Molten salt synthesis and characterization of fast ion conductor Li<Subscript>6.75</Subscript>La<Subscript>3</Subscript>Zr<Subscript>1.75</Subscript>Ta<Subscript>0.25</Subscript>O<Subscript>12</Subscript>

The limited electrochemical stability and the flammability of the liquid electrolytes presently used in Li-ion batteries stimulates the search for alternatives including ceramic solid electrolytes. Moreover, solid electrolytes also fulfil crucial functions in various large-scale energy storage systems, e.g. as anode-protecting membranes in aqueous Li-air batteries. Here, the processing of the solid electrolytes Li₇La₃Zr₂O₁₂ is studied for applications in Li-air batteries. Molten salt method (MSM) was adopted previously on synthesis of simple oxides; to the best of our knowledge, we report for the first time the adaptation of the MSM to prepare this class of solid electrolytes. As a model compound, we prepared the garnet-related Li_6.75La₃Zr_1.75Ta_0.25O₁₂. It has been prepared by using stoichiometric amounts of La₂O₃, ZrCl₄, and Ta₂O₅ in excess 0.88 M LiNO₃:0.12 M LiCl molten salt. Subsequently, samples were heated to various temperatures in the range 600–900 °C for 6 h in air in a recrystallized alumina crucible and finally washed with distilled water to remove excess salts. The obtained Li_6.75La₃Zr_1.75Ta_0.25O₁₂ electrolyte powder was characterized by X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, Raman, and impedance spectroscopy as well as surface area measurements. The cubic single phase was obtained for samples prepared at temperatures ≥700 °C. The effects of washing with water or aqueous LiOH solution on the structure and conductivity of the phases will be discussed.     

Li7P3S11电解质的合成、传导及应用

固态电解质是固态电池中的关键材料,开发具有高离子电导率、高化学/电化学稳定性、电极兼容性良好的固态电解质正成为研究热点。硫化物固态电解质相较其它固态电解质具有更高的离子电导率和良好的机械加工性能等优势,是最有前景实现实用化的固态电解质之一。在众多硫化物固态电解质中,Li₇P₃S₁₁因其高的离子电导率和较低的原料成本而极具研究意义。本文首先介绍了Li₇P₃S₁₁电解质的结构、Li+传导机理及合成路径;其次,针对该电解质的电导率提高、空气/水稳定性提升、固固界面稳定性及电解质自身稳定性改善等问题,综述了目前常用的改性策略研究;再次,总结了基于Li₇P₃S₁₁电解质的全固态锂离子电池和全固态锂硫电池的构筑;最后,本文分析了Li₇P₃S₁₁电解质的研究和应用面临的挑战,并指出该电解质未来发展的趋势。     

Surface Lattice Modulation Enables Stable Cycling of High-Loading All-solid-state Batteries at High Voltages

Halide solid electrolytes, known for their high ionic conductivity at room temperature and good oxidative stability, face notable challenges in all–solid–state Li–ion batteries (ASSBs), especially with unstable cathode/solid electrolyte (SE) interface and increasing interfacial resistance during cycling. In this work, we have developed an Al³⁺–doped, cation–disordered epitaxial nanolayer on the LiCoO₂ surface by reacting it with an artificially constructed AlPO₄ nanoshell; this lithium–deficient layer featuring a rock–salt–like phase effectively suppresses oxidative decomposition of Li₃InCl₆ electrolyte and stabilizes the cathode/SE interface at 4.5 V. The ASSBs with the halide electrolyte Li₃InCl₆ and a high–loading LiCoO₂ cathode demonstrated high discharge capacity and long cycling life from 3 to 4.5 V. Our findings emphasize the importance of specialized cathode surface modification in preventing SE degradation and achieving stable cycling of halide–based ASSBs at high voltages.     

Armor-like Inorganic-rich Cathode Electrolyte Interphase Enabled by the Pentafluorophenylboronic Acid Additive for High-voltage Li||NCM622 Batteries

Lithium metal batteries (LMBs) comprising Li metal anode and high-voltage nickel-rich cathode could potentially realize high capacity and power density. However, suitable electrolytes to tolerate the oxidation on the cathode at high cut-off voltage are urgently needed. Herein, we present an armor-like inorganic-rich cathode electrolyte interphase (CEI) strategy for exploring oxidation-resistant electrolytes for sustaining 4.8 V Li||LiNi_0.6Co_0.2Mn_0.2O₂ (NCM622) batteries with pentafluorophenylboronic acid (PFPBA) as the additive. In such CEI, the armored lithium borate surrounded by CEI up-layer represses the dissolution of inner CEI moieties and also improves the Li⁺ conductivity of CEI while abundant LiF is distributed over whole CEI to enhance the mechanical stability and Li⁺ conductivity compared with polymer moieties. With such robust Li⁺ conductive CEI, the Li||NCM622 battery delivered excellent stability at 4.6 V cut-off voltage with 91.2 % capacity retention after 400 cycles. The excellent cycling performance was also obtained even at 4.8 V cut-off voltage.     

