Investigation of noble metal nanoparticle ζ-potential effects on single-cell exocytosis function in vitro with carbon-fiber microelectrode amperometry

Since noble metal nanoparticles are increasingly found in consumer goods, there is a need for information about potential impacts of these nanoparticles on cellular function to avoid environmental and health risks associated with exposure. In this study, spherical Au and Ag nanoparticles of similar size were synthesized and modified to assess the effects of ζ-potential on immune cell function. Nanoparticle ζ-potential was controlled by employing surfactant exchange to generate nanoparticles with positive or negative surface charge. Mouse peritoneal mast cells (MPMCs) were then exposed to 5-15 μg ml(-1) of these nanomaterials, and uptake was assessed by inductively coupled plasma-atomic emission spectroscopy (ICP-AES). Uptake for positively charged nanoparticles was more efficient than for negatively charged nanomaterials, and all nanoparticles were taken up in a concentration-dependent manner. Following uptake, MPMC degranulation function was assessed using carbon-fiber microelectrode amperometry (CFMA), showing decreased quantal secretion of serotonin by MPMCs exposed to the positively charged Au nanoparticles and negatively charged Ag nanoparticles. The overall efficiency of the degranulation process (indicated by amperometric spike frequency) decreased for all Au-exposed MPMCs. However, only the negatively charged version of the Ag nanomaterial resulted in decreased MPMC degranulation efficiency. Further studies revealed that ionic Ag was partially responsible for the observed effects. Overall, these studies reveal the complex nature of interactions between noble metal nanomaterials and cells that result in perturbed cellular function and illustrate the necessity of thorough nanoparticle characterization for interpretation of cellular function assays.     

Positive surface charge enhances selective cellular uptake and anticancer efficacy of selenium nanoparticles

Surface charge plays a key role in cellular uptake and biological actions of nanomaterials. Selenium nanoparticles (SeNPs) are novel Se species with potent anticancer activity and low toxicity. This study constructed positively charged SeNPs by chitosan surface decoration to achieve selective cellular uptake and enhanced anticancer efficacy. The results of structure characterization revealed that hydroxyl groups in chitosan reacted with SeO(3)(2-) ion to form special chain-shaped intermediates, which could be decomposed to form crystals upon reduction by ascorbic acid. The initial colloids nucleated and then assembled into spherical SeNPs. The positive charge of the NH(3)(+) group on the outer surface of the nanoparticles contributed to the high stability in aqueous solutions. Moreover, a panel of four human cancer cell lines were found to be susceptible to SeNPs, with IC(50) values ranging from 22.7 to 49.3 μM. Chitosan surface decoration of SeNPs significantly enhanced the selective uptake by endocytosis in cancer cells and thus amplified the anticancer efficacy. Treatment of the A375 melanoma cells with chitosan-SeNPs led to dose-dependent apoptosis, as evidenced by DNA fragmentation and phosphatidylserine translocation. Our results suggest that the use of positively charged chitosan as a surface decorator could be a simple and attractive approach to achieve selective uptake and anticancer action of nanomaterials in cancer cells.     

Surface Roughness and Charge Influence the Uptake of Nanoparticles: Fluorescently Labeled Pickering‐Type Versus Surfactant‐Stabilized Nanoparticles

The influence of surface roughness and charge on the cellular uptake of nanoparticles in HeLa cells is investigated with fluorescent, oppositely charged, rough, and smooth nanoparticles. Flow cytometry, cLSM, and TEM reveal that rough nanoparticles are internalized by the cells more slowly and by an unidentified uptake route as no predominant endocytosis route is blocked by a variety of inhibitory drugs, while the uptake of smooth nanoparticles is strongly dependent on dynamin, F‐actin, and lipid‐raft. Negatively charged nanoparticles are taken up to a higher extent than positively charged ones, independent of the surface roughness.

