around 23 nm. The results also indicate that this method successfully produces a NO₃^– form Zn‐Al LDH that is almost identical to the one synthesized by conventional methods.     

Adsorption of Metanil Yellow Azoic Dye from Aqueous Solution onto Mg‐Fe‐NO3 Layered Double Hydroxide

We report the preparation and characterization of a layered double hydroxide (LDH) adsorbent for azoic dye, metanil yellow (yellow GX; YGX) removal. The nanoparticles of Mg‐Fe‐LDH‐NO₃ adsorbent were prepared with Mg/Fe molar ratio of 3:1 by a hydrothermal process and coprecipitation method at pH 9.5 and were characterized by X‐ray powder diffraction (XRPD), thermal gravimetric analysis (TGA), elemental analysis, and Fourier transform infrared spectroscopy (FT‐IR). The size and morphology of nanoparticles were examined by scanning electron microscopy (SEM). The XRD patterns indicate that the intercalation of YGX between the LDH layers has not occurred and surface adsorption has happened. In the adsorption experiments, the Gibbs free energy ΔG⁰ values, the enthalpy ΔH⁰, and entropy ΔS⁰ was determined. The isotherms showed that the adsorption of YGX by Mg‐Fe‐LDH‐NO₃ was both consistent with Langmuir and Freundlich equations.     

The effect of OCoAl‐LDH and OCoFe‐LDH on the combustion behaviors of polyvinyl chloride

The effects of the modified layered double hydroxide (LDH) of Co/Al (OCoAl‐LDH) and the modified LDH of Co/Fe (OCoFe‐LDH) on the combustion behaviors of polyvinyl chloride (PVC) during pyrolysis processes were compared and investigated. The thermal degradation and combustion behavior of the PVC composites were investigated by thermogravimetric analysis (TGA), microscale combustion calorimetry (MCC), and cone calorimetry (CONE). The results indicate that the incorporation of LDHs brought about the improved thermal stability and reduced heat release of PVC composites at a high temperature. The smoke‐suppression properties of the composites are investigated by steady‐state tube furnace (SSTF), and the results indicated that the toxic gases such as CH₄, CO, and N_xO were inhibited by both of the two LDHs, but the OCoFe‐LDH has a better effect on the smoke suppression. Subsequently, the char layer was investigated by scanning electron microscopy–energy‐dispersive spectrometry (SEM‐EDS) and Raman analysis. The results indicate that the LDHs can promote the dechlorination of PVC during the thermal oxidation process and can inhibit the production of HCl in inert gas. Generally, OCoAl‐LDH and OCoFe‐LDH can be potential catalysts for waste disposal and can improve the fire safety of PVC.     

Adsorption of 4‐Chloro‐2‐methylphenoxy Acetic Acid (MCPA) from Aqueous Solution onto Cu‐Fe‐NO3 Layered Double Hydroxide Nanoparticles

The nanoparticles of Cu‐Fe‐NO₃ layered double hydroxide (LDH) were prepared with Cu/Fe molar ratio of 2:1 by a thermal process and co‐precipitation method at pH 9 and were characterized by X‐ray powder diffraction (XRPD), thermal gravimetric analysis (TGA), atomic adsorption spectroscopy (AAS) and fourier infrared spectroscopy (FT‐IR). The size and morphology of nanoparticles were examined by transmission electron microscopy (TEM). Cu‐Fe‐NO₃‐LDH was studied as a potential adsorbent of the acid herbicide MCPA [(4‐chloro‐2‐methylphenoxy) acetic acid] as function of pH, contact time and temperature. The results showed high and rapid adsorption of MCPA on the LDH. The characterization of the adsorption products by XRD indicates that the intercalation of MCPA between the LDH layers has not occurred and surface adsorption has happened. The adsorption kinetic was tested for pseudo‐first‐order, pseudo‐second‐order, elovich and intra‐particle diffusion kinetic models and rate constants were calculated. Freundlich and Langmuir isotherm models were applied to experimental equilibrium data obtained from the measurements of pesticide adsorption. Langmuir isotherm slightly better fitted to the experimental data than that of Freundlich. In the adsorption experiments, the Gibbs free energy ΔG⁰ values, the enthalpy ΔH⁰, and entropy ΔS⁰ were determined.     

