Preorganization of diglycolamides on the calix[4]arene platform and its effect on the extraction of Am(III)/Eu(III)

Different diglycolamide (DGA)-substituted calix[4]arene-based extractants were synthesized and evaluated for the extraction of Am(III) and Eu(III), representative trivalent actinide and lanthanide ions, respectively. On the narrow rim of the calix[4]arene platform, the DGA moiety was either 1,3-di- or tetrasubstituted with a varying spacer length between the oxygen and amide nitrogen atom. In addition, DGA groups were appended both to the wide rim and to both rims of calix[4]arenes and their efficiencies were compared for Am(III) and Eu(III) extraction at three different feed acidities. The extraction and separation efficiencies strongly depended on the N-alkyl substituent as well as the spacer length. 1,3-Di-DGA-substituted calix[4]arenes are inferior extractants to the corresponding tetra-DGA-substituted ones. Narrow rim DGA-functionalized derivatives resulted in high extraction efficiencies, while the wide rim DGA-functionalized calix[4]arenes showed practically no extraction.     

Complexation and Separation of Amines, Amino Acids, and Peptides by Functionalized Calix[n]arenes

The ability of calix[n]arenes to form complexes, to act as extractants in liquid–liquid extraction, and run as carriers in transport through liquid membranes of different biological amine compounds (e.g., ammonium ion, amines, amino acids, and peptides) has been the central topics of many reports. These features recommend the calix[n]arenes as competitive candidates for studying the interactions involved in host–guest recognition as well as useful receptors in separation processes. Some specific aspects of their applications in binding and separation of various amine compounds by extraction, and in transport through liquid membranes have therefore been considered. The effect of the factors that might influence the separation of above compounds by extraction, and the transport through liquid membranes using the calix [n]arenes has been presented.     

Complexation and Separation of Amines,Amino Acids,and Peptides by Functionalized Calix[<Emphasis Type="Italic">n</Emphasis>]arenes

The ability of calix[n]arenes to form complexes, to act as extractants in liquid–liquid extraction, and run as carriers in transport through liquid membranes of different biological amine compounds (e.g., ammonium ion, amines, amino acids, and peptides) has been the central topics of many reports. These features recommend the calix[n]arenes as competitive candidates for studying the interactions involved in host–guest recognition as well as useful receptors in separation processes. Some specific aspects of their applications in binding and separation of various amine compounds by extraction, and in transport through liquid membranes have therefore been considered. The effect of the factors that might influence the separation of above compounds by extraction, and the transport through liquid membranes using the calix [n]arenes has been presented.This revised version was published online in July 2005 with a corrected issue number.     

Synthesis of New Calix[4]arenes Functionalizated by Acetylhydrazide Groups

A series of new calix[4]phenols, calix[4]resorcinols and calix[4]pyrogallols with acetylhydrazide substitutes has been␣synthesized with high yields by hydrazinolysis of ester group containing calix[4]arenes. The synthesized calix[4]phenols adopt the cone conformation while the calix[4]resorcinol and calix[4]pyrogallol derivatives prefer the boat conformation. The amide fragment of the hydrazide groups predominantly exists in the trans-conformation. The binding ability of synthesized calix[4]arenes toward transition and alkali metals by solvent extraction has been investigated.     

Physicochemical Characterization of Hydrated 4-Sulphonato-Calix[n]arenes: Thermal,Structural, and Sorption Properties

