Distribution measurement of sodium octyl sulfate in multiphase microemulsion based on the extraction-spectrophotometric method

The determination of anionic surfactant contents in multiphase microemulsions, based on the extraction-spectrophotometric method, has been carried out. The multiphase microemulsion system we studied is composed of sodium octyl sulfate (SOS), n-hexanol, n-decane, and brine. The system shows Winsor type phase-transitions (Winsor I type Winsor III type Winsor II type) with changing salinity. We found that the extraction-spectrophotometric method used here is very useful for the determination of anionic surfactants in any microemulsion phases: the partition ratios of SOS in two different phases change continuously within the salinity region at which the phase transition takes place.     

Complex polarizability as used to analyze dielectric relaxation measurements

The effect of representing dielectric properties in terms of the complex polarizability ^c = – i is examined. Loss curves ( and tan ) are shifted towards higher frequencies, revealing the existence of new relaxations and allowing the clarifications of ones already known. We have calculated the shift ratios (at maximum or tan )/ (at maximum or tan ) from the more conventional empirical equations representing the dielectric behavior. Some examples are given.     

X-ray diffraction studies on homologous thallium soaps below the temperature range of the neat phase 2. Structure models of crystalline modifications in the temperature range below the neat phase

In Part 1 were discussed the results of X-ray diffraction measurements on homologous thallium soaps, the lattice parameters and the unit cells of the different phases: phase C₁, phase C₂, phase I, phase II, and the neat phase.The aim of Part 2 is the development of structural models, based on data on lattice parameters, packing densities of hydrocarbon chains and head groups. In order to supplement our experimental data we carried out infrared-spectroscopic measurements at different temperatures within the existence regions of these phases to get additional information on alterations in configurations of head groups and hydrocarbon chains of thallium soaps in these phase regions.By comparing the structural models we can generalize that the phase C₁, phase C₂, phase I, and phase II have some properties in common: they form crystalline structures, their unit cells are monoclinic, and the angles and are orthogonal. The amount of the lattice parametersc is equal to the distances of two molecular bilayers and/or twice the distance between the lamellae.Among the normal lamella, the molecules form a herring-bone-like packing. This indicates that the lamellar structure of the liquid-crystalline neat phase is already preformed in these crystalline modifications of phase C₁, phase C₂, phase I, and phase II. These crystalline phases differ in their lattice parameters and their packing coefficients. The transition from the crystalline phase I or phase II into the neat phase is accompanied by a temperature-dependent contraction of the distances between the lamellae, which originates in the fluidity of the hydrocarbon chains. Simultaneously, the lattice parametersa andb are drastically shortened and attain dimensions considerably lower than the values obtained in crystalline modifications. The X-ray scattering properties of the Tl⁺-ions suggest that the Tl⁺-ions exist in a fluid-like state within the head groups region of the neat phase.We came to the conclusion that the thallium-oxygen-bond is remarkably less polar than the bonds between alkali ions and oxygen resulting from the electro-negativity of the metal-oxygen-bonds of the alkali soaps, in comparison to the thallium soaps. Hence, the absence of polymorphic liquid-crystalline semiphases of thallium soaps is due to the low polarity of the thallium-oxygen-bond. Structure formation of Tl-soaps is mainly influenced by the hydrocarbon chain packing.     

Molecular orientation in hot-drawn poly(ethylene terephthalate) films as determined from the intrinsic polarized fluorescence

The groundstate-stable dimers in the non-crystalline regions of uniaxially drawn poly(ethylene terephthalate) (PET) films were used as chain-intrinsic fluorescent labels for studying the orientation distribution in the non-crystalline regions. As far as indicated by the spectra and the fluorescence decay law, the fluorescent group remains unchanged when the sample is uniaxially oriented by drawing above the glass transition temperature. In contrary to the behaviour of physically incorporated probe molecules, the orientation coefficient f ₂ ^F of the dimers is proportional to the amorphous orientation coefficientf ₂ ^A ; concerning the fluorescence signal, amorphous includes all the material outside the perfect crystal.During deformation, the orientation coefficientf ₂ ^F follows approximately a superposition curve of crystallite-like orientation, separable in the initial range of stretching ratio <2.5, and of true-amorphous orientation of the affine network type that becomes noticably at >3.At temperatures closely aboveT _g, and within the selected range of stretching parameters, the fluorescence intensity of PET remains nearly constant with increasing stretching ratio; at >2.5, where the maximum crystallite orientation is achieved and the increase of amorphous orientation becomes noticably, a slight augmentation of the dimer concentration is observed.     

