Photolysis of organopolysilanes. The reaction of photochemically generated methylphenylsilylene with conjugated dienes

Photolysis of 2-phenylheptamethyltrisilane (I) in the presence of acyclic and cyclic conjugated dienes has been investigated using both a high-pressure mercury lamp with a quartz filter and a low-pressure mercury lamp with a Vycor filter. Irradiation of I in the presence of 1,3-butadiene, isoprene or 2,3-dimethylbutadiene with a high-pressure mercury lamp gave a product arising from photochemical isomerization of a silacyclopropane derivative and a compound apparently formed by 1,4-silylene addition, along with a 1/1 “ene” adduct of the diene to a photo-rearranged intermediate containing the silicon—carbon double bond. Irradiation of I in the presence of the conjugated diene with a low-pressure mercury lamp, followed by treatment of the product with methanol, afforded a methoxysilane arising from methanolysis of the corresponding silacyclopropane, together with the isomerization product, silacyclopentene and rearranged addition product. Irradiation of I in the presence of cyclopentadiene with a high-pressure mercury lamp produced methylphenylsilylcyclopentadiene, while irradiation of a similar mixture with a low-pressure mercury lamp followed by treatment with methanol gave 4-(methoxymethylphenylsilyl)-1-cyclopentene. With 1,3-cyclooctadiene, the photochemically generated methylphenylsilylene afforded many types of addition product. Photolysis of I in the presence of 1,3-cyclohexadiene, however, afforded none of the silylene addition products.     

Adduct of dimedone and 1,2-dibenzoylethene in reactions with nitrogen binucleophiles

Dimedone adduct with 1,2-dibenzoylethene in reaction with p-phenylenediamine formed a bispyrrole derivative, and with benzidine and ethylenediamine afforded the corresponding monopyrroles. The reaction of the initial adduct with tryptamine results in a product containing a pyrrole and an indole fragments. Both versions of N-heterocyclization proceed in the reaction with urea yielding derivatives of tetrahydroindole and pyrrole. In the reaction with hydrazine hydrate a substituted pyridazine was obtained as a result of a dimedone molecule elimination from the intermediate cyclization product.     

四氟乙烯齐聚体的反应 四氟乙烯四、五聚体和芳香胺的反应

前已报道四氟乙烯四聚体(全氟-3,4-甲基己烯-3)(1)、五聚体(全氟-3,4-二甲基-4-乙基己烯-2)(2)和脂肪烷氧以及脂肪胺的亲核反应.本文报道化合物1,2和芳香胺如苯胺、β-萘胺的反应.由于烯烃1、2双键处于分子中间,因而当亲核试剂进攻时,双键容易发生重排,生成的末端基烯烃更具反应性,故导致一取代、二取代、三取代以及环化降解等复杂产物.     

分子动力学模拟研究纳米碳管中甲醇-水混合溶液的结构与输运性质

利用分子动力学模拟方法,对比考察了平衡条件、外压作用、梯度电场作用下,摩尔比为1:1的甲醇-水混合溶液在纳米碳管(CNT)中的静态结构以及输运行为.研究发现:在平衡体系与外压作用下,纳米碳管内甲醇与水呈现出明显的不混溶现象,甲醇主要分布于管壁附近,水分子主要分布于纳米碳管轴心附近;而在梯度电场作用下,纳米碳管由疏水性向亲水性转变,更多的水分子分布于管壁,导致纳米碳管内甲醇-水的不混溶现象消失.另一方面,在外压作用下,纳米碳管内甲醇与水呈现单向移动;而在梯度电场下,甲醇与水呈现快速的双向移动,其流通量较相应外压作用体系高出近一个数量级,但由于双向的流通量大小相近,导致净流通量与外压作用下的净流通量差异不大.     

