碳链相连双酞菁钴发色团之间的相对取向及距离

用分子激子理论分析了分子间及分子内酞菁二聚体中发色团的距离和相对取向, 说明了乙烷的1, 2位被酞菁取代后, 在溶液中的构象接近顺式。表明非链相互作用可克服空间阻碍导致有序结构形成。     

碳链相连双酞菁钴发色团之间的相对取向及距离

用分子激子理论分析了分子间及分子内酞菁二聚体中发色团的距离和相对取向, 说明了乙烷的1, 2位被酞菁取代后, 在溶液中的构象接近顺式。表明非链相互作用可克服空间阻碍导致有序结构形成。     

Synthesis of lipooligosaccharides related to nodulation factors ofRhizobium sp. NGR234

Trisaccharide analogs of natural nodulation factors fromRhizobium sp. NGR234, namely, 2-acetamido-2-deoxy-4-O-(2-deoxy-2-hexadecanamido-β-d-glucopyranosyl)-6-O-(2-O-methyl-α-l-fucopyranosyl)-d-glucopyranose and its derivatives containing a 4-O-acetyl or a 3-O-sulfo group at thel-fucose residue, were synthesized. The oligosaccharides synthesized were shown to posses biological activity. Laboratoire de Biologie Moléculaire des Plantes Supérieures (LBMPS), Université de Genève, 1 ch. de l'Impératrice, 1292 Chambesy-Genève, Suisse. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya No. 3, pp. 513–518, March, 1998.     

The effect of the number of carbohydrate moieties on the azaphthalocyanine properties

A series of azaphthalocyanines (AzaPc) bearing one, two, four or eight isopropylidene-protected galactosyl units was prepared by azide-alkyne click reaction or by classical Pc template cyclotetramerization of the corresponding dicyanopyrazine and AzaPc properties important for photodynamic therapy were compared. All compounds absorbed at long wavelengths (above 650 nm) and belonged to strong singlet oxygen producers (Φ(Δ) = 0.58-0.64) retaining significant fluorescence emission (Φ(F) = 0.026-0.23). The only exception was the compound with four isopropyliden-protected galactosyl units where partial aggregation was observed. Removal of protecting groups increased the polar character of all AzaPc. However, only AzaPc bearing eight galactoses was found to be water-soluble (105 mg mL(-1)) but noticeably aggregated in water as well as in organic solvents (DMF, DMSO). Amphiphilic AzaPc bearing one deprotected galactose was incorporated into the lipidic bilayer of liposomes in a nonaggregated form. Liposomes may therefore be a suitable delivery system for this amphiphilic photosensitizer.     

Electronic coupling between heme electron-transfer centers and its decay with distance depends strongly on relative orientation

A method for calculating the electron-transfer matrix element V(RP) using density functional theory Kohn-Sham orbitals is presented and applied to heme dimers of varying relative orientation. The electronic coupling decays with increased iron separation according to V(RP) = V(0)(RP)exp(-beta r/2) with a distance dependence parameter beta approximately 2 A(-1) for hemes with parallel porphyrins and either 1.1 or 4.0 A(-1) when the porphyrin planes are perpendicular, depending on the alignment of the iron d(pi) orbital. These findings are used to interpret the observed orientation of the hemes in tetraheme redox proteins such as Flavocytochrome c(3) fumarate reductase (Ifc(3), PDB code 1QJD) of Shewanella frigidimarina, another flavocytochrome from the same bacterium (Fcc(3), 1E39) and a small tetraheme cytochrome of Shewanella oneidensis strain MR1 (1M1P). Our results show that shifting and rotating the hemes controls the adiabaticity of the three electron hopping steps.     

