One-step synthesis of 5-acetyl-2-amino-4-aryl-3-cyano-4H-pyrano[3,2-b]indoles. Molecular and crystal structure of 5-acetyl-2-amino-4-(4"-chloro-3"-nitrophenyl)-3-cyano-4H-pyrano[3,2-b]indole

A one-step procedure was developed for the synthesis of 5-acetyl-2-amino-4-aryl-3-cyano-4H-pyrano[3,2-b]indoles involving the three-component reaction of 1-acetylindol-3(2H)-one with aromatic aldehydes and malononitrile in ethanol in the presence of triethylamine as the catalyst. The structure of 5-acetyl-2-amino-4-(4"-chloro-3"-nitrophenyl)-3-cyano-4H-pyrano[3,2-b]indole was established by X-ray diffraction analysis.     

Synthesis of 4-acetyl-5(3)-amino-3(5)-methylpyrazoles and pyrazolo[3,4-d]pyrimidines from diacetylketeneN,S-acetal

Isomeric 4-acetyl-5-amino-3-methyl- and 4-acetyl-3-amino-5-methylpyrazoles (2, 3) were formed in the reaction of hydrazines with 3-[amino(methylthio)methylene]pentan-2,4-dione (1) (diacetylketeneN,S-acetal). Pyrazolo[3,4-d]pyrimidines (5a,b) were synthesized by condensation of 4-acetyl-5-amino-1,3-dimethylpyrazole (2a) with amide dimethylacetals followed by treatment with ammonium acetate. The structures of the compounds obtained were confirmed by¹³C and¹⁵N NMR spectroscopy.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1429–1433, August, 1993.     

Various approaches to the use of 3-acetyl-2-amino-4-hydroxy-1,3-pentadienecarbonitrile in heterocyclic synthesis

Two approaches to the use of 3-acetyl-2-amino-4-hydroxy-1,3-pentadienecarbonitrile (1) in heterocyclic synthesis are considered. A method for preparing 3-acetyl-4-amino-5-cyano-2-methylpyridine directly from1 andN,N-dimethylformamide dimethylacetal (DMF DMA) was proposed, together with a synthetic route to 2-(2-amino-3-cyano-6-hydroxy-phenyl)-8-cyano-5-hydroxy-4-methylquinoline based on the transformation of hydroxyvinyl ketone1 into its diphenylboron chelate and condensation of the latter with DMF DMA. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 127–130, January, 1997.     

Synthese von 4H-Pyrano[2,3-d]pyrimidinen

Summary Good yields of substituted 5-(5R-2-furyl)-4H-pyrano[2,3-d]pyrimidines4 were obtained in the reaction of 2-ethoxymethyleneamino-3-cyano-4H-pyranes2 with ammonia. Compounds2 were prepared by the condensation of the starting 2-amino-5-acetyl-3-cyano-6-methyl-4H-pyranes1 with ethyl orthoformate. Spectral properties of the bicyclic system4 in relation to compounds3 are discussed.

     

2-[3-(Trifluoromethyl)phenyl]furo[3,2-b]pyrroles: synthesis and reactions

The synthesis and reactions of methyl 2-[3-(trifluoromethyl)phenyl]-4H-furo[3,2-b]pyrrole-5-carboxylate (1a) are described. Upon reaction with methyl iodide, benzyl chloride, or acetic anhydride, this compound gave N-substituted products 1b-d. By hydrolysis of compounds 1a-c, the corresponding acids 2a-c were formed, or by reaction with hydrazine-hydrate, the corresponding carbohydrazides 3a-c were formed. By heating 2-[3-(trifluoromethyl)phenly]-4H-furo[3,2-b]pyrrole-5-carboxylic acid (2a) in acetic anhydride, 4-acetyl-2-[3-(trifluoromethyl)phenyl]furo[3,2-b]pyrrole (4) was formed. By hydrolysis of 4, 2-[3-(trifluoromethyl)phenyl]-4H-furo[3,2-b]pyrrole (5a) was formed, and reactions with methyl iodide or benzyl chloride gave N-substituted products 5b-c. The reaction of 4 with dimethyl butynedioate gave substituted benzo[b]furan 6. Compound 3a reacted with triethyl orthoesters giving 7a-c, which afforded with phosphorus (V) sulphide the corresponding thiones 8a-c. The thiones 8a-c reacted with hydrazine hydrate to form hydrazine derivatives 9a-c. The reaction of triethyl orthoformiate with compounds 9a-c led to furo[2′,3′: 4,5]pyrrolo[1,2-d][1,2,4]triazolo[3,4-f][1,2,4]triazines 10a-c. Hydrazones 11a-c were formed from 3a-c and 5-[3-(trifluoromethyl)phenyl]furan-2-carboxaldehyde. The effect of microwave irradiation on some condensation reactions was compared with “classical” conditions. The results showed that microwave irradiation shortens the reaction time while affording comparable yields.     