Phase behavior and dynamic properties in mixed systems of anionic and cationic surfactants: lithium perfluorooctanesulfonate/diethanolheptadecafluoro-2-undecanolmethylammonium chloride (DEFUMAC) and lithium dodecyl sulfate/DEFUMAC aqueous mixtures

Two ternary phase diagrams of the cationic perfluorosurfactant diethanolheptadecafluoro-2-undecanolmethylammonium chloride (DEFUMAC) with an anionic perfluorosurfactant lithium perfluorooctanesulfonate (LiFOS) and an anionic hydrocarbon surfactant lithium dodecyl sulfate (LiDS) have been established at 25°C. The total surfactant concentration was less than 20wt%. In a wide mixing region of the LiFOS/DEFUMAC system, a lamellar-type phase,P , was identified by its texture under a polarization microscope and by its x-ray diffraction pattern. Dispersed fragments ofP -phase are present in the dilute solutions in which one surfactant was in excess. The anisotropy of electrical conductivity, flow birefringence, dynamic light scattering, and electric briefringence demonstrate that theP fragments are disk-like with a radius of 0.7 m. The disk-likeP particles are transformed by shear into a spherical aggregate ofL above a critical shear gradient. LiDS/DEFUMAC mixed solution forms dispersed and precipitatedL in the dominant region. Radius and micropolarity of the dispersedL aggregates are decreased as the ratio of LiDS:DEFUMAC approaches 1:1. On the basis of x-ray diffraction measurement the structure of precipitatedL -phase seems to consist of monolayers.     

Phase diagram of the system dihexadecylphosphatidylcholine/dihexadecyl-phosphatidic acid/water/NaOH at pH=14

Differential-scanning-calorimetry, freeze-fracture electron microscopy, and³¹P-NMR spectroscopy were used to study the lyotropic and thermotropic properties of the system dihexadecylphosphatidylcholine/dihexadecylphosphatidic acid/water/ NaOH in dispersion with excess water at pH=14. The phase diagram showed that both phospholipids are demixed nearly completely in the gel phase. The coexistence of theP and theB -phase in the mixtures was pointed out in the freeze-fracture electron micrographs by the ripple structure (P -phase) and by the lamellar structure (B -phase).     

Dielectric properties of moist CaCO3 filled polyethylene composites

The capacitance and the dielectric loss tangents of CaCO₃ filled polyethylene composites were studied. Composite samples, prepared by polymerizing ethylene on the surfaces of fillers, pre-treated by polymerization catalysts, were compared to normal mechanical mixtures. Dielectric dispersion,, and loss, , proved to be sensitive to heating or vacuum treatment. Investigation of samples under conditions of different relative humidities showed that the dielectric dispersion is due to adsorbed water. Both and increased with decreasing frequency and the ratio of loss and dispersion was nearly constant. Dielectric data measured at different relative humidities could be represented by a single Cole-Cole plot. Samples soaked in water for different periods yielded qualitatively similar but quantitatively different Cole-Cole plots. Composite samples showed higher losses at similar humidities.Possible interpretations in terms of a molecular relaxation model, an interfacial relaxation model, including a charged double layer mechanism, percolation theory and the universal response theory were examined, but none was able to fully explain the observed phenomena.     

Zu einigen Besonderheiten des thermischen Zerfalls von Ni(II)-Komplexen mit dreizähnigen Schiffschen Basen

Zusammenfassung Es wurde eine Reihe von Komplexen des zweiwertigen Nickels mit den Schiffbasen H₂L,H₂L der Zusammensetzung NiL·ROH(R=Me, Et, Pr, i-Pr)und NiL ·ROH (R=Me, Et, Pr, i-Pr, Bu) hergestellt und deren thermischer Zerfall untersucht. Es wurde festgestellt, dass bei den Addukten NiL·ROH der Zerfall unter Abspaltung des Alkohols (Zwischenprodukt NiL) verläuft, während bei NiL·ROH sofort nach der Abspaltung des Alkohols zur Massenzunahme auf TG-Kurve durch Oxidation des Stoffes kommt. Das Plateau, das dem Zwischenprodukt NiL entspricht, ist hier nur in der Ineratmosphäre erhaltbar. Es wurden auch die Aktivierungsenergien für die Abspaltung des Alkohols berechnet.