In this study, the thermal behavior of three hydrated water-soluble 4-sulphonato calix[n]arenes was investigated. The melting points, heats of fusion, and heats of solution of the calix[4]arene, calix[6]arene and calix[8]arene were 277, 262, and 270°C; 192, 242 and 351 kJ/mol; and 30, 58 and 63 kJ/mol, respectively. Lower heat of fusion, smaller increase in entropy and smaller heat of solution of the calix[4]arene compared to the calix[6]arene and calix[8]arene showed that less heat was required to break up the crystal lattice of the smaller macromolecule. This apparent anomaly is rationalized in terms of smaller cooperativity of interaction between the molecules of calix[4]arene in the crystal lattice, although the strength of the individual interactions is stronger as evidenced by the higher melting point. TGA analysis indicated that about 17–20% of water was associated with the calix[n]arenes. Both TGA and hot stage microscopy results indicated that upon heating these molecules underwent stepwise water loss. TGA kinetics showed that the 4-sulphonato-calix[8]arene lost water easier than the other two calixarenes. The moisture adsorption behavior of all calixarenes followed type II isotherms. For the same amount of material, the calix[6]arene adsorbed more moisture than the calix[4]arene and the calix[8]arene. Moreover, dehydrated less crystalline 4-sulphonic-calix[n]arenes powders are hydroscopic.

     

富勒烯的杯芳烃包合物的研究现状与展望

介绍了[60/70]富勒烯与杯[8],[6],[5]芳烃、高氧杂杯[3]芳烃及双杯芳烃形成包合物的研究进展和应用前景。     

A paradigm shift in the construction of heterobimetallic complexes: synthesis of group 2 & 4 metal-calix[6]arene complexes

Deprotonation of calix[6]arenes with barium in methanol followed by the addition of [Ti(OPr(i))(4)] or [Zr(OBu(n))(4)] is effective in the formation of novel dimeric 2:1 barium-titanium(IV)/zirconium(IV) calix[6]arene complexes. In these complexes a central Ti(IV)/Zr(IV) coordinated in the exo-position connects the two calix[6]arenes in the 1,3-alternate conformation, each with an endo-barium sharing common phenolate groups with the titanium/zirconium centre and participating in cation-pi interactions. A homometallic barium calix[6]arene dimer was also prepared wherein the calix[6]arenes are in the 1,3-alternate conformation with each coordinating one endo- and one exo-barium centre. The exo-barium cations connect the two calix[6]arenes through bridging methanol ligands. In this and the heterometallic complexes, cation-pi complexation of the Ba(2+) ion within the 1,3 alternate conformation of calix[6]arene facilitates the formation of the dimeric complexes in methanol. In contrast, the smaller Sr(2+) ion did not form similar complexes in methanol, and the formation of an analogous 2:1 strontium-titanium calixarene complex required the use of the more sterically demanding donor alcohol, isopropanol, the resulting complex being devoid of cation-pi interaction. The results show (i) that a subtle interplay of solvation strength, coordination array type and cavity/cation size influences the accessibility of heterobimetallic complexes based on calix[6]arenes, and (ii) a synergistic endo-exo binding behaviour.     

Calix[4]arenes bearing α‐amino‐ or α‐hydroxyphosphonic acid fragments at the upper rim

By the reaction of para‐formylcalix[4]arenes 1–6 with trialkyl phosphites in the presence of dry hydrogen chloride, calix[4]arenes 7–13 possessing dialkylphosphoryl‐hydroxymethyl groupings at the upper rim were synthesized. Calix[4]arenes 18–23 functionalized with dialkylphosphoryl‐alkyl(aryl)aminomethyl groups were obtained by sodium‐promoted addition of dialkyl phosphites to C=N bonds of para‐iminocalix[4]arenes 14–17 . The consecutive treatment of α‐hydroxy‐ or α‐aminophosphonic acid dialkyl esters of calix[4]arenes 7, 10, 18 , and 21 with bromotrimethylsilane and methanol gave dihydroxyphosphoryl derivatives of calix[4]arenes 24–27 . It was shown that calix[4]arenes bearing at the macrocyclic upper rim hydroxymethylphosphonic fragments, as well as bis‐hydroxymethyl(aminomethyl)phosphonic fragments, are able to undergo self‐assembly with formation of dimeric OH···O=P hydrogen bonded associates. © 2001 John Wiley & Sons, Inc. Heteroatom Chem 12:58–67, 2001     

para‐Sulfonated Calixarenes Used as Synthetic Receptors for Complexing Photolabile Cholinergic Ligand

