A new luminol chemiluminescence reaction using a tetravalent nickel-periodate complex as the oxidant

A modified sequential extraction procedure was developed and applied to characterize the species of metals in fly ash. Two fly ash samples were collected from a coal-fired thermal power plant located in the north of China. A sample was collected from the conventional pulverized coal (PC) combustor and another from the circulating fluidized bed (CFB) combustor. After extraction by the proposed sequential extraction procedure, the elements in the fly ash samples were divided into a water-extractable fraction (F1), an acid-soluble fraction (F2), a reducible fraction (F3), an oxidizable fraction (F4) and a residual fraction (F5). Except for Cu, V, Cd in the PC sample and V, Zn in the CFB sample, most of the other metals were present in the residual fraction (F5), which was very difficult to release into the environment. The fraction distribution patterns in the two samples were also compared. The results indicated that the distribution of metals in different fractions in fly ash samples were probably impacted by different combustion processes.     

Artifacts in the Determination of Trace Metal Binding Forms in Anoxic Sediments by Sequential Extraction

Abstract

The binding forms of Co, Cd, Cu, Pb, and Zn in an anoxic, sulfide-bearing sediment were investigated by performing both thermodynamic equilibrium calculations and sequential extractions. Care was taken to maintain oxygen-free conditions during the whole experiment. The calculations suggested that trace metals were bound to sulfidic minerals. Sequential extraction results, however, showed increased importance of exchangeable and reducible fractions in the order Cu < Cd < Pb < Zn < Co. Thermodynamic equilibrium calculations of the chemical reactions during extraction showed that Cd, Co, Pb, and Zn sulfides are to a significant extent soluble in the acetate-exchangeable (step 1 + 2) and oxalate-reducible (step 3) fractions. Neglecting the dissolution of sulfide minerals would lead to a misinterpretation of the experimental results.     

The utilization of modified BCR three-step sequential extraction procedure for the fractionation of Cd, Cr, Cu, Ni, Pb and Zn in soil reference materials of different origins

A modified three-step sequential extraction procedure for the fractionation of heavy metals, proposed by the Commission of the European Communities Bureau of Reference (BCR) has been applied to the Slovak reference materials of soils (soil orthic luvisols, soil rendzina and soil eutric cambisol), which represent pedologically different types of soils in Slovakia. Analyses were carried out by flame or electrothermal atomic absorption spectrometry (FAAS or ETAAS). The fractions extracted were: exchangeable (extraction step 1), reducible-iron/manganese oxides (extraction step 2), oxidizable-organic matter and sulfides (extraction step 3). The sum of the element contents in the three fractions plus aqua-regia extractable content of the residue was compared to the aqua-regia extractable content of the elements in the origin soils. The accuracy obtained by comparing the determined contents of the elements with certified values, using BCR CRM 701, certified for the extractable contents (mass fractions) of Cd, Cr, Cu, Ni, Pb and Zn in sediment following a modified BCR-three step sequential extraction procedure, was found to be satisfactory.     

海湾河口表层沉积物中重金属形态连续萃取方法的优化研究

采用单一萃取程序对建立的重金属形态连续萃取方法的萃取条件进行优化.分别以Ca和Mg、Fe、有机质(OM)和酸可挥发性硫(AVS)作为萃取剂释放酸溶态、还原态、有机质结合态和硫化物结合态等重金属目标形态的表征参量,考察萃取剂对相应目标形态的萃取能力和选择性.分别根据表征参量和重金属在萃取溶液中的含量变化确定最优萃取时间和萃取样液比.结果表明,优化萃取条件后,萃取剂对目标形态重金属均有很强的释放能力.酸溶态萃取剂对其它非残留态影响很小;还原态萃取剂除对酸溶态有少量提取外,对其它形态影响较小;有机质结合态萃取剂对硫化物结合态有少量萃取,对其它形态影响较小.硫化物结合态在酸溶态、还原态和有机质结合态之后萃取,避免了对这三种形态的影响.优化后的连续萃取方法对重金属形态有较好的选择性,可对海湾和河口表层沉积物中重金属的目标形态进行较为合理地分离和评价.     