Nitrogen-rich 6-（3,5-Dimethylpyrazol-1-yl）-3-（2,4,6-trinitroanilino）-1,2,4,5-tetrazin： Synthesis, Crystal Structure and Thermal Property

6-（3,5-Dimethylpyrazol-1-yl）-3-（2,4,6-trinitroanilino）-1,2,4,5-tetrazin （1） has been synthesized and characterized by ^1H NMR, MS, elemental analysis, infrared spectra and thermal analyses. The crystal structure was determined by X-ray diffraction method. 1 is crystallized in P21/c space group of monoclinic crystal system, and exhibits good physical properties, such as high densities （〉 1.55 g·cm^-3） and good thermal stabilities （Td〉220 ℃）. The intrermolecular hydrogen bonds construct the P- and M-helices from organic molecules and may contribute to the high melting points.     

Synthesis and Characterization of PE-g-MA／MgAI-LDH Exfoliation Nanocomposite via Solution Intercalation

An organo‐modified MgAl‐layered double hydroxide (OMgAl‐LDH) was successfully exfoliated in the xylene solution of polyethylene‐grafted‐maleic anhydride (PE‐g‐MA) under re‐fluxing condition. A PE‐g‐MA/MgAl‐LDH exfoliation nanocomposite was formed after the precipitation of PE‐g‐MA from the dispersion system. The structure and thermal property of the PE‐g‐MA/MgAl‐LDH exfoliation nanocomposite were characterized by X‐ray diffraction (XRD), transmission electron microscopy (TEM), and thermogravimetry analysis (TGA). The disappearance of d₀₀₁ XRD peak of OMgAl‐LDH at 20 = 3.2° suggests that the MgAl hydroxide sheets are exfoliated in the nanocomposite. The TEM image shows that the MgAl hydroxide sheets of less than 70 nm in length or width are exfoliated and dispersed disorderly in PE‐g‐MA matrix. TGA profiles indicate that the PE‐g‐MA/MgAl‐LDH nanocomposite with 5 wt% OMgAl‐LDH loading shows a faster charring process in temperature range from 210 to 390 °C and a greater thermal stability beyond 390 °C than PE‐g‐MA does. The decomposition temperature of the nanocomposite is 25 °C higher than that of PE‐g‐MA as measured at 50% weight loss. The PE‐g‐MA/MgAl‐LDH nanocomposite is promising for application of flame‐retardant polymeric materials.     

Synthesis of Deuterium Labeled (±)‐2,5‐Dimethoxyamphetamine (DMA), (±)‐4‐Bromo‐2,5‐Dimethoxyamphetamine (DOB), and (±)‐4‐Methoxyamphetamine (PMA) as Internal Standards for Quantitative Analyses by GC‐MS

DMA, DOB and PMA are increasingly abused central nervous system stimulants with neurotoxic properties. In recent years, many controlled substance analogs (designer drugs) with a large variety of structures have reached the illegal market, making their identification difficult. Therefore, this work studies the synthesis of DOB‐d₆, DMA‐d₆ and PMA‐d₃ as internal standards for use in gas chromatography‐mass spectrometry (GC‐MS) to identify controlled substances.     

Synthesis of Deuterium Labeled Standards of 1‐Benzylpiperazine,Fenetylline, Nicocodeine and Nicomorphine

Increasingly abused, 1‐benzylpiperazine (BZP), fenetylline, nicocodeine and nicomorphine are central nervous system stimulants with neurotoxic properties. In recent years, many controlled substance analogs (designer drugs) with a large variety of structures have reached illegal markets, making their identification difficult. This work studies the synthesis of BZP‐d₇, fenetylline‐d₄, nicocodeine‐d₄ and nicomorphine‐d₈, as internal standards for use in gas chromatography‐mass spectrometry (GC‐MS) analysis for identification of these controlled substances.     