Lithium-ion Mobility in Li6B18(Li3N) and Li Vacancy Tuning in the Solid Solution Li6B18(Li3N)1−x(Li2O)x

All-solid-state batteries are promising candidates for safe energy-storage systems due to non-flammable solid electrolytes and the possibility to use metallic lithium as an anode. Thus, there is a challenge to design new solid electrolytes and to understand the principles of ion conduction on an atomic scale. We report on a new concept for compounds with high lithium ion mobility based on a rigid open-framework boron structure. The host–guest structure Li₆B₁₈(Li₃N) comprises large hexagonal pores filled with Li₇N] strands that represent a perfect cutout from the structure of α-Li₃N. Variable-temperature ⁷Li NMR spectroscopy reveals a very high Li mobility in the template phase with a remarkably low activation energy below 19 kJ mol⁻¹ and thus much lower than pristine Li₃N. The formation of the solid solution of Li₆B₁₈(Li₃N) and Li₆B₁₈(Li₂O) over the complete compositional range allows the tuning of lithium defects in the template structure that is not possible for pristine Li₃N and Li₂O.     

Impact of the Chlorination of Lithium Argyrodites on the Electrolyte/Cathode Interface in Solid-State Batteries

Lithium argyrodite-type electrolytes are regarded as promising electrolytes due to their high ionic conductivity and good processability. Chemical modifications to increase ionic conductivity have already been demonstrated, but the influence of these modifications on interfacial stability remains so far unknown. In this work, we study Li₆PS₅Cl and Li_5.5PS_4.5Cl_1.5 to investigate the influence of halogenation on the electrochemical decomposition of the solid electrolyte and the chemical degradation mechanism at the cathode interface in depth. Electrochemical measurements, gas analysis and time-of-flight secondary ion mass spectrometry indicate that the Li_5.5PS_4.5Cl_1.5 shows pronounced electrochemical decomposition at lower potentials. The chemical reaction at higher voltages leads to more gaseous degradation products, but a lower fraction of solid oxygenated phosphorous and sulfur species. This in turn leads to a decreased interfacial resistance and thus a higher cell performance.     

Lithium Ion Pathway within Li7La3Zr2O12‐Polyethylene Oxide Composite Electrolytes

Polymer–ceramic composite electrolytes are emerging as a promising solution to deliver high ionic conductivity, optimal mechanical properties, and good safety for developing high‐performance all‐solid‐state rechargeable batteries. Composite electrolytes have been prepared with cubic‐phase Li₇La₃Zr₂O₁₂ (LLZO) garnet and polyethylene oxide (PEO) and employed in symmetric lithium battery cells. By combining selective isotope labeling and high‐resolution solid‐state Li NMR, we are able to track Li ion pathways within LLZO‐PEO composite electrolytes by monitoring the replacement of ⁷Li in the composite electrolyte by ⁶Li from the ⁶Li metal electrodes during battery cycling. We have provided the first experimental evidence to show that Li ions favor the pathway through the LLZO ceramic phase instead of the PEO‐LLZO interface or PEO. This approach can be widely applied to study ion pathways in ionic conductors and to provide useful insights for developing composite materials for energy storage and harvesting.     

Etude par RMN de la mobilité du lithium dans trois oxydes à structure pseudo-bidimensionnelle: Li8SnO6, Li7NbO6 et Li6In2O6

The lithium ion mobility in three solid electrolytes (Li₈SnO₆, Li₇NbO₆, and Li₆In₂O₆) has been studied by NMR at several resonance frequencies from 170 to 500°K. The ⁷Li quadrupolar lineshape evolution shows the predominant influence on the conductivity mechanism of the vacancies in the octahedral sites of the oxygen close packing. In Li₈SnO₆, which has no vacancies, the lithium ions situated in the tetrahedral sites have the highest mobility. Spin-lattice relaxation times are in good agreement with the hypothesis of a Li₇NbO₆ 2D conductivity. The values of the activation energy, increasing from Li₇NbO₆ to Li₆In₂O₆ and to Li₈SnO₆, are found to be three times lower than those obtained from conductivity measurements.     