Leaching Studies of Inorganic and Organic Compounds from Fly Ash

Fly ash is produced in massive quantities by fossil fuel based power plants and waste incinerators, and contains high levels of potentially toxic chemicals. Various leaching tests exist to determine the available fractions, but the outcome is strongly dependent on the experimental conditions, and these have not yet been harmonised at the international level. In order to test existing protocols for heavy metals, several intercomparisons were organised within the framework of an EU-INCO project "ANALEACH", in which seven institutes from five countries participated. Two existing reference materials were made available for the project and test batches of two new fly ash reference materials were produced. Availability tests, leaching tests and pH-stat tests were studied and critical steps in the procedures were identified. Fly ashes can also contain large amounts of inorganic sulphur and nitrogen compounds, and the determination and leaching behaviour of these compounds were also studied. In one intercomparison for metals, inorganic S and N-compounds were also included. A five-step leaching test was optimised for fly ash in order to link metal fractions to different types of binding. Column leaching experiments were carried out to investigate leaching from fly ash into soil, mimicking the effects of (acid) rain on fly ash deposited on topsoil after atmospheric transport. The major fraction of the leached metal ions was retained by the soil. Also large numbers of organic compounds (including many toxic ones) were identified in fly ash extracts, especially in city waste incinerator ash. Leaching procedures based on ultrasonic extraction were developed for organic compounds and an intercomparison exercise was organised. In a field study at the river Nitra(Slovakia) numerous organic pollutants were found at elevated levels downstream from a major fly ash dump site.     

Comparison of three sequential extraction procedures used to study trace metal distribution in an acidic sandy soil

On an acid sandy soil contaminated with trace metals (Fe, Mn, Cu, Pb and Zn), three sequential extraction procedures were compared to determine the efficiency of the reagents used and the effects of the step order on the fractionation of metal species. In all cases, a magnesium nitrate solution (MgNIT) was previously used to extract exchangeable forms. In the first procedure (I), the next extraction step was performed with sodium acetate buffer (NaOAc), as used on calcareous soils, to dissolve active calcium carbonate. Then trace metals bound to different forms of oxi-hydroxides (NH(2)OH, TAMOx and TAMAs fractions) were extracted before organic matter/sulfide oxidation with hydrogen peroxide at pH 2.0 in nitric acid medium (OMHyd). Finally, residual bound metals (RESID) in each procedure were extracted with a nitric-hydrofluoric-perchloric acid mixture. The second procedure (II) was the same as I, but without the NaOAc step, because of the absence of carbonate in the study soil. In procedure III, the NaOAc step was omitted and the oxidizable organic/sulfide fraction was extracted with sodium hypochlorite at pH 8.5 (OMOCl) before the reducible fractions. This study first showed that NaOAc may remove considerable amounts of metals (especially Mn and Zn) in other forms than exchangeable ones. Procedures II and III give similar results for Fe, Mn and Zn forms, which were mainly found in fractions of inorganic soil components, but not for Cu and Pb. Copper distribution was affected by the position of the oxidation step in the sequence. In procedure II, where the oxidation step (OMHyd) ended the sequence, Cu was mainly recovered in the TAMOx fraction. However, in procedure III, where the oxidation step (OMOCl) preceded the NH(2)OH, TAMOx and TAMAs steps, Cu was found in both OMOCl and TAMOx fractions. Lead distribution varied with oxidation reagent: it was partly removed in the OMHyd fraction of procedures I and II, and to a much lower extent in the OMOCl fraction of procedure III, probably due to the alkaline pH of the reagent in the latter case.     

Utilization of optimized BCR three-step sequential and dilute HCl single extraction procedures for soil-plant metal transfer predictions in contaminated lands

The prediction of soil metal phytoavailability using the chemical extractions is a conventional approach routinely used in soil testing. The adequacy of such soil tests for this purpose is commonly assessed through a comparison of extraction results with metal contents in relevant plants. In this work, the fractions of selected risk metals (Al, As, Cd, Cu, Fe, Mn, Ni, Pb, Zn) that can be taken up by various plants were obtained by optimized BCR (Community Bureau of Reference) three-step sequential extraction procedure (SEP) and by single 0.5 mol L(-1) HCl extraction. These procedures were validated using five soil and sediment reference materials (SRM 2710, SRM 2711, CRM 483, CRM 701, SRM RTH 912) and applied to significantly different acidified soils for the fractionation of studied metals. The new indicative values of Al, Cd, Cu, Fe, Mn, P, Pb and Zn fractional concentrations for these reference materials were obtained by the dilute HCl single extraction. The influence of various soil genesis, content of essential elements (Ca, Mg, K, P) and different anthropogenic sources of acidification on extraction yields of individual risk metal fractions was investigated. The concentrations of studied elements were determined by atomic spectrometry methods (flame, graphite furnace and hydride generation atomic absorption spectrometry and inductively coupled plasma optical emission spectrometry). It can be concluded that the data of extraction yields from first BCR SEP acid extractable step and soil-plant transfer coefficients can be applied to the prediction of qualitative mobility of selected risk metals in different soil systems.     