Synthesis and Characterization of Poly(ethylene terephthalate)/Modified Lithium‐Aluminum‐Layered Double Hydroxide Nanocomposites Prepared Using In‐situ Polymerization

Layered double hydroxides are a type of layered stacked compound, which can be intercalated with organic‐molecule modifiers. An ion‐exchange process for layered double hydroxide (LDH) was used to intercalate water‐soluble sulfanilic acid salt (SAS) and dimethyl 5‐sulfoisopthalate (DMSI) into lithium aluminum layered double hydroxides (LiAl LDHs). In this work, a hydrothermal process was used to modify LiAl LDHs, and the modified LiAl LDHs were treated with either SAS or DMSI through an ion‐exchange process and were then intercalated using bis‐hydroxyethylene terephthalate (BHET). The results indicate that the modified LiAl LDHs improved the interlayer compatibility between the PET and LiAl LDH layers; thus, enabling the oligomer molecules to more easily enter the gallery of the LiAl LDH layers so that polymer chains could be included between the LDH layers during polymerization of the matrix. The better barrier, mechanical properties, and thermal stability of these new types of PET nanocomposites are discussed.     

Effect of Electrolytes and Polymers on the Thixotropy of Mg‐Al‐Layered Double Hydroxides/Kaolinite Dispersions

The effect of electrolytes (NaCl and CaCl₂) and polymers (CPAM and HPAM) on the thixotropy of Mg‐Al‐layered double hydroxide (LDHs)/kaolinite dispersions has been investigated. It was observed that the type of thixotropy in LDH/kaolinite dispersions may be affected by NaCl, but not by CaCl₂ in range of concentration of interest. The type of thixotropy in LDH/kaolinite dispersion with R=0 transformed from positive thixotropy to complex thixotropy and at last positive thixotropy again with the concentration of NaCl in range of 0.00–0.10 mol·L⁻¹; the type of thixotropy in LDHs/kaolinite dispersions with R=0.25 transformed from complex thixotropy to positive thixotropy and then complex thixotropy again with the concentration of NaCl in range of 0.00–0.10 mol·L⁻¹. The type of thixotropy in LDH/kaolinite dispersion with R=0 may be not affected by cationic polyacrylamide (CPAM) and hydrolyzed polyacrylamide (HPAM); but the LDHs/kaolinite dispersions with R=0.25 transformed from complex thixotropy to positive thixotropy with the both polymers concentration in range of interest, which indicated that the microstructure of the dispersion changed from weak folc sediments structure to steric network structure.     

Synthesis of heptamolybdate‐intercalated MgAl LDHs and its application in polyurethane elastomer

Heptamolybdate (Mo₇O₂₄^6?) was intercalated in the interlayer space between MgAl‐layered double hydroxides (Mo‐MgAl LDHs) by the hydrothermal and ion exchange method, and then polyurethane elastomer (PUE) based composites were prepared by the prepolymerization method with different amounts of Mo‐MgAl LDHs. X‐ray diffraction (XRD), Fourier transform infrared (FTIR) spectra, laser Raman spectroscopy (LRS), and scanning electron microscopy (SEM) were employed to characterize the obtained LDHs. The performance of the PUE/LDHs were evaluated by measuring their thermal gravimetric, heat release rate (HRR), and smoke density (Ds). The results show that PUE/LDH composites exhibit a lower peak heat release rate (pk‐HRR), Ds, and a prolonged combustion time, in comparison with neat PUE. Comparison between NO₃‐MgAl LDHs and Mo‐MgAl LDHs containing composites show that the introduction of Mo⁶⁺ is able to facilitate flame retardance and smoke suppression efficiency, which results mainly from the presence of MoO₃ derived from the decomposition of Mo₇O₂₄^6? intercalated LDHs. Mo‐MgAl LDHs reduce the pk‐HRR of composites by 39% with only 1 wt.% content, and the maximum Ds of composites is reduced to a minimal value of 274 with 10 wt.% Mo‐MgAl LDHs. More importantly, LDHs would improve the mechanical properties at a low content. The experimental results reveal the potential of Mo₇O₂₄^6? intercalated LDHs to improve both the flame retardancy and smoke suppression of PUE. Copyright © 2015 John Wiley & Sons, Ltd.     

