基于酶催化银沉积质量放大的血吸虫压电免疫传感器的研究

发展了一种基于酶催化金属银沉积信号放大的新型高灵敏气相压电免疫传感检测技术.先将血吸虫抗原(SjAg)共价固定在石英晶体表面,制备得到血吸虫压电免疫传感器.检测时,在晶振上滴加不同浓度的待测血吸虫抗体,再将碱性磷酸酶标记的二抗通过夹心方式结合到传感器表面.然后利用碱性磷酸酶催化磷酸化的抗坏血酸酯水解从而还原硝酸银,使金属银沉积在晶振表面上,放大传感器的质量响应信号.实验结果表明该传感检测方法可显著提高气相压电免疫传感器的检测灵敏度,传感器对血吸虫抗体的响应线性范围在1～225 ng/mL,检测下限为1 ng/mL.     

基于酪胺信号放大的新型免疫传感器

将酪胺应用于酶联免疫分析,建立了一种新的高灵敏伏安型免疫传感器。利用纳米金的静电吸咐和己二硫醇、巯基乙胺的自组装,将羊抗人IgG抗体固定到金电极表面上,以辣根过氧化物酶标记羊抗人IgG抗体为酶标抗体,以生物素化酪胺为酶底物,利用催化酪胺沉积反应,在传感界面沉积大量生物素,使原始信号得到几何级数的放大。结果表明,通过生物素化酪胺催化放大后,制得的免疫传感器对H2O2的催化能力增大近20倍,检测hIgG在1.5μg/L～22 mg/L范围内有良好的线性关系,检出限为0.1μg/L。用于实际试样的回收率的测定,结果良好。     

基于网状混合自组装膜的压电免疫传感器及其应用

结合纳米金及混合自组装技术, 制备了一种新型网状混合膜, 提出了一种新的生物分子固定化方法, 研制了一种用于检测人血清抗精子抗体的压电免疫传感器. 首先, 将纳米金溶胶、巯基丙酸和1,6-二巯基己烷按一定的比例混合制得网状混合自组装膜, 然后将此膜组装到压电石英晶振的金电极表面, 经EDC/NHS活化后, 再将抗原固定到电极上, 实现对抗精子抗体的检测. 结果表明, 该方法能明显提高抗体抗原结合效率, 从而提高传感器的灵敏度, 并降低传感界面的非特异性吸附. 将此传感器应用于人血清抗精子抗体的检测, 线性范围为10~800 mU/mL, 检出限为7 mU/mL. 此传感器为抗精子抗体的临床检测提供了新平台.     

基于巯基自组装单层膜技术的补体C3压电免疫传感器的研究

本文采用自组装单层膜(SAMs)技术在压电石英晶振金电极表面组装巯基丙酸SAMs,以盐酸1-乙基-3-(3-二甲基氨基丙基)碳二亚胺(EDC)和N-羟基琥珀酰亚胺(NHS)作偶联剂共价固定补体C3抗体,研制了一种检测人血清中补体C3成分的压电免疫传感器。研究了巯基丙酸的自组装和抗体的固定化条件,考察了晶振固定抗体后的液相振荡行为和检测特性。并利用压电传感装置的实时监测功能,研究了巯基丙酸在金电极表面的自组装成膜过程和补体C3免疫反应动力学,获得了重要的动力学依据和参数。传感器检测补体C3的线性范围为2．34～23．2μg／mL。将传感器用于临床样品的检测,所得结果与酶联免疫吸附法基本一致。     

基于胶体金标记的阳极溶出伏安免疫分析用于免疫球蛋白G的测定

提出了一种基于胶体金标记的阳极溶出伏安免疫分析方法。免疫反应在聚苯乙烯微孔板中以夹心分析模式进行,通过物理吸附将兔抗人免疫球蛋白G(IgG)抗体固定于微孔板上,与相应抗原IgG发生免疫反应后,再通过夹心模式捕获相应的纳米金标记的羊抗人IgG抗体,然后再与金标羊抗人IgG抗体和金标兔抗羊二抗形成的免疫复合物反应,在微孔板上进一步引入大量的纳米金,将金溶解后,在碳糊电极上用阳极溶出伏安法(ASV)对金离子进行检测,溶出峰电流的大小间接与待分析物IgG的浓度成正比。对免疫分析的一些实验条件进行了优化。阳极溶出峰电流与IgG的对数浓度在1.1~1 143 ng/mL范围内呈良好的线性关系,检出限为1 ng/mL。将该方法应用于人血清中IgG浓度的测定,取得了满意结果。     