Distribution of heavy metals of agricultural soils of central Greece using the modified BCR sequential extraction method

The state of heavy metal (Cd, Cu, Ni, Zn, Pb, and Cr) pollution was studied, in 440 texturally different soil profiles in Thessaly, an intensely cultivated region in Central Greece. The study was carried out in 2004 and 2005 on 220 soil samples for each year. Soil samples were classified in three soil orders: Endisols, Alfisols, and Vertisols according to the Soil Taxonomy System. The pseudo-total concentrations of heavy metals were determined by the aqua regia procedure. Heavy metals were also determined after division into four fractions by sequential extraction with (a) acetic acid (exchangeable and specifically adsorbed metals), (b) a reducing agent (bound to Fe/Mn hydroxides), (c) an oxidizing agent (bound to soil organic matter), and (d) aqua regia (bound to mineral structures, residual). The concentrations of all the metals studied were higher in the topsoil (0–30?cm) and lower in the second soil layer (30–60?cm). Concentrations of 70–82% of Cd, 39–64% of Cu, 41–69% of Ni, 29–51% of Zn, 75–89% of Pb, and 52–87% of Cr were found in the first two fractions. Cd appeared to be the most mobile of the metals studied, while Cu and Zn were found in forms associated with soil organic matter. The chemical partitioning patterns of Pb and Cr indicated that these metals are largely associated with the Fe–Mn hydroxides, while Cr was also found in the residual fractions. Significant correlations between heavy metals fractions and soil physicochemical parameters were obtained and discussed.     

Fractionation of heavy metals in sediment by using microwave assisted sequential extraction procedure and determination by inductively coupled plasma mass spectrometry

In this work, a fast microwave assisted extraction procedure was developed and optimized for the heavy metals (Cu, Ni, Cr, Pb and Cd) partitioning in the three-stage sequential extraction procedure proposed by the European Standards, Measurements and Testing (SM&;T) Program, formerly the Community Bureau of Reference (BCR). The microwave oven procedure was optimized to obtain extraction efficiencies similar to the conventional BCR procedure, in less time, while using smaller volumes of reagents. In the optimization process, three variables (extraction time, ramping time and microwave power) were considered as factors and as a response the concentration of different metal ions in each individual BCR fraction. Interactions between analytical factors and their optimized levels were investigated using a central composite design. Extractable metals obtained by both comparable methodologies were measured by inductively coupled plasma mass spectrometry. With the use of optimal microwave conditions, steps 1–3 of the sequential extraction (including the hydrogen peroxide digestion in step 3) could be completed between 21 and 22 min. Detection limits were between 1 and 18 ng l^{− 1}. The accuracy of the proposed method was checked with a certified reference material (CRM) of Lake Sediment BCR 701. Values obtained were in accordance with those reported for the certified material with only a few exceptions. Different origin sediments (river and marine) were analyzed by both BCR and MW procedures, and the results obtained were comparable according to the t-paired-test for a 95% confidence level.     

Evaluation of a mixed chelator as heavy metal stabilizer for municipal solid‐waste incineration fly ash: Behaviors and mechanisms

This paper compares the stabilization performances of three dithiocarbamate and three phosphate chemical stabilizing agents, selects the best agents from each group, combines them as a mixed heavy metal stabilizer for municipal solid‐waste incineration (MSWI) fly ash, and investigates the effectiveness of the mixed chelator in stabilizing heavy metals in MSWI fly ash from southwest China. The mechanism of stabilization is also analyzed. Results indicate that piperazine dithiocarbamate can stabilize Cd, Cu, and Ni effectively, while sodium dihydrogen phosphate can stabilize Pb better. With the addition of the mixed chelator (2% sodium dihydrogen phosphate and 1% piperazine dithiocarbamate), all the targeted heavy metal concentrations in the leachate were below the standards for pollution control on municipal solid waste landfill sites in China. The stabilizing agents combined with the heavy metals in fly ash could not generate insoluble crystals; however, the heavy metals could combine with the agents' effective groups, generating flocs in the pores or on the surfaces of the fly ash and offering significant densification. The mixed chelator could transfer heavy metals from unstable fractions to stable fractions, so the leaching of heavy metals from the fly ash was greatly decreased.     

