Microwave-assisted amination from aryl triflates without base and catalyst

[reaction: see text] Aryl triflates are effectively converted to the corresponding anilines under microwave irradiation in 1-methyl-2-pyridone (NMP) without base and catalyst. Aryl triflates substituted with both electron-poor and electron-rich groups give good to excellent yields. It is noteworthy that the halogenated aryl triflates can chemoselectively react with amines to afford halogenated anilines.     

Cross-coupling reactions of (1-fluorovinyl)methydiphenylsilane(1) with aryl halides and aryl triflates

The cesium fluoride (CsF)-assisted cross-coupling reaction of (1-fluorovinyl)methyldiphenylsilane (1) with aryl halides and aryl triflates was examined. The reaction with aryl iodides smoothly proceeded to afford the corresponding (1-fluorovinyl)arenes in the presence of a catalytic amount of CuI and Pd(PPh(3))(4) in aprotic polar solvents such as DMF, DMI, DMA, and NMP in good yields. A variety of functional groups (nitro, ester, ketone, and ether) on the aromatic rings can be tolerated under these mild conditions. Aryl iodides are superior to aryl bromides as the coupling reaction partner. The cross-coupling reaction of 1 with aryl triflates instead of aryl halides was also accomplished in the presence of tetrabutylammonium iodide (n-Bu(4)NI) as the additive under similar conditions.     

4-Stannylcoumarins as Useful Reagents in a New Approach to Neoflavonoids

4-Trimethylstannylcoumarins 2, conveniently obtained from the corresponding 4-triflyloxycoumarins 1, undergo Pd(0)/CuI-cocatalyzed cross-coupling reactions with a variety of aryl iodides to afford 4-arylcoumarins 4 in moderate to good yields. Aryl triflates are less effective as coupling partners.     

Coupling Reactions of Alkynylsilanes Mediated by a Cu(I) Salt: Novel Syntheses of Conjugate Diynes and Disubstituted Ethynes

Reaction of 1-trimethylsilylalkyne with copper(I) chloride in a polar solvent, DMF, at 60 degrees C under an aerobic conditions smoothly undergoes homo-coupling to give the corresponding symmetrical 1,3-butadiynes in 70-99% yields. In addition, (arylethynyl)trimethylsilanes are found to couple with aryl triflates and chlorides in the presence of Cu(I)/Pd(0) (10 mol %/5 or 10 mol %) cocatalyst system to give the corresponding diarylethynes in 49-99% yields. The cross-coupling reaction is applied to a one-pot synthesis of the corresponding unsymmetrical diarylethynes from (trimethylsilyl)ethyne via sequential Sonogashira-Hagihara and the present cross-coupling reactions using two different aryl triflates. The reactions of (arylethynyl)trimethylsilanes with aryl(chloro)ethynes in the presence of 10 mol % of CuCl also yield the corresponding unsymmetrical 1,3-butadiynes in 43-97% yields.     

Ruthenium-catalyzed transformation of aryl and alkenyl triflates to halides

Aryl triflates were transformed to aryl bromides/iodides simply by treating them with LiBr/NaI and [Cp*Ru(MeCN)(3)]OTf. The ruthenium complex also catalyzed the transformation of alkenyl sulfonates and phosphates to alkenyl halides under mild conditions. Aryl and alkenyl triflates undergo oxidative addition to a ruthenium(II) complex to form η(1)-arylruthenium and 1-ruthenacyclopropene intermediates, respectively, which are transformed to the corresponding halides.     

Aryl triflates: useful coupling partners for the direct arylation of heteroaryl derivatives via Pd-catalyzed C-H activation-functionalization

Aryl triflates were found to be suitable partners for the palladium catalyzed direct arylation of heteroaromatics via C-H activation-functionalization. The reaction conditions and the catalyst have a determining influence on the yields. The system combining PPh3 and Pd(OAc)2 using KOAc as base and DMF as solvent promotes the selective 2- or 5-arylations in moderate to high yields. Several heteroaromatics such as furan, thiophene, thiazole or oxazole derivatives have been employed successfully. The electronic properties of the aryl triflates also have a decisive influence on the yields of the coupling products. Electron-rich aryl triflates gave satisfactory results, whereas the electron-poor ones led to the formation of phenols.     

Scope of aminomethylations via Suzuki-Miyaura cross-coupling of organotrifluoroborates

We previously reported the Suzuki-Miyaura reaction of N,N-dialkylaminomethyltrifluoroborates with aryl bromides. Herein, we report a further investigation of the scope and limitations of this palladium-catalyzed aminomethylation reaction. Aryl chlorides, iodides, and triflates coupled in good to excellent yields to give N,N-dialkylbenzylic amines. The aminomethylation of alkenyl bromides was also examined.     