     

BSA adsorption on differently charged polystyrene nanoparticles using isothermal titration calorimetry and the influence on cellular uptake

BSA adsorption onto negatively and positively charged polystyrene nanoparticles was investigated. The nanoparticles were characterized in terms of particle size, zeta potential, surface group density, and morphology. The adsorption behavior of BSA on the particle surface, as a function of pH and overall charge of the particle, was studied using ITC. Different thermodynamic data such as enthalpy changes upon binding and stoichiometry of the systems were determined and discussed. The degree of surface coverage with BSA was calculated using the thermodynamic data. The cellular uptake of particles before and after BSA adsorption was studied using HeLa cells in the presence and absence of supplemented FCS in the cell culture medium.     

Polyaspartamide derivative nanoparticles with tunable surface charge achieve highly efficient cellular uptake and low cytotoxicity

Cationic nanocarrier mediated intracellular therapeutic agent delivery acts as a double-edged sword: the carriers promote cellular uptake, but interact nonspecifically and strongly with negatively charged endogenic proteins and cell membranes, which results in aggregates and high cytotoxicity. The present study was aimed at exploring zwitterionic polyaspartamide derivative nanoparticles for efficient intracellular delivery with low cytotoxicity. Poly(aspartic acid) partially grafted tetraethylenepentamine (PASP-pg-TEPA) with different isoelectric points (IEPs) was synthesized. The PASP-pg-TEPA formed zwitterionic nanoparticles with an irregular core and a well-defined shell structure in aqueous medium. Their particle size decreased from about 300 to 80 nm with an increase of the IEP from 7.5 to 9.1. The surface charge of the PASP-pg-TEPA nanoparticles could be tuned from positive to negative with a change of the pH of the medium. The nanoparticles with an IEP above 8.5 exhibited good stability under simulated physiological conditions. It was noted that the zwitterionic PASP-pg-TEPA nanoparticles displayed highly efficient cellular uptake in HeLa cells (approximately 99%) in serum-containing medium and did not adversely affect the cell viability at concentrations up to 1 mg/mL. Furthermore, thermodynamic analysis using isothermal titration calorimetry provided direct evidence that these zwitterionic nanoparticles had low binding affinities for serum protein. Therefore, the zwitterionic PASP-pg-TEPA nanoparticles could overcome limitations of cationic nanocarriers and achieve efficient intracellular delivery with low cytotoxicity.     

A multifunctional nanocarrier based on nanogated mesoporous silica for enhanced tumor-specific uptake and intracellular delivery

A multifunctional drug delivery system based on MCM-41-type mesoporous silica nanoparticles is described that behaves as if nanogates were covalently attached to the outlets of the mesopores through a highly acid-sensitive benzoic-imine linker. Tumor-specific uptake and intracellular delivery results from the pH-dependent progressive hydrolysis of the benzoic-imine linkage that starts at tumor extracellular pH = 6.8 and increases with decreasing pH. The cleavage of the benzoic-imine bond leads to the removal of the polypseudorotaxane caps and subsequent release of the payload drugs at tumor sites. At the same time, the carrier surface becomes positively charged, which further facilitates cellular uptake of the nanocarriers, thus offering a tremendous potential for targeted tumor therapy.     

Application of TPGS in polymeric nanoparticulate drug delivery system

d-alpha-Tocopheryl polyethylene glycol 1000 succinate (TPGS) has great potential in pharmacology and nanotechnology. The present work investigated the molecular behaviour of TPGS at the air-water interface, its effect on a model bio-membrane composed of dipalmitoylphosphatidylcholine (DPPC) lipid monolayer, and the interaction between the TPGS coated nanoparticles with the lipid model membrane. Paclitaxel loaded polymeric nanoparticles with TPGS as surfactant stabiliser were fabricated and characterised in terms of their drug incorporation capability and release kinetics. The result showed that TPGS exhibited notable effect on the surface properties of air-water interface as well as the lipid monolayer. The inter-particle force and the interaction between nanoparticles and lipid monolayer varied with the surface substance. The penetration of various nanoparticles into the model membrane indicated that an optimal balance between hydrophilicity and hydrophobicity on nanoparticle surface is needed to achieve an effective cellular uptake of nanoparticles. The results also demonstrate that the drug incorporation capability and the release characteristics of drug-loaded nanoparticles can be influenced by surfactant stabiliser.     