PNIPAM chain collapse depends on the molecular weight and grafting density

This study demonstrates that the thermally induced collapse of end-grafted poly(N-isopropylacrylamide) (PNIPAM) above the lower critical solution temperature (LCST) of 32 degrees C depends on the chain grafting density and molecular weight. The polymer was grafted from the surface of a self-assembled monolayer containing the initiator (BrC(CH3)2COO(CH2)11S)2, using surface-initiated atom transfer radical polymerization. Varying the reaction time and monomer concentration controlled the molecular weight, and diluting the initiator in the monolayer altered the grafting density. Surface force measurements of the polymer films showed that the chain collapse above the LCST decreases with decreasing grafting density and molecular weight. At T > LCST, the advancing water contact angle increases sharply on PNIPAM films of high molecular weight and grafting density, but the change is less pronounced with films of low-molecular-weight chains at lower densities. Below the LCST, the force-distance profiles exhibit nonideal polymer behavior and suggest that the brush architecture comprises dilute outer chains and much denser chains adjacent to the surface.     

Structural investigation of the antibiotic ristomycin A: The 13C-NMR evidence on the carbohydrate moieties and their linkages to the aglycone

The ¹³C-NMR experiments, which define the last details of the structure of ristomycin A, are described.     

UV-driven switching of chain orientation and liquid crystal alignment in nanoscale thin films of a novel polyimide bearing stilbene moieties in the backbone

A novel photosensitive polyimide, poly(4,4'-stilbenylene 4,4'-oxidiphthalimide) (ODPA-Stilbene PSPI) was newly synthesized. The most surprising feature of this PSPI is that the PSPI films irradiated with linear polarized ultraviolet light (LPUVL) can favorably induce a unidirectional alignment of liquid crystals (LCs) in contact with the film surface and further switch the director of the unidirectionally aligned LCs from a perpendicular direction to a parallel direction with respect to the polarization direction of LPUVL by simply controlling the exposure dose in the irradiation process. These LPUVL-irradiated films were found to provide high anchoring energy to LCs, always giving very stable, homogeneous cells with unidirectionally aligned LCs regardless of the LC alignment directions. In the films, the PSPI polymer chains were found to undergo favorably unidirectional orientation via a specific orientation sequence of the polymer chain segments led by the directionally selective trans-cis photoisomerization of the stilbene chromophore units in the backbone induced by LPUVL exposure. Such unidirectionally oriented polymer chains of the films induce alignment of the LCs along the orientation direction of the polymer chains via favorable anisotropic molecular interactions between the oriented polymer chain segments and the LC molecules. In addition, the PSPI has an excellent film formation processibility; good quality PSPI thin films with a smooth surface are easily produced by simple spin-coating of the soluble poly(amic acid) precursor and subsequent thermal imidization process. In summary, this new PSPI is the promising LC alignment layer candidate with rubbing-free processing for the production of advanced LC display devices, including LC display televisions with large display areas.     

Effect of orientation on the relative dispersion of PMDA-ODA polyimide and polypropylene

The relative dispersion of birefringence, D_b, is determined for isotactic polypropylene and Kapton HA PMDA-ODA polyimide films. D_b is then used to identify the dependence of dispersion on the orientation of polymers and is interpreted in terms of fringe jumping. Optical relationships between the in-plane birefringence and wavelength are formulated to predict the in-plane birefringence of oriented Kapton HA PMDA-ODA polyimide films at any wavelength. These relations can be used for the direct comparison of the in-plane birefringence of Kapton PMDA-ODA polyimide films obtained from different optical techniques (i.e., polarized microscopy, polarized refractometry, wave guide coupling, etc.). © 1995 John Wiley & Sons, Inc.     

Bi-acylation of cellulose: determining the relative reactivities of the acetyl and fatty-acyl moieties

The global reaction between acetic anhydride and a fatty acid yields, at equilibrium, an asymmetric acetic-aliphatic anhydride in a medium containing finally: acetic-fatty anhydride, acetic anhydride, fatty acid, acetic acid and fatty anhydride. No solvent or catalyst was used to evaluate the impact of the actual reactivity of the anhydrides. The competition between the formation of acetyl and fatty acyl ester functions was evaluated by determining the ratio of acetyl/fatty acyl groups grafted on solid cellulose. The influence of temperature, reaction time, and length of fatty chain on the total degree of substitution and on the ratio of acetyl/fatty acyl ester functions was investigated. For the first time, a correlation has been established between esterification and the length of the aliphatic chain of the fatty acid. Reactivity of the medium decreased with the number of carbons in the fatty acid, raised to the power 2.37.     

