64Cu放射性药物化学

64Cu半衰期为12.7 h,其衰变过程既发射β+粒子(β+,0.655 MeV,17.8%),又发射β-粒子(β-,0.573 MeV,38.4%)。近20年来,随着铜配位化学的发展,新型配体不断出现(如DOTA、TETA、NOTA、CB-TE2A、C3B-DO2A等)。Cu(Ⅱ)的络合物在生物体内/外的稳定性不断提高,64Cu已经成功标记在氨基酸、多肽、蛋白、核酸等分子以及纳米颗粒上。64Cu可制成正电子显像药物用作诊断,同时也有发展为放射性治疗药物的潜力。新型铜配体和标记方法以及新的药物靶标的研究已经成为64Cu放射性药物研究的热点,至今已研制出了多种64Cu标记的放射性药物,如64Cu-ATSM是有效的肿瘤乏氧显像剂,64Cu-PTSM是优良的血流示踪剂等。本文旨在介绍64Cu(Ⅱ)几种主要类型的含氮配体以及64Cu标记的放射性药物在显像和治疗方面的最新研究进展,并展望其发展趋势。     

Rapid determination of copper in plants by neutron activation analysis

A rapid and simple neutron-activation analysis method has been developed for the determination of copper in plant leaves. Irradiated samples are dissolved in a mixture of fuming nitric acid, 70% perchloric acid and concentrated sulphuric acid in the presence of copper carrier solution. The copper in the resulting solution is extracted as copper cupferronate into chloroform and back-extracted into concentrated ammonia solution. The copper is precipitated as sulphide with 3% aqueous thioacetanude solution and the precipitate is dissolved in nitric acid. The induced activity of copper-64 in the resulting solution is counted with a 400-channel analyser. The photopeak of the annihilation energy of copper-64 at 0.51 MeV is compared with that of a copper standard processed in the same manner. After counting, the chemical yield of the separated copper is found by re-irradiating aliquots of the copper nitrate solution and comparing the induced activity of coppcr-66 at 1.04 MeV with that of another standard processed in a similar manner. The time required to complete the analysis, including the second irradiation and all radioactivity measurements, is about 25 min. The accuracy of the method was checked by analysing a biological standard of known copper content. The proposed method was successfully applied to the determination of copper in the leaves of 10 different plants (copper content 4-30 ppm).     

Preparation, nano purification, quality control and labeling optimization of [64Cu]-5,10,15,20-tetrakis (penta fluoro phenyl) porphyrin complex as a possible imaging agent

Cu-64 was produced via the ⁶⁸Zn (p,αn)⁶⁴Cu nuclear reaction (≈200 mCi, >95 % chemical yield at 180 μA for 1.1 h irradiation, (radionuclidic purity >96 %, copper-67 as impurity) followed by purification with amino functionalized nano magnetic oxide, Fe₃O₄ aiming to remove trace amount of heavy metal ions from aqueous media due to achieve ultra pure [⁶⁴Cu] CuCl₂ for labeling step. [⁶⁴Cu] labeled 5,10,15,20-tetrakis(penta fluoro phenyl) porphyrin ([⁶⁴Cu]-TFPP) was prepared using freshly prepared [⁶⁴Cu] CuCl₂ (Cu-64; T _1/2 = 12.7 h) and 5,10,15,20-tetrakis(penta fluoro phenyl)porphyrin (H₂TFPP) for 60 min at 100 °C under reflux condition (radiochemical purity: >97 % ITLC, >98 % HPLC, specific activity: 14–16 GBq/mmol). Stability of the complex was checked in final formulation and human serum for 24 h. The partition coefficient was calculated for the compound (log P = 0.73). The biodistribution of the labeled compound in vital organs of wild-type rats was studied using scarification studies and PET imaging up in 2 and 4 h after injection. A detailed comparative pharmacokinetic study performed for ⁶⁴Cu cation and [⁶⁴Cu]-TFPP. The complex is mostly washed out from the circulation through kidneys and liver and can be an interesting tumor imaging/targeting agent due to high specific uptake and rapid excretion through the urinary tract.     

Preparation of carrier-free copper-64,67 nuclides by liquid-liquid extraction

A simple procedure is described for the preparation of carrier-free copper-64,67 nuclides from a zinc target exposed to fast neutrons. The irradiated target is dissolved in water, and thepH of the solution is adjusted to about six. Radioactive copper nuclides are then extracted with a 1% solution of resacetophenone oxime in cyclohexanone. Zinc is not extracted under these conditions. Radiocopper is back-extracted by shaking the organic phase with dilute mineral acid. About 5 mCi of carrier-free⁶⁴Cu can be obtained from 1 g of zinc.     