Preparation, characterization and in vitro release study of carvacrol-loaded chitosan nanoparticles

The fabrication of carvacrol-loaded chitosan nanoparticles was achieved by a two-step method, i.e., oil-in-water emulsion and ionic gelation of chitosan with pentasodium tripolyphosphate. The obtained particles possessed encapsulation efficiency (EE) and loading capacity (LC) in the ranges of 14-31% and 3-21%, respectively, when the initial carvacrol content was 0.25-1.25 g/g of chitosan. The individual particles exhibited a spherical shape with an average diameter of 40-80 nm, and a positively charged surface with a zeta potential value of 25-29 mV. The increment of initial carvacrol content caused a reduction of surface charge. Carvacrol-loaded chitosan nanoparticles showed antimicrobial activity against Staphylococcus aureus, Bacillus cereus and Escherichia coli with an MIC of 0.257 mg/mL. The release of carvacrol from chitosan nanoparticles reached plateau level on day 30, with release amounts of 53% in acetate buffer solution with pH of 3, and 23% and 33% in phosphate buffer solutions with pH of 7 and 11, respectively. The release mechanism followed a Fickian behavior. The release rate was superior in an acidic medium to either alkaline or neutral media, respectively.     

Target-specific cellular uptake of PLGA nanoparticles coated with poly(L-lysine)-poly(ethylene glycol)-folate conjugate

Poly(D,L-lactic-co-glycolic acid) (PLGA) nanoparticles with anionic surface charge were surface coated with cationic di-block copolymer, poly(L-lysine)-poly(ethylene glycol)-folate (PLL-PEG-FOL) conjugate, for enhancing their site-specific intracellular delivery against folate receptor overexpressing cancer cells. The PLGA nanoparticles coated with the conjugate were characterized in terms of size, surface charge, and change in surface composition by XPS. By employing the flow cytometry method and confocal image analysis, the extent of cellular uptake was comparatively evaluated under various conditions. PLL-PEG-FOL coated PLGA nanoparticles demonstrated far greater extent of cellular uptake to KB cells, suggesting that they were mainly taken up by folate receptor-mediated endocytosis. The enhanced cellular uptake was also observed even in the presence of serum proteins, possibly due to the densely seeded PEG chains. The PLL-PEG-FOL coated PLGA nanoparticles could be potentially applied for cancer cell targeted delivery of various therapeutic agents.     

Probing the effects of interfacial chemistry on the kinetics of phase transitions in amorphous and tetragonal zirconia nanocrystals

In this work, we examine the phase stability of both uncoated and alumina-coated zirconia nanoparticles using in-situ X-ray diffraction. By tracking structural changes in these particles, we seek to understand how changing interfacial bonding affects the kinetics of amorphous zirconia crystallization and the kinetics of grain growth in both initially amorphous and initially crystalline zirconia nanocrystals. Activation energies associated with crystallization are calculated using nonisothermal kinetic methods. The crystallization of the uncoated amorphous zirconia colloids has an activation energy of 117 +/- 13 kJ/mol, while that for the alumina-coated amorphous colloids is 185 +/- 28 kJ/mol. This increase in activation energy is attributed to inhibition of atomic rearrangement imparted by the alumina coating. The kinetics of grain growth are also studied with nonisothermal kinetic methods. The alumina coating again dramatically affects the activation energies. For colloids that were coated with alumina when they were in an amorphous structure, the coating imparts a 5x increase in the activation energy for grain growth (33 +/- 8 versus 150 +/- 30 kJ/mol). This increase shows that the alumina coating inhibits zirconia cores from coarsening. When the colloids are synthesized in the tetragonal phase and then coated with alumina, the effect of surface coating on coarsening kinetics is even more dramatic. In this case, a 10x increase in activation energies, from 28 +/- 3 kJ/mol for the uncoated particles to 300 +/- 25 kJ/mol for the alumina-coated crystallites, is found. The results show that one can alter phase stability in colloidal systems by using surface coatings and interfacial energy to dramatically change the kinetic barriers to structural rearrangement.     