基于酶催化沉积放大的电化学阻抗法用于人免疫球蛋白M的检测

提出了一种基于酶催化沉积放大的电化学免疫分析方法。先通过免疫夹心反应,将酶标抗体(羊抗人IgM-HRP)固定到电极表面。通过HRP催化双氧水氧化3,3′-二氨基联苯胺在电极表面形成不溶性沉积物,从而放大电化学检测信号。实验通过蛋白A实现抗体的定向固定。考察了包被抗体的浓度和包被溶液的pH对抗体固定的影响,以及酶标抗体的用量和沉积时间对免疫分析的影响。传感器信号响应与人免疫球蛋白M(IgM)浓度在2.1~670μg/L范围内具有良好的线性关系;检出限达0.08μg/L。     

基于巯基自组装单层膜的日本血吸虫石英晶体微天平免疫传感器

应用自组装膜技术在压电石英晶振金电极表面自组装一带羧基的巯基丙酸单层膜,通过盐酸1-乙基-3-(3-二甲基氨基丙基)碳二亚胺及N-羟基琥珀酰亚胺共价固定32KD的日本血吸虫分子抗原(SjAg32),设计了石英晶振微天平免疫传感器,用于测定日本血吸虫抗体.比较了巯基自组装单层膜与HEMA-MMA共聚物涂层修饰的石英晶振在溶液中的振荡行为,发现巯基自组装单层膜修饰的石英晶振稳定快,且稳定性好.在优化条件下,测得IRS(49-2000)的滴度为1:1500.此外,对不同程度血吸虫感染的兔血清进行了测试,结果表明,该传感器能较好地定量区别血吸虫感染程度.     

基于铜增强纳米金标记物结合磁分离的溶出伏安免疫分析法用于蛋白质的高灵敏测定

应用铜原位化学放大纳米金颗粒的信号增强特性, 并结合磁分离技术, 提出了一种高灵敏的溶出伏安免疫分析方法. 实验中以人IgG为模式蛋白质, 将抗体修饰的SiO₂@Fe₃O₄核壳型磁性纳米颗粒和纳米金标抗体悬浊液混合, 用以均相免疫识别人IgG, 借助外加磁场分离纯化, 在免疫复合物悬浊液中加入铜增强试剂进行沉积放大反应, 再将铜用稀硝酸溶解并进行溶出伏安分析检测. 结果表明, 与基于固相反应的金属免疫分析法相比, 所提出的基于均相反应和磁分离原理的方法具有操作简单、分析时间短等优点. 该方法显示出明显增强的人IgG检测性能, 其线性检测范围为01~1000 ng/mL, 检出限为73 pg/mL. 此外, 将其用于实际样品的回收率测定, 结果令人满意.     

金增强多重胶体金标记树枝状复合物放大的电化学免疫分析新方法

报道了一种电化学免疫分析新方法用于痕量(amol/L级)蛋白质的高灵敏检测. 该法采用了两级信号放大策略. 先以金标蛋白A与金标抗体形成的树枝状复合物作为一级信号放大, 随后使用金增强溶液催化捕获在此复合物上的大量的胶体金纳米颗粒的增大以实现二级信号放大. 这种两级信号放大步骤进而结合灵敏的金属溶出伏安分析法以有效增强抗原-抗体免疫反应响应. 实验还通过引入免疫复合物的磁分离操作来降低非特异性吸附的影响. 结果表明, 在优化的实验条件下, 开发的新方法在用于人IgG模型分析物测定时的检测下限可低至5.2 fg•mL^－1或34.7 amol/L (S/N＝3). 这种基于胶体金的金属免疫分析新技术有望用于临床诊断、环境监测、生化防预等诸多领域中目标蛋白质的高灵敏检测.     

