Charge remote fragmentation in electron capture and electron transfer dissociation

Secondary fragmentations of three synthetic peptides (human αA crystallin peptide 1-11, the deamidated form of human βB2 crystallin peptide 4-14, and amyloid β peptide 25-35) were studied in both electron capture dissociation (ECD) and electron-transfer dissociation (ETD) mode. In ECD, in addition to c and z· ion formations, charge remote fragmentations (CRF) of z· ions were abundant, resulting in internal fragment formation or partial/entire side-chain losses from amino acids, sometimes several residues away from the backbone cleavage site, and to some extent multiple side-chain losses. The internal fragments were observed in peptides with basic residues located in the middle of the sequences, which was different from most tryptic peptides with basic residues located at the C-terminus. These secondary cleavages were initiated by hydrogen abstraction at the α-, β-, or γ-position of the amino acid side chain. In comparison, ETD generates fewer CRF fragments than ECD. This secondary cleavage study will facilitate ECD/ETD spectra interpretation, and help de novo sequencing and database searching.     

Characterization of neurohistone variants and post-translational modifications by electron capture dissociation mass spectrometry

Post-translational modifications (PTMs) of histones are intimately involved in chromatin structure and thus have roles in cellular processes through their impact on gene activation or repression. At the forefront in histone PTM analysis are mass spectrometry-based techniques, which have capabilities to produce improved views of processes affected by chromatin remodeling via histone modifications. In this report, we take the first mass spectrometric look at histone variant expression and post-translational modifications from histones isolated from rat brain tissue. Analyses of whole rat brain identified specific histone H2A and H2B gene family members and several H4 and H3 post-translational modification sites by electron capture dissociation (ECD) mass spectrometry. We subsequently compared these results to selected rat brain regions. Major differences in the expression profiles of H2A and H2B gene family members or in the post-translational modifications on histone H4 were not observed from the different brain regions using a Top Down approach. However, “Middle Down” mass spectrometry facilitating improved characterization of the histone H3 tail (1–50 residues), revealed an enrichment of trimethylation on Lys9 from cerebellum tissue compared to H3 extracted from whole brain, cerebral cortex or hypothalamus tissue. We forward this study in honor of Professor Donald F. Hunt, whose pioneering efforts in protein and PTM analyses have spawned new eras and numerous careers, many exemplified in this special issue.     

Electron capture dissociation mass spectrometry of metallo-supramolecular complexes

The electron capture dissociation (ECD) of metallo-supramolecular dinuclear triple-stranded helicate Fe₂L₃⁴⁺ ions was determined by Fourier transform ion cyclotron resonance mass spectrometry. Initial electron capture by the di-iron(II) triple helicate ions produces dinuclear double-stranded complexes analogous to those seen in solution with the monocationic metal centers Cu^I or Ag^I. The gas-phase fragmentation behavior [ECD, collision-induced dissociation (CID), and infrared multiphoton dissociation (IRMPD)] of the di-iron double-stranded complexes, (i.e., MS³ of the ECD product) was compared with the ECD, CID, and IRMPD of the Cu^I and Ag^I complexes generated from solution. The results suggest that iron-bound dimers may be of the form Fe₂^IL₂²⁺ and that ECD by metallo-complexes allows access, in the gas phase, to oxidation states and coordination chemistry that cannot be accessed in solution.     

Combined infrared multiphoton dissociation and electron capture dissociation with a hollow electron beam in Fourier transform ion cyclotron resonance mass spectrometry

An electron injection system based on an indirectly heated ring-shaped dispenser cathode has been developed and installed in a 7 Tesla Fourier transform ion cyclotron resonance (FTICR) mass spectrometer. This new hardware design allows high-rate electron capture dissociation (ECD) to be carried out by a hollow electron beam coaxial with the ion cyclotron resonance (ICR) trap. Infrared multiphoton dissociation (IRMPD) can also be performed with an on-axis IR-laser beam passing through a hole at the centre of the dispenser cathode. Electron and photon irradiation times of the order of 100 ms are required for efficient ECD and IRMPD, respectively. As ECD and IRMPD generate fragments of different types (mostly c, z and b, y, respectively), complementary structural information that improves the characterization of peptides and proteins by FTICR mass spectrometry can be obtained. The developed technique enables the consecutive or simultaneous use of the ECD and IRMPD methods within a single FTICR experimental sequence and on the same ensemble of trapped ions in multistage tandem (MS/MS/MS or MS(n)) mass spectrometry. Flexible changing between ECD and IRMPD should present advantages for the analysis of protein digests separated by liquid chromatography prior to FTICRMS. Furthermore, ion activation by either electron or laser irradiation prior to, as well as after, dissociation by IRMPD or ECD increases the efficiency of ion fragmentation, including the w-type fragment ion formation, and improves sequencing of peptides with multiple disulfide bridges. The developed instrumental configuration is essential for combined ECD and IRMPD on FTICR mass spectrometers with limited access into the ICR trap.     

