Development of ion-conducting polymer electrolytes for use in high-energy lithium rechargeable batteries

Polymers based on poly(thylene oxide) (PEO) are a very promising new type of stable electrolytes for lithium rechargeable batteries. Their relatively low ionic conductivities can be more than compensated by the very small electrolyte thicknesses that can be used. Specific energies of 100 Wh/kg at sustained specific powers of 70 W/kg, have been obtained at Hydro-Québec with 100 μm of PEO electrolyte at 100°C. In an electric vehicle, this would give a driving range of over 300 km at 80 km/h, more than three times as much as lead-acid batteries. PEO-related polymers have been developed for lower temperature applications such as computers or portable appliances. Advantages over competitive Ni-Cd batteries are higher energy densities and absence of self-discharge, with expected shell lifes of 10 years. Laboratory prototypes (3600 cm², 10 Wh) demonstrate the absence of scale-up effects and excellent cycling capability (over 300 charge-discharge cycles).     

Block copolymer electrolytes for rechargeable lithium batteries

Ion‐conducting block copolymers (BCPs) have attracted significant interest as conducting materials in solid‐state lithium batteries. BCP self‐assembly offers promise for designing ordered materials with nanoscale domains. Such nanostructures provide a facile method for introducing sufficient mechanical stability into polymer electrolyte membranes, while maintaining the ionic conductivity at levels similar to corresponding solvent‐free homopolymer electrolytes. This ability to simultaneously control conductivity and mechanical integrity provides opportunities for the fabrication of sturdy, yet easily processable, solid‐state lithium batteries. In this review, we first introduce several fundamental studies of ion conduction in homopolymers for the understanding of ion transport in the conducting domain of BCP systems. Then, we summarize recent experimental studies of BCP electrolytes with respect to the effects of salt‐doping and morphology on ionic conductivity. Finally, we present some remaining challenges for BCP electrolytes and highlight several important areas for future research. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1–16     

All solid polymer electrolytes based on polar side group rotation for rechargeable lithium batteries

A novel polymer matrix with a polar carbonyl group was designed and used to prepare an all‐solid polymer electrolyte in lithium rechargeable batteries. The ionic conductivity of this type of polymer electrolyte was examined. The relationship between the lithium salt concentration and ionic conductivity was investigated by Fourier transform infrared (FTIR) spectroscopy. The carbonyl groups in the polymer matrix effectively interacted with the lithium salt, which improved the ionic conductivity at a large range of temperatures. The ionic conductivity of this type of polymer electrolyte was approximately 10^?4 S cm^?1 at room temperature. The stability of the interface between electrode and electrolyte was evaluated by measuring the alternating current (AC) impedance. Copyright © 2009 John Wiley & Sons, Ltd.     

Development of sulfide glass-ceramic electrolytes for all-solid-state lithium rechargeable batteries

Development of Li₂S–P₂S₅-based glass-ceramic electrolytes is reviewed. Superionic crystals of Li₇P₃S₁₁ and Li_3.25P_0.95S₄ were precipitated from the Li₂S–P₂S₅ glasses at the selected compositions. These high temperature or metastable phases enhanced conductivity of glass ceramics up to over 10⁻³ S cm⁻¹ at room temperature. The original (or mother) glass electrolytes itself showed somewhat lower conductivity of 10⁻⁴ S cm⁻¹ and have important role as a precursor for obtaining the superionic crystals, which were not synthesized by a conventional solid-state reaction. The substitution of P₂O₅ for P₂S₅ at the composition 70Li₂S·30P₂S₅ (mol%) improved both conductivity and electrochemical stability of glass-ceramic electrolytes. The all-solid-state In/LiCoO₂ cell using the 70Li₂S·27P₂S₅·3P₂O₅ (mol%) glass-ceramic electrolyte showed initial capacity of 105 mAh g⁻¹ (gram of LiCoO₂) at the current density of 0.13 mA cm⁻² and exhibited higher electrochemical performance than that using the 70Li₂S·30P₂S₅ glass-ceramic electrolyte.     

Designing composite polymer electrolytes for all-solid-state lithium batteries

Ceramic fast-ion conductors have high ionic conductivities (>10^?4 S cm^?1) but are difficult to process and have poor chemo/mechanical properties at the electrode/electrolyte interfaces. In contrast, polymer electrolytes are pliable and easy to process but suffer from low room-temperature ionic conductivities (≈10^?6-10^?7 S cm^?1). Combining these two elements to form a composite polymer electrolyte is a promising way to enable all-solid-state lithium-metal batteries. The choice of ceramic filler and polymer can be tailored to provide synergistic benefits that overcome the practical shortcomings of the two components. Herein, the fundamentals of Li⁺ conduction through the various phases and interfaces in these materials are discussed as well as the important parameters, beyond the initial choice of polymer and ceramic filler materials that must be considered while designing composite polymer electrolytes. Emphasis is placed on the particle filler engineering and practical fabrication methods as routes toward enhancing the properties of these composites.     