微孔板蛋白芯片可视化检测方法的研究

将微孔板生物芯片制备技术与银增强显色方法相结合,建立了一种高通量蛋白免疫分析新方法。研究采用夹心法反应原理,将人IgG捕获抗体以微阵列形式点样于96孔板底部制备成蛋白微阵列,并依次与人IgG、生物素标记二抗及链亲和素胶体金反应,最后用银增强法显色。采用平板式扫描仪对微孔板显色结果进行快速扫描成像,图像采用luxscan 3.0软件处理。结果表明:微孔板蛋白芯片的最低检测量可达0.6 ng/mL,线性范围10 ng/mL~100μg/mL,相关系数为0.98,重复性较好(CV10%)。     

Ultrasensitive potentiometric immunosensor based on SA and OCA techniques for immobilization of HBsAb with colloidal Au and polyvinyl butyral as matrixes

A novel potentiometric immunosensor for detection of hepatitis B surface antigen (HBsAg) has been developed by means of self-assembly (SA) and opposite-charged adsorption (OCA) techniques to immobilize hepatitis B surface antibody (HBsAb) on a platinum electrode. A cleaned platinum electrode was first pretreated in the presence of 10% HNO3 and 2.5% K2CrO4 solution and held at -1.5 V (vs SCE) for 1 min to make it negatively charged and then immersed in a mixing solution containing hepatitis B surface antibody, colloidal gold (Au), and polyvinyl butyral (PVB). Finally, HBsAb was successfully immobilized onto the surface of the negatively charged platinum electrode modified nanosized gold and PVB sol-gel matrixes. The modified procedure was characterized by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The immobilized hepatitis B surface antibody exhibited direct electrochemical behavior toward hepatitis B surface antigen (HBsAg). The performance and factors influencing the performance of the resulting immunosensor were studied in detail. More than 95.7% of the results of the human serum samples obtained by this method were in agreement with those obtained by enzyme-linked immunosorbent assays (ELISAs). The resulting immunosensor exhibited fast potentiometric response (<3 min) to HBsAg. The detection limit of the immunosensor was 2.3 ng.mL(-1), and the linear range was from 8 to 1280 ng.mL(-1). Moreover, the studied immunosensor exhibited high sensitivity, good reproducibility, and long-term stability (>6 months).     

Amperometric Immunosensor Based on L-Cysteine/Gold Colloidal Nanoparticles for Carbofuran Detection

In this study, anti-carbofuran monoclonal antibodies (Ab) were immobilized onto a gold electrode surface modified with multilayers of L-cysteine and gold colloidal nanoparticles (GNPs). Furthermore, horseradish peroxidase (HRP) as enzyme membrane was used for blocking unspecific sites and amplifying signal. The conformational properties of the immunosensor were characterized using electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The concentration of antibody solution, pH of working buffer and incubation time were studied in detail for optimization of analytical performance. Under optimal conditions, the variation of current response was proportional to the concentration of carbofuran which ranged from 0.01 ng/mL to 50 ng/mL with a correlation coefficient of 0.9912. The detection limit was 0.01 ng/mL (S/N = 3). The proposed immunosensor exhibited good reproducibility and stability and it can be used for the rapid detection of carbofuran pesticide.     

Electrochemical immunosensor for carcinoembryonic antigen based on antigen immobilization in gold nanoparticles modified chitosan membrane.

A disposable electrochemical immunosensor for carcinoembryonic antigen (CEA) was proposed based on the antigen immobilized in a colloidal gold nanoparticles modified chitosan membrane on the surface of an indium-tin oxide (ITO) electrode. The different membranes were characterized by scanning electron microscope and electrochemical methods. Based on a competitive immunoassay format, the immobilized antigen of the immunosensor was incubated with a horseradish peroxidase (HRP) labeled antibody and sample CEA antigen, and the formed immunoconjugate in the immunosensor was detected by an o-phenylenediamine-H(2)O(2)-HRP electrochemical system. Under the optimal experimental conditions, the electrocatalytic current decreased linearly with the competitive mechanism. CEA could be determined in the linear range from 2.0 to 20 ng/ml with a detection limit of 1.0 ng/ml. The prepared CEA immunosensor is not only economic due to the low-cost ITO electrode obtained from industrial mass production, but is also capable with good stability and reproducibility for batch fabrication.     

