基于自映像的光子晶体波导分束器的设计

通过研究2维正方晶格光子晶体波导多模干涉的自映像效应,优化设计了一种新型1×2光子晶体波导分束器,采用时域有限差分法对其传输特性进行模拟分析。设计过程中,根据多模干涉耦合区中周期出现的双重像的位置确定两个单模输出波导的位置,通过在分束器输入和输出耦合区的连结处设置介质柱,改变输入和输出耦合区中的模场分布,实现模式匹配,从而明显减小分束器的反射损耗。计算结果表明:设置的介质柱归一化半径分别为0.08和0.177时,对于波长为1.55μm的入射光,该分束器的透射率可高达93%。     

Investigation of self-imaging based on the field distribution in multimode photonic crystal waveguides

We have investigated the self-imaging phenomena based on the field distribution in two-dimensional multimode photonic crystal waveguides (PCWs) by the finite-difference time-domain (FDTD) method. The new self-imaging conditions are given for the mirrored images and the direct images. The self-imaging distributions in multimode PCWs can be explained by the new self-imaging conditions and the superposition of “sub-images”. The results of numerical simulation show a good agreement with the theoretical predictions.     

全内反射型三角晶格光子晶体多模波导中的光传播特性

研究了光波在没有光子带隙的三角晶格型光子晶体多模波导中的传播特性. 利用等效折射率法,将该结构等效为三层平板介质波导,基于自映像原理,数值分析和模拟了其多模干涉效应. 研究结果表明,由于全内反射和分布式布拉格反射的联合效应,光场类似于传统波导模式,能高效地传输;随着填充率的增大,高透射区域将向波长减小的方向移动,带宽和透射率也随之增加, 研究结果为实际应用中选择适当的填充率提供了理论依据. 关键词： 光子晶体多模波导 全内反射 填充率 时域有限差分法     

Ultracompact plasmonic racetrack resonators in metal-insulator-metal waveguides

Among various plasmonic waveguides, the metal-insulator-metal (MIM) type is the most promising for true subwavelength photonic integration. To date, many photonic devices based on MIM waveguides have been investigated, including resonators. However, most of the reported MIM ring resonators suffer from low extinction ratios and the reasons are unexplored in the literature. In this paper, we present a comprehensive analysis of the underlying causes of the low performance of MIM ring resonators, and give the analytical transmission relation for a universal all-pass ring resonator with coupling loss. Based on the analysis we propose plasmonic racetrack resonators in MIM waveguides and show that the performance can be greatly improved.     

Circular arc plasmonic waveguide couplers between two-dimensional dielectric slab waveguides and plasmonic waveguides

We investigate the properties of arc plasmonic waveguide coupler between two-dimensional dielectric slab waveguides and plasmonic waveguides with two-dimensional finite difference time domain methods. The simulation results show that transmission efficiency between high index dielectric slab waveguides with width 300 nm and silver-air-silver waveguides with width 40 nm connected by the coupler can reach to 90.4% at optical communication wavelength. And, by optimizing the shapes near the ends of the coupler, the transmission efficiency can be improved to 98.4%.     

A visible-near infrared tunable waveguide based on plasmonic gold nanoshell

A tunable plasmonic waveguide via gold nanoshells immerged in a silica base is proposed and simulated by using the finite difference time-domain （FDTD） method. For waveguides based on near-field coupling, transmission frequencies can be tuned in a wide region from 660 to 900 nm in wavelength by varying shell thicknesses. After exploring the steady distributions of electric fields in these waveguides, we find that their decay lengths are about 5.948-12.83 dB/1000 nm, which is superior to the decay length （8.947 dB/1000 nm） of a gold nanosphere plasmonic waveguide. These excellent tunability and transmittability are mainly due to the unique hollow structure. These gold nanoshell waveguides should be fabricated in laboratory.     

Asymmetric plasmonic-dielectric coupler with short coupling length, high extinction ratio, and low insertion loss

Asymmetric directional coupling between a hybrid plasmonic waveguide with subwavelength field confinement and a conventional dielectric waveguide is investigated. The proposed hybrid coupler features short coupling length, high coupling efficiency, high extinction ratio, and low insertion loss; it can also be integrated into a silicon-based platform. This coupler can be potentially adopted for signal routing between plasmonic waveguides and dielectric waveguides in photonic integrated circuits. Furthermore, it can be exploited to efficiently excite hybrid plasmonic modes with conventional dielectric modes.     

Talbot Effect in Three Waveguide Arrays

By taking the coupling between the non-neighbourhood waveguides into account, the coupling characteristic of three waveguide arrays is analysed. The strong coupling equation of three waveguides is dealt with Laplace transform and LU decomposition. The general field evolution equation is obtained by inversion of the Laplace transform. The results show that the self-imaging conditions （Talbot effect） do not satisfy in general. The theoretical predictions are in good agreement with the BPM simulations.     

