Synthesis of substituted 5H-1,2,3,4,6,7,8,9-octahydrodipyrido-[4,3-b;3′,4′-d]pyrroles by the Pictet-Spengler condensation

N,N,N-Trialkyl-2,5-bis(1-aminoethyl)pyrroles, prepared by the heterocyclization of 1,8-dibromooctan-3,6-dione with aliphatic amines, underwent the Pictet-Spengler reaction with formaldehyde and aromatic aldehydes to give substituted 5H-1,2,3,4,6,7,8,9-octahydrodipyrido[4,3-b;3,4-d]pyrroles.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 5, 617–622, May, 2000.     

A facile synthesis of 2-ethynylpyrroles by ButOK-assisted room temperature deprotection of 2-(acylethynyl)pyrroles

Available N-substituted 2-(acylethynyl)pyrroles undergo room temperature deprotection in the Bu^tOK/THF system to give 2-ethynylpyrroles in 82–92% yields. Quantum-chemical calculations (B2PLYP/6-311G**//B3LYP/6-311G**+C-PCM/THF) show that the cleavage of ethynyl–acyl bond via the proton transfer from Bu^tOK with formation of potassium acylate and 2-methylpropene is thermo-dynamically much more preferred compared to alternative nucleophilic attack of tert-butoxide anion at the acyl carbon (ΔG = –35.1 vs. –2.7 kcal mol^-1).     

Synthesis of 4-hetaryl-5,6-(2,5-dimethyl-3-thienyl)-2-phenyl-4h-thiazines and investigation of their photochromism

The polar [4+2] cycloaddition reaction of 1,2-bis(2,5-dimethyl-3-thienyl)acetylene with thiobenzamide and certain aldehydes of the thiophene and furan series catalyzed by boron trifluoride etherate gives the corresponding 4-hetaryl-5,6-di(2,5-dimethyl-3-thienyl)-2-phenyl-4H-1,3-thiazines. The photochromic properties of the products have been studied.__________Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 1, pp. 100–106, January, 2005.     

Reaction of MeO2C(H)C=C=C(H)CO2Me with Ru3(CO)12. New diruthenium complexes with bridging carboxylate-substituted allene ligands

The reaction of Ru₃(CO)₁₂ with MeO₂C(H)C=C=C(H)CO₂ Me has yielded two isomeric productsanti-Ru₂(CO)₆[μ-η ³-η ¹-MeO₂C(H)CCC(H)CO₂Me],1 in 70% yield andsyn-Ru₂(CO)₆[μ-η ³-η ¹-MeO₂C(H)CCC(H)CO₂Me],2 in 5% yield. Both compounds were characterized by single crystal X-ray diffraction analysis. Both products are diruthenium complexes with bridging di(carboxylate)allene ligands in which the oxygen atom of the carbonyl group of one of the carboxylate groupings is coordinated to one of the metal atoms. Compound1 isomerizes partially to2 at 68°C. Crystal Data for1: space group=P2₁/n,a=11.131(1) Å,b=10.228(2) Å,c=15.978(2) Å,β=102.01(1)°,Z=4, 1653 reflections,R=0.025; for2: space group=P $\bar 1$ ,a=9.340(1) Å,b=14.925(4) Å,c=6.778(2) Å,α=99-02(2)°,β=104 62(2)°,γ=94.58(2)°,Z=2, 1857 reflections,R=0.027.     

Synthesis of three new 1‐(2,6‐diisopropylphenyl)‐2,5‐di(2‐thienyl) pyrrole‐based donor polymers and their bulk heterojunction solar cell applications

