Hydrothermal Synthesis of g‐C3N4/NiFe2O4 Nanocomposite and Its Enhanced Photocatalytic Activity

Herein, for the first time, a direct Z‐scheme g‐C₃N₄/NiFe₂O₄ nanocomposite photocatalyst was prepared using facile one‐pot hydrothermal method and characterized using XRD, FT‐IR, DRS, PL, SEM, EDS, TEM, HRTEM, XPS, BET and VSM characterized techniques. The result reveals that the NiFe₂O₄ nanoparticles are loaded on the g‐C₃N₄ sheets successfully. The photocatalytic activities of the as‐prepared photocatalysts were evaluated for the degradation of methyl orange (MO) under visible light irradiation. It was shown that the photocatalytic activity of the g‐C₃N₄/NiFe₂O₄ nanocomposite is about 4.4 and 3 times higher than those of the pristine NiFe₂O₄ and g‐C₃N₄ respectively. The enhanced photocatalytic activity could be ascribed to the formation of g‐C₃N₄/NiFe₂O₄ direct Z‐scheme photocatalyst, which results in efficient space separation of photogenerated charge carriers. More importantly, the as‐prepared Z‐scheme photocatalyst can be recoverable easily from the solution by an external magnetic field and it shows almost the same activity for three consecutive cycles. Considering the simplicity of preparation method, this work will provide new insights into the design of high‐performance magnetic Z‐scheme photocatalysts for organic contaminate removal.     

Ultrathin g‐C3N4 Nanosheets Coupled with AgIO3 as Highly Efficient Heterostructured Photocatalysts for Enhanced Visible‐Light Photocatalytic Activity

The photocatalytic activity of graphite‐like carbon nitride (g‐C₃N₄) could be enhanced by heterojunction strategies through increasing the charge‐separation efficiency. As a surface‐based process, the heterogeneous photocatalytic process would become more efficient if a larger contact region existed in the heterojunction interface. In this work, ultrathin g‐C₃N₄ nanosheets (g‐C₃N₄‐NS) with much larger specific surface areas are employed instead of bulk g‐C₃N₄ (g‐C₃N₄‐B) to prepare AgIO₃/g‐C₃N₄‐NS nanocomposite photocatalysts. By taking advantage of this feature, the as‐prepared composites exhibit remarkable performances for photocatalytic wastewater treatment under visible‐light irradiation. Notably, the optimum photocatalytic activity of AgIO₃/g‐C₃N₄‐NS composites is almost 80.59 and 55.09 times higher than that of pure g‐C₃N₄‐B towards the degradation of rhodamine B and methyl orange pollutants, respectively. Finally, the stability and possible photocatalytic mechanism of the AgIO₃/g‐C₃N₄‐NS system are also investigated.     

Carbonyl‐Grafted g‐C3N4 Porous Nanosheets for Efficient Photocatalytic Hydrogen Evolution

Carbonyl‐grafted g‐C₃N₄ porous nanosheets (COCNPNS) were fabricated by means of a two‐step thermal process using melamine and oxalic acid as starting reagents. The combination of melamine with oxalic acid to form a melamine–oxalic acid supramolecule as a precursor is key to synthesizing carbonyl‐grafted g‐C₃N₄. The bulk carbonyl‐grafted g‐C₃N₄ (COCN) was further thermally etched onto porous nanosheets by O₂ under air. In such a process, the carbonyl groups were partly removed and the obtained sample showed remarkably enhanced visible‐light harvesting and promoted the separation and transfer of photogenerated electrons and holes. With its unique porous structure and enhanced light‐harvesting capability, under visible‐light illumination (λ >420 nm) the prepared COCNPNS exhibited a superior photocatalytic hydrogen evolution rate of 83.6 μmol h⁻¹, which is 26 times that of the p‐CN obtained directly from thermal polycondensation of melamine.     