Review on gel polymer electrolytes for lithium batteries

This paper reviews the state-of-art of polymer electrolytes in view of their electrochemical and physical properties for the applications in lithium batteries. This review mainly encompasses on five polymer hosts namely poly(ethylene oxide) (PEO), poly(acrylonitrile) (PAN), poly(methyl methacrylate) (PMMA), poly(vinylidene fluoride) (PVdF) and poly(vinylidene fluoride-hexafluoro propylene) (PVdF-HFP) as electrolytes. Also the ionic conductivity, morphology, porosity and cycling behavior of PVdF-HFP membranes prepared by phase inversion technique with different non-solvents have been presented. The cycling behavior of LiMn₂O₄/polymer electrolyte (PE)/Li cells is also described.     

Nanomaterials for rechargeable lithium batteries

Energy storage is more important today than at any time in human history. Future generations of rechargeable lithium batteries are required to power portable electronic devices (cellphones, laptop computers etc.), store electricity from renewable sources, and as a vital component in new hybrid electric vehicles. To achieve the increase in energy and power density essential to meet the future challenges of energy storage, new materials chemistry, and especially new nanomaterials chemistry, is essential. We must find ways of synthesizing new nanomaterials with new properties or combinations of properties, for use as electrodes and electrolytes in lithium batteries. Herein we review some of the recent scientific advances in nanomaterials, and especially in nanostructured materials, for rechargeable lithium-ion batteries.     

Compositional effect of PVdF-PEMA blend gel polymer electrolytes for lithium polymer batteries

Owing to their improved mechanical properties and good polymer miscibility, the blend gel polymer electrolytes of poly (vinylidene fluoride) (PVdF)-poly(ethyl methacrylate) (PEMA) have been prepared using solvent casting technique and characterized for their electrochemical performances. The electrolyte shows a maximum ionic conductivity of 1.5 × 10⁻⁴ S cm⁻¹ at 301 K for the 90:10 blend ratio of PVdF:PEMA system with good transport property. The ionic conductivity is enhanced, in accompany with improved microstructural homogeneity, at low PEMA contents, while the decreased conductivity at high contents has been attributed to increasing crystalline PEMA domains. With the optimum PVdF:PEMA ratio, the complex system was found to facile reasonable ionic transference number and exhibit superior interfacial stability with Li electrode.     

Soft matter lithium salt electrolytes: ion conduction and application to rechargeable batteries

Abstract  

Soft matter provides diverse opportunities for the development of electrolytes for all solid state lithium batteries. Here we review soft matter solid electrolytes for lithium batteriesthat are primarily obtained starting from liquid electrolytic systems. This concept of solid electrolyte synthesis from liquid is significantly different from prevalent approaches. The novelty of our approach is discussed in the light of various fundamental issues and in relation to its application to rechargeable lithium batteries.     

Recent progress in NMR spectroscopy of polymer electrolytes for lithium batteries

Recent progress on the use of nuclear magnetic resonance (NMR) spectroscopy to investigate structure and dynamics of polymer electrolytes for advanced lithium batteries is reviewed in this article. The survey includes a list of both standard and relatively novel techniques, with many examples of their applications drawn from the literature.     

Soft matter lithium salt electrolytes: ion conduction and application to rechargeable batteries

Abstract  Soft matter provides diverse opportunities for the development of electrolytes for all solid state lithium batteries. Here we review soft matter solid electrolytes for lithium batteriesthat are primarily obtained starting from liquid electrolytic systems. This concept of solid electrolyte synthesis from liquid is significantly different from prevalent approaches. The novelty of our approach is discussed in the light of various fundamental issues and in relation to its application to rechargeable lithium batteries. Graphical abstract   M. Patel and S. K. Das have contributed equally to the work.     

Sol-gel electrolytes in lithium batteries

This paper presents the results of the thermodynamic calculations of material compatibility along with the results of the experimental studies using lithium aluminosilicate gel electrolyte in lithium batteries. Initially, there were problems with gel monoliths and porous cathodes in the Li solid electrolyte batteries. Better results were obtained through the direct application of thin films of the lithium aluminosilicate gels to the surfaces of dense, sintered oxide cathodes. It was important to maintain extremely low moisture and oxygen levels in the dry glove box during the assembly and testing of the battery, especially when it came to achieving good contact between the sol-gel electrolyte and the lithium metal. Suggestions are given about procedures for further development of the sol-gel electrolyte batteries.     

Synthesis and electrochemistry of polymer based electrolytes for lithium batteries

An overview is presented on the development of improved polymer based electrolytes during the past years. The emphasis lies on new approaches regarding chemical concepts that achieve a higher total conductivity and lithium transference number as well as an increased electrochemical, mechanical and thermal stability. With respect to the polymer chemistry, the focus is laid on siloxane and phosphazene derived systems. Topics are the chemical modification of the polymeric, cyclic and low molecular derivates of these systems, the formation of stable membranes from these by suitable cross-linking strategies and an extensive electrochemical characterization in corresponding lithium cells. Recent trends towards composite and hybrid materials are illustrated with examples and newly developed hybrid electrolytes. A particular chance for improvements comes from the design and use of stable small molecular additives in combination with optimized and electrochemically stable polymer networks. Special compounds are introduced which may act themselves as novel solvents with increased electrochemical stabilities. The relevance of chosen lithium salts for polymer electrolytes is discussed, too, and a new family of pyrazolide anions is introduced. In all cases, the electrochemical performance has been characterized by standard experimental techniques.     