聚合物纳米粒子的结构和性能对胞吞和细胞功能的影响

随着纳米医学的发展,越来越多的聚合物纳米粒子被用作荧光探针和药物或基因的载体,在生物分析、检测以及药物传输和基因治疗等领域得到应用。细胞的胞吞是细胞将细胞外基质、病毒、微组织或纳米粒子运送到细胞内部的一个重要生理过程。研究细胞对纳米粒子的胞吞,有助于从细胞层次上理解生命现象,掌握细胞内治疗的机理。本文综述了近几年来细胞和聚合物纳米粒子之间相互作用的最新研究结果。首先介绍了用于胞吞研究的常用聚合物纳米粒子体系及其功能化方法,尤其是荧光探针的复合与表面修饰。进而介绍了细胞和聚合物纳米粒子之间相互作用的基本过程,包括聚合物纳米粒子在细胞转运过程中的驱动力、细胞内转运过程、在细胞中的分布及其细胞毒性。对影响聚合物纳米微粒胞吞的因素如纳米粒子浓度、共培养时间、纳米粒子性能（形状、粒径、电荷和PEG修饰）、细胞类型和培养条件等进行了总结。最后重点介绍了用于受体介导细胞胞吞的聚合物纳米粒子体系,指出了目前研究工作中的不足及未来发展方向。     

Multiplexed screening of cellular uptake of gold nanoparticles using laser desorption/ionization mass spectrometry

Gold nanoparticles (AuNPs) are highly promising candidates as drug delivery agents into cells of interest. We describe for the first time the multiplexed analysis of nanoparticle uptake by cells using mass spectrometry. We demonstrate that the cellular uptake of functionalized gold nanoparticles with cationic or neutral surface ligands can be readily determined using laser desorption/ionization mass spectrometry of cell lysates. The surface ligands have "mass barcodes" that allow different nanoparticles to be simultaneously identified and quantified at levels as low as 30 pmol. Using this method, we find that subtle changes to AuNP surface functionalities can lead to measurable changes in cellular uptake propensities.     

Cytotoxicity induced by engineered silver nanocrystallites is dependent on surface coatings and cell types

Due to their unique antimicrobial properties silver nanocrystallites have garnered substantial attention and are used extensively for biomedical applications as an additive to wound dressings, surgical instruments and bone substitute materials. They are also released into unintended locations such as the environment or biosphere. Therefore it is imperative to understand the potential interactions, fate and transport of nanoparticles with environmental biotic systems. Numerous factors including the composition, size, shape, surface charge, and capping molecule of nanoparticles are known to influence cell cytotoxicity. Our results demonstrate that the physical/chemical properties of the silver nanoparticles including surface charge, differential binding and aggregation potential, which are influenced by the surface coatings, are a major determining factor in eliciting cytotoxicity and in dictating potential cellular interactions. In the present investigation, silver nanocrystallites with nearly uniform size and shape distribution but with different surface coatings, imparting overall high negativity to high positivity, were synthesized. These nanoparticles included poly(diallyldimethylammonium) chloride-Ag, biogenic-Ag, colloidal-Ag (uncoated), and oleate-Ag with zeta potentials +45 ± 5, -12 ± 2, -42 ± 5, and -45 ± 5 mV, respectively; the particles were purified and thoroughly characterized so as to avoid false cytotoxicity interpretations. A systematic investigation on the cytotoxic effects, cellular response, and membrane damage caused by these four different silver nanoparticles was carried out using multiple toxicity measurements on mouse macrophage (RAW-264.7) and lung epithelial (C-10) cell lines. Our results clearly indicate that the cytotoxicity was dependent on various factors such as surface charge and coating materials used in the synthesis, particle aggregation, and the cell-type for the different silver nanoparticles that were investigated. Poly(diallyldimethylammonium)-coated Ag nanoparticles were found to be the most toxic, followed by biogenic-Ag and oleate-Ag nanoparticles, whereas uncoated or colloidal silver nanoparticles were found to be the least toxic to both macrophage and lung epithelial cells. Also, based on our cytotoxicity interpretations, lung epithelial cells were found to be more resistant to the silver nanoparticles than the macrophage cells, regardless of the surface coating.     