Ge‐Mediated Modification in Ta3N5 Photoelectrodes with Enhanced Charge Transport for Solar Water Splitting

Ta₃N₅ is a promising photoanode candidate for photoelectrochemical water splitting, with a band gap of about 2.1 eV and a theoretical solar‐to‐hydrogen efficiency as high as 15.9 % under AM 1.5 G 100 mW cm^?2 irradiation. However, the presently achieved highest photocurrent (ca. 7.5 mA cm^?2) on Ta₃N₅ photoelectrodes under AM 1.5 G 100 mW cm^?2 is far from the theoretical maximum (ca. 12.9 mA cm^?2), which is possibly due to serious bulk recombination (poor bulk charge transport and charge separation) in Ta₃N₅ photoelectrodes. In this study, we show that volatilization of intentionally added Ge (5 %) during the synthesis of Ta₃N₅ promotes the electron transport and thereby improves the charge‐separation efficiency in bulk Ta₃N₅ photoanode, which affords a 320 % increase of the highest photocurrent comparing with that of pure Ta₃N₅ photoanode under AM 1.5 G 100 mW cm^?2 simulated sunlight.     

Nitrogen‐Doped Graphitic Porous Carbon Nanosheets Derived from In Situ Formed g‐C3N4 Templates for the Oxygen Reduction Reaction

Heteroatom‐doped carbon materials have been considered as potential substitutes for Pt‐based electrocatalysts for the oxygen reduction reaction (ORR) in alkaline fuel cells. Here we report the synthesis of oxygen‐containing nitrogen‐doped carbon (ONC) nanosheets through the carbonization of a mixture that contained glucose and dicyandiamide (DCDA). In situ formed graphitic carbon nitride (g‐C₃N₄) derived from DCDA provided a nitrogen‐rich template, thereby facilitating the formation of ONC nanosheets. The resultant ONC materials with high nitrogen content, high specific surface areas, and highly mesoporous total volume displayed excellent electrochemical performance, including a similar ORR onset potential, half‐potential, a higher diffusion‐limited current, and excellent tolerance to methanol than that of the commercial Pt/C catalyst, respectively. Moreover, the ONC‐850 nanosheet displayed high long‐term durability even after 1000 cycles as well as a high electron transfer number of 3.92 (4.0 for Pt/C). Additionally, this work provides deeper insight into these materials and a versatile strategy for the synthesis of cost‐effective 2D N‐doped carbon electrocatalysts.     

Enhanced Ethylene Photodegradation Performance of g‐C3N4–Ag3PO4 Composites with Direct Z‐Scheme Configuration

Photocatalytic oxidation of ethylene continues to be a challenge at the frontier of chemistry. In a previous report, a simple Ag₃PO₄ semiconductor material was shown to have strong photooxidative properties and efficiently oxidised water and decomposed organics in aqueous solution under visible‐light illumination. Herein, its effects on the photo‐oxidation of gaseous C₂H₄ were investigated by fabricating graphitic C₃N₄–Ag₃PO₄ composite semiconductors with direct Z‐scheme configuration. It was found that both the ethylene photo‐oxidative activity and the stability of Ag₃PO₄ are considerably improved by fabrication of Z‐scheme composites. Moreover, stable C₂H₄ photo‐oxidation activity could be obtained by treating the composite at 450 °C for 3 h after long‐term operation. From the point of view of environmental pollutant cleanup, the present technique avoids the side reaction of oxidising water and will be valuable for further investigations on both Ag₃PO₄ and CH degradation.     

Amino‐Assisted Anchoring of CsPbBr3 Perovskite Quantum Dots on Porous g‐C3N4 for Enhanced Photocatalytic CO2 Reduction

Halide perovskite quantum dots (QDs) have great potential in photocatalytic applications if their low charge transportation efficiency and chemical instability can be overcome. To circumvent these obstacles, we anchored CsPbBr₃ QDs (CPB) on NH_x‐rich porous g‐C₃N₄ nanosheets (PCN) to construct the composite photocatalysts via N?Br chemical bonding. The 20 CPB‐PCN (20 wt % of QDs) photocatalyst exhibits good stability and an outstanding yield of 149 μmol h^?1 g^?1 in acetonitrile/water for photocatalytic reduction of CO₂ to CO under visible light irradiation, which is around 15 times higher than that of CsPbBr₃ QDs. This study opens up new possibilities of using halide perovskite QDs for photocatalytic application.     