Dipole and Coulomb forces in electron capture dissociation and electron transfer dissociation mass spectroscopy

Ab initio electronic structure calculations were performed on a doubly charged polypeptide model H(+)-Lys(Ala)(19)-CO-CH(NH(2))-CH(2)-SS-CH(2)-(NH(2))CH-CO-(Ala)(19)-Lys-H(+) consisting of a C-terminal protonated Lys followed by a 19-Ala α-helix with a 20th Ala-like unit whose side chain is linked by a disulfide bond to a corresponding Ala-like unit connected to a second 19-Ala α-helix terminated by a second C-terminal-protonated Lys. The Coulomb potentials arising from the two charged Lys residues and dipole potentials arising from the two oppositely directed 72 D dipoles of the α-helices act to stabilize the SS bond's σ* orbital. The Coulomb potentials provide stabilization of 1 eV, while the two large dipoles generate an additional 4 eV. Such stabilization allows the SS σ* orbital to attach an electron and thereby generate disulfide bond cleavage products. Although calculations are performed only on SS bond cleavage, discussion of N-C(α) bond cleavage caused by electron attachment to amide π* orbitals is also presented. The magnitudes of the stabilization energies as well as the fact that they arise from Coulomb and dipole potentials are supported by results on a small model system consisting of a H(3)C-SS-CH(3) molecule with positive and negative fractional point charges to its left and right designed to represent (i) two positive charges ca. 32 ? distant (i.e., the two charged Lys sites of the peptide model) and (ii) two 72 D dipoles (i.e., the two α-helices). Earlier workers suggested that internal dipole forces in polypeptides could act to guide incoming free electrons (i.e., in electron capture dissociation (ECD)) toward the positive end of the dipole and thus affect the branching ratios for cleaving various bonds. Those workers argued that, because of the huge mass difference between an anion donor and a free electron, internal dipole forces would have a far smaller influence over the trajectory of a donor (i.e., in electron transfer dissociation (ETD)). The present findings suggest that, in addition to their effects on guiding electron or donor trajectories, dipole potentials (in combination with Coulomb potentials) also alter the energies of SS σ* and amide π* orbitals, which then affects the ability of these orbitals to bind an electron. Thus, both by trajectory-guiding and by orbital energy stabilization, Coulomb and dipole potentials can have significant influences on the branching ratios of ECD and ETC in which disulfide or N-C(α) bonds are cleaved.     

Electron capture dissociation mass spectrometry of tyrosine nitrated peptides

In vivo protein nitration is associated with many disease conditions that involve oxidative stress and inflammatory response. The modification involves addition of a nitro group at the position ortho to the phenol group of tyrosine to give 3-nitrotyrosine. To understand the mechanisms and consequences of protein nitration, it is necessary to develop methods for identification of nitrotyrosine-containing proteins and localization of the sites of modification. Here, we have investigated the electron capture dissociation (ECD) and collision-induced dissociation (CID) behavior of 3-nitrotyrosine-containing peptides. The presence of nitration did not affect the CID behavior of the peptides. For the doubly-charged peptides, addition of nitration severely inhibited the production of ECD sequence fragments. However, ECD of the triply-charged nitrated peptides resulted in some singly-charged sequence fragments. ECD of the nitrated peptides is characterized by multiple losses of small neutral species including hydroxyl radicals, water and ammonia. The origin of the neutral losses has been investigated by use of activated ion (AI) ECD. Loss of ammonia appears to be the result of non-covalent interactions between the nitro group and protonated lysine side-chains.     