The water‐soluble tetra‐, hexa‐ and octasulfonated calix[4]arenes, calix[6]arenes, and calix[8]arenes 1 – 3 , respectively, were investigated as potential synthetic receptors for photolabile cholinergic ligand A , a photolytic precursor of choline. Ligand A is a bifunctional molecule carrying a photolabile 2‐nitrobenzyl group at one end and a choline moiety at the other end. Results from NMR studies have shown that calixarenes 1 – 3 form stable 1 : 1 complexes with A , having similar binding potential to that observed with the cholinergic enzymes acetylcholinesterase and butyrylcholinesterase. Further studies have suggested that calix[8]arene forms a ditopic complex by binding concomitantly to both the cationic choline moiety and the aromatic photolabile group of A , whereas calix[4]arene and calix[6]arene form monotopic complexes with A . The ditopic complex between calix[8]arene and A results from mutually induced fitting process, while the monotopic complexes between calix[4]arene and A can be regulated by pH: at neutral pH, calix[4]arene specifically binds the cationic choline moiety, while, at acidic pH, it complexes unselectively both the cationic choline moiety and the aromatic group of A . Our results show that para‐sulfonated calixarenes are versatile artificial receptors which bind in various ways to the bifunctional photolabile cholinergic ligand A , depending on their size, geometry, and state of protonation.     

杯芳烃衍生物液－液萃取和液膜传输银的对比研究及机理探讨

以4类含硫、硒、氮等杂原子基团二取代的杯[4]芳烃五衍生物（1－14）为中 性载体，在H2O-CHCl3-苦味酸体系萃取银和H2O-CHCl3-H2O液膜体系中传输银进行 了对比研究。萃取和传输结果具有一致性，除了苯并噻唑取代的杯[4]芳烃衍生物 （3－6）外，其它10个含硫、硒、氮的杯[4]芳烃衍生物1－14均对软重金属银和汞 有很高的选择性，而吡啶取代的杯[4]芳烃衍生物7－10对铅有一定的萃取选择性， 其中羟基硫醚取代的杯[4]芳烃衍生物11－14对银的萃取率和传输速率最大。并且 就杯[4]芳烃衍生物对银的传输机理进行了探讨，发现传输速率随源相中金属离子 浓度和有机相中载体浓度的增加而增大，因此推论这是由金属离子浓度梯度推动下 的传输。     

Conformationally Selective Synthesis of Mononitrocalix[4]arene in Cone or Partial Cone

Nitro‐substituted calixarenes in a cone and a partial cone conformation were prepared selectively using distinct synthetic routes. The selective nitration of tris‐ or penta‐substituted phenols of calix[4]arene or calix[6]arene provided mononitrocalix[n ]arenes (n  =  4, 6). Subsequent addition of ethylene glycol (EG) moieties to mononitrocalix[4]arene provided tetraEGylcalix[4]arene in locked partial cone conformation. By an alternative route – initial addition of EG moieties to the non‐derivatized calix[4]arene followed by the uncontrolled nitration – provided mononitro‐ and dinitro‐tetraEGylcalix[4]arenes locked in the cone conformation. These nitrocalix[4]arenes with locked cone or partial cone conformation are useful building blocks for further assembly of supramolecular systems, especially in the area of material sciences.     

Microwave-assisted synthesis of 1,3-dialkyl ethers of calix[4]arenes: application to the synthesis of cesium selective calix[4]crown-6 ionophores

Partial etherification of phenolic-OH groups of calix[4]arenes with various alkyl halides/tosylates and K₂CO₃ under microwave irradiation afforded 1,3-dialkoxycalix[4]arenes in their cone conformation only as predominant/sole product in good yields (71–85%). The protocol was found to be much superior to conventional heating both in terms of yield and reaction time. Some of the 1,3-dialkoxycalix[4]arenes were elaborated further to the syntheses of cesium selective calix[4]crown-6 ionophores.     