A facile and novel synthesis of 1,6-naphthyridin-2(1H)-ones

A new and convenient procedure for the synthesis of 1,6-naphthyridin-2(1H)-ones and their derivatives is described. In the first scheme 5-acetyl-6-[2-(dimethylamino)ethenyl]-1,2-dihydro-2-oxo-3-pyridinecarbonitrile ( 4 ) obtained by the reaction of N,N-dimethylformamide dimethyl acetal with 5-acetyl-1,2-dihydro-6-methyl-2-oxo-3-pyridinecarbonitrile ( 3 ) was cyclized to 1,2-dihydro-5-methyl-2-oxo-1,6-naphthyridine-3-carbonitrile ( 5 ) by the action of ammonium acetate. Thermal decarboxylation of acid 7 obtained from the hydrolysis of nitrile 5 led to a mixture of 5-methyl-1,6-naphthyridin-2(1H)-one ( 8 ) and its dimer 9 . Hydrazide 11 obtained from nitrile 5 in two steps was converted to 3-amino-5-methyl-1,6-naphthyridin-2(1H)-one ( 12 ) by the Curtius rearrangement. The amino group of 12 was readily replaced by treatment with aqueous sodium hydroxide to yield 3-hydroxy-5-methyl-1,6-naphthyridin-2(1H)-one ( 13 ). In the second scheme, Michael reaction of enamines of type 20 with methyl propiolate, followed by ring closure gave 5-acyl(aroyl)-6-methyl-2(1H)-pyridinones ( 21 ) which in turn were treated with Bredereck's reagent to produce 5-acyl(aroyl)-6-[2-(dimethylamino)ethenyl]-2(1H)-pyridinones ( 22 ). Treatment of 22 with ammonium acetate led to the formation of 1,6-naphthyridin-2(1H)-ones 23 .     

Reactions of 3,3-dialkyl-2,3-dihydro-6-trifluoromethyl-4-pyrones with hydroxylamine. Synthesis and structures of 5-(1,1-dialkyl-2-hydroxyethyl)-5-hydroxy-3-trifluoromethyl-Δ2-isoxazolines

The reactions of 3,3-dialkyl-2,3-dihydro-6-trifluoromethyl-4-pyrones with hydroxylamine hydrochloride afforded regioisomeric 3(5)-(1,1-dialkyl-2-hydroxyethyl)-5-hydroxy-5(3)-trifluoromethyl-Δ²-isoxazolines depending on the reaction conditions. The title compounds were also prepared from 2,2-dialkyl-5-amino-1-hydroxy-6,6,6-trifluorohex-4-en-3-ones. The above dihydropyrones reacted with hydroxylamine (base) to yield 3-(1,1-dialkyl-2-hydroxyethyl)-5-hydroxy-5-trifluoromethyl-Δ²-isoxazolines. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1334–1339, July, 1999.     

Azocalixarenes. 6: Synthesis, complexation, extraction and thermal behaviour of four new azocalix[4]arenes

Four new azocalix[4]arenes {5,11,17,23-tetrakis[(2-hydroxy-5-tert-butylphenylazo)]-25,26,27,28-tetrahydroxycalix[4]arene (1), 5,11,17,23-tetrakis[(2-hydroxy-5-nitro phenylazo)]-25,26,27,28-tetrahydroxycalix[4]arene (2), 5,11,17,23-tetrakis[(2-amino-5-carboxylphenylazo)]-25,26,27,28-tetrahydroxycalix[4]arene (3) and 5,11,17,23-tetrakis[(1-amino-2-hydroxy-4-sulfonicacidnapthylazo)]-25,26,27,28-tetrahydroxycalix[4]arene (4)} have been synthesized from p-tert-butylphenol, p-nitrophenol, p-aminobenzoic acid and 1-amino-2-hydroxy-4-sulphonic acid by diazo coupling reaction with p-aminocalix[4]arene. The resulting ligands (1–4) were treated with three transition metal salts (e.g., CuCl₂·2H₂O, NiCl₂·6H₂O or CoCl₂·6H₂O). Cu(II), Ni(II) and Co(II) complexes of the azocalix[4]arene derivatives were obtained and characterized by UV-vis, IR, ¹H-NMR spectroscopic techniques and elemental analysis. All the complexes have a metal:ligand ratio of 2:1. The Cu(II) and Ni(II) complexes of azocalix[4]arenes are square-planar, while the Co(II) complexes of azocalix[4]arenes are octahedral with water molecules as axial ligands. The solvent extraction of various transition metal cations from the aqueous phase to the organic phase was carried out by using azocalix[4]arenes (1–4). It was found that, azocalix[4]arenes 1, 2 and 3 examined selectivity for transition metal cations such as Ag⁺, Hg⁺ and Hg²⁺. In addition, the thermal stability of metal:azocalix[4]arene complexes were also reported. Dedicated to Prof. Dr. Mustafa Yılmaz on the occasion of his 50th birthday     