Enhanced Photocatalytic Activity of MIL‐125 by Post‐Synthetic Modification with CrIII and Ag Nanoparticles

NH₂‐MIL‐125, [Ti₈O₈(OH)₄(bdc‐NH₂)₆] (bdc^2?=1,4‐benzene dicarboxylate) is a highly porous metal–organic framework (MOF) that has a band gap lying within the ultraviolet region at about 2.6 eV. The band gap may be reduced by a suitable post‐synthetic modification of the nanochannels using conventional organic chemistry methods. Here, it is shown that the photocatalytic activity of NH₂‐MIL‐125 in the degradation of methylene blue under visible light is remarkably augmented by post‐synthetic modification with acetylacetone followed by Cr^III complexation. The latter metal ion extends the absorption from the ultraviolet to the visible light region (band gap 2.21 eV). The photogenerated holes migrate from the MOF’s valence band to the Cr^III valence band, promoting the separation of holes and electrons and increasing the recombination time. Moreover, it is shown that the MOF’s photocatalytic activity is also much improved by doping with Ag nanoparticles, formed in situ by the reduction of Ag⁺ with the acetylacetonate pendant groups (the resulting MOF band gap is 2.09 eV). Presumably, the Ag nanoparticles are able to accept the MOF’s photogenerated electrons, thus avoiding electron–hole recombination. Both, the Cr‐ and Ag‐bearing materials are stable under photocatalytic conditions. These findings open new avenues for improving the photocatalytic activity of MOFs.     

Size‐Dependent Surface Activity of Rutile and Anatase TiO2 Nanocrystals: Facile Surface Modification and Enhanced Photocatalytic Performance

The size‐dependent surface activity of titania was illustrated through the formation of ultrafine nanocrystals with clean surfaces. It was demonstrated that, when the size of the nanocrystals was small enough, their surface activity could be significantly enhanced, as evidenced by the formation of transparent macroassemblies, their increased dispersity in various solvents, the facile modification of their surface by organic molecules at room temperature, their strong visible‐light absorption through coordination with peroxide, and highly enhanced photocatalytic performance.     

Construction of a 2D Graphene‐Like MoS2/C3N4 Heterojunction with Enhanced Visible‐Light Photocatalytic Activity and Photoelectrochemical Activity

A novel graphene‐like MoS₂/C₃N₄ (GL‐MoS₂/C₃N₄) composite photocatalyst has been synthesized by a facile ethylene glycol (EG)‐assisted solvothermal method. The structure and morphology of this GL‐MoS₂/C₃N₄ photocatalyst have been investigated by a wide range of characterization methods. The results showed that GL‐MoS₂ was uniformly distributed on the surface of GL‐C₃N₄ forming a heterostructure. The obtained composite exhibited strong absorbing ability in the ultraviolet (UV) and visible regions. When irradiated with visible light, the composite photocatalyst showed high activity superior to those of the respective individual components GL‐MoS₂ and GL‐C₃N₄ in the degradation of methyl orange. The enhanced photocatalytic activity of the composite may be attributed to the efficient separation of electron–hole pairs as a result of the matching band potentials between GL‐MoS₂ and GL‐C₃N₄. Furthermore, a photocatalytic mechanism for the composite material has been proposed, and the photocatalytic reaction kinetics has been measured. Moreover, GL‐MoS₂/C₃N₄ could serve as a novel sensor for trace amounts of Cu²⁺ since it exhibited good selectivity for Cu²⁺ detection in water.     