Interdigitated Conductometric Immunosensor for Determination of Interleukin‐6 in Humans Based on Dendrimer G4 and Colloidal Gold Modified Composite Film

A highly sensitive, fast and stable conductometric immunosensor for determination of interleukin‐6 (IL6) in humans is developed by encapsulation of horseradish peroxidase‐labeled interleukin‐6 antibody (HRP‐anti‐IL6) in poly(amidoamine) fourth‐generation dendrimer (dendrimer) and colloidal gold (nanogold) modified composite architecture. The presences of nanogold and dendrimer provided a congenial microenvironment for the immobilized biomolecules and decreased the electron transfer impedance, leading to a direct electrochemical behavior of the immobilized HRP. The formation of the antibody‐antigen complex by a simple one‐step immunoreaction between the immobilized HRP‐anti‐IL6 and IL6 in sample solution introduced a barrier of direct electrical communication between the immobilized HRP and the gold electrode surface, thus local conductivity variations could be detected by the HRP electrocatalytic reaction in 0.02 M phosphate buffer solution (pH 7.0) containing 50 μM H₂O₂, 0.01 M KI and 0.15 M NaC1. Under optimal conditions, the proposed immunosensor exhibited a good conductometric response to IL6 in a linear range from 30 to 300 pg/mL with a relatively low detection limit of 10 pg/mL at 3δ. The precision and reproducibility are acceptable with the intra‐assay CV of 7.3% and 5.6% at 100 and 200 pg/mL IL6, respectively. The storage stability of the proposed immunosensor is acceptable in a pH 7.0 PBS at 4 °C for 8 days. Importantly, the proposed methodology could be extended to the detection of other antigens or biocompounds.     

Amplified inhibition of the electrochemical signal of ferrocene by enzyme-functionalized graphene oxide nanoprobe for ultrasensitive immunoassay

A nanoprobe-induced signal inhibition mechanism was designed for ultrasensitive electrochemical immunoassay at a chitosan-ferrocene (CS-Fc) based immunosensor. The nanoprobe was prepared by covalently loading signal antibody and high-content horseradish peroxidase (HRP) on the graphene oxide (GO) nanocarrier. The immunosensor was prepared through the stepwise assembly of gold nanoparticles (Au NPs) and capture antibody at a CS-Fc modified electrode. After sandwich immunoreaction, the GO-HRP nanoprobes were quantitatively captured onto the immunosensor surface and thus induced the production of a layer of insoluble film through the enzymatically catalytic reaction of the HRP labels. Both the dielectric immunocomplex formed on the immunosensor surface and the enzymatic precipitate with low electroconductivity led to the electrochemical signal decease of the Fc indicator, which was greatly amplified by the multi-enzyme signal amplification of the nanoprobe. Based on this amplified signal inhibition mechanism, a new ultrasensitive electrochemical immunoassay method was developed. Using carcinoembryonic antigen as a model analyte, this method showed a wide linear range over 5 orders of magnitude with a detection limit down to 0.54 pg/mL. Besides, the immunosensor showed good specificity, acceptable reproducibility and stability as well as satisfactory reliability for the serum sample analysis.     

Sandwich-type electrochemiluminescence immunosensor based on N-(aminobutyl)-N-ethylisoluminol labeling and gold nanoparticle amplification

A novel electrochemiluminescence (ECL) sandwich-type immunosensor for human immunoglobulin G (hIgG) on a gold nanoparticle modified electrode was developed by using N-(aminobutyl)-N-ethylisoluminol (ABEI) labeling. The primary antibody, goat-anti-human IgG was first immobilized on a gold nanoparticle modified electrode, then the antigen (human IgG) and the ABEI-labeled second antibody was conjugated successively to form a sandwich-type immunocomplex. ECL was carried out with a double-step potential in carbonate buffer solution (CBS) containing 1.5 mM H₂O₂. The ECL intensity increased linearly with the concentration of hIgG over the range 5.0-100 ng/mL. The limit of detection was 1.68 ng/mL (S/N = 3). The relative standard deviation was 3.79% at 60 ng/mL (n = 9). The present immunosensor is simple and sensitive. It has been successfully applied to the detection of hIgG in human serums.     