Palladium-catalyzed intermolecular coupling of aryl halides and amides

[formula: see text] The first general intermolecular C-N bond-forming reactions between aryl halides and amides were realized using a palladium catalyst with Xantphos as the ligand. Aryl triflates, carbamates, and sulfonamides are also viable substrates for the amidations, which proceed at 45-110 degrees C with 1-4 mol% of Pd catalyst in 66-99% yields and exhibit good functional group compatibility.     

Dissociative electron attachment to triflates

Gas phase studies of dissociative electron attachment to simple alkyl (CF(3)SO(3)CH(3)) and aryl (C(6)H(5)SO(3)CF(3) and CF(3)SO(3)C(6)H(4)CH(3)) triflates, model molecules of nonionic photoacid generators for modern lithographic applications, were performed. The fragmentation pathways under electron impact below 10 eV were identified by means of crossed electron-molecular beam mass spectrometry. Major dissociation channels involved C-O, S-O, or C-S bond scissions in the triflate moiety leading to the formation of triflate (OTf(-)), triflyl (Tf(-)), or sulfonate (RSO(3)(-)) anions, respectively. A resonance leading to C-O bond breakage and OTf(-) formation in alkyl triflates occurred at electron energies about 0.5 eV lower than the corresponding resonance in aryl triflates. A resonance leading to S-O bond breakage and Tf(-) formation in aryl triflates occurred surprisingly at the same electron energies as C-O bond breakage. In case of alkyl triflates S-O bond breakage required 1.4 eV higher electron energies to occur and proceeded with substantially lower yields than in aryl triflates. C-S bond scission occurred for all presently studied triflates at energies close to 3 eV.     

Heterogeneous Pd/C-catalyzed ligand-free, room-temperature Suzuki-Miyaura coupling reactions in aqueous media

A mild and efficient ligand-free Suzuki-Miyaura coupling reaction catalyzed by heterogeneous Pd/C was developed. Aryl bromides and triflates undergo the cross-coupling with aryl boronic acids in excellent yields without the presence of any additives in aqueous media at room temperature. Aryl vinyl boronic acids are also applicable to this coupling reaction and provide the trans-stilbene derivatives in high yields. The application of wet-type Pd/C to the coupling reaction was achieved without any loss of activity under aerobic conditions, and the reuse of Pd/C is feasible for a fifth run without significant loss of activity. Inductively coupled plasma (ICP) mass-spectrometric analysis of the filtrate from the reaction mixture of 4-bromonitrobenzene with phenylboronic acid demonstrated that the palladium metal hardly leached into the solution within the limits of the detector (<1 ppm), thus suggesting that the present Suzuki-Miyaura reaction proceeded by heterogeneous catalysis.     

Decarboxylative Aminomethylation of Aryl‐ and Vinylsulfonates through Combined Nickel‐ and Photoredox‐Catalyzed Cross‐Coupling

A mild approach for the decarboxylative aminomethylation of aryl sulfonates by the combination of photoredox and nickel catalysis through C?O bond cleavage is described for the first time. A wide range of aryl triflates as well as aryl mesylates, tosylates and alkenyl triflates afford the corresponding products in good to excellent yields.     

Palladium-catalyzed direct hydroxymethylation of aryl halides and triflates with potassium acetoxymethyltrifluoroborate

Suzuki-Miyaura cross-coupling reactions of aryl halides and triflates with potassium acetoxymethyltrifluoroborate afforded the corresponding aryl and heteroaryl methanol products in moderate to excellent yields.     

Oxidative addition of aryl tosylates to palladium(0) and coupling of unactivated aryl tosylates at room temperature

Aryl tosylates are attractive substrates for Pd-catalyzed cross-coupling reactions, but they are much less reactive than the more commonly used aryl triflates. We report the oxidative addition of aryl tosylates to Pd(PPF-t-Bu)[P(o-tolyl)3] and to Pd(CyPF-t-Bu)[P(o-tolyl)3] at room temperature to produce the corresponding palladium(II) aryl tosylate complexes. In the presence of added bromide ions, arylpalladium(II) bromide complexes were formed. The rate of oxidative addition was accelerated by addition of either coordinating or weakly coordinating anions, and the reactions were faster in more polar solvents. The mild conditions for oxidative addition allowed for the development of Pd-catalyzed Kumada couplings and amination reactions of unactivated aryl tosylates at room temperature. The catalysts for these mild couplings of aryl tosylates were generated from palladium precursors and the sterically hindered Josiphos-type ligands that induced oxidative addition of aryl tosylates to Pd(0) at room temperature.     