A rapid fractionation method for heavy metals in soil by continuous-flow sequential extraction assisted by focused microwaves

A microwave-assisted continuous-flow sequential extraction system was developed for rapid fractionation analysis of heavy metals in soil. Insertion of pressure-adjusted air between the extractants provided stable flows of the extractants without mutual mixing and back-pressure influence of a column packed with soil, thereby facilitating reliable continuous-flow extractions. In addition, use of pure water as a pumping solvent removed metal contamination because of direct contact between corrosive extractants and the pump containing metallic materials. Focused microwave irradiation to the soil accelerated the selective extractions of the acid-soluble and reducible fractions of heavy metals in soil in the first and second steps of the sequential extraction conditions, as defined by the Commission of the European Bureau of Reference (BCR). The microwave-assisted continuous-flow extraction provided high correlations in amounts of six heavy metals except Zn in the first step and Cu in the second step extracted from a reference sludge soil, BCR CRM 483, with a conventional batchwise extraction proposed by BCR; continuous-flow extraction assisted by conductive heating provided lower correlations for all the six metals. The proposed method drastically reduced the time required for the sequence extraction to ca. 65 min without losing accuracy and precision of the fractionation analysis of heavy metals in soil, whereas the BCR batchwise method requires ca. 33 h. An erratum to this article can be found at     

垃圾焚烧中氯化物对重金属Pb迁移转化特性的影响

采用管式炉和模拟垃圾对垃圾中氯化物对重金属Pb迁移转化特性的影响进行了研究,使用ICP-AES(美国EPA消解方法)、SEM、EDS和XRD等对重金属浓度、灰渣表面形貌、成分和灰渣X射线衍射物相等进行了分析。结果表明,氯化物含量的增加使得Pb生成更多易挥发性物质,从而向飞灰迁移分布,但有机氯PVC的影响比无机氯NaCl的大。无机氯NaCl和有机氯PVC对焚烧中Pb迁移转化作用机理不同,NaCl易与Pb反应生成PbCl2,而PVC与Pb反应除了生成PbCl2外,还生成了Pb(ClO4)2、PbCl2O4和PbO2。同时焚烧温度和停留时间也是焚烧中Pb迁移分布的两个主要影响因素。     

Comparison of three sequential extraction procedures for fractionation of arsenic from highly polluted mining sediments

Three sequential extraction procedures were evaluated for the study of fractionation of arsenic in environmental solid samples. The procedures considered were as follows: i) the standardized and widely recognised BCR procedure, conceived for the study of the partitioning of heavy metals; ii) the procedure developed by Manful, who adapted a phosphorus scheme for arsenic fractionation; and iii) a novel sequential extraction scheme especially devised for arsenic. The efficiency and suitability of these methods and the corresponding extraction steps for partitioning arsenic obtained from the most important solid forms were tested by application of the methods to real sediment samples heavily polluted by mining activity. Results showed the BCR scheme was inappropriate for arsenic fractionation. The procedure could, nevertheless, be a first approach for the assessment of arsenic partitioning, because its first extraction step can be regarded as adequate for the estimation of the most easily mobilizable arsenic. Although the Manful scheme results in a more differentiated arsenic pattern, some drawbacks arise from the lack of selectivity of some of the reagents used, for example overlapping of specific target phases, overestimation of adsorbed arsenate because of inadequate coprecipitation processes, and the inability to discriminate among amorphous and crystalline oxyhydroxides which are mainly responsible for arsenic retention. The novel procedure achieves the most suitable arsenic fractionation, because the main phases retaining arsenic are selectively targeted according to mobilization potential. In addition, the simplicity of its extraction steps would enable automation in a continuous flow scheme.     