Amplified Electrochemical Immunoassay Using HRP Labeled Protein as an Inhibitor to Silver Deposition in the Presence of H2O2

A novel electrochemical immunosensor with amplification effect based on the enzyme inhibition of silver deposition was proposed. In this method, the capture antibody was first immobilized onto a gold electrode via a self-assembled layer. After a sandwich immunoreaction, HRP labeled antibody was bound to the gold electrode. The HRP on the electrode inhibited silver deposition when the electrode was incubated in hydroquinone-H2O2 solution and silver ion solution. The linear sweep voltammetry was chosen to detect the deposited silver and the result showed that the peak current was linearly proportional to the content of IgG in the range of 50 to 2500 ng/mL with a detection limit of 35 ng/mL.     

磁性纳米金共价固定癌胚抗原单克隆抗体的电流型免疫传感器

合成了Fe3O4/Au磁性复合纳米粒子, 在粒子表面通过自组装硫脲分子使表面氨基化, 再用戊二醛共价交联固定癌胚抗原抗体(anti-CEA). 在外加磁场的作用下, 将anti-CEA复合磁性粒子吸附在固体石蜡碳糊电极表面, 制成了新型电流型免疫传感器. 免疫电极在含有癌胚抗原CEA和辣根过氧化物酶标记的癌胚抗原(HRP-CEA)的混合溶液中温育, CEA和HRP-CEA与固定在电极表面的anti-CEA发生竞争反应, 导致HRP对H2O2的催化降解作用的改变, 从而可间接测定CEA. 由于标记的HRP可催化降解H2O2, 导致媒介体间苯二酚浓度改变, 使测定的灵敏度大大提高. 响应电流与CEA质量浓度的对数在2~160 ng/mL的范围内呈线性关系, 检出限为0.57 ng/mL(3σ法). 该免疫传感器具有制作简单、价廉及表面易于更新等特点.     

Improved electrochemical immunosensor for myeloperoxidase in human serum based on nanogold/cerium dioxide-BMIMPF6/L-Cysteine composite film

An electrochemical immunosensing assay for myeloperoxidase (MPO) determination in human serum has been developed. Firstly, L-Cysteine was initially electropolymerized on an Au electrode to form L-Cysteine film. After that cerium dioxide (CeO2) dispersed in 1-butyl-3-methylimidazolium hexafluorophosphate (BMIMPF6) were immobilized on the L-Cysteine film. Then the negatively charged nanogold particles were adsorbed onto the membrane via the positive charge of CeO2, which aimed at assembling more antibody of MPO (anti-MPO). The resulting immunosensor showed a high sensitivity, broad linear response to the MPO concentration comprised between 10 ng/mL and 400 ng/mL with a detection limit of 0.06 ng/mL. Moreover, the surface morphology of the electrode was studied by means of a scanning electron microscope and the electrochemical properties of the fabricated immunosensor were further characterized by cyclic voltammetry. Also, factors influencing the performance of the resulting immunosensors were studied in detail.     

One‐Step Electrochemical Immunoassay for Carcinoembryonic Antigen in Human via Back‐Filling Immobilization of Gold Nanoparticles on DNA‐Modified Gold Electrodes

A new amperometric immunobiosensor for carcinoembryonic antigen (CEA) determination in human serum was developed via encapsulation of horseradish peroxidase‐labeled carcinoembryonic antibody (HRP‐anti‐CEA) in a gold nanoparticles/DNA composite architecture. The presences of gold nanoparticles provided a congenial microenvironment for the immobilized biomolecules and decreased the electron transfer impedance, leading to a direct electrochemical behavior of the immobilized HRP. The formation of the antibody–antigen complex by a simple one‐step immunoreaction between the immobilized HRP‐anti‐CEA and CEA in sample solution introduced a barrier of direct electrical communication between the immobilized HRP and the gold electrode surface. Under optimal conditions, the current change obtained from the labeled HRP relative to H₂O₂ system was proportional to the CEA concentration in two linear ranges from 0.5 to 15 ng/mL and 15 to 300 ng/mL with a detection limit of 0.1 ng/mL (at 3δ). The precision and reproducibility are acceptable with the intraassay CV of 6.3% and 4.7% at 8 and 60 ng/mL CEA, respectively. The storage stability of the proposed immunosensor is acceptable in a pH 7.0 PBS at 4 °C for 9 days. Moreover, the proposed immunosensors were used to analyze CEA in human serum specimens. Analytical results of clinical samples show the developed immunoassay has a promising alternative approach for detecting CEA in the clinical diagnosis.