Direct aminoalkylation of arenes, heteroarenes, and alkenes via Ni-catalyzed Negishi cross-coupling reactions

A room-temperature Ni-catalyzed cross-coupling of aryl, heteroaryl, and alkenyl electrophiles with aminoalkylzinc bromides, readily available from the corresponding aminoalkyl chlorides via Grignard reagents, was developed. The reaction allows a convenient one-step preparation of various aminoalkyl products, including piperidine and tropane derivatives. Such functionalized amine moieties are widely present in various biologically active molecules. Aryl, heteroaryl, and alkenyl iodides, bromides, chlorides and triflates are suitable electrophiles. A short total synthesis of two natural products, (±)-galipinine and (±)-cusparine, is also reported.     

Convenient Stille carbonylative cross-couplings using molybdenum hexacarbonyl

Palladium catalysis was used in Stille-type carbonylative cross-couplings employing Mo(CO)₆ as the carbon monoxide source. Robust and convenient transformations were carried out in closed vessels at 100 °C, providing a set of diaryl ketones in good yields. Aryl triflates and bromides were used as coupling partners with aryl stannanes. Inclusion of the Mo(CO)₆ destabilizing agent DBU made this protocol operationally simple and suppressed side-product formation.     

Palladium‐Catalysed Direct Cross‐Coupling of Organolithium Reagents with Aryl and Vinyl Triflates

A palladium‐catalysed cross‐coupling of organolithium reagents with aryl and vinyl triflates is presented. The reaction proceeds at 50 or 70 °C with short reaction times, and the corresponding products are obtained with moderate to high yields, with a variety of alkyl and (hetero)aryl lithium reagents.     

Reactions of triflate esters and triflamides with an organic neutral super-electron-donor

The bis-pyridinylidene 13 converts aliphatic and aryl triflate esters to the corresponding alcohols and phenols respectively, using DMF as solvent, generally in excellent yields. While the deprotection of aryl triflates has been seen with other reagents and by more than one mechanism, the deprotection of alkyl triflates is a new reaction. Studies with (18)O labelled DMF indicate that the C-O bond stays intact and hence it is the S-O bond that cleaves, underlining that the cleavage results from the extraordinary electron donor capability of 13. Trifluoromethanesulfonamides are converted to the parent amines in like manner, representing the first cleavage of such substrates by a ground-state organic reducing reagent.     

Lithium aminoborohydrides 17. Palladium catalyzed borylation of aryl iodides, bromides, and triflates with diisopropylaminoborane prepared from lithium diisopropylaminoborohydride

The Alcaraz-Vaultier borylation of aryl halides and triflates is reported utilizing diisopropylaminoborane (BH₂N(ⁱPr)₂) prepared from the corresponding lithium aminoborohydride (LAB reagent). BH₂N(ⁱPr)₂, prepared by reacting lithium diisopropylaminoborohydride with trimethylsilyl chloride, provided the most consistent isolated yields from this reaction. Catalytic amounts of palladium dichloride produced the highest yields from aryl iodides, while catalytic tris(dibenzylideneacetone)dipalladium(chloroform) provided the best yields for aryl bromides and triflates. This route to boronic acids is mild enough to tolerate various functionalities and for the first time employs aryl triflates as substrates for the Alcaraz-Vaultier borylation. In addition, it was found that both boronic acid and ester compounds could be isolated from the reaction mixture utilizing simple work-up procedures. Treatment of the reaction intermediate with an acid/base work-up provided the corresponding boronic acid, while treating the same intermediate with a diol, such as neopentyl glycol, afforded the corresponding boronic ester.     

Hydrogenation of azides over copper nanoparticle surface using ammonium formate in water

Aryl azides undergo clean reduction by copper nanoparticles and ammonium formate in water. The surface hydrogen on copper nanoparticles is considered to be the active reducing species. A variety of functionalized aryl azides and aryl sulfonyl azides are reduced by this procedure to the corresponding amines with excellent chemoselectivity in high yields.     

Carbon-carbon cleavage of aryl diamines and quinone formation using sodium periodate: a novel application

A first novel synthetic utility of sodium periodate for aryl diamine carbon-carbon cleavage is described. Aryl 1,2-diamine compounds were successfully converted into corresponding nitriles, while the developed method is also useful for the preparation of quinones from corresponding aryl 1,4-diamine compounds. The advantages of this protocol are shorter reaction time and mild reaction conditions to obtain moderate to good yields.