上端含长链烷基的手性杯[4]芳烃合成

脱叔丁基的杯[4]芳烃与长链的叔醇或者叔氯代烷烃进行傅-克反应, 在其上端引入长链烷基. 然后在下端引入光学活性的1-苯基乙胺基团, 得到了一系列上端含长链烷基的手性杯[4]芳烃.     

Synthesis of （p-Formylphenyl）azo Calix[4]arenes

Five novel azo calix[4]arenes were reported. The p-aminobenzaldehyde was diazotized with sodium nitrite in aqueous hydrochloride solution. Mono-, bis-, tris- and tetrakis(p-formylphenyl)azo calix[4]arenes (including proximal and distal isomers) were obtained respectively by diazo-coupling in different molar ratio to calix[4]arene(1) under pH=7.5--8.5 at 0-5℃. All (p-formylphenyl)azo calix[4]arenes were characterized by ^1H NMR, ^13C NMR, IR, MS (ESIMS) spectroscopies and elemental analysis.     

Stereochemical control of calixarenes useful as rigid and conformationally diversiform platforms for molecular design

Stereochemical problems and related functions of calix[4]arenes, calix[6]arenes and their chiral derivatives have been reviewed. In p-tert-butylcalix[4]arene (1H₄) and its mono-, di-, tri-, and tetra-O-alkyl derivatives (1H₃R, 1H₂R₂,1HR₃, and 1R₄, respectively), 23 different homologues can exist (including 1H₄). We found that the OH group in the unmodified phenol unit is permeable through the calix[4]arene ring. Thus, several conformational isomers become equivalent after the ‘oxygen-through-the-annulus’ rotation of the OH group and the number of possible homologues is reduced to 13 (including 1H₃). We report in this paper the syntheses of all of these possible conformational isomers using a protection-deprotection method with a benzyl group and metal template effects. On the other hand, all possible chiral isomers that can be derived from calix[4]arene by modification of the OH groups have been systematically classified. Molecular asymmetry can be generated not only by different substituents but also by conformational isomerism. The numbers of chiral isomers are 17 for tetra-O-substituted calix[4]arenes, 9 for tri-O-substituted calix[4]arenes, 3 for di-O-substituted calix[4]arenes, and 0 for mono-O-substituted calix[4]arenes. Chiral calix[4]arenes can also be designed by the introduction of a substituent into the m-position of a phenol unit or by the use of a dissymmetric ‘stapling reaction’ in proximal phenol units. In p-tert-butylcalix[6]arene, the conformational behaviour is totally different from that in p-tert-butylcalix[4]arene. A large degree of conformational freedom remains in the framework, and both ‘oxygen-through-the-annulus rotation’ and ‘para-substituent-through-the-annulus rotation’ can take place. However, when metal cations are bound to calix[6]aryl esters, the conformation is changed to a cone type. Bridging and capping are powerful methods to immobilize the conformation of calix[6]arenes. In addition, definitive evidence for ring immobilization was obtained from the absence of racemization in the chiral calix[6]arene. A successful example of chiral recognition for α-amino acid derivatives was achieved by using chiral homooxacalix[3]arene which has ‘pseudo C₂ symmetry’. These examples indicate that calixarenes serve as rigid and conformationally diversiform platforms for the design of novel functional supramolecules.     

Synthesis and metal ion complexation studies of proton-ionizable calix

A series of novel N-chromogenic calix[4]arene azacrown ethers were synthesized as selective extractants of potassium ion. 1,3-Alternate calix[4]arene azacrown ethers were prepared by reacting 25,27-dipropyloxy-26,28-bis(5-chloro-3-oxapentyloxy) calix[4]arenes with p-toluenesulfonamide in the presence of potassium carbonate. The coupling reaction of calix[4]arene azacrown ether with 2-hydroxy-5-nitrobenzyl bromide in the presence of triethylamine in THF gave the chromogenic calix[4]arene azacrown ether in moderate yield. These compounds show high potassium selectivity over other metal ions as shown by two-phase extraction, bulk liquid membrane, and 1H NMR studies on a ligand-metal complex. It is assumed that the OH of the chromogenic group attached on nitrogen can assist the complexation by encapsulation of the metal.     