Synthesis and applications of polymers containing metallacyclopentadiene moieties in the main chain

Organometallic polymers containing metallacycles in the main chain were prepared by the reactions of diynes with low-valent organometallic complexes such as CpCo(PPh₃)₂, CP₂Ti(CH₂=CHC₂H₅), and (ⁱPrO)₂Ti(CH₂=CHCH₃). Their polymer reactions involving the conversion of the main chain structures gave rise to polymers containing functional groups in their main chain repeating units. Design and synthesis of organometallic polymers that potentially serve as novel functional materials are also described.     

Synthesis and properties of polyurethanes bearing urethane moieties in the side chain

Polyurethanes bearing urethane groups in the side chains were prepared by the addition of isocyanates to the hydroxyl groups in poly(hydroxyurethane) prepared by the polyaddition of a bifunctional cyclic carbonate with 1,12‐diaminododecane. The urethanization proceeded quantitatively in the presence of a catalytic amount of di‐n‐butyltin dilaurate. The resulting polyurethane had a higher glass transition temperature than the original poly(hydroxyurethane), although its esterified product had a lower glass transition temperature. The urethanization with 3‐(triethoxysilyl)propyl isocyanate also proceeded effectively to afford both soluble and insoluble polymers, depending on the reaction conditions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3408–3414, 2007     

Synthesis of polyester and copolyesters having amino acid moieties in the main chain

N, N-di (2-hydroxyethyl)-3-aminopropionic acid (M3) was synthesized and used for the preparation of a series of polyesters having amino acid moieties in the main chain and carboxyl groups as the side group. Polycondensation of M3 , diols, bisphenol A, and isophthaloyl dichloride were performed in the presence of tertiary amine by solution and interfacial methods. Molecular weights of the polymers obtained by the solution method were not high, because oligomers produced at the early stage of reaction are ionized by H⁺ ions from the by-product, and become nonreactive triethylamine hydrochloride. Polymers with high M?_w (1–10 × 10⁴) were obtained in a high yield by organic/organic two-phase interfacial polycondensation using DMAc and n-heptane as solvents. The combined nucleophilic and basic complex catalytic action of N, N, N′, N′-tetramethyl ethyiene diamine (TEMED) is suggested for the present organic phase/organic phase interfacial polycondensation. This method can be applied for the preparation of novel functional polyesters. © 1994 John Wiley & Sons, Inc.     

Compliant rubber domains in a rigid polymer matrix: Shape and orientation factors related to cavitation and plastic dissipation

The hydrostatic stress in compliant rubber inclusions embedded in a rigid polymer matrix is evaluated for various shapes and orientations of the rubber domains and triaxialities of the remote stress tensor to determine the propensity of the inclusions to undergo cavitation. The first section analyzes the case of rubber particles of an ellipsoidal shape assuming linear elasticity of the matrix and small strains. It is shown that flat shapes, of which the long axis lies perpendicular to the direction of the maximum principal stress, are subjected to the highest levels of hydrostatic stress. The pressure induced by the deviatoric part of the remote stress tensor in the compliant rubber domains depends strongly on their shape and orientation, whereas the pressure induced by the hydrostatic part of the tensor is almost insensitive to the shape and orientation of the compliant domains. The second section examines the stress concentrations for elastoplasticity and plastic dissipation in the matrix. It is found that spherical inclusions ensure the best compromise between the early occurrence of plasticity and large amounts of plastic dissipation. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1476–1486, 2004     

Amperometric detection of DNA hybridization on a gold surface depends on the orientation of oligonucleotide chains