Evaluation and optimization of electron capture dissociation efficiency in fourier transform ion cyclotron resonance mass spectrometry

Electron capture dissociation (ECD) efficiency has typically been lower than for other dissociation techniques. Here we characterize experimental factors that limit ECD and seek to improve its efficiency. Efficiency of precursor to product ion conversion was measured for a range of peptide (∼15% efficiency) and protein (∼33% efficiency) ions of differing sizes and charge states. Conversion of precursor ions to products depends on electron irradiation period and maximizes at ∼5–30 ms. The optimal irradiation period scales inversely with charge state. We demonstrate that reflection of electrons through the ICR cell is more efficient and robust than a single pass, because electrons can cool to the optimal energy for capture, which allows for a wide range of initial electron energy. Further, efficient ECD with reflected electrons requires only a short (∼500 μs) irradiation period followed by an appropriate delay for cooling and interaction. Reflection of the electron beam results in electrons trapped in or near the ICR cell and thus requires a brief (∼50 μs) purge for successful mass spectral acquisition. Further electron irradiation of refractory precursor ions did not result in further dissociation. Possibly the ion cloud and electron beam are misaligned radially, or the electron beam diameter may be smaller than that of the ion cloud such that remaining precursor ions do not overlap with the electron beam. Several ion manipulation techniques and use of a large, movable dispenser cathode reduce the possibility that misalignment of the ion and electron beams limits ECD efficiency.     

Kinetic intermediates in the folding of gaseous protein ions characterized by electron capture dissociation mass spectrometry

Alternative mechanisms propose that protein folding in solution proceeds either through specific obligate intermediates or by a multiplicity of routes in a "folding funnel". These questions are examined in the gas phase by using a new method that provides details of the noncovalent binding of solvent-free protein ions. Capture of an electron by a multiply charged cation causes immediate dissociation (ECD) of a backbone bond, but with negligible excitation of noncovalent bonds; thus ECD of a linear protein ion produces two measurable fragment ions only if these are not held together by noncovalent bonds. Thermal unfolding of 9+ ions of cytochrome c proceeds through the separate unfolding of up to 13 backbone regions (represented by 44 bond cleavages) with melting temperatures of <26 to 140 degrees C. An 0.25 s laser IR pulse induces unfolding of 9+ ions in <4 s in six of these regions, followed by their refolding in 2 min. However, for the 15+ ions a laser IR pulse causes slower unfolding through poorly defined intermediates that leads to far more ECD products (63% increase in bond cleavages) after 1 min, even more than heating to 140 degrees C, with refolding to a more compact conformation in 10 min. Random isomerization appears to produce a dynamic mixture of conformers that folds through a variety of pathways to the most stable conformer(s), consistent with a "folding funnel"; this might also be considered as an extension of the classical view to a system with a far smaller free energy change yielding multiple conformers. As cautions to inferring solution conformational structure from gas-phase data, no structural relationship between these gaseous folding intermediates and those in solution is apparent, consistent with reduced hydrophobic bonding and increased electrostatic repulsion. Further, equilibrium folding of gaseous ions can require minutes, and even momentary unfolding of an intermolecular complex during this time can be irreversible.     

Top down characterization of secreted proteins from Mycobacterium tuberculosis by electron capture dissociation mass spectrometry

Secreted proteins of Mycobacterium tuberculosis are implicated in its disease pathogenesis and so are considered as potential diagnostic and vaccine candidates. The search for these has been slow, even though the entire genome sequence of M. tuberculosis is now available; of the 620 protein spots resolved by 2-D gel electrophoresis, 114 secreted proteins have been identified, but for only 13 has the primary structure been partly characterized. For comparison, in this top down mass spectrometry (MS) approach the secreted proteins were precipitated from cell culture filtrate, resuspended, and examined directly by electrospray ionization (ESI) Fourier transform MS. The ESI spectra of three precipitates showed 93, 535, and 369 molecular weight (M(r)) values, for a total of 689 different values. However, only approximately 10% of these values matched (+/-1 Da) the DNA predicted M(r) values, but these identifications were unreliable. Of nine molecular ions characterized by MS/MS, only one protein match was confirmed, and its isotopic molecular ions were overlapped by those of another protein. MS/MS identified a total of ten proteins by sequence tag search, of which three were unidentified previously. The low success of M(r) matching was due to unusually extensive posttranslational modifications, including loss of a signal sequence, loss of the N-terminal residue, proteolytic degradation, oxidation, and glycosylation. Although in eubacteria the latter is relatively rare, a 9 kDa protein showed 7 hexose attachments and two 20 kDa proteins each had 20 attachments. For MS/MS, electron capture dissociation was especially effective.     