Determination of radioactive cobalt in reactor coolant water by solvent extraction

A rapid extraction separation method is described for the radiochenaical determination of cobalt-58 and cobalt-60 in reactor coolant water. After adjustment of the pH of the sample water to 5.0-5.5, cobalt diethyldithiocarbamate is extracted with benzene. Other nuclides, e.g., manganese-54 and -56, copper-64 and iron-59, which are usually present in reactor coolant water, are also extracted together with cobalt. However, they can be readily removed by washing the extract with mercury(II) chloride solution. The cobalt-58 and -60 activities are measured by gamma counting of an aliquot of the washed extract. Trace amounts of radioactive cobalt in 500 ml of sample water can be quantitatively extracted without the use of carrier. The separation could be finished in 15 min and an average recovery of 99.5 % was obtained, with a relative standard deviation of 1.4% (25 experiments).     

Decyl(Tri-Tert-Butyl)Phosphonium Tetrafluoroborate/Palladium Acetate: An Effective Catalyst for Cross-Coupling Reaction of Arylbromides with Phenylacetylene in Copper-Free Conditions

Abstract

The phosphonium salts with sterically hindered cation and noncoordinating anion can be used as phase-transfer reagent in the Sonogashira cross-coupling reaction allowing copper- and amine-free protocol. The reactions proceed under mild conditions with good yields.     

Catalytic, Asymmetric Cyclopropanation of Diphenylethene Mediated by Chiral Copper-(Schiff Base) Complexes

Asymmetric cyclopropanation of diphenylethene with diazoacetates was catalyzed by new copper-(Schiff base) complexes. The effects of the substituents in substituted salicylaldehyde on the ee's were studied, and a 94.5% ee was achieved. This revised version was published online in June 2006 with corrections to the Cover Date.     

FeCl3/PPh3-catalyzed Sonogashira coupling reaction of aryl iodides with terminal alkynes

Conditions for a FeCl₃/PPh₃-catalyzed and palladium-, copper-, amine free-Sonogashira coupling reaction of aryl halides with terminal alkynes are reported. The protocol was applicable to a wide variety of substituted aryl iodides and alkynes with different steric and electronic properties and gave excellent yields of the desired coupling products.     

A purification system for 64Cu produced by a biomedical cyclotron for antibody PET imaging

Ion exchange is a simple and efficient method for separating no-carrier-added ⁶⁴Cu from an irradiated Ni target. We developed a semi-automated two-round ⁶⁴Cu separation system equipped with a strong-base anion exchange resin column. We first verified the efficiency of the system using a non-radioactive substitute consisting of 25 mg of Ni and 127 ng of Cu, and confirmed that Cu was completely eluted at the second round of the separation step. After the bombardment, separation of ⁶⁴Cu from the Ni target was achieved with high radiochemical purity. ⁶⁴Cu produced and separated in this study had an extremely low level of Ni impurity. It could be used for labeling monoclonal antibodies for antibody positron emission tomography imaging and synthesizing radiopharmaceuticals.     

Polymer-supported palladium perfluorooctanesulfonate [Pd(OPf)2]: A recyclable and ligand-free palladium catalyst for copper-free Sonogashira coupling reaction in water under aerobic conditions

Amberlyst A-21, a kind of well-known and cheap polymeric material, was treated with palladium perfluorooctanesulfonate [Pd(OPf)₂] giving a reagent with a palladium loading of 1.94 (wt%). The polymer-supported fluorous palladium catalyzes the highly efficient Sonogashira coupling reaction in water. The reactions can be performed under copper- and ligand-free conditions in an air atmosphere. The palladium catalyst is easily separated and can be reused several times without a significant loss of catalytic activity.     

Development of [<Superscript>64</Superscript>Cu]-DOTA-anti-CD20 for targeted therapy

Copper-64 was produced as a by-product of ⁵⁵Co via ⁶⁴Ni(p,n)⁶⁴Cu by 15 MeV proton bombardment of ^natNi resulting in a thick target yield of 5.31 MBq/μAh (143.5 μCi/μAh) and a radiochemical separation yield of 95% (radionuclide purity >97% after 25 hours of bombardment). Rituximab was successively labeled with [⁶⁴Cu]-CuCl₂. N-succinimidyl-1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid (DOTA-NHS) was prepared at 25 °C using DOTA and N-hydroxy succinimide (NHS) in CH₂Cl₂ followed by the addition of 1 ml of a Rituximab pharmaceutical solution. Radiolabeling was performed at 37 °C in 3 hours. Radio thin-layer chromatography showed an overall radiochemical purity of 90–95% at optimized conditions (specific activity=30 GBq/mg, labeling efficacy; 82%) using various chromatography systems. The final isotonic ⁶⁴Cu-DOTA-Rituximab complex was passed through a 0.22 μm filter and checked by gel electrophoresis for radiolysis control. Stability of the final product was checked in the formulation and in presence of human serum at 37 °C.     