Analysis of optical rib self-imaging multimode interference (MMI) waveguide devices using the discrete spectral index method

We have developed a semianalytical approach to study the propagation characteristics of multimode interference (MMI) waveguide structures. The effect of transverse crosssection geometry on self-imaging length and optical power throughput are investigated. We present results confirming that the nonquadratic modal dispersion encountered in stripe-loaded waveguides impairs self-imaging performance. Results indicate that the image degradation is more predominant for asymmetrically fed MMI waveguides.     

Surface plasmon polariton waveguides with subwavelength confinement

Surface plasmon polaritons(SPPs) are evanescent waves propagating along metal-dielectric interfaces, which provide an effective way to realize optical wave guiding with subwavelength confinement. Metallic nanostructures supporting SPPs,that is, plasmonic waveguides, are considered as required components to construct nanophotonic devices and circuits with a high degree of miniaturization and integration. In this paper, various types of plasmonic waveguides operating in the visible, infrared, and terahertz regions are reviewed, and the status of the research on their fundamentals, fabrications,and applications is provided as well. First, we discuss the mechanisms of SPPs beyond the diffraction limit, and their launching methods. Then, the characteristics of SPPs on various plasmonic waveguides are reviewed, including top-down and bottom-up fabricated types. Considering applications, certain prototypes of plasmonic devices and circuits constructed by plasmonic waveguides for bio/chemo sensing, router, and light modulation are demonstrated. Finally, a summary and future outlook of plasmonic waveguides are given.     

分数自成像平面波导的光束组束

研究了激光束在分数自成像平面波导中的传输特性,提出了利用分数自成像平面波导进行光束组束的技术方案,讨论了激光束之间相位失配对光束组束的影响,并对两个输出平均功率为300W的板条激光器的光束组束进行了数值实验模拟.结果表明,分数自成像平面波导的光束组束可以有效地改善多个激光器组束后的光束质量因子M²,从而提高激光输出的亮度;而且这种组束方法对激光束之间相位失配的敏感度明显降低. 关键词： 分数自成像 平面波导 组束 光束质量     

Self-imaging and modulational instability in an array of periodically curved waveguides

Linear and nonlinear light propagation in an array of waveguides with a periodically bent axis is theoretically investigated. In the linear propagation regime, it is shown that a self-imaging effect at periodic planes may occur, a phenomenon analogous to that of dynamic localization observed when an electron in a periodic potential is subjected to an ac field. In the nonlinear propagation regime, it is shown that periodic waveguide bending under the self-imaging condition inhibits the phenomenon of discrete modulational instability.     

Detailed investigation of self-imaging in multimode photonic crystal waveguides for applications in power and polarization beam splitters

Properties of the self-imaging effect based on multimode interference (MMI) in multimode photonic crystal waveguides (PCWs) are investigated and analyzed in detail. By combining photonic band gap (PBG) and total internal reflection (TIR) effects in PCWs, self-imaging phenomena are achieved for both TE and TM polarizations. To observe the images reproduced by this self-imaging phenomenon, finite-difference time-domain (FDTD) simulations are performed on a multi-mode PCW. From these numerical simulations the reproduced images are identified and their positions along the propagation axis are described. We also, present the design and simulation of novel polarization-insensitive power splitter and polarization splitter. The simulation results show that the optimized devices have excellent transmission efficiencies as well as wide operating frequency bandwidths and small structure size. So, the proposed devices are promising and may play an important role in high-density photonic integrated circuits in the future.     

Ultra compact hybrid plasmonic–photonic coupler: configuration of metal–silica–silicon

In this work, a novel and practical configuration as a hybrid plasmonic–photonic coupler based on silicon (Si) nanofibers, silica waveguides and metal nanoparticles is examined and investigated. All of utilized waveguides, fibers and nanoparticles are embedded in an \(\hbox {Mg}_{2}\hbox {F}\) crystal host. Integrated plasmonic–photonic coupler provides significant transmission efficiency during guiding and propagating of light. Utilizing enhanced plasmonic waveguides helps to reduce the inherent losses such as scattering into the far-field and absorption of optical power inside the employed components, especially in nanoparticles. The transmission loss component under transverse electric excitation (TE) for the superstructure has been calculated as approximately \(\gamma _{T}=3\,\hbox {dB}/675\)  nm. Also, we investigate the coupling efficiency at overlapping regions between Si nanofibers and silica ( \(\hbox {SiO}_{2})\) waveguides which is referred to near-field interactions. Transmitted power ratio and the group velocity of the propagated light are computed and depicted for the proposed coupler.     

Self-collimation and self-imaging effects in modulated waveguide arrays

Self-collimation and self-imaging are comparatively investigated for discretized light in engineered modulated arrays of optical waveguides. It is shown that self-imaging is a rather extraordinary effect related to a fortuitous band collapse and it is thus rather distinct from self-collimation.     