Negative-ion electron capture dissociation: radical-driven fragmentation of charge-increased gaseous peptide anions

The generation of gaseous polyanions with a Coulomb barrier has attracted attention as exemplified by previous studies of fullerene dianions. However, this phenomenon has not been reported for biological anions. By contrast, electron attachment to multiply charged peptide and protein cations has seen a surge of interest due to the high utility for tandem mass spectrometry (MS/MS). Electron capture dissociation (ECD) and electron transfer dissociation (ETD) involve radical-driven fragmentation of charge-reduced peptide/protein cations to yield N-C(α) backbone bond cleavage, resulting in predictable c'/z(?)-type product ions without loss of labile post-translational modifications (PTMs). However, acidic peptides, e.g., with biologically important PTMs such as phosphorylation and sulfonation, are difficult to multiply charge in positive ion mode and show improved ionization in negative-ion mode. We found that peptide anions ([M - nH](n-), n ≥ 1) can capture electrons within a rather narrow energy range (~3.5-6.5 eV), resulting in charge-increased radical intermediates that undergo dissociation analogous to that in ECD/ETD. Gas-phase zwitterionic structures appear to play an important role in this novel MS/MS technique, negative-ion electron capture dissociation (niECD).     

Improved low-energy electron injection systems for high rate electron capture dissociation in Fourier transform ion cyclotron resonance mass spectrometry

New low-energy electron injection systems based on indirectly heated dispenser cathodes facilitate electron capture dissociation (ECD) in Fourier transform ion cyclotron resonance (FTICR) mass spectrometry. In this joint report, details are presented of the design and performance of these systems on two commercial FTICR instruments, 9.4 T Bruker BioAPEX in Uppsala and 4.7 T IonSpec Ultima in Odense. New results include obtaining meaningful one-scan MS/MS data for isolated precursor ions with millisecond irradiation times. The ECD rate improvement is not only due to the larger total electron current, but the larger emitting area as well.     

Peptide and protein characterization by high-rate electron capture dissociation Fourier transform ion cyclotron resonance mass spectrometry

The analytical utility of the electron capture dissociation (ECD) technique, developed by McLafferty and co-workers, has substantially improved peptide and protein characterization using Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS). The limitations of the first ECD implementations on commercial instruments were eliminated by the employment of low-energy electron-injection systems based on indirectly heated dispenser cathodes. In particular, the ECD rate and reliability were greatly increased, enabling the combination of ECD/FTICR-MS with on-line liquid separation techniques. Further technique development allowed the combination of two rapid fragmentation techniques, high-rate ECD and infrared multiphoton dissociation (IRMPD), in a single experimental configuration. Simultaneous and consecutive irradiations of trapped ions with electrons and photons extended the possibilities for ion activation/dissociation and led to improved peptide and protein characterization. The application of high-rate ECD/FTICR-MS has demonstrated its power and unique capabilities in top-down sequencing of peptides and proteins, including characterization of post-translational modifications, improved sequencing of peptides with multiple disulfide bridges and secondary fragmentation (w-ion formation). Analysis of peptide mixtures has been accomplished using high-rate ECD in bottom-up mass spectrometry based on mixture separation by liquid chromatography and capillary electrophoresis. This paper summarizes the current impact of high-rate ECD/FTICR-MS for top-down and bottom-up mass spectrometry of peptides and proteins.     

Top down characterization of larger proteins (45 kDa) by electron capture dissociation mass spectrometry.