Acylation of 5-amino-3H-1,3,4-thiadiazolin-2-one

Acylation of 5-amino-3H-1,3,4-thiadiazolin-2-one (2) was undertaken selectively at either the 3-NH position or at 5-amino group depending on reaction conditions. The 3-NH is highly acidic and acylation takes place with acid anhydrides at this position in high yields in the presence of pyridine or triethylamine. The diacylation of both the 3-position and the 5-amino group was only possible via the 5-amino-3-acyl-1,3,4-thiadiazolin-2-one intermediates 4 . Under neutral conditions, acylation only occurs at the 5-amino group with acyl chlorides forming 5-acylamino-3H-1,3,4-thiadiazolin-2-ones 5 . 5-Acetylamino-3H-1,3,4-thiadiazolin-2-one can also be synthesized by the thermal transformation of 5-amino-3-acetyl-1,3,4-thiadi-azolin-2-one in acetic acid.     

Synthetic and spectroscopic study of 5-amino-2-acyl-1,2,4-thiadiazolin-3-ones

5-Amino-2-acyl-1,2,4-thiadiazolin-3-ones 2–1 can be synthesized from 5-amino-2H-1,2,4-thiadiazolin-3-one ( 1–1 ) via a selective acylation with an acid anhydride in pyridine. The ¹H nmr spectral characteristics of 5-amino-2-acyl-1,2,4-thiadiazolin-3-ones 2–1 is in particular, compared with 5-amino-2H-1,2,4-thiadiazolin-3-one ( 1–1 ) and 5-amino-2-alkyl-1,2,4-thiadiazolin-3-ones 1–2, 1–3 . The 5-amino group of 2–1 appeared as two peaks in its ¹H nmr spectrum, which merged to a single peak at a higher temperature, while those of compound 1–1, 1–2 and 1–3 appear only as a single peak. The restricted rotation of the C(5)-N(5) (at amino) bond of 5-amino-2-acetyl-1,2,4-thiadiazolin-3-one (2a-1) is about 14.5 Kcal/mol.     

Furylcyclohexenones. 3. Synthesis and properties of 6-acetyl-3(5)-furylcyclohex-2-enones. Molecular and crystal structure of 6-acetyl-3-(2-furyl)-5-phenylcyclohex-2-enone

6-Acetyl-3(5)-furylcyclohex-2-enones were prepared by condensation of furan-containing chalcones with acetylacetone. Acetylcyclohex-2-enones were subjected to C-methylation. Studies by IR and ¹H NMR spectroscopy demonstrated that the resulting compounds occur predominantly in the enol form both in solutions and in the crystalline state. The molecular structure of 6-acetyl-3-(2-furyl)-5-phenylcyclohex-2-enone was established by X-ray diffraction analysis.     

Synthesis and Stereochemistry of (1S,3S,4S,7R11R)-3-(4-Nitrophenyl)-11-aza-2,6-dioxatricyclo[5,3,1,04,11]undecane

The reaction of (1S,2S)-2-amino-1-(4-nitrophenyl)-1,3-propanediol with glutaraldehyde has been studied. It has been established on the basis of AM1 and PM3 calculations and ¹H NMR spectra recorded in the presence of the shift reagent Eu(fod)₃ that (1S,3S,4S,7R,11R)-3-(4-nitrophenyl)-11-aza-2,6-dioxatricyclo[5,3,1,0^4,11]undecane is formed as the result of the reaction.     