Synthesis of fully lower‐rim,carbonate‐bridged calix[8]arenes and their curing behavior

Novel fully lower‐rim, carbonate‐bridged calix[8]arene derivatives were successfully synthesized in high yield by the condensation of p‐alkyl substituted calix[8]arenes with triphosgene. Different bases and catalysts were used for the preparation depending on the p‐alkyl substituted groups of the calix[8]arenes. The conformational features of the derivatives were examined by ¹H NMR analysis. Thermosetting formulations were prepared from a mixture of bisphenol A polycarbonate with calix[8]arene carbonate derivatives using sodium benzoate as a catalyst. Their crosslinking behaviors were studied using differential thermal/thermogravimetric analysis. No glass‐transition temperatures were observed after annealing at 280–300 °C. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1149–1155, 2001     

Palladium(II) extraction by sulfur-containing calix[4,6]arenes from hydrochloric acid solutions

The comparison of the extraction properties of calixarenes, thiacalixarenes, and calix[4,6]arene thioethers showed that methyl(thiamethyl)calix[4,6]arenes 3a and 4a have the highest extraction abilities. These extractants rapidly and completely extract palladium from hydrochloric acid solutions; regarding distribution factors achieved in the kinetic mode, they three to four orders of magnitude exceed their monodentate analogue, octylbenzyl sulfide (OBnS). Approaches are considered to enhance palladium extraction via generating mixed palladium species in low-acidity solutions and via intramolecular catalysis by the protonated oxygen atoms of alkoxy groups in the lower rim. For 1 M HCl, the kinetic order of diluent effects on palladium extraction was established. The substitution of sulfur atoms for bridging CH₂ groups was discovered to enhance palladium extraction by calix[4]arene thioether 3c.     

Synthesis of （p—Substituted phenyl）azo Calix[4] arenes

A novel method for the preparation of chromogenic calixarenes with azo groups was reported.p-Substituted(-NO2,-CH3,-Cl)amilines were diazotized with isoamyl nitrite in EtONa/EtOH under refluxing condition.Fifteen mono-,bis-,tris-and tetrakis(p-substituted phenyl)azo calix[4]arenes (including proximal and distal isomers) were obtainged respectively by diazo-coupling in different molar ratio to calix[4]arenes(1) under pH=7.5-9.0 in non-aqueous solution at 0-5℃.^1H NMR and ^13C NMR spectra of (p-substtituted phenyl)azo calix[4]-arenes indicated that they existed in cone conformation in solution.     

A study of hydrogen bonds in <Emphasis Type="Italic">p</Emphasis>-substituted calix[4]-and calix[6]arenes by <Emphasis Type="Italic">ab initio</Emphasis> and electron density functional methods

RHF/3-21G and B3LYP/3-21G methods are used to calculate the hydrogen bond energies in calix[4]-, calix[6]-, p-fluorocalix[4]-, p-fluorocalix[6]-, p-chlorocalix[4]-, p-chlorocalix[6]-, p-bromocalix[4]-, pbromocalix[6]-, p-iodocalix[4]-, p-iodocalix[6]-arenes and a number of other p-substituted calix[4]- and calix[6]arenes (R = Me, OMe, NO₂, Ac, NH₂, CN, N₂⁺). The calculations along with the structural data give evidence of the cooperative effect of hydrogen bonding. Multiple correlation (p ≥ 0.9) between the pairs of Hammett substituent constants and the calculated values of hydrogen bond energies in the corresponding p-substituted calixarenes is found. It is predicted that in the presence of weak bases and in aprotic solvents as well as in the gas phase, the nucleophilic substitution reaction involving p-halogen calix[6]arenes should proceed through diastereomeric transition states.