---

Ni(II) Schiff base complexes of compositions NiL ROH (R=Me, Et, Pr, i-Pr) and NiL·ROH (R=Me, Et, Pr, i-Pr, Bu) were prepared and investigated by methods of thermal analysis. The thermal decomposition of NiL·ROH led to NiL (plateau in TG curve), whereas NiL·ROH underwent a similar decomposition only in an inert atmosphere (N₂); thermal decomposition in air involved alcohol fragmentation, followed by a mass increase due to oxidation by atmospheric oxygen. The activation energy of alcohol fragmentation was calculated.

---

NiL · ROH (R=-, -, - ) NiL-ROH (R=-, -, -, -, ). , NiL ] NiL — . , . .

---

---

Wir möchten uns sehr herzlich bei Doz. RNDr. E. Jóna, CSc. und RNDr. I. Horváth, CSc. für die Messungen in der Stickstoffatmosphäre in SAV Bratislava bedanken.     

Interpretation of energy stability for Ti27+ and Ti26+ dimers

By using the interacting bonds method (IBM), it has been established that for the chloride Ziegler systems (TiCl₄+AlR₃) for polymerization the formation of Ti ₂ ⁷⁺ and Ti ₂ ⁶⁺ pairs is a thermodynamically favorable process.

---

(TiCl₄+AlR₃) () , Ti ₂ ⁷⁺ Ti ₂ ⁶⁺ .

     

Phase and miscibility behavior of binary lipid systems

Differential scanning calorimetry was applied to study the phase diagrams of the following binary lipid systems: myristic acid (C₁₃COOH) / pentadecanoic acid (C₁₄COOH); palmitic acid methyl ester (C₁₅COOMe) / heptadecanoic acid methyl ester (C₁₆COOMe); palmitic acid methyl ester (C₁₅COOMe) / stearic acid methyl ester (C₁₇COOMe); palmitic acid methyl ester (C₁₅COOMe) / arachidic acid methyl ester (C₁₉COOMe). A distinct succession in the phase diagram types and phase regions was observed, according to the chemical structure of the mixing components.In the systems C₁₃COOH/C₁₄COOH; C₁₅COOMe/C₁₆COOMe and C₁₆COOMe/ C₁₇COOMe, both components are completely miscible in the low- and high-temperature phase. Contrasting with these three binary lipid systems, the system C₁₅COOMe/ C₁₄COOMe shows complete miscibility only in the high-temperature phase, but almost complete demixing in the solid state. In the phase diagram an incongruent melting 11 complex is built up. This complex forms an eutectic mixture with the phase of C₁₅COOMe and a peritectic system with C₁₉COOMe.     

An ab initio molecular orbital study of the grignard reagents CH3MgCl and [CH3MgCl]2: The Schlenk equilibrium

Ab initio molecular orbital calculations are used to study the modified Schlenk equilibrium: 2RMgCl (RMgCl)² MgR₂ + MgCl₂ Mg(Cl₂)MgR₂ with R=H and CH₃. In the absence of any solvents, calculations indicate that the formation of the various possible bridged dimers (RMgCl)₂ is substantially exothermic. However, using dimethylether as a model solvent, we show that the formation of the dimer (Me₂O)(CH₃)Mg(Cl₂)Mg(CH₃)(OMe₂) is exothermic only when entropic effects are included.     

Effect of coexistent hydrocarbon phase on the volume behavior of adsorbed film and micelle of dodecyltrimethylammonium chloride

Interfacial tension () between aqueous dodecyltrimethylammonium chloride (DTAC) solution and benzene was measured as a function of pressure (p) and concentration. The/p was observed to change discontinuously at the critical micelle concentration; this indicates that the micelle formation of DTAC in the aqueous solution coexisting with benzene can be treated like the appearance of a macroscopic phase. It was shown by drawing the vs.A curves that hydrocarbon, such as benzene, cyclohexane, and hexane, make the adsorbed film of DTAC expand. The volume behavior of the micelle with benzene molecules solubilized was found to bear a strong resemblance to that of the adsorbed film at the water/benzene interface. The difference in the molar volume value of adsorbed DTAC among the coexistent hydrocarbon phases was attributed to the difference in the contribution of the hydrocarbon molecules to the interfacial excess volume; the number of the solubilized hydrocarbon molecules was evaluated to be one or two a micelle.     