We tested the possibility of amperometric detection of DNA hybridization on a gold surface influenced by the immobilization of oligonucleotide giving different orientations of single stranded DNA relative to the gold surface. The DNA sensor was fabricated by chemisorption of 18-mer oligonucleotide modified by a phosphorothioate group either at its 3' or both 3' and 5' terminal. After immobilization of oligonucleotide to the gold support, the sensor was immersed in 11-mercaptoundecanoic acid (MUA) solution. Further chemisorption of MUA resulted in approximately 10-fold increase of resistance of the organic layer. Addition of complementary oligonucleotide resulted in an increase of conductivity for DNA sensor oriented perpendicular to the gold support (DNA with one thiol group), while the conductance decreased for DNA sensor with single stranded DNA oriented parallel to the gold support (with DNA modified by thiol groups at both 3' and 5' terminals). Addition of non-complementary chain resulted a slight decrease or no change of sensor conductivity. The hybridization process at both types of DNA orientations is not cooperative and can be described by Langmuir isotherms. The hybridization event on gold support has been confirmed by mass detection using the quartz crystal microbalance technique.     

Iron catalyzed polyethylene chain growth on zinc: a study of the factors delineating chain transfer versus catalyzed chain growth in zinc and related metal alkyl systems

The bis(imino)pyridine iron complex, [[2,6-(MeC=N-2,6-iPr2C6H3)2C5H)N]FeCl2] (1), in combination with MAO and ZnEt2 (> 500 equiv.), is shown to catalyze polyethylene chain growth on zinc. The catalyzed chain growth process is characterized by an exceptionally fast and reversible exchange of the growing polymer chains between the iron and zinc centers. Upon hydrolysis of the resultant ZnR2 product, a Poisson distribution of linear alkanes is obtained; linear alpha-olefins with a Poisson distribution can be generated via a nickel-catalyzed displacement reaction. Other dialkylzinc reagents such as ZnMe2 and ZniPr2 also show catalyzed chain growth; in the case of ZnMe2 a slight broadening of the product distribution is observed. The products obtained from Zn(CH2Ph)2 show evidence for chain transfer but not catalyzed chain growth, whereas ZnPh2 shows no evidence for chain transfer. The Group 13 metal alkyl reagents AlR3 (R = Me, Et, octyl, IBu) and GaR3 (R = Et, nBu) act as highly efficient chain transfer agents, whereas GaMe3 exhibits behavior close to catalyzed chain growth. LinBu, MgnBu2 and BEt3 result in very low activity catalyst systems. SnMe4 and PbEt4 give active catalysts, but with very little chain transfer to Sn or Pb. The remarkably efficient iron catalyzed chain growth reaction for ZnEt2 compared to other metal alkyls can be rationalized on the basis of: (1) relatively low steric hindrance around the zinc center, (2) their monomeric nature in solution, (3) the relatively weak Zn-C bond, and (4) a reasonably close match in Zn-C and Fe-C bond strengths.     

Syntheses and electrical conductivity of polyamides containing tetrathiafulvalene moieties in the main chain

Novel polyamides that contain tetrathiafulvalene (TTF) moieties were synthesized by direct polycondensation of Δ^2,2′ -bi-1,3-dithiole-4,4′(5′)-dicarboxylic acid with aromatic diamines in the presence of triphenylphosphine, hexachloroethane, and pyridine. Complexes of these polyamides with bromine were TTF cation radical () salts which resulted from the charge transfer of TTF moieties to bromine. The electrical conductivity of undoped polyamides increased with a decrease in diamine length. By doping the bromine the conductivity of the polyamides was enhanced by 3–5 orders of magnitude and reached 10^?5–;10^?9S cm^?1. Maximum conductivity was observed at the doping ratio of [Br]/[repeat unit] < 1. The electrical conduction in the bromine complexes may be attributed to the hopping of odd electrons of between TTF moieties.