Evaluation of heavy metal bioavailability in soil amended with poultry manure using single and BCR sequential extractions

In the present study, three-step Community Bureau of Reference sequential extraction scheme (BCR-SES) and single extraction methods were performed to assess the mobility and availability of heavy metals (Cd, Cu, Pb, Fe and Zn) in an agricultural soil before and after amendment with poultry waste (PW).The PW samples were collected from poultry farms, situated in Hyderabad Sindh, Pakistan. The extractable heavy metals were measured by flame and electrothermal atomic absorption spectrometry. The validation of the method was carried out by analysis of a certified reference material of soil amended with sewage sludge (BCR-483). The single extractions using calcium chloride and EDTA, separately, while BCR-SESs were developed to evaluate the available heavy metals to plants and their environmental accessibility for control soil (CS), PW and soil amended with PW (SPW).The pH of the PW and SPW were found to be < 6.0, which may enhance the leaching of heavy metals to agricultural soil. The results from the partitioning study indicated that easily mobilised forms (acid exchangeable) of Cd were higher than other heavy metals. The oxidisable fractions of all heavy metals were dominant in PW and SPW as compared to found in CS samples. The EDTA- and CaCl₂-extractable heavy metals correspond to 5.0 to 10 and 0.5 to 3.0%, respectively of total contents in all three solid samples. Contamination factors revealed that the retention of Pb and Zn were higher compared with Cu, Cd and Fe in CS, PW and SPW samples.     

Development of fast thermal programs in electrothermal atomic absorption spectrometry using hot injection and removal of the ashing stage for determination of heavy metals in sequential extracts from sediments

In this work, a fast thermal methodology is developed for the determination of leachable Cu, Cr, Ni and Pb in sediments by electrothermal atomic absorption spectrometry. Fast thermal programs were tried using hot injection, removal of the ashing stage and matrix modifier and their performance compared with that obtained under conventional thermal programs. For this purpose, the BCR three-stage sequential extraction scheme was applied for partitioning of Pb, Cu, Ni and Cr. CRM BCR 601 lake sediment, which is provided with certified values for the extractable contents of the above metals according this scheme, was used for validation.A shortening of the measurement time by a factor of 3-4 was attained without losing analytical performance. Additionally, other features for speeding up determinations such as calibration are considered. Thus, specifically designed fast thermal programs allowed calibration with matrix-matched standards with extractants to be performed for most metals and fractions instead of standard additions. Background signals, LODs, repeatability and sensitivity were generally similar with both types of programs, hence yielding a comparable analytical performance.     

Effects of freeze-drying on partitioning patterns of major elements and trace metals in lake sediments

The effect of freeze-drying on elemental partitioning pattern in four lake sediments was evaluated using the sequential extraction method developed under the auspices of Community Bureau of Reference (BCR) of the Commission of European Communities. Redox-sensitive elements like iron, manganese, phosphorus, and sulfur were analyzed simultaneously with several trace metals. This allows a qualitative determination of which trace metal-scavenging phases commonly found in freshwater sediments that are most susceptible to freeze-drying.The comparison of a surface layer and a deeper more reduced layer collected from four sediment cores ranging from sub-oxic to anoxic condition indicate the changes in partitioning pattern due to freeze-drying. Two of the lakes exhibiting clearly reduced environments are most affected by freeze-drying in terms of change in partitioning patterns. However, this effect is element specific and varies with sediment depth along the redox gradient. Elements commonly associated with a sulfide phase (S, Fe, Cu, Zn, and Pb) and extracted in BCR step 3 are the most affected elements, but at the same time also dependent on the organic matter content in the sediment. Si and Al that are often considered as conservative elements show a shift from step 3 to step 2, and it is interpreted as a release of Si and Al from organic matter and the subsequent formation of oxides during freeze-drying. Calcium and manganese, elements that are often associated with a carbonate phase, do not seem to be severely affected by this kind of treatment. Carbonate-associated iron (operationally defined), however does show a clear tendency to oxidize during the freeze-drying process. In fact, the shift in iron (carbonate to oxide fraction) corresponds to 3-4% (w/w) of the total sediment in some cases. Surprisingly, a significant fraction of iron originally extracted in step 1 (as “carbonate”) seems to be immobilized during freeze-drying.These results clearly show that freeze-drying does not preserve the speciation pattern of major elements, trace metals, phosphorus, and sulfur in anoxic lake sediment core sections during storage prior to BCR sequential extraction procedures.     