Highly Efficient Low‐Temperature Plasma‐Assisted Modification of TiO2 Nanosheets with Exposed {001} Facets for Enhanced Visible‐Light Photocatalytic Activity

Anatase TiO₂ nanosheets with exposed {001} facets have been controllably modified under non‐thermal dielectric barrier discharge (DBD) plasma with various working gas, including Ar, H₂, and NH₃. The obtained TiO₂ nanosheets possess a unique crystalline core/amorphous shell structure (TiO₂@TiO_2?x), which exhibit the improved visible and near‐infrared light absorption. The types of dopants (oxygen vacancy/surface Ti³⁺/substituted N) in oxygen‐deficient TiO₂ can be tuned by controlling the working gases during plasma discharge. Both surface Ti³⁺ and substituted N were doped into the lattice of TiO₂ through NH₃ plasma discharge, whereas the oxygen vacancy or Ti³⁺ (along with the oxygen vacancy) was obtained after Ar or H₂ plasma treatment. The TiO₂@TiO_2?x from NH₃ plasma with a green color shows the highest photocatalytic activity under visible‐light irradiation compared with the products from Ar plasma or H₂ plasma due to the synergistic effect of reduction and simultaneous nitridation in the NH₃ plasma.     

AgBi(WO4)2: A New Modification Material to Bi2WO6 for Enhanced and Stable Visible‐Light Photocatalyic Performance

In this work, we report a novel AgBi(WO₄)₂–Bi₂WO₆ heterostructure, which was designed and synthesized by using a simple hydrothermal method. Methyl orange was used as a representative dye indicator to evaluate the visible‐light catalytic activity and the catalytic mechanism was investigated. The as‐synthesized AgBi(WO₄)₂–Bi₂WO₆ composite displayed a 43 times higher photocatalytic activity than Bi₂WO₆. Owing to the matched band gap and distinctive heterostructure, AgBi(WO₄)₂–Bi₂WO₆ reveals a high visible‐light response and high‐efficiency utilization of both photogenerated electrons and holes. AgBi(WO₄)₂ reveals a similar energy level to and good lattice match with Bi₂WO₆, which are favorable qualities for band bending and fluent electron transfer. Furthermore, the photoexcited electrons can produce oxygen to generate ^.O₂^? radicals, which is vital for the overall utilization of both holes and electrons. This is the first example of AgBi(WO₄)₂ being used as photocatalytic material.     

trans‐(Cl)‐[Ru(5,5′‐diamide‐2,2′‐bipyridine)(CO)2Cl2]: Synthesis,Structure, and Photocatalytic CO2 Reduction Activity

A series of trans‐(Cl)‐[Ru(L)(CO)₂Cl₂]‐type complexes, in which the ligands L are 2,2′‐bipyridyl derivatives with amide groups at the 5,5′‐positions, are synthesized. The C‐connected amide group bound to the bipyridyl ligand through the carbonyl carbon atom is twisted with respect to the bipyridyl plane, whereas the N‐connected amide group is in the plane. DFT calculations reveal that the twisted structure of the C‐connected amide group raises the level of the LUMO, which results in a negative shift of the first reduction potential (E_p) of the ruthenium complex. The catalytic abilities for CO₂ reduction are evaluated in photoreactions (λ>400 nm) with the ruthenium complexes (the catalyst), [Ru(bpy)₃]²⁺ (bpy=2,2′‐bipyridine; the photosensitizer), and 1‐benzyl‐1,4‐dihydronicotinamide (the electron donor) in CO₂‐saturated N,N‐dimethylacetamide/water. The logarithm of the turnover frequency increases by shifting E_p a negative value until it reaches the reduction potential of the photosensitizer.     

ChemInform Abstract: Electronic Structure of AlO2, AlO2‐, Al3O5, and Al3O5‐ Clusters.

ChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 100 leading journals. To access a ChemInform Abstract of an article which was published elsewhere, please select a “Full Text” option. The original article is trackable via the “References” option.     

Surface Engineering of g‐C3N4 by Stacked BiOBr Sheets Rich in Oxygen Vacancies for Boosting Photocatalytic Performance

BiOBr containing surface oxygen vacancies (OVs) was prepared by a simple solvothermal method and combined with graphitic carbon nitride (g‐C₃N₄) to construct a heterojunction for photocatalytic oxidation of nitric oxide (NO) and reduction of carbon dioxide (CO₂). The formation of the heterojunction enhanced the transfer and separation efficiency of photogenerated carriers. Furthermore, the surface OVs sufficiently exposed catalytically active sites, and enabled capture of photoexcited electrons at the surface of the catalyst. Internal recombination of photogenerated charges was also limited, which contributed to generation of more active oxygen for NO oxidation. Heterojunction and OVs worked together to form a spatial conductive network framework, which achieved 63 % NO removal, 96 % selectivity for carbonaceous products (that is, CO and CH₄). The stability of the catalyst was confirmed by cycling experiments and X‐ray diffraction and transmission electron microscopy after NO removal.     

