Microwave-assisted separation of ionic liquids from aqueous solution of ionic liquids

Microwave-assisted separation has been applied to recover ionic liquid (IL) from its aqueous solution as an efficient method with respect to time and energy compared to the conventional vacuum distillation. Hydrophilic ILs such as 1-butyl-3-methylimidazolium tetrafluoroborate ([Bmim][BF(4)]), 1-butyl-3-methylimidazolium trifluoromethanesulfonate ([Bmim][TfO]) and 1-ethyl-3-methylimidazolium methylsulfate ([Emim][MS]) could be recovered in 6 min from the mixture of ILs and water (1:1, w/w) under microwave irradiation at constant power of 10 W while it took at least 240 min to obtain ILs containing same water content (less than 0.5 wt%) by conventional vacuum oven at 363.15 K with 90 kPa of vacuum pressure. Energy consumptions per gram of evaporated water from the homogeneous mixture of hydrophilic ILs and water (1:1, w/w) by microwave-assisted separation were at least 52 times more efficient than those in conventional vacuum oven. It demonstrated that microwave-assisted separation could be used for complete recovery of ILs in sense of time and energy as well as relevant purity.     

Green solvents from ionic liquids and deep eutectic solvents to natural deep eutectic solvents

Natural deep eutectic solvents (NADESs) are defined as mixtures of certain molar ratios of natural compounds such as sugars, organic acids, amino acids, and organic bases that are abundant in organisms. The melting points of these mixtures are considerably lower than those of their individual ingredients and far below ambient temperature. The first publications on the NADES concept in 2011 created a great expectation regarding their potential as green solvents that could replace conventional organic solvents in a wide range of applications. This was largely because many of the drawbacks of conventional synthetic ionic liquids (ILs) and deep eutectic solvents (DESs), particularly their toxicity and environmental hazards, could be solved using NADESs. Throughout the last 7 years, the interest in NADESs has increased enormously as reflected by the exponential growth of the number of related publications. The research on NADESs has rapidly expanded particularly into the evaluation of the feasibility of their application in diverse fields such as the extraction of (targeted) bioactive compounds from natural sources, as media for enzymatic or chemical reactions, preservatives of labile compounds, or as vehicles of non–water-soluble compounds for pharmaceutical purposes. Along with the exploration of these potential applications, there have been a large number of other studies related to their physicochemical features, the search for new NADESs, the research into the interactions between NADES components or with solutes, the recovery of solutes from NADES solutions, and the ways of circumventing inherent problems of NADESs such as their high viscosity and the consequent difficulties in handling them. This article contains a review of the applications of NADESs as extraction solvents, reaction media, and preservative, providing also a perspective of their future.     

Green chemical functionalization of single-walled carbon nanotubes in ionic liquids

Single walled carbon nanotubes (SWNTs) are exfoliated and functionalized predominantly as individuals by grinding them for minutes at room temperature with aryldiazonium salts in the presence of ionic liquids (ILs) and K(2)CO(3). This constitutes an extremely rapid and mild green chemical functionalization process for obtaining the individualized nanotube structures. A number of ILs and various reaction conditions were surveyed. Raman, XPS, UV/vis/NIR spectroscopies, thermogravimetric analysis, and atomic force and transmission electron microscopies were used to characterize the products.     

Green synthesis of three- to five-membered O-heterocycles using ionic liquids

The investigation for replacement of organic solvents in organic synthesis is a growing area of interest due to increasing environmental issues. The use of ionic liquid salts as solvents and catalysts in organic reactions has gained extensive interest. Ionic liquids provided a new environmentally benign and improved alternative to traditional methods in modern synthetic chemistry. The aim of present review is to focus on the applications of ionic liquids for the synthesis of O-heterocycles.     

Inorganic materials from ionic liquids

Ionic liquids (ILs) can add value to many chemical processes. The electrochemistry and the (physical) organic chemistry communities in particular have extensively studied the structure, properties, and reactivities of various ILs and reactions therein. Inorganic and materials chemists are the newest addition to the IL community: over a number of years, various approaches to the fabrication of inorganic solids with unprecedented and sometimes unique structures and properties have been reported. This article summarizes the state of this particular sub-field of IL research and highlights a few promising approaches that not only reproduce conventional synthesis in ILs, but that provide pathways towards new, possibly unknown, inorganics with advantageous properties that cannot (or only with great difficulty) be made via conventional processes.     