Influence of organic coatings on pyrene ozonolysis at the air-aqueous interface

Glancing angle laser-induced fluorescence was used to investigate the effects of organic monolayer coatings on the ozonation kinetics of pyrene at the air-aqueous interface. Fluorescence spectra show that both 1-octanol and octanoic acid coatings give rise to similar decreased polarity at the interface relative to the uncoated surface and show a similar propensity of pyrene to partition to the interface. Ozonation kinetics follow a Langmuir-Hinshelwood mechanism, indicating a surface reaction. At high ozone concentrations, a monolayer coating of 1-octanol enhances the rate relative to the uncoated surface and a coating of octanoic acid decreases the rate. Pyrene fluorescence is most efficiently quenched by ozone in the presence of a 1-octanol coating, followed by the uncoated surface, and least efficiently quenched by ozone in the presence of octanoic acid. In agreement with earlier work, a significant photoenhancement of the ozonation is observed at the uncoated surface; however, no enhancement is observed with monolayer coatings of either organic. Quantum chemical calculations indicate a reasonable binding of ozone by the carboxylic acid group (in both its dissociated and undissociated forms). We suggest that the inhibition of the water surface reaction by a monolayer of octanoic acid is due to the sequestration of ozone by the carboxylic acid group.     

Tuning the Surface of Nanoparticles: Impact of Poly(2‐ethyl‐2‐oxazoline) on Protein Adsorption in Serum and Cellular Uptake

Due to the adsorption of biomolecules, the control of the biodistribution of nanoparticles is still one of the major challenges of nanomedicine. Poly(2‐ethyl‐2‐oxazoline) (PEtOx) for surface modification of nanoparticles is applied and both protein adsorption and cellular uptake of PEtOxylated nanoparticles versus nanoparticles coated with poly(ethylene glycol) (PEG) and non‐coated positively and negatively charged nanoparticles are compared. Therefore, fluorescent poly(organosiloxane) nanoparticles of 15 nm radius are synthesized, which are used as a scaffold for surface modification in a grafting onto approach. With multi‐angle dynamic light scattering, asymmetrical flow field‐flow fractionation, gel electrophoresis, and liquid chromatography‐mass spectrometry, it is demonstrated that protein adsorption on PEtOxylated nanoparticles is extremely low, similar as on PEGylated nanoparticles. Moreover, quantitative microscopy reveals that PEtOxylation significantly reduces the non‐specific cellular uptake, particularly by macrophage‐like cells. Collectively, studies demonstrate that PEtOx is a very effective alternative to PEG for stealth modification of the surface of nanoparticles.

     

Rapid monoclonal antibody adsorption on dextran-grafted agarose media for ion-exchange chromatography

The binding capacity and adsorption kinetics of a monoclonal antibody (mAb) are measured for experimental cation exchangers obtained by grafting dextran polymers to agarose beads and compared with measurements for two commercial agarose-based cation exchangers with and without dextran grafts. Introduction of charged dextran polymers results in enhanced adsorption kinetics despite a dramatic reduction of the accessible pore size as determined by inverse size-exclusion chromatography. Incorporation of neutral dextran polymers in a charged agarose bead results instead in substantially lower binding capacities. The effective pore diffusivities obtained from batch uptake curves increase substantially as the protein concentration is reduced for the resins containing charged dextran grafts, but are much less dependent on protein concentration for the resins with no dextran or uncharged dextran grafts. The batch uptake results are corroborated by microscopic observations of transient adsorption in individual particles. In all cases studied, the adsorption kinetics is characterized by a sharp adsorption front consistent with a shell-progressive, diffusion limited mechanism. Greatly enhanced transport rates are obtained with an experimental resin containing charged dextran grafts with effective pore diffusivities that are 1-9 times larger than the free solution diffusivity and adsorption capacity approaching 300 mg/cm3 of particle volume.     