Cobalt(II)‐Terephthalate Frameworks Containing Bis(benz­imidazole) Derivative Co‐ligands: Syntheses,Crystal Structures,Catalytic and Fluorescence Properties

Two metal‐organic coordination polymers of Co^II with the molecular formulae [Co(L₁)(tp)(H₂O)₂]_n ( 1 ) and [Co(L₂)(tp) · H₂O]_n ( 2 ) [L₁ = 1, 4‐bis(benzimidazole‐1‐ylmethyl)‐ benzene; L₂ = 1, 1‐(1, 4‐butanediyl)bis(5, 6‐dimethylbenzimidazole); tp = terephthalate] were synthesized and characterized by single‐crystal X‐ray diffraction studies, infrared spectroscopy (IR), thermogravimetric analysis (TGA), X‐ray powder diffraction (XRPD), and elemental analysis. The structure determination of complex 1 reveals a 2D layer with (4, 4) topology, with Co^II ions at the nodes connected through tp and L₁ co‐ligands. Complex 2 is the first example of a four‐connected SrAl₂ structure type ( sra , 4²6³8 topology) with threefold interpenetration in Co^II coordination frameworks, forming by bridging L₂ and tp co‐ligands. In addition, the fluorescence and catalytic performances of the complexes for the degradation of methyl orange were investigated.     

Elucidating gating effects for hydrogen sorption in MFU-4-type triazolate-based metal-organic frameworks featuring different pore sizes

A highly porous member of isoreticular MFU‐4‐type frameworks, [Zn₅Cl₄(BTDD)₃] (MFU‐4l(arge)) (H₂‐BTDD=bis(1H‐1,2,3‐triazolo[4,5‐b],[4′,5′‐i])dibenzo[1,4]dioxin), has been synthesized using ZnCl₂ and H₂‐BTDD in N,N‐dimethylformamide as a solvent. MFU‐4l represents the first example of MFU‐4‐type frameworks featuring large pore apertures of 9.1 Å. Here, MFU‐4l serves as a reference compound to evaluate the origin of unique and specific gas‐sorption properties of MFU‐4, reported previously. The latter framework features narrow‐sized pores of 2.5 Å that allow passage of sufficiently small molecules only (such as hydrogen or water), whereas molecules with larger kinetic diameters (e.g., argon or nitrogen) are excluded from uptake. The crystal structure of MFU‐4l has been solved ab initio by direct methods from 3D electron‐diffraction data acquired from a single nanosized crystal through automated electron diffraction tomography (ADT) in combination with electron‐beam precession. Independently, it has been solved using powder X‐ray diffraction. Thermogravimetric analysis (TGA) and variable‐temperature X‐ray powder diffraction (XRPD) experiments carried out on MFU‐4l indicate that it is stable up to 500 °C (N₂ atmosphere) and up to 350 °C in air. The framework adsorbs 4 wt % hydrogen at 20 bar and 77 K, which is twice the amount compared to MFU‐4. The isosteric heat of adsorption starts for low surface coverage at 5 kJ mol^?1 and decreases to 3.5 kJ mol^?1 at higher H₂ uptake. In contrast, MFU‐4 possesses a nearly constant isosteric heat of adsorption of ca. 7 kJ mol^?1 over a wide range of surface coverage. Moreover, MFU‐4 exhibits a H₂ desorption maximum at 71 K, which is the highest temperature ever measured for hydrogen physisorbed on metal–organic frameworks (MOFs).     