Use of ionic liquids in the synthesis of nanocrystals and nanorods of semiconducting metal chalcogenides

We have synthesized nanoparticles of hexagonal CdS in the diameter range 3-13 nm by the reaction of cadmium acetate dihydrate with thioacetamide in imidazolium [BMIM]-based ionic liquids. We have obtained three different particle sizes of CdS by changing the anion of the ionic liquid. Addition of trioctylphosphine oxide (TOPO) to the reaction mixture causes greater monodispersity as well as smaller particle size, while addition of ethylenediamine produces nanorods of 7 nm average diameter. Hexagonal ZnS and cubic PbS nanoparticles with average diameters of 3 and 10 nm, respectively, have been prepared by the reaction of the metal acetates with thioacetamide in [BMIM][BF4]. Hexagonal CdSe nanoparticles with an average diameter 12 nm were obtained by the reaction of cadmium acetate dihydrate with dimethylselenourea in [BMIM][BF4]. In this case also we observe the same effect of the addition of TOPO as in the case of CdS. Addition of ethylenediamine to the reaction mixture gives rise to nanorods. ZnSe nanowires with a cubic structures, possible diameters in the range 70-100 nm by the reaction of zinc acetate dihydrate with dimethylselenourea in [BMIM][MeSO4]. The nanostructures obtained are single crystalline in all the cases. Most of the nanostructures show characteristic UV/Vis absorption and photoluminescence emission spectra. The thermodynamically most stable structures are generally produced in the synthesis carried out in ionic liquids.     

The influence of ionic liquids on the fabrication of nonenzymatic glucose electrochemical sensor

Gold nanoparticles (GNPs) embedded in a Bucky gel consisting of carbon nanotubes (CNTs) and ionic liquid (IL) show an excellent electrocatalytic activity to glucose oxidation owing to some synergistic effects among GNPs, CNTs and IL. Each component in such a composite has its specific function while there are complicate interactions among them. Based on this strategy, the use of composite as the modified coating allows the fabrication of a novel nonenzymatic glucose electrochemical sensor, which shows a substantial enhancement in detection sensitivity. This paper centers on the influence of several ILs with various anions and cations as well as alkyl branch lengths on the function of sensor. Based on our results, the performance of the sensor is strongly influenced by ILs. A few conclusions can be drawn. Firstly, an imidazolium cation facilitates both the stability of sensor and the efficiencies of GNPs and CNTs, while the alkyl branch lengths have few effects on the performance of sensor. Secondly, a hydrophilic anion is beneficial to the formation of environment where the direct oxidation of glucose takes place. Thirdly, other anions such as BF₄⁻ and PF₆⁻ do not matter for imidazolium-based IL. Fourthly, non-imidazolium-based IL militates against the dispersion of CNTs and GNPs in Bucky gel, reducing the detection sensitivity to glucose. Of the ILs studied, the best performance for glucose determination is obtained with an IL mainly benefitted by the combination of imidazole and sulfonate.     

Synthesis and ionic conductivity of polymer ionic liquids

Four vinyl monomers containing a covalently bonded cation ethylimidazolium and various anions—Br^?, (CF₃SO₂)₂N^?, (CN)₂N^?, and CF₃SO ₃ ^? —have been synthesized. High-molecular-mass polymers (M _w up to 1.84 × 10⁶) having the structure of ionic liquids have been prepared via the free-radical polymerization of 1-vinyl-3-ethylimidazolium in bulk and molecular and ionic solvents. The thermal stability and heat resistance of the resulting polymer salts have been estimated. It has been demonstrated that the thermal characteristics of these salts significantly depend on the nature of anions. The glass-transition temperatures of the polymers range from 19 to 235°C. The ionic conductivity of the polymer salts and their compositions with individual ionic liquids has been studied in the frequency range 50–10⁶ Hz. The highest conductivity (1.5 × 10^?5 S/cm) is exhibited by the polymer containing the (CN)₂N^? anion.     