Determination of the regime in the reverse wilson chamber at critical supersaturation measurements

The pressure in the Reverse Wilson Chamber (RWC) was directly measured at different rates of compression of the gas mixture. It was shown that at compression time in the range from 0.06 to 0.3 s an intermediate, between adiabatic and isothermal, process took place in the chamber. To obtain the relative pressure increase P _m /P _at from the values of the relative gas compression V/V, a calibration of the experimental set-up was carried out. The calibration showed that the values of critical supersaturationSc for water condensation on hexadecane, estimated for intermediate regime of the gas compression, were reduced with respect to the values calculated when the adiabatic regime was assumed. This fact confirmed the conclusions made earlier [1–3] that the classical theory was not applicable in this case of heterogeneous phase formation and that the line tension < 0 should be taken into account. Moreover, in an atmosphere of very pure argon (instead of room air [1–3]) the critical supersaturation turned out to be independent of the initial state of undersaturationS _o . The more accurate values obtained for condensation of water on hexadecane were: lnS _c =0.204 (instead of the maximum value obtained earlier: lnS _c =0.26) and=–1.9×10^–5 dyne (instead of=–1.5×10^–5 dyne).     

Preparation of micron-size monodisperse polymer microspheres having cationic groups

Micron-size monodisperse crosslinked polymer microspheres having chloromethyl groups were prepared by seeded copolymerization of styrene, divinylbenzene, and chloromethylstyrene in the presence of 2.1- monodisperse polystyrene seed particles produced by dispersion polymerization. The modification reaction of chloromethyl groups on the surfaces with polyamines such as triethylenetetramine and ethylenediamine was carried out. From the measurements of potential and the amount of chloride ion released, the introduction of a large number of cationic groups at the surfaces was confirmed.Part CXXXI of the series Studies on suspension and Emulsion.     

Effects of pressure and solvent on the diffusion of aromatic compounds through polymers

The diffusion of six azo and five anthraquinone derivatives through nylon 6, poly(ethylene terephthalate) and secondary cellulose acetate films were studied under high hydrostatic pressures of up to 3000 bar and at temperatures 80–130 °C, by analyzing the diffusion profiles yielded in a stacked multiple film, placed in the solution of the diffusant. It was found that the diffusion coefficient,D, of the diffusant decreased with increasing pressure, giving a linear relationship between InD and the pressure, the slope of which gave the activation volume for the diffusion,V . It was revealedV increased linearly with increasing intrinsic molecular volume of the diffusant,V _w , the slopes being different between the azo and the anthraquinone derivatives. The ratio ofV toV _w (V /V _w ) ranged from 0.13 to 0.93, depending in a sensitive manner on the degree of swelling of the polymer matrix which in turn was varied by the solvent. The overall results could be explained in accordance with the formulation,V _{f, local} +V =V _w , whereV _{f, local} represents the free volume contribution. It was proposed thatV _w is increased by solvation when the solvent is good for the diffusant.     

Peroxidase oxidations of hydroquinone and p-cresol in AOT reversed micelles

The enzymatic activities of horseradish peroxidase solubilized in reversed micelles of bis(2-ethylhexyl)sodium sulfosuccinate formed in octane at various _o values ( _o=[H₂O]/[AOT]) were investigated by studying the catalytic oxidation of hydroquinone and p-cresol. These enzymatic reactions obeyed Michaelis-Menten kinetics. The turnover number of the enzymatic reaction of hydroquinone solubilized in the water pool increased with a decrease in _o value. On the other hand, the dependence of the turnover number of the enzymatic reaction of p-cresol solubilized in octane on the _o value was similar to that in the case of hydroquinone, although even at higher _o values the turnover number was smaller than that in water. Furthermore, it was suggested by spectrophotometric and circular dichroism measurements that the conformational change of enzyme induced the change in enzymatic activity.     

Effect of thick fixed-charge layers on electrostatic interaction — a theoretical approach

The electrostatic interaction pressure of charged surface layers is considered qualitatively and quantitatively. In the case of mutual penetration of the surface layers in addition to Maxwell stress and osmotic resp. hydrostatic pressure an isotropic stress on the fixed charges carrying molecules of the surface layers has to be taken into account. The derivation of the pressure-distance equations is given starting from both thermodynamic/electrostatic and hydrostatic/electrostatic principles. A possible biological significance of the additional stress is discussed emphasizing its role in modifying the structure of surface layer molecules.List of symbols e ₀ elementary charge - k Boltzmann constant - n _i concentration of theith ionic species in the bulk solution - P hydrostatic pressure - P hydrostatic pressure in the bulk volume (× ) - P ^h integration constant, independent on ×:P ^h =P(h) - T absolute temperature - Z _i electrovalence of theith ionic species - thickness of the surface layer - , ₀ relative and absolute permittivities - II(×) osmotic pressure at position × - II osmotic pressure in the bulk solution (× ) - osmotic pressure in the symmetry plane of interacting identical surface layers (electric field strength equals zero) - integration constant, independent on ×: - _e ^h electrostatic component of the disjoining pressure _e ^h = _e (h) - (×) mobile charge density profile (cations and anions of the electrolyte) - (×) fixed charge density profile - ^t(x) total charge density profile ( ^t = +) - ¹(x) fixed charge density profile of one of the two surface layers ( ¹(×) 0 for 0×) - (×) electric potential profile     