A series of three new 1‐(2,6‐diisopropylphenyl)‐2,5‐di(2‐thienyl)pyrrole‐based polymers such as poly[1‐(2,6‐diisopropylphenyl)‐2,5‐di(2‐thienyl)pyrrole] ( PTPT ), poly[1,4‐(2,5‐bis(octyloxy)phenylene)‐alt‐5,5'‐(1‐(2,6‐diisopropylphenyl)‐2,5‐di(2‐thienyl)pyrrole)] ( PPTPT ), and poly[2,5‐(3‐octylthiophene)‐alt‐5,5'‐(1‐(2,6‐diisopropylphenyl)‐2,5‐di(2‐thienyl)pyrrole)] ( PTTPT ) were synthesized and characterized. The new polymers were readily soluble in common organic solvents and the thermogravimetric analysis showed that the three polymers are thermally stable with the 5% degradation temperature >379 °C. The absorption maxima of the polymers were 478, 483, and 485 nm in thin film and the optical band gaps calculated from the onset wavelength of the optical absorption were 2.15, 2.20, and 2.13 eV, respectively. Each of the polymers was investigated as an electron donor blending with PC₇₀BM as an electron acceptor in bulk heterojunction (BHJ) solar cells. BHJ solar cells were fabricated in ITO/PEDOT:PSS/polymer:PC₇₀BM/TiO_x/Al configurations. The BHJ solar cell with PPTPT :PC₇₀BM (1:5 wt %) showed the power conversion efficiency (PCE) of 1.35% (J_sc = 7.41 mA/cm², V_oc = 0.56 V, FF = 33%), measured using AM 1.5G solar simulator at 100 mW/cm² light illumination. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Metal–organic supramolecular assemblies generated from bismuth(III) bromide and polyimine ligands

Three new BiBr₃ supramolecular complexes, [Bi₂(3-bpdb)₂Br₈]·(3-H₂bpdb) (1), [Bi₂(3-Hbpdh)₂Br₈] (2) and [Bi₂(4-bpdh)Br₉]·3(4-Hbpdh) (3) {3-bpdb = 1,4-bis(3-pyridyl)-2,3-diaza-1,3-butadiene, 3-bpdh = 2,5-bis(3-pyridyl)-3,4-diaza-2,4-hexadiene and 4-bpdh = 2,5-bis(4-pyridyl)-3,4-diaza-2,4-hexadiene} were prepared by the reaction of bismuth(III) bromide with three organic nitrogen donor based ligands under thermal gradient conditions using the branched tube method. All three compounds were structurally characterized by single-crystal X-ray diffraction. In complex 1 the bismuth atoms are coordinated by one pyridyl nitrogen atom of the 3-bpdb ligand and are bridged by two bromide atoms to produce a dimeric complex. Compound 2 consists of dimeric units and the bismuth atoms are linked by one nitrogen atom of the 3-Hbpdh ligand and by five bromide atoms, and can be considered to be six-coordinate with a Br₅N array of donor atoms. The single-crystal X-ray data of compounds 1 and 3 show that the compounds contain two anionic and cationic 1D chains, [3-H₂bpdb]²⁺[Bi₂(3-bpdb)₂Br₈]²⁻ and 3[4-Hbpdh]⁺[Bi₂(4-bpdh)Br₉]³⁻. In all three compounds extensive hydrogen-bonding interactions produce supramolecular networks. The thermal stabilities of compounds 1–3 were studied by thermal gravimetric (TG) and differential thermal analyses (DTA).     

Spectroscopic,thermal and structural studies of a new mercury(II) one-dimensional coordination polymer, [Hg(3-bpo)2(SCN)2], 3-bpo = 2,5- bis (3-pyridyl)-1,3,4-oxadiazole

A new mercury(II)-organic polymeric complex generated from 2,5-bis(3-pyridyl)-1,3,4-oxadiazole (3-bpo) as an angular dipyridyl derivative ligand, [Hg(3-bpo)₂(SCN)₂], was prepared from reactions of ligand 3-bpo with mercury(II) thiocyanate. The compound was characterized by elemental analysis, IR-, ¹H NMR-, ¹³C NMR-spectroscopy and structurally determined by X-ray single crystal diffraction. The thermal stability of [Hg(3-bpo)₂(SCN)₂] was studied by thermal gravimetric (TG) and differential thermal analyses (DTA).     

A one-flask synthesis and characterization of novel symmetrical pyridyl monoselenides and X-ray crystal structure of bis(5-bromo-2-pyridyl) selenide and bis(2-bromo-5-pyridyl) selenide

The present work reports an efficient one-pot synthesis of symmetrical pyridyl monoselenides by the reaction of bromo-/iodopyridines with the isopropylmagnesium chloride, ⁱPrMgCl followed by quenching with selenyl chloride, SeCl₂. The current methodology constitutes a convenient synthesis of bis(5-bromo-2-pyridyl) selenide (I), bis(2-bromo-5-pyridyl) selenide (II) and bis(2,5-dibromo-3-pyridyl) selenide (III) under cryogenic conditions requiring shorter time duration to give satisfactory yields. The hitherto unknown compounds have been characterized by elemental analysis and various spectroscopic techniques i.e., ¹H NMR, ¹³C NMR, FT-IR, mass spectrometry and X-ray crystallography.     