分子动力学模拟研究纳米碳管中甲醇-水混合溶液的结构与输运性质

利用分子动力学模拟方法,对比考察了平衡条件、外压作用、梯度电场作用下,摩尔比为1：1 的甲醇-水混合溶液在纳米碳管（CNT）中的静态结构以及输运行为. 研究发现：在平衡体系与外压作用下,纳米碳管内甲醇与水呈现出明显的不混溶现象,甲醇主要分布于管壁附近,水分子主要分布于纳米碳管轴心附近;而在梯度电场作用下,纳米碳管由疏水性向亲水性转变,更多的水分子分布于管壁,导致纳米碳管内甲醇-水的不混溶现象消失. 另一方面,在外压作用下,纳米碳管内甲醇与水呈现单向移动;而在梯度电场下,甲醇与水呈现快速的双向移动,其流通量较相应外压作用体系高出近一个数量级,但由于双向的流通量大小相近,导致净流通量与外压作用下的净流通量差异不大.     

Tandem on-line dialysis with a double and single dialyser in flow injection dialysis — Simultaneous determination of calcium and high chloride in industrial effluents

The on-line double membrane dialyser described previously was coupled in series to a single dialyser in the manifold of a flow injection system to include the determination of samples with a high chloride content simultaneously with calcium in industrial effluents from a single sample injection. 50 μl of industrial effluent samples are injected into a carrier stream and are simultaneously dialysed in the double on-line dialyser for chloride and calcium. The dialysed chloride sample zones are further directed to a second dialyser that is incorporated in series with the first dialyser. This enables laboratories to determine samples with a very high chloride content up to 60 g/l simultaneously with calcium by using an automated tandem on-line dialysis technique. The fast and reliable fully automated two-component flow injection procedure operated at a sampling frequency of 90 samples per hour and the results obtained for chloride and calcium in industrial effluents compared well with those obtained by standard methods.     

Thermosensitive poly(methyl methacrylate) emulsion prepared in the presence of poly(vinyl alcohol) with a cloud point as a protective colloid

An emulsion of poly(methyl methacrylate) (PMMA) was prepared using poly(vinyl alcohol) (PVA) of low degree of hydrolysis with a cloud point as a protective colloid. The behaviour of an aqueous solution of PVA with 80% degree of hydrolysis was first investigated in terms of the Huggins constant in viscometry. MMA was polymerized using the PVA at 20 °C, where no abnormality in the aqueous PVA was observed. The change in transmittance of the emulsion observed with a UV–vis photometer revealed that in the case of UV light of wavelength 370 nm, the transmittance decreased markedly at around 30 °C with an increase in temperature, and then increased with a decrease in temperature. The thermosensitive property resulted from PVA with a low degree of hydrolysis with a cloud point, at a higher temperature of which the PVA loses solubility in water owing to weakening of the hydrogen bond between PVA molecules and water.     

Comparison of modifiers for determination of arsenic, antimony and selenium by atomic absorption spectrometry with atomization in graphite tube or hydride generation and in-situ preconcentration in graphite tube

The study was performed to compare the effect of magnesium modifier (magnesium nitrate) with that of other modifiers (palladium nitrate and nickel nitrate) in determination of arsenic, antimony and selenium by atomic absorption spectroscopy with atomization in a graphite tube, with generation of hydrides and in situ preconcentration in a graphite tube. The assumed criterion of a modifier performance was the magnitude of the analytical signal. It was found that in determinations with atomization in a graphite furnace the effects of all these modifiers were comparable, while in those with hydride generation and in situ preconcentration in a graphite tube the magnesium modifier showed poorer performance (25% decrease of the analytical signal). In determinations of arsenic and selenium the analytical signal obtained with magnesium salt as a modifier was comparable with those obtained in the presence of all other modifiers.     