Crystal structure of ionic and non-ionic surfactants based on polyoxyethylenated dodecanol: A13C-CP-MAS-NMR and x-ray investigation

Crystal structure of monodisperse non-ionic surfactants having the general formula C₁₂H₂₅O–(CH₂–CH₂–O)_nH (C₁₂E_n),n=7,9, 10, 15, 16 and ionic derivatives, C₁₂H₂₅–O–(CH₂–CH₂–O)_n–CH₂COONa (C₁₂E_nC),n=3,4,5,6,7,9, 12 has been investigated by¹³C-CP-MAS-NMR and x-ray diffraction. A structural model, in which aliphatic and polyether segments are segregated in bilayers stacking parallel to the elongation direction of the molecules, fits the experimental data for both series. The experimental values of the repeat distance along the stacking directiond(001) are linearly dependent onn and the slope is nearly equal to twice the repeat distance of7/2 helix conformation, which is typical for crystalline polyethyleneoxide. The values ofd(001) agree very well with the values expected for the C₁₂ segment in a planar zig-zag conformation, which is tilted with respect to the polyerther segment (7/2 helix conformation) in such a way that both the aliphatic and the polyether regions adopt the mass density of the corresponding crystalline compound. Two additional phases have been detected for C₁₂E_nC. One of them is probably characterized by the planar zig-zag conformation of the polyether chain. The meader model, previously proposed in the literature for surfactants containing polyethylene oxide segments is inconsistent with the obtained experimental data.     

The effect of segment length and concentration on dielectric properties of polypropyleneoxide-based polyurethanes

Three series of segmented polyurethanes based on MDI, variable chain extender, and polypropylene oxide of MW=1000, 2000, and 3000 were synthesized and their dielectric behavior examined.Dielectric relaxations in the segmented polyurethanes were investigated between –150°C and +150°C in the 100 Hz to 10 kHz range. In general, three transitions, designated as, , and were observed, and ascribed in accordance with calorimetric relaxations to glass transitions of the hard and soft segments, and Shatzki-type motions, respectively. The effect of structure variables such as soft segment size, type of chain extender (ethylene glycol, butane diol, and hexane diol) and soft segment concentration, as well as the effect of interaction of the phases on dielectric properties was discussed. It was found that a certain degree of phase mixing exists in all series, detected by the variation of theT _g of the soft segment with soft segment concentration, contrary to DSC results, which was ascribed to thermal treatment prior to the dielectric measurements. It appears that interfacial polarization becomes important only above the transition temperature.     

Differential scanning calorimetric study of phase changes in poly(ethylene glycol) dodecyl ether-water systems

Phase changes in binary systems of poly(ethylene glycol) dodecyl ethers, C₁₂H₂₅(OC₂H₄)_xOH (x=5, 6 and 8) with water have been studied between –40 to 100 C by differential scanning calorimetry. A number of transitions, including the liquidliquid phase separation, were seen and the transition temperatures and enthalpy changes were determined. The observed temperatures were generally in good agreement with reported phase diagrams. In the C₁₂E₅ system, three of the four three-phase lines were seen and a more complete phase diagram is suggested for the water-rich part of the system. Most of the phase changes seen above 0 C are accompanied by small endothermic enthalpy changes of 0.7 to 0.9 kJ (mol C₁₂E_x)^–1, independent of system studied, type of transition and transition temperature. Water-rich solutions and liquid crystalline phases separate upon freezing into ice and crystals of hydrated amphiphile. Eutectics are developed at the following temperatures and compositions: C₁₂E₅ –3.0 C and 54 wt % C₁₂E₅; Q₂E₆ –4.5 C and 54 wt % C₁₂E₆, C₁₂E₈ –3.8 C and 49 wt % C₁₂E₈.