Catalytic transfer hydrogenation of furfural into furfuryl alcohol over Ni–Fe‐layered double hydroxide catalysts

Layered double hydroxides (LDHs) and their derivatives have been reported to be widely used as heterogeneous catalysts in various reactions. Herein, Ni‐Fe LDHs with the controlled Ni/Fe molar ratios (2:1, 3:1, 4:1) were synthesized via an easy hydrothermal method, which were used to catalyze the selective reduction of biomass‐derived furfural into furfuryl alcohol using 2‐propanol as a H‐donor under autogenous pressure and characterized using FT‐IR, XRD, TGA, BET, SEM, NH₃‐TPD, and CO₂‐TPD. It was found that the LDH with a Ni/Fe molar ratio of 3:1 demonstrated the best catalytic activity among the LDHs with different Ni/Fe molar ratios, which showed 97.0% conversion of furfural and 90.2% yield of furfuryl alcohol at 140°C for 5 hr. This was attributable to the synergistic effect of acidic sites and basic sites of the catalyst.     

Synthesis and Characterization of [Zn‐Al] Layered Double Hydroxides: Effect of the Operating Parameters

In this study, [Zn‐Al] layered double hydroxides (LDHs ) were prepared using the coprecipitation method at constant pH . The synthesis parameters (including the aging time, synthesis pH , nature of the alkali, concentration of metallic salts, and the cationic molar ratio R = Zn/Al) were varied in order to elucidate their effect on the properties of the obtained materials. Different characterization techniques, namely X‐ray diffraction, Fourier transform infrared, thermogravimetric analysis‐differential thermogravimetry, transmission electron microscopy, energy‐dispersive X‐ray, inductively coupled plasma, and photoluminescence, were used in this study. It was found that obtaining well‐crystallized LDHs requires (i) an aging time of 24 h and (ii) a synthesis pH value in the range 8–12. Our results also show that the concentration of the cationic metallic salts has no influence on the structural properties of the LDHs . The use of NH₄OH as alkali for adjusting the pH value during the synthesis favors the formation of nitrated LDH phases while NaOH gives rise to carbonated ones. Moreover, it was found that irrespective of the molar cationic ratio used (between 1 and 5), [Zn‐Al] LDHs could be obtained. The sample synthesized at R = 2 exhibited the best crystallinity.     

Synthesis,Structure, Photoluminescence and Thermal Properties of Sodium Ethene‐Bis‐Nitrobenzenesulfonate

Abstract. Sodium ethene‐bis‐nitrobenzenesulfonate, [Na₂(ENS) · 6H₂O]_n( 1 ) was synthesized through coupling reaction of o‐nitrotoluenesulfonic acid in NaOH solution and characterized by single crystal X‐ray diffraction, elemental analysis, IR and ¹H NMR spectroscopy, XRPD, DSC and TGA (where ENS^2– = ethene‐bis‐nitrobenzenesulfonate). The asymmetrical unit of ( 1 ) consists of two octahedral Na^I ions, and the neighboring metal centers are bridged by μ₂ water molecules resulting in the formation of an inorganic tetranuclear unit. The tetranuclear units were connected through the ENS^2– ligands into a 2D topology net. The weak π–π stacking and H‐bonding interactions further stabilized the structure. The crystals of (C₇H₆NO₅S)^– · (H₅O₂)⁺ ( 2 ) were obtained by post‐processing the unreacted raw material to recycle. Furthermore, the rigidity and the conjugation effect of the aromatic system in compound 1 were increased through the coordination interactions of metal atoms to ligands, resulting in the emission coming from ligand enhanced with red‐shifting about 9 nm of the maximal wavelength. The conjugation effects and the steric arrangement of the substituent groups play the main role to the luminescence intensity and red‐shift effect.     

Peroxidase‐Like Layered Double Hydroxide Nanoflakes for Electrocatalytic Reduction of H2O2

Peroxidase‐like layered double hydroxide (LDH) nanoflakes were synthesized directly and facilely by a one‐pot chemical method, hydrothermal treatment. The as‐prepared LDHs were characterized by transmission electron microscopy, scanning electron microscopy, X‐ray diffraction, Fourier transform IR, and cyclic voltammetry. The functionalized LDHs immobilized on the glassy carbon electrode exhibited a well‐defined pair of redox peaks, excellent electrocatalytic activity toward the reduction of hydrogen peroxide without inhibition of dissolved oxygen and a higher affinity for H₂O₂, just like the peroxidase. The low apparent Michaelis–Menten constant was only 242 μM. The electrochemical response to H₂O₂ shows a linear range of 12–254 μM with the calculated detection limit of 2.3 μM at a signal‐to‐noise ratio of 3. Furthermore, compared with most metal hexacyanoferrates, the peroxidase‐like LDHs are very stable in neutral and alkaline solution. The electrochemical and electrocatalytic behavior of the functionalized LDHs indicate that they may be useful to explore man‐made mimics of enzyme in electrochemical biosensors.     