Sulfone-based high-voltage electrolytes for high energy density rechargeable lithium batteries:Progress and perspective

Further enhancement in the energy density of rechargeable lithium batteries calls for high-voltage cathode materials and stable anodes,as well as matched high-voltage electrolytes without compromising the overall property of batteries.Sulfone-based electrolytes have aroused great interest in recent years owing to their wide electrochemical window and high safety.However,significant challenges such as the complexity of synthesis,high melting point(typically above room temperature),high viscosity,and their poor compatibility with graphite-based anodes have drastically impeded their practical applications.In this review,recent progress of sulfone solvents in high energy density rechargeable lithium batteries is summarized theoretically and experimentally.More importantly,general improvement methods of sulfone-based electrolytes,such as adding additives and cosolvents,structural modifications of sulfo ne,superconcentrated salt strategy are briefly discussed.We expect that this review provides inspiration for the future developments of sulfone-based high-voltage electrolytes(SHVEs) and their widespread applications in high specific energy lithium batteries.     

Intercalation materials for lithium rechargeable batteries

An overview is given of intercalation materials for both the negative and the positive electrodes of lithium batteries, including the results of our own research. As well as lithium metal as a negative electrode, we consider insertion materials based on aluminium alloys. In the case of the positive electrode metal-oxides based on manganese, nickel and cobalt are discussed. Received: 27 May 1997 / Accepted: 30 July 1997     

Internal in situ gel polymer electrolytes for high-performance quasi-solid-state lithium ion batteries

Journal of Solid State Electrochemistry - The performance of solid-state lithium ion battery mainly depends on the performance of the electrolyte and the interface between the electrolyte and the...     

Recent progress of composite solid polymer electrolytes for all-solid-state lithium metal batteries

In comparison with lithium-ion batteries (LIBs) with liquid electrolytes, all-solid-state lithium batteries (ASSLBs) have been considered as promising systems for future energy storage due to their safety and high energy density. As the pivotal component used in ASSLBs, composite solid polymer electrolytes (CSPEs), derived from the incorporation of inorganic fillers into solid polymer electrolytes (SPEs), exhibit higher ionic conductivity, better mechanical strength, and superior thermal/electrochemical stability compared to the single-component SPEs, which can significantly promote the electrochemical performance of ASSLBs. Herein, the recent advances of CSPEs applied in ASSLBs are presented. The effects of the category, morphology and concentration of inorganic fillers on the ionic conductivity, mechanical strength, electrochemical window, interfacial stability and possible Li⁺ transfer mechanism of CSPEs will be systematically discussed. Finally, the challenges and perspectives are proposed for the future development of high-performance CSPEs and ASSLBs.     

Dilithium bis[(perfluoroalkyl)sulfonyl]diimide salts as electrolytes for rechargeable lithium batteries

A series of four different dilithium salts of structure F₃CSO₂N(Li)SO₂-(CF₂)_x-SO₂N(Li)SO₂CF₃, with x = 2, 4, 6, 8 were synthesized and characterized in polyethylene-oxide-based solid polymer electrolytes. Each salt may be thought of as two bis[(perfluoroalkyl)sulfonyl]imide anions linked together by a perfluoroalkyl chain of a particular length. Taken together, this homologous series provides an opportunity to study the effects of linker chain length and degree of fluorination in dianionic (and ultimately polyanionic) salts on the properties, particularly the conductivity, of the salts in various solvating media. SPEs in polyethylene oxide were characterized using scanning calorimetry, X-ray diffraction, ¹H and ¹⁹F NMR, and electrochemical impedance spectroscopy for SPEs prepared using ethylene-oxide-oxygen-to-lithium (EO:Li) ratios of 10:1 and 30:1. Trends in SPE ionic conductivity with anion structure revealed an unexpected trend whereby ionic conductivity is generally rising with increased length of the perfluoroalkylene linking group in the dianions. This trend could be the result of a decrease in dianion basicity that results in diminished ion pairing and an enhancement in the number of charge carriers with increasing anion fluorine content, thereby increasing ionic conductivity.     

High safety separators for rechargeable lithium batteries

Lithium-ion batteries(LIBs) are presently dominant mobile power sources due to their high energy density, long lifespan, and low self-discharging rates. The safety of LIBs has been concerned all the time and become the main problem restricting the development of high energy density LIBs. As a significant part of LIBs, the properties of separators have a significant effect on the capacity and performances of batteries and play an important role in the safety of LIBs. In recent years, researchers devoted themselves to the development of various multi-functional safe separators from different views of methods, materials, and practical requirements. In this review, we mainly focus on the recent progress in the development of high-safety separators with high thermal stability, good lithium dendritic resistance, high mechanical strength and novel multifunction for high-safety LIBs and have in-depth discussions regarding the separator's significant contribution to enhance the safety and performances of the batteries. Furthermore, the future directions and challenges of separators for the next-generation high-safety and high energy density rechargeable lithium batteries are also provided.