Lattice Boltzmann simulations of droplet formation in a T-shaped microchannel

We investigated the formation of a droplet from a single pore in a glass chip, which is a model system for droplet formation in membrane emulsification. Droplet formation was simulated with the lattice Boltzmann method, a method suitable for modeling on the mesoscale. We validated the lattice Boltzmann code with several benchmarks such as the flow profile in a rectangular channel, droplet deformation between two shearing plates, and a sessile drop on a plate with different wetting conditions. In all cases, the modeling results were in good agreement with the benchmark. A comparison of experimental droplet formation in a microchannel glass chip showed good quantitative agreement with the modeling results. With this code, droplet formation simulations with various interfacial tensions and various flow rates were performed. All resulting droplet sizes could be correlated quantitatively with the capillary number and the fluxes in the system.     

Sugar cane bagasse-lignin as photo-stabilizer for butadiene rubber

In this work we have studied the stabilizing effect of a natural antioxidant, sugar cane bagasse-lignin, on the photo-oxidation of a commercial sample of butadiene rubber. This stabilizer was investigated in various concentrations, in the pure form, and associated with a diamine or a phosphite stabilizer. Stabilization of butadiene rubber with this lignin associated with the diamine produced a material with a photo-chemical stability comparable to that of a stabilized commercial sample.     

Spatial self-organization of comb macromolecules

The properties and the self-assembly of single comb macromolecules in solution were studied. The elastic properties of a polymer chain with a high density of side chains forming a cylindrical brush were discussed, in particular, its persistence length was calculated. The cases of brushes with flexible and rigid side chains, as well as brushes with two types of incompatible side segments, were considered. It was shown that brushes with rodlike dangling chains have a higher rigidity. In addition, a comb macromolecule with the hydrophobic main chain and hydrophilic side chains was considered. Such a macromolecules in a selective solvent forms a globule with the hydrophobic core and a soluble shell. The specific feature of the globule is its ability to acquire nonspherical spatial forms. Problems related to the stability and transformation of globule shape are discussed in detail.     

BAB‐random‐C Monomer Sequence via Radical Terpolymerization of Limonene (A), Maleimide (B), and Methacrylate (C): Terpene Polymers with Randomly Distributed Periodic Sequences

A naturally abundant terpene, limonene (A), was radically polymerized with a maleimide derivative (B) and methacrylate (C) in a fluorinated alcohol to give terpolymers with unprecedented BAB‐random‐C sequences in which the BAB monomer sequence was randomly copolymerized with a C unit. In each binary system, limonene was hardly copolymerized with methacrylate while it was efficiently copolymerized with maleimide to result in a 1:2‐alternating BAB periodic sequence, in part due to the penultimate effects and hydrogen‐bonding interactions with fluoroalcohol. Methacrylate and maleimide were randomly copolymerized to give copolymers rich in methacrylate units with minimal amounts of maleimide–maleimide sequences. Their terpolymerization resulted in a BAB‐r‐C sequence as a consequence of the selective BAB polymerization between limonene and maleimide, the random copolymerization between methacrylate and maleimide, and the lack of copolymerization between limonene and methacrylate.     

Temperature variations and amyloglucosidase levels at different bed depths in a solid state fermentation system

Studies on moist wheat bran medium, inoculated with Aspergillus niger CFTRI 1105, indicate steep gradients in the temperature and enzyme levels at different depths in deep bed rectangular fermenters with different loads. An increase of about 2.5 °C over a bed depth of 40 mm in a fermenter with a load of 49.7 kg m⁻² was due to metabolic heat generation in the initial fermentation period. This was found to result in a doubled fermentation time to attain enzyme levels which were comparable, although still lower by 4.6%, with those in a fermenter with a load of 17.8 kg m⁻². The temperature variations were about 10–18 °C for a bed depth of 80 mm and the highest enzyme levels were lower by 23.4%, even after 48 h, with a load of 49.7 kg m⁻² compared with those for a load of 17.8 kg m⁻² . The metabolic heat and enzyme biosynthesis functions were found to be significantly affected by an increase in bed depth. The maximum temperature variations recorded in the fermenter with a load of 126.1 kg m⁻² were 19.5 °C at 12 h and 21.2 °C at 60 h for 80 and 160 mm bed depths respectively. Consequently, the maximum enzyme levels were lower by 81%–86% and required a 2.5-fold increase in fermentation time compared with a fermenter with a load of 17.8 kg m⁻².The results indicate that the temperature gradients play a key role in the biosynthesis of the enzyme in a solid state fermentation system involving deep beds.     