Design and development of quantum dots and other nanoparticles based cellular imaging probe

One goal of nanotechnology is to prepare cellular nanoprobes for various biological applications where conventional molecular probes fall short of long-term stability and simultaneous detection of multiple signals. Successful development of cellular nanoprobes requires the availability of a library of functional nanoparticles, knowledge of their interactions with cells and mechanism of cellular entry and to modulate these interactions by appropriate design of surface functionality. Although a great deal of research has been done in past 15 years, only limited success has been achieved in live cell labeling with high specificity, sub-cellular targeting and single molecule trafficking. This article focuses on the author's effort in making cellular imaging nanoprobes from different nanoparticles and discusses the most critical issues in the context of current knowledge, such as different variables that often influence labeling, non-specific binding/uptake of nanoprobes and specific live cell labeling. Finally, the important role of coating chemistry to overcome these problems has been highlighted and some successful labeling results have been summarized.     

Surface functionalization of silica nanoparticles supports colloidal stability in physiological media and facilitates internalization in cells

The influence of the surface functionalization of silica particles on their colloidal stability in physiological media is studied and correlated with their uptake in cells. The surface of 55 ± 2 nm diameter silica particles is functionalized by amino acids or amino- or poly(ethylene glycol) (PEG)-terminated alkoxysilanes to adjust the zeta potential from highly negative to positive values in ethanol. A transfer of the particles into water, physiological buffers, and cell culture media reduces the absolute value of the zeta potential and changes the colloidal stability. Particles stabilized by L-arginine, L-lysine, and amino silanes with short alkyl chains are only moderately stable in water and partially in PBS or TRIS buffer, but aggregate in cell culture media. Nonfunctionalized, N-(6-aminohexyl)-3-aminopropyltrimethoxy silane (AHAPS), and PEG-functionalized particles are stable in all media under study. The high colloidal stability of positively charged AHAPS-functionalized particles scales with the ionic strength of the media, indicating a mainly electrostatical stabilization. PEG-functionalized particles show, independently from the ionic strength, no or only minor aggregation due to additional steric stabilization. AHAPS stabilized particles are readily taken up by HeLa cells, likely as the positive zeta potential enhances the association with the negatively charged cell membrane. Positively charged particles stabilized by short alkyl chain aminosilanes adsorb on the cell membrane, but are weakly taken up, since aggregation inhibits their transport. Nonfunctionalized particles are barely taken up and PEG-stabilized particles are not taken up at all into HeLa cells, despite their high colloidal stability. The results indicate that a high colloidal stability of nanoparticles combined with an initial charge-driven adsorption on the cell membrane is essential for efficient cellular uptake.     

Uptake mechanism of oppositely charged fluorescent nanoparticles in HeLa cells

The endocytotic mechanisms involved in the uptake of charged polystyrene nanoparticles into HeLa cells were investigated. Uptake experiments were done in the presence or absence of drugs known to inhibit various factors in endocytosis. Independent of the particle charge, endocytosis is highly dependent on dynamin, F-actin, and tyrosine-specific protein kinases, which suggests a dynamin-dependent and lipid raft-dependent mechanism. However, cholesterol depletion did not hinder particle uptake. Regarding positively charged particles, macropinocytosis, the microtubule network, and cyclooxygenases are also involved. The clathrin-dependent pathway plays a minor role.     

Towards nanoscale composite particles of dual complexity

The fabrication of heteroaggregates comprising inorganic and organic nanoparticles of different sizes is reported. Control over the assembly of nanoscale functional building units is of great significance to many practical applications. Joining together different spherical nanoparticles in a defined manner allows control over the shape of the composites. If two types of constituents are chosen that differ in size, the surfaces of the composites exhibit two specific radii of curvature, yielding aggregates of dual surface roughness. Moreover, if the constituents consist of different materials, the resulting heteroaggregates feature both compositional and interfacial anisotropy, offering unprecedented perspectives for custom-tailored colloids. This study describes a two-step approach towards such designer particles. At first, amine-modified polystyrene particles with 154 nm diameter were assembled into clusters of well-defined configurations. Onto these, oppositely charged inorganic particles with diameters of only a few nanometres were deposited by direct uptake from solution, resulting in numerous functional entities all over the surface of the polymer clusters. Despite the fact that oppositely charged constituents are brought together, charge reversal by uptake of nanoparticles allows for stable suspensions of heterocomposites. Hence, the possibility to assemble particles into nanoscale heterocomposites with full control over shape, composition, and surface roughness is demonstrated.