Synthesis of certain 1,2,4-triazole nucleoside derivatives

The syntheses of 3-amino-4-methyl-1-(β-D-ribofuranosyl)-1,2,4-triazolin-5-one ( 8a ) and its 2′-deoxy analog 8b as well as 5-amino-2-methyl-1-(β-D-ribofuranosyl)-1,2,4-triazolin-3-one ( 12 ) have been accomplished. Compounds 8a and 8b were synthesized via glycosylation of 3-bromo-5-nitro-1,2,4-triazole which was followed by replacement in three steps of the 3-bromo function to yield 3-nitro-1-(2,3,5-tri-O-acetyl-β-D-ribofuranosyl)-1,2,4-triazolin-5-one ( 4a ) and its 2′-deoxy analog 4b . Compounds 4a and 4b were methylated at N², hydrogenated and deblocked to give 3-amino-4-methyl-1-(β-D-ribofuranosyl)-1,2,4-triazolin-5-one ( 8a ) and the 2′-deoxy analog 8b . Compound 12 was synthesized by glycosylation of 3-amino-1-methyl-1,2,4-triazolin-5(2H)-one ( 10 ). The structures of 8b and 12 were confirmed by single crystal X-ray diffraction analysis.     

Glycosphingolipid with a branched sphingosine base from soft corals from the Andaman Islands

New cerebroside with the structure of 1-(-d-glucopyranosyloxy)-2-N-(2-hydroxyacyl)-erythro-2-amino-9-methyloctadeca-4E,8E-dien-3-ol (1) was isolated from the soft coral Cladiellasp. collected on the seaboard of the Andaman Islands (Indian Ocean). The acyl groups in compound 1 were identified as residues of d-2-hydroxy-C_20:0, -C_21:0, and -C_22:0 acids.     

Synthesis of optically active hydridocarbonyl triosmium clusters with terpene derivatives as ligands. Molecular structure and absolute configuration of a cluster with a bridging dihydroimidazole ligand

Reactions of the triosmium clusters Os₃(CO)₁₁(NCMe) (1) and Os₃(CO)₁₀(NCMe)₂ (2) with terpene derivatives,viz., (1S,3S,4R,6R)-3-(N,N-dimethylamino)-4-amino-3,7,7-trimethylbicyclo [4.1.0]heptane (3). (3bR,4aR)-(3,4,4-trimethyl-3b,4,4a,5-tetrahydrocyclopropa [3,4]cyclopenta[1,2-c]pyrazol-1-yl)acetic acid (4a), and (3bR,4aR)-3-(3,4,4-trimethyl-3b, 4,4a,5-tetrahydrocyclopropa[3,4]cyclopenta[1,2-c]pyrazol-1-yl)propionic acid (4b), were studied. A complex with the terminally coordinated ligand is formed in the first step of the reaction of diamine3 with cluster1. Heating of the resulting complex is accompanied by activation of one of the methyl groups of the ligand to form diastereomers with the bridging tricyclic dihydroimidazole ligand. One of these diastereomers was studied by X-ray diffraction analysis and its absolute configuration was established. Pyrazolycarboxylic acids react with cluster2 as simple organic acids and are coordinated as a bridge at the Os—Os bond through the carboxyl group. Published inIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1447–1454, August, 2000.     

New 1,2,4-triazine-containing podands: synthesis and properties

A method of one-step C-C coupling of 1,5-bis(2,6-dimethylphenoxy)-3-oxapentane (1a) and 1,8-bis(2,6-dimethylphenoxy)-3,6-dioxaoctane (1b) with 3-methylthio- (2) and 3-amino-1,2,4-triazine (3) and 3-aryl-1,2,4-triazin-5-one (6-8) has been described. The reaction of compounds 1a,b with compounds 2 and 3 in the presence of trifluoroacetic acid results in the addition of the dimethylphenoxy group to the unsubstituted C(5) carbon atom of the triazine ring. The reactions of triazinones 6-8 with compounds 1a,b in a mixture of trifluoroacetic acid and organic anhydrides are accompanied by the acylation of the nitrogen atom adjacent to the reaction center and affords bis[(3-R-1-acyl-5-oxo-1,4,5,6-tetrahydro-1,2,4-triazin-6-yl)-2,6-dimethylphenoxy]-3-oxapentane or -3,6-dioxaoctane. The obtained adducts can smoothly be oxidized under mild conditions to form more stable products of nucleophilic hydrogen substitution in the triazine ring. The extraction and transport of Ca²⁺ and Mg²⁺ cations through an organic membrane by the compounds synthesized are discussed.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2210–2215, October, 2004.     