Lithium garnet based free-standing solid polymer composite membrane for rechargeable lithium battery

Electrolytes with high lithium-ion conductivity, better mechanical strength and large electrochemical window are essential for the realization of high-energy density lithium batteries. Polymer electrolytes are gaining interest due to their inherent flexibility and nonflammability over conventional liquid electrolytes. In this work, lithium garnet composite polymer electrolyte membrane (GCPEM) consisting of large molecular weight (W_avg ~?5?×?10⁶) polyethylene oxide (PEO) complexed with lithium perchlorate (LiClO₄) and lithium garnet oxide Li_6.28Al_0.24La₃Zr₂O₁₂ (Al-LLZO) is prepared by solution-casting method. Significant improvement in Li⁺ conductivity for Al-LLZO containing GCPEM is observed compared with the Al-LLZO free polymer membrane. Maximized room temperature (30 °C) Li⁺ conductivity of 4.40?×?10^?4 S cm^?1 and wide electrochemical window (4.5 V) is observed for PEO₈/LiClO₄?+?20 wt% Al-LLZO (GCPEM-20) membrane. The fabricated cell with LiCoO₂ as cathode, metallic lithium as anode and GCPEM-20 as electrolyte membrane delivers an initial charge/discharge capacity of 146 mAh g^?1/142 mAh g^?1 at 25 °C with 0.06 C-rate.     

Electron Redistribution Enables Redox-Resistible Li6PS5Cl towards High-Performance All-Solid-State Lithium Batteries

Sulfide electrolytes with high ionic conductivity hold great promise for all-solid-state lithium batteries. However, the parasitic redox reactions between sulfide electrolyte and Li metal result in interfacial instability and rapid decline of the battery performance. Herein, a redox-resistible Li₆PS₅Cl (LPSC) electrolyte is created by regulating the electron distribution in LPSC with Mg and F incorporation. The introduction of Mg triggers the electron agglomeration around S atom, inhibiting the electron acceptance from Li, and F generates the self-limiting interface, which hinders the redox reactions between LPSC and Li metal. This redox-resistible Li₆PS₅Cl-MgF₂ electrolyte therefore presents a high critical current density (2.3 times that of pristine electrolyte). The LiCoO₂/Li₆PS₅Cl-MgF₂/Li cell shows an outstanding cycling stability (93.3 %@100 cycles at 0.2 C). This study highlights the electronic structure modulation to address redox issues on sulfide-based lithium batteries.     

EC modified PEO/PVDF-LLZO composite electrolytes for solid state lithium metal batteries

The polymer-ceramic composite electrolytes have great application potential for next-generation solid state lithium batteries, as they have the merits to eliminate the problem of liquid organic electrolytes and enhancing chemical/electrochemical stability. However, polymer-ceramic composite electrolytes show poor ionic conductivity, which greatly hinders their practical applications. In this work, the addition of plasticizer ethylene carbonate (EC) into polymer-ceramic composite electrolyte for lithium batteries effectively promotes the ionic conductivity. A high ionic conductivity can be attained by adding 40 wt% EC to the polyethylene oxide (PEO)/polyvinylidene fluoride (PVDF)-Li₇La₃Zr₂O₁₂ (LLZO) based polymer-ceramic composite electrolytes, which is 2.64 × 10⁻⁴ S cm⁻¹ (tested at room temperature). Furthermore, the cell assembled with lithium metal anode, this composite electrolyte, and LiFePO₄ cathode can work more than 80 cycles at room temperature (tested at 0.2 C). The battery delivers a high reversible specific capacity after 89 cycles, which is 119 mAh g⁻¹.     

Vacancy‐Controlled Na+ Superion Conduction in Na11Sn2PS12

Highly conductive solid electrolytes are crucial to the development of efficient all‐solid‐state batteries. Meanwhile, the ion conductivities of lithium solid electrolytes match those of liquid electrolytes used in commercial Li⁺ ion batteries. However, concerns about the future availability and the price of lithium made Na⁺ ion conductors come into the spotlight in recent years. Here we present the superionic conductor Na₁₁Sn₂PS₁₂, which possesses a room temperature Na⁺ conductivity close to 4 mS cm^?1, thus the highest value known to date for sulfide‐based solids. Structure determination based on synchrotron X‐ray powder diffraction data proves the existence of Na⁺ vacancies. As confirmed by bond valence site energy calculations, the vacancies interconnect ion migration pathways in a 3D manner, hence enabling high Na⁺ conductivity. The results indicate that sodium electrolytes are about to equal the performance of their lithium counterparts.     