The structural characterization of proteins expressed from the genome is a major problem in proteomics. The solution to this problem requires the separation of the protein of interest from a complex mixture, the identification of its DNA-predicted sequence, and the characterization of sequencing errors and posttranslational modifications. For this, the "top down" mass spectrometry (MS) approach, extended by the greatly increased protein fragmentation from electron capture dissociation (ECD), has been applied to characterize proteins involved in the biosynthesis of thiamin, Coenzyme A, and the hydroxylation of proline residues in proteins. With Fourier transform (FT) MS, electrospray ionization (ESI) of a complex mixture from an E. coli cell extract gave 102 accurate molecular weight values (2-30 kDa), but none corresponding to the predicted masses of the four desired enzymes for thiamin biosynthesis (GoxB, ThiS, ThiG, and ThiF). MS/MS of one ion species (representing approximately 1% of the mixture) identified it with the DNA-predicted sequence of ThiS, although the predicted and measured molecular weights were different. Further purification yielded a 2-component mixture whose ECD spectrum characterized both proteins simultaneously as ThiS and ThiG, showing an additional N-terminal Met on the 8 kDa ThiS and removal of an N-terminal Met and Ser from the 27 kDa ThiG. For a second system, the molecular weight of the 45 kDa phosphopantothenoylcysteine synthetase/decarboxylase (CoaBC), an enzyme involved in Coenzyme A biosynthesis, was 131 Da lower than that of the DNA prediction; the ECD spectrum showed that this is due to the removal of the N-terminal Met. For a third system, viral prolyl 4-hydroxylase (26 kDa), ECD showed that multiple molecular ions (+98, +178, etc.) are due to phosphate noncovalent adducts, and MS/MS pinpointed the overall mass discrepancy of 135 Da to removal of the initiation Met (131 Da) and to formation of disulfide bonds (2 x 2 Da) at C32-C49 and C143-C147, although 10 S-S positions were possible. In contrast, "bottom up" proteolysis characterization of the CoaBC and the P4H proteins was relatively unsuccessful. The addition of ECD substantially increases the capabilities of top down FTMS for the detailed structural characterization of large proteins.     

Site-specific amide hydrogen exchange in melittin probed by electron capture dissociation Fourier transform ion cyclotron resonance mass spectrometry

Electron capture dissociation (ECD) has been proposed to be a non-ergodic process, i.e. to provide backbone dissociation of gas-phase peptides faster than randomization of the imparted energy. One potential consequence could be that ECD can fragment deuterated peptides without causing hydrogen scrambling and thereby provide amino acid residue-specific amide hydrogen exchange rates. Such a feature would improve the resolution of approaches involving solution-phase amide hydrogen exchange combined with mass spectrometry for protein structural characterization. Here, we explore this hypothesis using melittin, a haemolytic polypeptide from bee venom, as our model system. Exchange rates in methanol calculated from consecutive c-type ion pairs show some correlation with previous NMR data: the amide hydrogens of leucine 13 and alanine 15, located at the unstructured kink surrounding proline 14 in the melittin structure adopted in methanol, appear as fast exchangers and the amide hydrogens of leucine 16 and lysine 23, buried within the helical regions of melittin, appear as slow exchangers. However, calculations based on c-type ions for other amide hydrogens do not correlate well with NMR data, and evidence for deuterium scrambling in ECD was obtained from z*-type ions.     

Solution-phase deuterium/hydrogen exchange at a specific residue using nozzle-skimmer and electron capture dissociation mass spectrometry

Information about protein conformation can be obtained with hydrogen/deuterium exchange (HDX) mass spectrometry. The isotopic solution-phase exchange of specific amide hydrogen atoms can be followed using low-vacuum nozzle-skimmer collision-induced dissociation (CID). In this study, the nozzle-skimmer technique was complemented by electron capture dissociation (ECD) Fourier transform ion cyclotron resonance mass spectrometry (FTICRMS). The solution-phase exchange at a specific residue is monitored by comparing isotopic distributions of two consecutive b- or c-type ions. While nozzle-skimmer fragmentation takes place in the low-vacuum region of the mass spectrometer, ECD occurs at ultra-high vacuum within the mass analyzer cell of the FTICR mass spectrometer. The dissociations take place at 10(-4) and 10(-9) mbar, respectively. Low-vacuum nozzle-skimmer fragmentation can result in intramolecular exchange between product ions and solvent molecules in the gas phase. Consequently, the solution-phase information about protein or peptide conformation is lost. It was not possible to monitor isotopic solution-phase exchange at the eighth residue in substance P, (Phe)8, with nozzle-skimmer CID. By using the in-cell ECD fragmentation method, the solution-phase exchange at the (Phe)8 residue was preserved during mass spectrometric analysis. This result shows the complementary aspects of applying fragmentation at low and at high vacuum, when studying isotopic exchange in solution at specific residues using FTICRMS.     