Structural studies of Cu(II) binding to the novel peptidyl derivative of quinoxaline: N-(3-(2,3-di(pyridin-2-yl)quinoxalin-6-yl)alanyl)glycine

The coordination properties of the novel conjugate towards copper ions were investigated. The performed studies exhibited the unusual binding properties of the ligand molecule having two potential strong coordination sites, namely dipeptidic chain and pyridyl nitrogens. On the basis of potentiometric and spectroscopic studies the binding at the low pH values to the aromatic entity is suggested, while the rise of pH (including physiological one) yielded the dimeric head-to-tail complex formation. This stable species possesses three nitrogen donors involved in Cu(II) chelation: N(pirydyl), NH₂ and N⁻(amide).     

13,17,53,57-Tetraphenyl-13,17,53,57-tetrathio-3,7-dithia-1,5(1,5)-di(1,5-diaza-3,7-diphosphacyclooctana)-2,4,6,8(1,4)-tetrabenzenacyclooctaphane with an unusual conical-like conformation

1³,1⁷,5³,5⁷-tetraphenyl-1³,1⁷,5³,5⁷-tetrathio-3,7-dithia-1,5(1,5)-di(1,5-diaza-3,7-diphosphacyclooctana)-2,4,6,8(1,4)-tetrabenzenacyclooctaphane 2b was obtained by sulfurization of the corresponding macrocyclic tetraphosphine 1b. The structure of the inclusion complex of tetrasulfide 2b with DMF was investigated by the X-ray crystal structure analysis. A novel for this type of cyclophanes and relatively rare conical-like conformation of the macrocycle was found. A methyl group from one of the solvating DMF molecules penetrates the macrocyclic cavity of 2b from the side of the wider rim. According to quantum-chemical simulations, this may be the reason of the unusual conical conformation of 2b because the cavity of the macrocycles of this type is highly flexible. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Synthesis and Characterization of a Novel Poly(aryl ether) Containing 4-Chloro-2,5-diphenyloxazole

4-Chloro-2,5-bis(4-fluorophenyl)oxazole monomer has successfully been synthesized using cyclization reaction of 4-fluorobenzoyl cyanide with 4-fluorobenzaldehyde. This monomer was converted to poly(aryl ether)s by nucleophilic substitution of the fluorine atoms on the benzene rings of oxazole monomer with bisphenol A. The influence of the reaction time on the molecular weight had been investigated. The polymers were identified by FT-IR,¹H-NMR and TGA. The products exhibited weight-average molar masses up to 2.81 x 10⁴g mol⁻¹ in GPC. These poly(aryl ether)s showed very high thermal stability up to 363 °C for 5 % weight loss in TGA under N₂.     

Cobalt(II)-selective membrane electrode based on N,N′-di(thiazol-2-yl)formimidamide

A new PVC-membrane electrode for Co²⁺ ions based on N,N′-di(thiazol-2-yl)formimidamide (TF) as membrane carrier has been developed. The electrode resulted in Nernstian response (29.5?±?0.4?mV decade^?1) for Co²⁺ ion over a wide concentration range (2.5?×?10^?7 ?1.0?×?10^?1?M) with a detection limit of 6.1?×?10^?8?M. The sensor has a response time of about 10?s, and can be used for at least 2 months without observing any deviation from the Nernstain response. The electrode revealed good selectivity towards cobalt(II) ion over a wide variety of alkali, alkaline earth, transition, and heavy metal ions and could be used in the pH range 2.0–7.0. The electrode was used for determination of Co²⁺ in real samples.     