Copper- and ligand-free Sonogashira reaction catalyzed by palladium in microemulsion

An oil-in-water microemulsion containing PdCl2 and NaOH can be used as an effective catalyst system for rapid copper- and ligand-free Sonogashira reaction of aryl halides and phenylacetylene. Excellent yield of the Sonogashira reaction catalyzed by 0.5 mol% palladium could be achieved within 5 min. The types of base have an intense influence on the reaction. The reaction rate was increased with increased aqueous content in the microemulsions, and dispersed palladium nanoparticles can be in situ formed without other reductants.     

Highly efficient and enantioselective cyclopropanation of styrene with diazoacetates using a new copper-(Schiff-base) catalyst

A new copper-(Schiff-base) complex, derived from (S)-2-amino-1,1-di(3,5-di-t-butylphenyl)propanol, 2-hydroxy-5-nitrobenzaldehyde and copper acetate monohydrate, was used as an efficient catalyst for the cyclopropanation of styrene with diazoacetates, affording ees of up to 98%.     

Preparation of t-butyl 4-diethylphosphono-3-oxobutanethioate and use in the synthesis of (E)-4-alkenyl-3-oxoesters and macrolides

The preparation of t-butyl 4-diethylphosphono-3-oxobutanethioate (1) and Wadsworth- Emmons reaction with aldehydes and ketones is reported. Some of the products of these reactions were converted to unsaturated 3-oxomacrolides or 3-oxodiolides by transesterification in the presence of copper-(I)-trifluoroacetate.     

Study of acidity of the modified alumosilicate sorbents prepared by the method of destructive epitaxial precipitation

Acid properties of the surface of copper-, cobalt- and iron-containing alumosilicate sorbents prepared by the method of destructive epitaxial precipitation we investigated. Concentration and strength of the proton acid centers of the samples is studied in comparison with the parent natural alumosilicate sorbent based on the opokas of the Prikaspii lowland of Astrakhan’ region.

     

超声辐射下醋酸钯催化Sonogashira偶联反应

超声辐射下无铜无胺无膦Pd(OAc)_2体系中进行Sonogashira偶联反应,建立了适用于碘代芳烃的Sonogashira芳基化反应的合成方法,此法具有反应条件温和、反应时间短、收率高的优点。     

Catalytic Activity of Immobilized Transition Metal Complexes with Monoethanolamine in Carbon Tetrachloride Addition to Multiple Bonds

The rates of CCl₄ addition to octene-1 in the presence of monoethanolamine complexes with Mn, Cu, V, Co, and Ni ions immobilized on the surface of silica have been determined. The majority of catalysts exhibit an inverse dependence of relative catalytic activity on surface metal concentration. Changes in the total concentrations and ligand environments of paramagnetic ions in the course of reaction are studied by EPR spectroscopy for copper- and vanadyl-containing catalysts. It has been found that the activity of complexes correlates with the rate of reduction of a metal ion in the course of a catalytic reaction.     

Reactivity of functional groups on the protein surface: development of epoxide probes for protein labeling

We present the development of new affinity probes for protein labeling based on an epoxide reactive group. Systematic screening revealed that an epoxide functionality possesses the special combination of stability and reactivity which renders it stable toward proteins in solution but reactive on the protein surface outside the active site (proximity-induced reactivity). Highly efficient and selective labeling of purified HCA II (human carbonic anhydrase II) was achieved. For instance, 2 equiv of epoxide probe 9 was sufficient for nearly quantitative labeling of HCA II (>90% yield, 20 h reaction time). MS analysis of the labeled protein revealed that 1 equiv of the probe was attached and that labeling occurred at a single residue (His 64) outside the active site. Importantly, epoxide probe 9 selectively labeled HCA II both in simple protein mixtures and in cellular extracts. In addition to the chemical insight and its relevance to many epoxide-containing natural products, this study generated a promising lead in the development of new affinity probes for protein labeling.     

Copper-, ligand- and solvent-free synthesis of ynones by coupling acid chlorides with terminal alkynes

A general and efficient copper-, ligand- and solvent-free synthesis of ynones by coupling of a wide range of acid chlorides with terminal alkynes catalyzed by palladium(II) acetate at room temperature is reported.     

Chemoselective silylzincation of functionalized terminal alkynes using dianion-type zincate (SiBNOL-Zn-ate): regiocontrolled synthesis of vinylsilanes

A regio- and chemoselective silylzincation reaction of various functionalized alkynes was developed using a newly designed dianion-type zincate. Silylzincation of terminal alkynes, followed by electrophilic trapping, proved to be a powerful tool for the one-pot, regiocontrolled generation of trisubstituted functionalized alkenes. The functionalized vinylzincate intermediate also undergoes copper- and palladium-catalyzed C-C bond-forming reactions in high yields and with high regio- and chemoselectivities.