Synthesis and properties of 5-(1,2-dihaloethyl)-2′-deoxyuridines and related analogues

The regiospecific reaction of 5-vinyl-3′,5′-di-O-acetyl-2′-deoxyuridine ( 2 ) with HOX (X = Cl, Br, I) yielded the corresponding 5-(1-hydroxy-2-haloethyl)-3′,5′-di-O-acetyl-2′-deoxyuridines 3a-c . Alternatively, reaction of 2 with iodine monochloride in aqueous acetonitrile also afforded 5-(1-hydroxy-2-iodoethyl)-3′,5′-di-O-acetyl-2′-deoxyuridine ( 3c ). Treatment of 5-(1-hydroxy-2-chloroethyl)- ( 3a ) and 5-(1-hydroxy-2-bromoethyl)-3′,5′-di-O-acetyl-2′-deoxyuridine ( 3b ) with DAST (Et₂NSF₃) in methylene chloride at -40° gave the respective 5-(1-fluoro-2-chloroethyl)- ( 6a , 74%) and 5-(1-fluoro-2-bromoethyl)-3′,5′-di-O-acetyl-2′-deoxyuridine ( 6b , 65%). In contrast, 5-(1-fluoro-2-iodoethyl)-3′,5′-di-O-acetyl-2′-deoxyuridine ( 6e ) could not be isolated due to its facile reaction with methanol, ethanol or water to yield the corresponding 5-(1-methoxy-2-iodoethyl)- ( 6c ), 5-(1-ethoxy-2-iodoethyl)- ( 6d ) and 5-(1-hydroxy-2-iodoethyl)-3′,5′-di-O-acetyl-2′-deoxyuridine ( 3c ). Treatment of 5-(1-hydroxy-2-chloroethyl)- ( 3a ) and 5-(1-hydroxy-2-bromoethyl)-3′,5′-di-O-acetyl-2′-deoxyuridine ( 3b ) with thionyl chloride yielded the respective 5-(1,2-dichloroethyl)- ( 6f , 85%) and 5-(1-chloro-2-bromoethyl)-3′,5′-di-O-acetyl-2′-deoxyuridine ( 6g , 50%), whereas a similar reaction employing the 5-(1-hydroxy-2-iodoethyl)- compound 3c afforded 5-(1-methoxy-2-iodoethyl)-3′,5′-di-O-acetyl-2′-deoxyuridine ( 6c ), possibly via the unstable 5-(1-chloro-2-iodoethyl)-3′,5′-di-O-acetyl-2′-deoxyuridine intermediate 6h . The 5-(1-bromo-2-chloroethyl)- ( 6i ) and 5-(1,2-dibromoethyl)-3′,5′-di-O-acetyl-2′-deoxyuridine ( 6j ) could not be isolated due to their facile conversion to the corresponding 5-(1-ethoxy-2-chloroethyl)- ( 6k ) and 5-(1-ethoxy-2-bromoethyl)-3′,5′-di-O-acetyl-2′-deoxyuridine ( 61 ). Reaction of 5-(1-hydroxy-2-bromoethyl)-3′,5′-di-O-acetyl-2′-deoxyuridine ( 3b ) with methanolic ammonia, to remove the 3′,5′-di-O-acetyl groups, gave 2,3-dihydro-3-hydroxy-5-(2′-deoxy-β-D-ribofuranosyl)-furano[2,3-d]pyrimidine-6(5H)-one ( 8 ). In contrast, a similar reaction of 5-(1-fluoro-2-chloroethyl)-3′,5′-di-O-acetyl-2′-deoxyuridine ( 6a ) yielded (E)-5-(2-chlorovinyl)-2′-deoxyuridine ( 1b , 23%) and 5-(2′-deoxy-β-D-ribofuranosyl)furano[2,3-d]pyrimidin-6(5H)-one ( 9 , 13%). The mechanisms of the substitution and elimination reactions observed for these 5-(1,2-dihaloethyl)-3′,5′-di-O-acetyl-2′-deoxyuridines are described.     