Terminal trifluoromethyl-alkoxy and-alkenyloxy nematic liquid crystals for LCDs with active matrix addressing

We have synthesized a new class of compounds suitable for LCD applications, incorporating a trifluoromethyl group in the terminal alkoxy- or alkenyloxy-chain. These compounds appear to fulfil many of the requirements for use in TN-LCDs. Core units containing a cyclohexyl ring, which tend to induce a lower viscosity than that of the analogous aromatic materials, were synthesized. Systems containing several aromatic rings were also prepared with a view to producing compounds of high birefringence. Compounds containing a lateral fluorosubstituent as well as a polar substituent in a terminal position were synthesized in order to generate a high positive value of the dielectric anisotropy. Molecules incorporating a bicyclo[2.2.2]octane ring were also synthesized in order to produce a high nematic clearing point and to influence the elastic constants. Compounds with three 1,4-disubstituted rings were synthesized with a view to producing materials with a high nematic clearing point and as low a melting point as possible. A series of compounds with a carbon-carbon double bond in the terminal chain was prepared in an attempt to produce compounds with appropriate values and ratios of the elastic constants.     

Synthesis and reactivity of 3-(trichlorogermyl)propanoic acid and 3-(triphenylgermyl) propanoic acid

3-(Trichlorogermyl)propanoic acid (la) reacts with phenylmagnesium bromide in malar ratio 1:4 to give 3-(triphenylgermyl)propanoic acid (2a).In the compounds la and 2a theβ-carboxylic functional group shows some unusual properties when they react with excess of phenylmagnesium bromide.The compound la reacts with phenylmagnesium bromide in molar ratio 1:5 to give phenyl 2-(triphenylgermyl)ethylketone (3a) and in molar ratio 1:6 to give l,l-diphenyl-3-(triphenylgermyl)propanol (4a).The compound 2a reacts with phenylmagnesium bromide in molar ratio 1:2 to give 3a and in molar ratio 1:3 to give 4a also.Dehydration of the compound 4a with dilute hydrochloric acid seems especially easy.Moreover,the compound la reacted with phenylmagnsium bromide in molar ratio 1:6,then the mixture was treated with dilute hydrochloric acid to give 1,1-diphenyl-3-(triphenylgermyl)-1-propene (5a) in one pot reaction.Alkyl Ge-C bond in the compound 5a can be cleaved selectively by lithium aluminium hydride ( LiAlH4) in good yiel     

Terminal trifluoromethyl-alkoxy and-alkenyloxy nematic liquid crystals for LCDs with active matrix addressing

We have synthesized a new class of compounds suitable for LCD applications, incorporating a trifluoromethyl group in the terminal alkoxy- or alkenyloxy-chain. These compounds appear to fulfil many of the requirements for use in TN-LCDs. Core units containing a cyclohexyl ring, which tend to induce a lower viscosity than that of the analogous aromatic materials, were synthesized. Systems containing several aromatic rings were also prepared with a view to producing compounds of high birefringence. Compounds containing a lateral fluorosubstituent as well as a polar substituent in a terminal position were synthesized in order to generate a high positive value of the dielectric anisotropy. Molecules incorporating a bicyclo[2.2.2]octane ring were also synthesized in order to produce a high nematic clearing point and to influence the elastic constants. Compounds with three 1,4-disubstituted rings were synthesized with a view to producing materials with a high nematic clearing point and as low a melting point as possible. A series of compounds with a carbon-carbon double bond in the terminal chain was prepared in an attempt to produce compounds with appropriate values and ratios of the elastic constants.     