Modified surface plasmonic waveguide formed by nanometric parallel lines

In this paper, two kinds of modified surface plasmonic waveguides formed by nanometric parallel lines are proposed. The finite-difference frequency-domain method is used to study propagation properties of the fundamental mode supported by these surface plasmonic waveguide structures. Results show that the transverse magnetic field of the fundamental mode is mainly distributed in the face to face region formed by two rods. With the same geometrical parameters and the same working wavelength of 632.8~nm, in the case of rods with a triangular cross-section, the degree of localization of field is strong, i.e. the mode area is small, but the fraction of the modal power in the metal increases, so the effective index increases and the propagation length of the mode decreases. With the same geometrical parameters, relative to the case of a working wavelength of 632.8~nm, when working wavelength is large, the mode area of transverse magnetic field distribution is large, i.e. the degree of localization of field is weak, and the interaction of field and silver is weak too, then the effective index decreases, so the propagation length increases. The rounded radii of rods have a great influence on the performance of the surface plasmonic waveguides with rounded triangular cross-sections, but have little influence on the performance of surface plasmonic waveguides with rounded square cross-sections. Since the distribution of transverse magnetic field, effective index, propagation length and the mode area can be adjusted by the geometrical parameters, this kind of modified surface plasmonic waveguide can be applied to the field of photonic device integration and sensors.     

Reducing crosstalk between nanowire-based hybrid plasmonic waveguides

Hybrid plasmonic waveguides based on a surface oxidized dielectric nanowire placed on a metal surface can facilitate simultaneously deep subwavelength mode confinement and large propagation length. Directional coupling based on such waveguides are theoretically investigated. Much lower crosstalk is noticed for such hybrid plasmonic waveguides compared to conventional waveguides based on bare dielectric nanowires. Some modifications, such as vertically placing the metal surfaces or using a metallic block between the nanowires, are studied which can further reduce the crosstalk between two waveguides. The proposed low crosstalk structures based on hybrid plasmonic waveguides can provide a simple platform for plasmonic integration which can at the same time easily interface with traditional photonic circuits.     

多模干涉耦合器一般成像位置分析

自映像效应是多模波导的一个重要特性,利用多模波导自映像效应制成的多模干涉耦合器被广泛地应用于集成光学回路中。然而根据以往的文献要得出多模干涉耦合器的成像位置要经过一系列复杂的计算。根据多模干涉耦合器的自映像原理,对多模干涉耦合器的成像位置进行分析。成像位置与输入场位置和位置数密切相关,给出了成像位置的解析表达式,得出奇数、偶数的位置数的成像位置分别对应相同,并且奇、偶数的位置数所对应的成像位置之和为多模波导宽度的成像规律。用导模传输分析法验证了表达式和成像规律的正确性。根据成像位置的表达式和成像规律可以直接得出任意输入场位置和位置数所对应的成像位置。为一维和二维限制的多模干涉耦合器的设计提供了理论基础。     

Plasmonic properties of two-dimensional metallic nanoholes fabricated by focused ion beam lithography

Plasmonic metallic nanoholes are widely used to focus or image in the nanoscale field. In this article, we present the results of the design, fabrication, and plasmonic properties of a two-dimensional metallic pentagram nanohole array. The nanoholes can excite the extraordinary transmission phenomenon. We used the finite-difference time-domain method to design the transmission and the localized surface plasmon resonance electric field distribution in the near field. The focused ion beam method was used to fabricate the nanoholes. The transmittance in the far field was measured by a scanning spectrophotometer. The difference between the design and the experimental results may be caused by the conversion between the near field and the far field. The near field electric field distribution on the surface plasmonic nanoholes was measured by a near-field scanning optical microscope. From our results, we found that the maximum transmission of the nanoholes is 2.4. Therefore, our plasmonic nanohole can significantly enhance the transmission by exciting the plasmonic phenomenon on the surface of the nanostructures.     

深亚波长约束的表面等离子体纳米激光器研究

本文提出了一种新颖的基于半导体纳米线/空气间隙/金属薄膜 复合结构的表面等离子体纳米激光器, 并给出了理论研究和仿真分析. 这种结构通过金属界面的表面等离子体模式与高增益介质纳米线波导模式耦合, 从而使场增强效应得到显著提高. 同时通过数值仿真研究, 得到该混合波导结构的模式特性和增益阈值随空气槽宽度、纳米线半径的变化规律, 表明它可以实现对输出光场的深亚波长约束, 同时保持低损耗传输和高场强限制能力. 通过最优化选择, 最终得到纳米等离子体激光器的最优结构尺寸. 关键词： 表面等离子体 混合等离子体波导 纳米激光器