Synthesis and Characterization of New Schiff Bases 2-(2-(2-(Aryl)Methyleneamino)Phenylthio) Ethylthio)-N-((aryl)Methylene)Benzeneamine

A series of Schiff bases containing four to six coordination sites N₂S₂ X₂(X = O,N) 2-(2-(2-(aryl)methyleneamino)phenylthio)ethylthio)-N-((aryl)methylene)benzeneamine (2c–f) were prepared from the reaction of 1,2-di(2-aminophenylthio)ethane (1) with aromatic aldehydes. All compounds were characterized by means IR, mass, ¹H and ¹³C NMR spectroscopy, and elemental analysis, and in the case of 2b with a single crystal X-ray diffraction. The X-ray crystal structure of 2b showed that the resonance occurs between aromatic rings, through the C=N bonds of the molecule.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Rapid and Efficient Synthesis of 3,3-Di(1H-indol-3-yl)indolin-2-ones and 2,2-Di(1H-indol-3-yl)-2H-acenaphthen-1-ones Catalyzed by p-TSA

An efficient synthesis of 3,3-di(1H-indol-3-yl)indolin-2-ones and 2,2-di(1H-indol-3-yl)-2H-acenaphthen-1-ones via a reaction of various isatins or acenaphthenequinone with indoles in the presence of p-methylbenzene sulfonic acid (p-TSA) in CH₂Cl₂ at room temperature is described. The advantages of this method include good reaction yield, simple workup procedure, and mild reaction condition.     

Structure and electrical conductivity of ion-implanted rigid-rod and ladder polymers

Isotropic and oriented thin films of rigid-rod, rigid-rod pseudo-ladder, and ladder polymers were ion-bombarded with ⁸⁴Kr⁺ to a dose of 4 × 10¹⁶ ions/cm². The bombardment was conducted at two conditions: one at 190 keV energy with 0.12 μA/cm² current density and the other at 200 keV energy with 2.0 μA/cm² current density. With the low current density, the polymers developed a uniform ion-bombarded layer of about 0.35 μm at the surface. This layer showed an electrical conductivity on the order of 10^?3s/cm at ambient conditions, an enhancement of 6 to 9 orders of magnitude from the pristine polymers. The enhanced conductivity was found to decrease to 10^?6s/cm after the implanted krypton was removed by heating under reduced pressure. It suggests that the enhanced conductivity was due to a synergistic effect of structural change of the polymers and chemical doping by the im-planted ions. With the high current density, most polymer films, except that of rigid-rod pseudo-ladder poly(p-(2,5-dihydroxy) phenylene benzobisthiazole) (DPBT), developed an additional fibrous network structure over the uniform ion-bombarded layer. The comparable conductivity, 53 to 157 s/cm, measured for the various ion-bombarded films in-dicated that neither the molecular structure, rigid-rod or ladder, nor the molecular packing order, isotropic or oriented, constituted significant effect on the conductivity of ion-bombarded polymers. Since krypton could not be detected in the polymers ion-bombarded with high current density, the enhanced conductivity was attributed to the structural change of the polymers. The DPBT films ion-bombarded with high current density showed holes of micron size, probably due to the decomposition of hydroxy pendents from the rigid-rod backbone. © 1993 John Wiley & Sons, Inc.     

Synthesis, Structure and Photophysical Properties of Silole-Oxadiazole Copolymers

A new conjugated copolymer (PTST‐DyOXD) derived from 1,1‐dimethyl‐3,4‐diphenyl‐2,5‐bis(5‐bromo‐2‐thienyl)‐silole (TST) and 2,5‐bis(4‐ethynylphenyl)‐1,3,4‐oxadiazole (DyOXD) was synthesized by Pd(0)‐catalyzed Sonogashira coupling reaction. For comparison, another copolymer without acetenyl group (PTST‐OXD) was also synthesized by Pd(0)‐catalyzed Suzuki coupling reaction. Chemical structures and optoelectronic properties of the copolymers were characterized by ¹H NMR, ¹³C NMR, IR, UV‐vis absorption, photoluminescence and cyclic voltammetry. The number‐average molecular weight (M_n) is 4010 Da for PTST‐DyOXD and 3890 Da for PTST‐OXD, respectively. The thermogravimetric analysis (TGA) measurements show that they have good thermal stability with decomposition temperature at 312 and 318°C, respectively. The optical band gap is 2.21 eV for PTST‐DyOXD and 2.10 eV for PTST‐OXD based on the absorption onset. CV analysis revealed the LUMO level of PTST‐DyOXD is ?3.04 eV, lower than that of PTST‐OXD (about ?2.89 eV), which is attributed to the introduction of acetylene group in PTST‐DyOXD, increasing the system of the conjugate chain length.     