Enhanced Visible-Light-Driven Photocatalytic Activity by Fe(Ш)-Doped Graphitic C3N4

Fe(Ш)-doped graphitic carbon nitride (Fe(Ш)-CN) photocatalysts with various Fe(Ш) ions content were prepared via ultrasonic method. Detailed physical characterization indicated that Fe(Ш) ions had been successfully doped into the frame of g-C₃N₄. The photocatalytic activities were investigated, and methyl orange (MO) and tetracycline hydrochloride (TC) were used as the targeted pollutants. The as-prepared Fe(Ш)-CN materials exhibited higher photocatalytic activities than those of the pure g-C₃N₄. Specifically, the degradation rate of 2Fe(Ш)-CN under visible light was 2.06 times higher for MO and 2.65 times higher for TC than that of g-C₃N₄. The increased photocatalytic activities of Fe(Ш)-CN were mainly attributed to the enhanced light absorption ability and the rapid separation of photogenerated carriers. Moreover, the importance of active species during the reaction process was also explored, and the results indicated that •O₂⁻ is the main active species.     

In Situ Preparation of a Ti3+ Self‐Doped TiO2 Film with Enhanced Activity as Photoanode by N2H4 Reduction

A new synthetic method to fabricate Ti³⁺‐modified, highly stable TiO₂ photoanodes for H₂O oxidation is reported. With Ti foil as both the conducting substrate and the Ti³⁺/Ti⁴⁺ source, one‐dimensional blue Ti³⁺/TiO₂ crystals were grown by a one‐step hydrothermal reaction. The concentration of Ti³⁺ was further tuned by N₂H₄ reduction, leading to a greater photoelectrocatalytic activity, as evidenced by a high photocurrent density of 0.64 mA cm^?2 at 1.0 V vs RHE under simulated AM 1.5 G illumination. Electron paramagnetic resonance and Mott–Schottky plots reveal that higher charge‐carrier density owing to N₂H₄ reduction contributes to the observed improvement. The generality of this synthesis method was demonstrated by its effectiveness in improving the performance of other types of photoanodes. By integrating the advantages of the 1D TiO₂ architecture with those of Ti³⁺ self‐doping, this work provides a versatile tool toward the fabrication of efficient TiO₂ photoanodes.     

Site‐Selected Doping of Upconversion Luminescent Er3+ into SrTiO3 for Visible‐Light‐Driven Photocatalytic H2 or O2 Evolution

A series of upconversion luminescent erbium‐doped SrTiO₃ (ABO₃‐type) photocatalysts with different initial molar ratios of Sr/Ti have been prepared by a facile polymerized complex method. Er³⁺ ions, which were gradually transferred from the A to the B site with increasing Sr/Ti, enabled the absorption of visible light and the generation of high‐energy excited states populated by upconversion processes. The local internal fields arising from the dipole moments of the distorted BO₆ octahedra promoted energy transfer from the high‐energy excited states of Er³⁺ with B‐site occupancy to the host SrTiO₃ and thus enhanced the band‐to‐band transition of the host SrTiO₃. Consequently, the erbium‐doped SrTiO₃ species with B‐site occupancy showed higher photocatalytic activity than those with A‐site occupancy for visible‐light‐driven H₂ or O₂ evolution in the presence of the corresponding sacrificial reagents. The results generally suggest that the introduction of upconversion luminescent agents into host semiconductors is a promising approach to simultaneously harnessing low‐energy photons and maintaining redox ability for photocatalytic H₂ and O₂ evolution and that the site occupancy of doped elements in ABO₃‐type perovskite oxides greatly determines the photocatalytic activity.