Synthesis of 6-Amino-5-R2-7-(6-R1-4-oxo-3,4-dihydro-2-quinazolyl)-5H-pyrrolo[2,3-b]pyrazine-2,3-dicarbonitriles

It has been found that malonodinitrile and 2-(6-R¹-oxo-3,4-dihydro-2-quinazolyl)acetonitrile in the presence of triethylamine undergo hetarylation by 5,6-dichloro-2,3-pyrazinedicarbonitrile at the active methylene group to give the triethylammonium salt of 2-(3-chloro-5,6-dicyano-2-pyrazinyl)malononitrile or 5-chloro-6-cyano(6-R¹-4-oxo-1,2,3,4-tetrahydro-2-quinazolylidene)methyl-2,3-pyrazinedicarbonitriles. Reaction of these with primary amines leads to annelation of the pyrrole ring at the pyrazine [b] edge to give 6-amino-5-R-5H-pyrrolo[2,3-b]pyrazine-2,3,7-tricarbonitriles and 6-amino-5-R²-7-(6-R¹-4-oxo-3,4-dihydro-2-quinazolyl)-5H-pyrrolo[2,3-b]pyrazine-2,3-dicarbonitriles respectively.     

Synthesis of polyfunctionalized furans from 3-acetyl-1-aryl-2-pentene-1,4-diones

The BF₃-catalyzed cyclization of 3-acetyl-1-aryl-2-pentene-1,4-diones 1a-e in the presence of water in boiling tetrahydrofuran gave bis(3-acetyl-5-aryl-2-furyl)methanes 2a-e in 26-79% yields along with a small amount of 3-acetyl-5-aryl-2-methylfurans 3a-e. The exact structure of 2a was determined by X-ray crystallography. The use of a half volume of the solvent for the reaction of 1a resulted in the formation of 2,4-bis(3-acetyl-5-phenyl-2-furfuryl)-3-acetyl-5-phenylfuran (4) together with 2a and 3a. A similar reaction of 1a was carried out in the presence of 3-acetyl-5-(4-methylphenyl)-2-methylfuran (3d) to afford 4-(3-acetyl-5-phenyl-2-furfuryl)-3-acetyl-5-(4-methylphenyl)-2-methylfuran (5) in 49% yield. The BF₃-catalyzed reaction of 1a with 2,4-pentanedione in dry tetrahydrofuran at 23°C gave 3-(3-acetyl-5-phenyl-2-furfuryl)-4-hydroxy-3-penten-2-one (6a) and 3-(3-acetyl-2-methyl-4-phenyl-5-furyl)-4-hydroxy-3-penten-2-one (7a) in 66 and 24% yields, respectively. The product distribution depended on the reaction temperature. A similar reaction of 1b-e also yielded the corresponding trisubstituted furans 6b-e and tetrasubstituted furans 7b-e in good yields. These results suggested the presence of the furfuryl carbocation intermediate A during the reaction. The one-pot synthesis of 6a and 7a was also achieved by a similar reaction using phenylglyoxal. The deoxygenation of 1a with triphenylphosphine gave 3a in 88% yield, while 1a was treated with concentrated hydrochloric acid to yield 3-acetyl-2-chloromethyl-5-phenylfuran (8) which was quantitatively transformed in ethanol into 3-acetyl-2-ethoxymethyl-5-phenylfuran (9) and in water into 3-acetyl-5-phenylfurfuryl alcohol (10), respectively. In addition, the Diels-Alder reaction of cyclopantadiene with 1a gave the corresponding [4+2] cycloaddition products 11 and 12.     

1,2-Thiazole durch Ringtransformation von 2H-Thiopyran-2-thionen

Summary Aminolyses of 4-dialkylamino-2-methylthiothiopyranes halides with ammonia leads to 4-amino-2-dialkylaminothiopyranylium halides. On treatment with alkali these products are hydrolyzed to N,N-dialkyl-3-amino-2,4-hexadienthioamides, which react with peroxide under oxidative cyclization to 5-dialkylamino-1,2-thiazoles. In order to determine the structures of the unsaturated thioamides and isothiazoles¹³C-NMR-spectroscopic analysis and a single crystal X-ray structure analysis of 5-dimethylamino-3-(2-methyl-1-propenyl)-1,2-thiazole (6 a) at 100K were carried out: C₉H₁₄N₂S,M _r=182.28, monoclinic, P 2₁/a,a=11.622(2),b=6.303 (1),c=13.678(2), =104.49(3)°,V=970.1(3)ų,Z=4,d _x=1.248 g/cm³, =27.0 mm^–1,R=4.93%,R _w=4.84% (1 672 observations, 157 parameters).

Herrn Prof. Dr. G. Zigeuner zum 70. Geburtstag gewidmet