Back Cover: Low-Cost,High-Strength Cellulose-based Quasi-Solid Polymer Electrolyte for Solid-State Lithium-Metal Batteries (Angew. Chem. Int. Ed. 25/2023)

Solid-state lithium-metal batteries are considered as the next generation of high-energy-density batteries. However, their solid electrolytes suffer from low ionic conductivity, poor interface performance, and high production costs, restricting their commercial application. Herein, a low-cost cellulose acetate-based quasi-solid composite polymer electrolyte (C-CLA QPE) was developed with a high Li⁺ transference number ( ) of 0.85 and excellent interface stability. The prepared LiFePO₄ (LFP)|C-CLA QPE|Li batteries exhibited excellent cycle performance with a capacity retention of 97.7 % after 1200 cycles at 1 C and 25 °C. The experimental results and Density Function Theory (DFT) simulation revealed that the partially esterified side groups in the CLA matrix contribute to the migration of Li⁺ and enhance electrochemical stability. This work provides a promising strategy for fabricating cost-effective, stable polymer electrolytes for solid-state lithium batteries.     

Crystalline Structure and Electroconductivity of Solid Electrolytes Li3.75Ge0.75V0.25O4 and Li3.70Ge0.85W0.15O4

Crystalline structure of low- and high-temperature modifications of solid lithium-conducting electrolytes Li_3.75Ge_0.75V_0.25O₄ and Li_3.70Ge_0.85W_0.15O₄ are studied by powder neutron diffraction analysis with use made of Rietveld full-profile analysis. The structure of either composition is derivative from -Li₃PO₄. The high conductivity of the electrolytes is connected with the presence of interstitial lithium cations, whose positions are occupied but partially. Phase transitions in the electrolytes consist of the leveling of the occupation degrees of these positions and make practically no impact on the rigid cage of the lattice.     

Time-Temperature-Transformation (TTT) Diagram of Battery-Grade Li-Garnet Electrolytes for Low-Temperature Sustainable Synthesis

Efficient and affordable synthesis of Li⁺ functional ceramics is crucial for the scalable production of solid electrolytes for batteries. Li-garnet Li₇La₃Zr₂O_12−d (LLZO), especially its cubic phase (cLLZO), attracts attention due to its high Li⁺ conductivity and wide electrochemical stability window. However, high sintering temperatures raise concerns about the cathode interface stability, production costs, and energy consumption for scalable manufacture. We show an alternative “sinter-free” route to stabilize cLLZO as films at half of its sinter temperature. Specifically, we establish a time-temperature-transformation (TTT) diagram which captures the amorphous-to-crystalline LLZO transformation based on crystallization enthalpy analysis and confirm stabilization of thin-film cLLZO at record low temperatures of 500 °C. Our findings pave the way for low-temperature processing via TTT diagrams, which can be used for battery cell design targeting reduced carbon footprints in manufacturing.     

Variation in structure and Li<Superscript>+</Superscript>-ion migration in argyrodite-type Li<Subscript>6</Subscript>PS<Subscript>5</Subscript>X (X = Cl,Br, I) solid electrolytes

All-solid-state rechargeable lithium-ion batteries (AS-LIBs) are attractive power sources for electrochemical applications due to their potentiality in improving safety and stability over conventional batteries with liquid electrolytes. Finding a solid electrolyte with high ionic conductivity and compatibility with other battery components is a key factor in raising the performance of AS-LIBs. In this work, we prepare argyrodite-type Li₆PS₅X (X = Cl, Br, I) using mechanical milling followed by annealing. X-ray diffraction characterization reveals the formation and growth of crystalline Li₆PS₅X in all cases. Ionic conductivity of the order of 7?×?10^?4 S cm^?1 in Li₆PS₅Cl and Li₆PS₅Br renders these phases suitable for AS-LIBs. Joint structure refinements using high-resolution neutron and laboratory X-ray diffraction provide insight into the influence of disorder on the fast ionic conductivity. Besides the disorder in the lithium distribution, it is the disorder in the S^2?/Cl^? or S^2?/Br^? distribution that we find to promote ion mobility, whereas the large I^? cannot be exchanged for S^2? and the resulting more ordered Li₆PS₅I exhibits only a moderate conductivity. Li⁺ ion migration pathways in the crystalline compounds are modelled using the bond valence approach to interpret the differences between argyrodites containing different halide ions.     