Quantitating the relative abundance of isoaspartyl residues in deamidated proteins by electron capture dissociation

Relative quantitation of aspartyl and isoaspartyl residue mixtures from asparagine deamidation is demonstrated using electron capture dissociation without prior HPLC separation. The method utilizes the linear relationship found between the relative abundance of the isoaspartyl diagnostic ion, z(n)-57, and % isoaspartyl content based on the ECD spectra of known isoaspartyl/aspartyl mixtures of synthetic peptides. The observed linearity appears to be sequence independent because the relationship exists despite sequence variations and changes in backbone fragment abundances when isoaspartyl and aspartyl residues are interchanged. Furthermore, a new method to calculate the relative abundances of isomer from protein deamidation without synthetic peptides is proposed and tested using a linear peptide released by protein digestion that contains the deamidation site. The proteolytic peptide can be rapidly aged to the expected 3:1 (isoaspartyl:aspartyl) mixture to generate a two-point calibration standard for ECD analysis. The procedure can then be used to determine the relative abundance of deamidation products from in vivo or in vitro protein aging experiments.     

Electron capture dissociation Fourier transform ion cyclotron resonance mass spectrometry in the electron energy range 0-50 eV

Electron capture dissociation (ECD) of polypeptide cations was obtained with pencil and hollow electron beams for both sidekick and gas-assisted dynamic ion trapping (GADT) using Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) with an electrostatic ion transfer line. Increasing the number of trapped ions by multiple ICR trap loads using GADT improved the ECD sensitivity in comparison with sidekick ion trapping and ECD efficiency in comparison with single ion trap load by GADT. Furthermore, enhanced sensitivity made it possible to observe ECD in a wide range of electron energies (0-50 eV). The degree, rate and fragmentation characteristics of ECD FTICR-MS were investigated as functions of electron energy, electron irradiation time, electron flux and ion trapping parameters for this broad energy range. The results obtained show that the rate of ECD is higher for more energetic (>1 eV) electrons. Long electron irradiation time with energetic electrons reduces average fragment ion mass and decreases efficiency of formation of c- and z-type ions. The obtained dependencies suggest that the average fragment ion mass and the ECD efficiency are functions of the total fluence of the electron beam (electron energy multiplied by irradiation time). The measured electron energy distributions in low-energy ECD and hot ECD regimes are about 1 eV at full width half maximum in employed experimental configurations.     

Electron capture dissociation implementation progress in fourier transform ion cyclotron resonance mass spectrometry

Successful electron capture dissociation (ECD) Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) applications to peptide and protein structural analysis have been enabled by constant progress in implementation of improved electron injection techniques. The rate of ECD product ion formation has been increased to match the liquid chromatography and capillary electrophoresis timescales, and ECD has been combined with infrared multiphoton dissociation in a single experimental configuration to provide simultaneous irradiation, fast switching between the two techniques, and good spatial overlap between ion, photon, and electron beams. Here we begin by describing advantages and disadvantages of the various existing electron injection techniques for ECD in FT-ICR MS. We next compare multiple-pass and single-pass ECD to provide better understanding of ECD efficiency at low and high negative cathode potentials. We introduce compressed hollow electron beam injection to optimize the overlap of ion, photon, and electron beams in the ICR ion trap. Finally, to overcome significant outgassing during operation of a powerful thermal cathode, we introduce nonthermal electron emitter-based electron injection. We describe the first results obtained with cold cathode ECD, and demonstrate a general way to obtain low-energy electrons in FT-ICR MS by use of multiple-pass ECD.     

Liquid chromatography electron capture dissociation tandem mass spectrometry (LC-ECD-MS/MS) versus liquid chromatography collision-induced dissociation tandem mass spectrometry (LC-CID-MS/MS) for the identification of proteins

Electron capture dissociation (ECD) offers many advantages over the more traditional fragmentation techniques for the analysis of peptides and proteins, although the question remains: How suitable is ECD for incorporation within proteomic strategies for the identification of proteins? Here, we compare LC-ECD-MS/MS and LC-CID-MS/MS as techniques for the identification of proteins. Experiments were performed on a hybrid linear ion trap-Fourier transform ion cyclotron resonance mass spectrometer. Replicate analyses of a six-protein (bovine serum albumin, apo-transferrin, lysozyme, cytochrome c, alcohol dehydrogenase, and β-galactosidase) tryptic digest were performed and the results analyzed on the basis of overall protein sequence coverage and sequence tag lengths within individual peptides. The results show that although protein coverage was lower for LC-ECD-MS/MS than for LC-CID-MS/MS, LC-ECD-MS/MS resulted in longer peptide sequence tags, providing greater confidence in protein assignment.