Evaluating the mobility of toxic metals in untreated industrial wastewater sludge using a BCR sequential extraction procedure and a leaching test

The distribution and speciation of toxic metals in industrial wastewater sludge (IWS) was investigated. In this work, the modified BCR three-stage sequential extraction procedure was applied to the fractionation of Cr Pb Ni, and Cd in untreated industrial wastewater sludge from industrial sites in Hyderabad (Pakistan). The extracts were analyzed using electrothermal atomic absorption spectrometry. The procedure was evaluated using a certified reference material for soil mixed with sewage sludge BCR 483. The results from the partitioning study indicate that more easily mobilized forms (acid exchangeable) of Cd were dominant. The oxidizable fraction was dominant for all four toxic metals. Metal recovery was good, with <4% difference between the total metal recovered through the extractant steps and the total metal determined after microwave digestion. Lixiviation tests (DIN 38414-S4) were used to evaluate the leaching of toxic species from IWS, and it was observed that levels of leachable toxic metals were low compared to the amount of metal extracted in the exchangeable fraction of the BCR protocol.     

Comparison between conventional and ultrasound accelerated Tessier sequential extraction schemes for metal fractionation in sewage sludge

Chemical sequential extraction for metal fractionation in sewage sludge using the Tessier method has been accelerated by ultrasound. The two sequential extraction schemes (conventional and ultrasound accelerated) were compared in terms of extraction efficiency, precision, treatment time and partitioning patterns of metals. Extractable contents of Cu, Cr, Ni, Pb and Zn were measured by flame atomic absorption spectrometry, and the analytical results obtained by the two procedures were statistically compared (P = 0.95). No significant differences were found in the two first fractions (i.e. exchangeable and carbonate-bound), however, in the third and fourth extracts (i.e. Fe-Mn oxides-bound and organic matter-bound) the extraction capability of the two methods differed significantly. Received: 15 June 1998 / Revised: 10 November 1998 / Accepted: 11 November 1998     

Comparison between conventional and ultrasound accelerated Tessier sequential extraction schemes for metal fractionation in sewage sludge

Chemical sequential extraction for metal fractionation in sewage sludge using the Tessier method has been accelerated by ultrasound. The two sequential extraction schemes (conventional and ultrasound accelerated) were compared in terms of extraction efficiency, precision, treatment time and partitioning patterns of metals. Extractable contents of Cu, Cr, Ni, Pb and Zn were measured by flame atomic absorption spectrometry, and the analytical results obtained by the two procedures were statistically compared (P = 0.95). No significant differences were found in the two first fractions (i.e. exchangeable and carbonate-bound), however, in the third and fourth extracts (i.e. Fe-Mn oxides-bound and organic matter-bound) the extraction capability of the two methods differed significantly. Received: 15 June 1998 / Revised: 10 November 1998 / Accepted: 11 November 1998     

Kinetic speciation of BCR reference materials

The accurate study of heavy metal speciation is important in environmental monitoring. There has been much work developing various operationally defined speciation methods for soil and sediment, but there is a need to compare the different approaches by evaluating them for the same sample. In this article, a kinetic method was applied for the heavy metal speciation of the two BCR reference materials, CRM601 and BCR701, which have been specifically developed as materials to evaluate the validated BCR three-step sequential extraction method. When EDTA was used as an extractant, 81.0% of Cd, 68.0% of Cu, 21.5% of Ni, 80.3% of Pb and 71.9% of Zn was extracted from CRM601. For BCR701, the removal ratios were 92.0, 52.3, 18.7, 50.6 and 67.5% with EDTA and 95.7, 25.2, 20.0, 52.4 and 68.5% with hydroxylamine hydrochloride as an extractant, for Cd, Cu, Ni, Pb and Zn respectively. A two-component kinetic model was applied to the extraction curve and the extractable metals were readily classified into two categories, namely, labile fraction and non-labile fractions. The rate constants obtained from the regression model were found to be useful in quantifying the lability of an element. The rate constants obtained from the labile fractions in BCR701 were higher than that of obtained from CRM601, which indicated the high lability of metals in BCR701. When compared with the sequential extraction data, it seemed that the lability of an element was positively correlated to the first step extraction fraction.