Guanidinium-based ionic liquids

Cyclic (subset=N+<, subset = imidazolidine 3 and 4, hexahydro-pyrimidine 7 and 8, tetrahydro-1,3,5-oxadiazine 12, and triazoline 15 and 16) and acyclic [(R2N)2C=N+<, 19] guanidinium-based salts were synthesized via the quaternization of guanidine derivatives with nitric or perchloric acid or with iodomethane followed by metathesis reaction with silver nitrate, silver perchlorate, or ammonium dinitroamide. The structure of 15d was confirmed by single-crystal X-ray analysis. Most of the salts exhibited low melting points and good thermal stabilities. Their densities range between 1.2 and 1.5 g/cm3. Standard molar enthalpies of formation were calculated from experimentally determined constant-volume combustion energies obtained using an oxygen bomb calorimeter.     

Choline-derivative-based ionic liquids

A total of sixty-three choline derivative-based ionic liquids in the forms of chlorides, acesulfamates, and bis(trifluoromethylsulfonyl)imides have been prepared and their physical properties (density, viscosity, solubility, and thermal stability) have been determined. Thirteen of these salts are known chlorides: precursors to the 26 water-soluble acesulfamates, 12 acesulfamates only partially miscible with water, and 12 water-insoluble imides. The crystal structures for two of the chloride salts-(2-hydroxyethyl)dimethylundecyloxymethylammonium chloride and cyclododecyloxymethyl(2-hydroxyethyl)dimethylammonium chloride-were determined. The antimicrobial (cocci, rods, and fungi) activities of the new hydrophilic acesulfamate-based ILs were measured and 12 were found to be active. The alkoxymethyl(2-hydroxyethyl)dimethylammonium acesulfamates have been shown to be insect feeding deterrents and thus open up a new generation of synthetic deterrents based on ionic liquids. The alkoxymethyl(2-decanoyloxyethyl)dimethylammonium bis(trifluoromethylsulfonyl)imides have also been shown to act as fixatives for soft tissues and can furthermore be used as substitutes for formalin and also preservatives for blood.     

Methimazole-based ionic liquids

The alkylation reaction of 2-mercapto-1-methylimidazole 1a with iodoethane and chlorobutane produced S-alkylmethimazole halides 2a and 2b which were subjected to anion metathesis with two different metal salts (MA) to afford methimazole-based room-temperature ionic liquids 3a, 3b, and 3c in 82%, 85%, and 87% yields, respectively. S-Alkylation giving 2a and 2b suggests that methimazole reacts through the thione tautomer.     

Tetraalkylphosphonium-based ionic liquids

Ionic liquids are salts that are liquid at or near room temperature. Their wide liquid range, good thermal stability, and very low vapor pressure make them attractive for numerous applications. The general approach to creating ionic liquids is to employ a large, unreactive, low symmetry cation with and an anion that largely controls the physical and chemical properties. The most common cations used in ionic liquids are N-alkylpyridinium and N,N′-dialkylimidazolium. Another very effective cation for the creation of ionic liquids is tetraalkylphosphonium, [PR₁R₂R₃R₄]⁺. The alkyl groups, R_n, generally are large and not all the same. The halide salts of several phosphonium cations are available as starting materials for metathesis reactions used to prepare ionic liquids. The large phosphonium cations can combine with relatively large anions to make viscous but free flowing liquids with formula mass greater than 1000 g mol⁻¹. Some other more massive salts are waxes and glasses. The synthesis and the physical, chemical, and optical properties of phosphonium-ionic liquids having anions with a wide range of masses were measured and are reported here.     

Green fabrication of thermally-stable oxidized cellulose nanocrystals by evolved Fenton reaction and in-situ nanoreinforced thermoplastic starch

Cellulose - High performance fibers and improved interfacial interaction can enhance the properties of polymer composites. Herein, microcrystalline cellulose (MCC) was oxidized by H2O2/CuSO4, a new...     

Ready fabrication of thin-film electrodes from building nanocrystals for micro-supercapacitors

Thin-film pseudocapacitor electrodes with ultrafast lithium storage kinetics, high capacitance and excellent cycling stability were fabricated from monodispersed TiO(2) building nanocrystals, providing a novel approach towards next-generation micro-supercapacitor applications.     

Electrodeposition of monodispersed Fe nanocrystals from an ionic liquid

Monodispersed Fe nanocrystals up to approximately 2 nm thick, approximately 50 nm wide and approximately 120 nm long have been electrodeposited from the ionic melt AlCl(3)-1-methyl-3-butylimidazolium chloride [AlCl3-[MBIm](+)Cl(-)] at room temperature on Au(111) and have been characterized in-situ by electrochemical scanning tunneling microscopy.