Efficient synthesis of 1-R1-2-R-4,5-di(furan-2-yl)-1H-imidazoles and their luminescence properties

In this study, a series of 1-R₁-2-R-4,5-di(furan-2-yl)-1H-imidazole derivatives were synthesized in better yield 59.0%∼89.8% by the treatment of purified imidazole compounds with benzyl chloride or allyl chloride in the presence of sodium hydride, and were characterized by FT–IR, HRMS, ¹H NMR and ¹³C NMR spectroscopy. Furthermore, the luminescence properties of the synthesized products were investigated. It was found that N-substituted groups of imidazole have little influence on the absorption bands in a 0.1 N H₂SO₄ aqueous solution containing 0.5 mL of dissolved CH₃OH. However, the emission of some compounds in solution was sensitive to the polarity of the solvents.     

Structural optimization of thiophene-(N-aryl)pyrrole-thiophene-based metal-free organic sensitizer for the enhanced dye-sensitized solar cell performance

In this study, we prepared thiophene-(N-aryl)pyrrole-thiophene (TPT)-based two new metal-free organic sensitizers (TPTDYE 2 and TPTDYE 3) with the aim of improving the dye-sensitized solar cell (DSSC) performance of recently reported TPT-based organic sensitizer (TPTDYE 1). The molecular structure of TPTDYE 1 was tuned by decreasing the distance between the donor and acceptor groups (TPTDYE 2) or by introducing a fluoride atom on the phenyl ring near to the electron accepting cyanoacrylic acid group (TPTDYE 3). The photophysical and electrochemical studies of the newly synthesized sensitizers revealed that their absorption and energy levels were significantly altered compared to those of TPTDYE 1. The DSSC performance of each of sensitizers TPTDYE 2 and TPTDYE 3 was investigated with and without coadsorbent and compared with those of TPTDYE 1 and standard N719. Between the two DSSCs, the one sensitized by TPTDYE 2 offered greatly improved solar to electrical energy conversion efficiency of 6.85% without coadsorbent and 7.06% with coadsorbent. The overall conversion efficiency of the DSSC sensitized by TPTDYE 2 without and with coadsorbent was found to be improved by 32% and 20%, respectively, compared with that of the DSSC sensitized by TPTDYE 1 and almost equal (98.7%) to that of the standard cell prepared from N719 under an identical condition.     

Bifunctionalized allenes. Part XXI. Electrophilic cyclization and addition reactions of 3-(α- or β-hydroxyalkyl)-allenylphosphonates and allenyl phosphine oxides

Abstract

The present paper discusses the electrophilic cyclization and addition reactions of 3-(α- or β-hydroxyalkyl)-allenylphosphonates and phosphine oxides. Treatment of 3-(α- or β-hydroxy-alkyl)-allenylphosphonates with electrophiles takes place with 5-endo-trig cyclization and gives 2-methoxy-2,5-dihydro-1,2-oxaphosphole 2-oxides as a result of the neighboring phosphonate group participation in the electrophilic cyclization. On the other hand, 3-(α- or β-hydroxyalkyl)-alk-(1E)-en-1-yl phosphine oxides were prepared by chemo-, regio-, and stereoselective electrophilic addition to the C²-C³-double bond in the 3-(α- or β-hydroxyalkyl)-alka-1,2-dienyl phosphine oxides and subsequent attack of the external nucleophile (halide anion). The paper proposes a possible mechanism that involves electrophilic cyclization and addition reactions of the phosphorylated (α- or β-hydroxyalkyl)allenes.     

蝶形主体分子的设计、合成及其包结性能的研究

设计、合成了两种蝶形主体分子：2，5－二（三苯甲基）对苯二酚1，2，5－二（二苯甲基）对苯二酚2.1和2可与许多有机小分子形成配位包合物。用IR表征了主体分子1和2 的包结物， 用¹H NMR测定了主客体分子的摩尔比：1•DMF (1：2)，1•DMSO (1:2)，1 •吡啶 （1：2），1•环戊酮 （2：3）和2•DMF 1：2），2•DMSO （1：2），2 •THF （1：1），2•苯甲醛（1：2），2•苯乙酮 （1：2），2•2，5－己二酮 （1：1），2 •N－甲基－2－吡咯烷酮 （1：3）。单晶X-射线衍射分析了包结物2·苯甲醛的晶体结构，在分子间氢键的相互作用下晶体得以稳定。