Enabling the Operation of Highly Compatible LiI-3-Hydroxypropionitrile Small-Molecule Solid-State Electrolytes in Lithium Metal Batteries via Stepped-Amorphization Strategy

Integrating the advantages of both inorganic ceramic and organic polymer solid-state electrolytes, small-molecule solid-state electrolytes represented by LiI-3-hydroxypropionitrile (LiI-HPN) inorganic–organic hybrid systems possess good interfacial compatibility and high modulus. However, their lack of intrinsic Li⁺ conduction ability hinders potential application in lithium metal batteries until now, despite containing LiI phase composition. Herein, inspired by evolution tendency of ionic conduction behaviors together with first-principles molecular dynamics simulations, we propose a stepped-amorphization strategy to break the Li⁺ conduction bottleneck of LiI-HPN. It involves three progressive steps of composition (LiI-content increasing), time (long-time standing), and temperature (high-temperature melting) regulations, to essentially construct a small-molecule-based composite solid-state electrolyte with intensified amorphous degree, which realizes efficient conversion from an I⁻ to Li⁺ conductor and improved conductivity. As a proof, the stepped-optimized LiI-HPN is successfully operated in lithium metal batteries cooperated with Li₄Ti₅O₁₂ cathode to deliver considerable compatibility and stability over 250 cycles. This work not only clarifies the ionic conduction mechanisms of LiI-HPN inorganic–organic hybrid systems, but also provides a reasonable strategy to broaden the application scenarios of highly compatible small-molecule solid-state electrolytes.     

4.5 V High‐Voltage Rechargeable Batteries Enabled by the Reduction of Polarization on the Lithium Metal Anode

Lithium metal is used to achieve high‐energy‐density batteries due to its large theoretical capacity and low negative electrochemical potential. The introduction of quasi‐solid electrolytes simultaneously overcomes the safety problems induced by the liquid electrolytes and the high interfacial resistance issues confronted by all solid‐state electrolytes. In‐depth investigations involving interfacial behaviors in quasi‐solid lithium metal batteries are inadequate. Herein an ultrathin Li₃OCl quasi‐solid‐state electrolyte layer (500 nm thickness) is used to cover a lithium anode. The polarization of the anode is remarkably reduced by introducing the Li₃OCl quasi‐solid‐state electrolyte. In contrast to the decomposition of solvents in a standard electrolyte (EC‐DEC,1.0 m LiPF₆), the established quasi‐solid‐state electrolyte interfaces can significantly inhibit the decomposition of solvents when the cut‐off voltage is 4.5 V.     

Water‐Mediated Synthesis of a Superionic Halide Solid Electrolyte

To promote the development of solid‐state batteries, polymer‐, oxide‐, and sulfide‐based solid‐state electrolytes (SSEs) have been extensively investigated. However, the disadvantages of these SSEs, such as high‐temperature sintering of oxides, air instability of sulfides, and narrow electrochemical windows of polymers electrolytes, significantly hinder their practical application. Therefore, developing SSEs that have a high ionic conductivity (>10^?3 S cm^?1), good air stability, wide electrochemical window, excellent electrode interface stability, low‐cost mass production is required. Herein we report a halide Li⁺ superionic conductor, Li₃InCl₆, that can be synthesized in water. Most importantly, the as‐synthesized Li₃InCl₆ shows a high ionic conductivity of 2.04×10^?3 S cm^?1 at 25 °C. Furthermore, the ionic conductivity can be recovered after dissolution in water. Combined with a LiNi_0.8Co_0.1Mn_0.1O₂ cathode, the solid‐state Li battery shows good cycling stability.     

Boosting Solid‐State Diffusivity and Conductivity in Lithium Superionic Argyrodites by Halide Substitution

Developing high‐performance all‐solid‐state batteries is contingent on finding solid electrolyte materials with high ionic conductivity and ductility. Here we report new halide‐rich solid solution phases in the argyrodite Li₆PS₅Cl family, Li_6?xPS_5?xCl_1+x, and combine electrochemical impedance spectroscopy, neutron diffraction, and ⁷Li NMR MAS and PFG spectroscopy to show that increasing the Cl^?/S^2? ratio has a systematic, and remarkable impact on Li‐ion diffusivity in the lattice. The phase at the limit of the solid solution regime, Li_5.5PS_4.5Cl_1.5, exhibits a cold‐pressed conductivity of 9.4±0.1 mS cm^?1 at 298 K (and 12.0±0.2 mS cm^?1 on sintering)—almost four‐fold greater than Li₆PS₅Cl under identical processing conditions and comparable to metastable superionic Li₇P₃S₁₁. Weakened interactions between the mobile Li‐ions and surrounding framework anions incurred by substitution of divalent S^2? for monovalent Cl^? play a major role in enhancing Li⁺‐ion diffusivity, along with increased site disorder and a higher lithium vacancy population.