Size and Structure of Empty and Filled Nanocontainer Based on Peptide Dendrimer with Histidine Spacers at Different pH

Novel peptide dendrimer with Lys-2His repeating units was recently synthesized, studied by NMR (Molecules, 2019, 24, 2481) and tested as a nanocontainer for siRNA delivery (Int. J. Mol. Sci., 2020, 21, 3138). Histidine amino acid residues were inserted in the spacers of this dendrimer. Increase of their charge with a pH decrease turns a surface-charged dendrimer into a volume-charged one and should change all properties. In this paper, the molecular dynamics simulation method was applied to compare the properties of the dendrimer in water with explicit counterions at two different pHs (at normal pH with neutral histidines and at low pH with fully protonated histidines) in a wide interval of temperatures. We obtained that the dendrimer at low pH has essentially larger size and size fluctuations. The electrostatic properties of the dendrimers are different but they are in good agreement with the theoretical soft sphere model and practically do not depend on temperature. We have shown that the effect of pairing of side imidazole groups is much stronger in the dendrimer with neutral histidines than in the dendrimer with protonated histidines. We also demonstrated that the capacity of a nanocontainer based on this dendrimer with protonated histidines is significantly larger than that of a nanocontainer with neutral histidines.     

A potentiometric polypyrrole-based glucose biosensor

A new concept is described for monitoring a biomolecule with a sensor having an enzyme entrapped in a conducting polymer. This is based on the sensitivity of the electroactive polymer itself to changes of pH in solution. The concept has been investigated for a glucose sensor with glucose oxidase (GOD) immobilized in a polypyrrole (PPy) layer on an inert platinum electrode. Measurements with a Pt/PPy/GOD electrode for glucose concentrations in the physiological range gave a linear correlation with logarithm of concentration over one decade with a satisfactory dynamic response. There was practically no change of slope or range of linear response to glucose after several days of use; this was in contrast to the amperometric response of the detector when there was about a 50% loss of sensitivity.     

Evaporation of microdroplets of ethanol-water mixtures on gold surfaces modified with self-assembled monolayers

The wetting property and evaporation behavior of ethanol-water mixtures of various concentrations on gold surfaces modified with 1-decanethiolate self-assembled monolayers (SAMs) were studied by digital contact angle analysis. It has been shown that the initial contact angle decreases monotonically with increased concentration of ethanol in the mixture. Evaporation studies revealed a general trend with a preliminary increase in contact angle accompanied with a decrease in contact area, then a constant contact angle accompanied with a slower, linear decrease in contact area. At the very beginning of the evaporation process, the contact angles showed a rapid decrease for the microdroplets of a binary mixture with equal volume fractions (i.e., 50% ethanol). Three distinct stages of the evaporation profile for the ethanol-water mixtures were observed, which differ from the inclusive "pinning" and "shrinking" behavior observed for the pure liquid case. Ultimately, the study makes possible the use of an evaporation profile to monitor the change in concentration of a binary system and allows a better understanding of the interactions between liquid microdroplets with solid substrates.     

Interactions of poly(tert-butyl acrylate)-poly(styrene) diblock copolymers with lipids at the air-water interface

Diblock copolymers with hydrophilic poly(tert-butyl acrylate) (PtBA) and hydrophobic poly(styrene) (PS) blocks were synthesized with a view to use them as a surfactant in tear film for increasing the ocular comfort in dry eye syndrome. Interactions of six PtBA-PS copolymers with four important lipids found in the tear film, namely cholesterol, cholesteryl palmitate, dipalmitoyl phosphatidylcholine, and phosphatidylinositol, were studied at the air-water interface using a Langmuir trough. Thermodynamics of mixing of the copolymers and the lipids in the mixed monolayers was determined by calculating excess free energy of mixing. The diblock copolymers showed repulsive interactions with cholesteol and cholesteryl palmitate, near neutral interactions with dipalmitoyl phosphatidylcholine, and attractive interactions with phosphatidylinositol. The lipids interacted with the PS component of the copolymer. The results indicate that a copolymer with a small hydrophilic group and a big hydrophobic group can be a likely candidate for forming stable interactions with the lipids present in the tear film and hence increase the ocular comfort.