Transparent,Ultrahigh‐Gas‐Barrier Films with a Brick–Mortar–Sand Structure

Transparent and flexible gas‐barrier materials have shown broad applications in electronics, food, and pharmaceutical preservation. Herein, we report ultrahigh‐gas‐barrier films with a brick–mortar–sand structure fabricated by layer‐by‐layer (LBL) assembly of XAl‐layered double hydroxide (LDH, X=Mg, Ni, Zn, Co) nanoplatelets and polyacrylic acid (PAA) followed by CO₂ infilling, denoted as (XAl‐LDH/PAA)_n‐CO₂. The near‐perfectly parallel orientation of the LDH “brick” creates a long diffusion length to hinder the transmission of gas molecules in the PAA “mortar”. Most significantly, both the experimental studies and theoretical simulations reveal that the chemically adsorbed CO₂ acts like “sand” to fill the free volume at the organic–inorganic interface, which further depresses the diffusion of permeating gas. The strategy presented here provides a new insight into the perception of barrier mechanism, and the (XAl‐LDH/PAA)_n‐CO₂ film is among the best gas barrier films ever reported.     

Intercalation of Sulfanilic Acid‐Phenol‐Formaldehyde Polycondensate into Hydrocalumite Type Layered Double ­Hydroxide

Polycondensates containing sulfonate groups, referred to as concrete superplasticizers, are widely used in the construction industry. A sulfanilic acid–phenol–formaldehyde polycondensate (SPF) with M_w ≈ 100.000 g · mol^–1 was synthesized from sulfanilic acid, phenol and formaldehyde by polycondensation reaction, and its intercalation into hydrocalumite type Layered Double Hydroxide (LDH) was investigated. Preparation was done by rehydration of tricalcium aluminate, a cement constituent, in the presence of the polymer. According to the XRD pattern, SPF was successfully intercalated. A d value of approx. 2.6 nm was found. Elemental composition of the new organo‐mineral phase reveals charge balancing of the cationic LDH main layers by the polycondensate. Thermogravimetry indicates that thermal degradation of intercalated SPF occurs at higher temperature, compared to non‐intercalated SPF. According to SEM imaging, the novel Ca‐Al‐LDH phase exhibits the morphology of intergrown platelets. Ultra‐thin nanosheets (foils) with approx. 50 nm thickness were obtained. The layered structure and d value obtained from diffraction analysis were confirmed by TEM imaging. The new hydride can be used as cement and concrete additive.     

Transparent,Ultrahigh‐Gas‐Barrier Films with a Brick–Mortar–Sand Structure

Transparent and flexible gas‐barrier materials have shown broad applications in electronics, food, and pharmaceutical preservation. Herein, we report ultrahigh‐gas‐barrier films with a brick–mortar–sand structure fabricated by layer‐by‐layer (LBL) assembly of XAl‐layered double hydroxide (LDH, X=Mg, Ni, Zn, Co) nanoplatelets and polyacrylic acid (PAA) followed by CO₂ infilling, denoted as (XAl‐LDH/PAA)_n‐CO₂. The near‐perfectly parallel orientation of the LDH “brick” creates a long diffusion length to hinder the transmission of gas molecules in the PAA “mortar”. Most significantly, both the experimental studies and theoretical simulations reveal that the chemically adsorbed CO₂ acts like “sand” to fill the free volume at the organic–inorganic interface, which further depresses the diffusion of permeating gas. The strategy presented here provides a new insight into the perception of barrier mechanism, and the (XAl‐LDH/PAA)_n‐CO₂ film is among the best gas barrier films ever reported.