AFM observations of phase transitions in molecularly thin films of a three-ring bent-core compound

Submonolayer thin films of a three-ring bent-core (or banana-shaped) compound, m-bis(4-n-octyloxystyryl)benzene (m-OSB), were vacuum-deposited on a mica surface, and a spontaneous transition from monolayer films to bilayer crystals was observed at room temperature, which was ascribed to the specific molecular shape and polar layered packing of the bent-core molecules [Tang et al. J. Phys. Chem. B 2004, 108 (34), 12921-12926]. The crystal nucleation and growth from the monolayer films as well as the melting phase transition from the bilayer crystals were investigated using atomic force microscopy (AFM). It was shown that after initial nucleation, the crystal growth was achieved through three pathways: direct absorption of molecules from monolayer films, molecular cluster diffusion, and quasi-Ostwald ripening. When annealing the bilayer crystals at elevated temperatures, morphological change from a bilayer to a monolayer was observed, and some new islands with fingerlike patterns were formed during this process, which resulted from a diffusion-controlled growth of the molten molecules. In general, the high-resolution AFM in combination with the molecularly thin m-OSB films provided us with direct visualization of nucleation, crystal growth, melting, and film morphology evolution on the mesoscopic scale, which are of fundamental interest from the theoretical viewpoint and are of central importance for the control of interfacial properties in practical applications.     

L-半胱氨酸自组装膜诱导草酸钙结晶研究

在CaCl2.H2O和Na2C2O4配制的过饱和溶液中,利用L-半胱氨酸(L-Cys)在金片上形成的自组装膜为模板,研究了草酸钙(CaOxa)在自组装膜上的结晶行为,并探讨了溶液pH对CaOxa晶体组成、晶型及其形貌的影响。采用X射线衍射(XRD)和扫描电子显微镜(SEM)等技术对CaOxa晶体的结构和形貌进行了表征。实验结果表明:当溶液pH=3.0时,溶液中可以形成一水草酸钙(CaC2O4.H2O,COM)和二水草酸钙(CaC2O4.2H2O,COD)晶体,而在同样pH条件下,在L-Cys自组装膜上只形成COD晶体,表明自组装单层对CaOxa晶体的成核和生长有重要影响。通过改变溶液的pH,在自组装单层上可以得到不同晶型和不同形状的CaOxa晶体。当pH=3.0时得到四方块状的COD晶体,而pH=5.0和pH=7.0时分别得到六边形和拉长六边形的COM晶体。     

亚相pH值对磷脂单层下甘氨酸结晶过程的影响

亚相pH值对磷脂单层下甘氨酸结晶过程的影响;Langmuir单分子层; 结晶; 取向; 形貌     

Molecular organization in binary mixtures of derivatives of naphthalenebicarboxylic acid and naphthoylenebenzimidazole with a liquid crystal in two-dimensional layers

Langmuir films of some dichroic dyes, namely derivatives of naphthalenebicarboxylic acid and derivatives of naphthoylenebenzimidazole, as well as of their mixtures with the liquid crystals 4-octyl-4'-cyanobiphenyl (8CB) and 4-pentyl-4'-cyano-p-terphenyl (5CT) were prepared. Surface pressure/mean molecular area isotherms were recorded from which some information about the alignment of molecules in a monomolecular layer at an air-water interface could be deduced. It was found that the properties of the monolayer are highly sensitive to the molecular structure of the side groups substituted on the main skeleton of the dye molecule, and to the mixture composition. Moreover, information about the miscibility or the phase separation of the two components in Langmuir films formed from dye/liquid crystal mixtures was obtained by using the excess area criterion and surface pressure rules.     

Molecular organization in binary mixtures of derivatives of naphthalenebicarboxylic acid and naphthoylenebenzimidazole with a liquid crystal in two-dimensional layers

Langmuir films of some dichroic dyes, namely derivatives of naphthalenebicarboxylic acid and derivatives of naphthoylenebenzimidazole, as well as of their mixtures with the liquid crystals 4-octyl-4′-cyanobiphenyl (8CB) and 4-pentyl-4″-cyano-p-terphenyl (5CT) were prepared. Surface pressure/mean molecular area isotherms were recorded from which some information about the alignment of molecules in a monomolecular layer at an air–water interface could be deduced. It was found that the properties of the monolayer are highly sensitive to the molecular structure of the side groups substituted on the main skeleton of the dye molecule, and to the mixture composition. Moreover, information about the miscibility or the phase separation of the two components in Langmuir films formed from dye/liquid crystal mixtures was obtained by using the excess area criterion and surface pressure rules.     

On the stability of Langmuir films of pyramidic mesogens

Pyramidic mesogens forming thermotropic liquid crystal bulk phases were spread in an air-water interface. Pressure surface measurements and polarizing microscopy on the Langmuir films were used to characterize the various states of these pyramidic-like molecules. For two compounds bearing short lateral aliphatic chains, the surface pressure isotherms exhibit a large plateau region corresponding to a metastable monolayer in which the molecules may adopt an 'edge-on' arrangement. The coexistence of multilayered, anisotropic, slowly growing domains with the monolayer in the plateau region has been observed at long time scale. The film area relaxation kinetics at constant surface pressure show the existence of two nucleation mechanisms for the formation of these domains.     

Molar mass dependent growth of poly(epsilon-caprolactone) crystals in Langmuir films

Poly(epsilon-caprolactone) (PCL) samples with number average molar masses (Mn) ranging from 3.5 to 36 kg.mol-1 exhibit molar mass dependent nucleation and growth of crystals, crystal morphologies, and melting properties at a temperature of 22.5 degrees C in Langmuir films at the air/water (A/W) interface. At surface area per monomer, A, greater than approximately 0.37 nm2.monomer-1, surface pressure, Pi, and surface elasticity exhibit molar mass independent behavior that is consistent with a semidilute PCL monolayer. In this regime, the scaling exponent indicates that the A/W interface is a good solvent for the liquid-expanded PCL monolayers. Pi-A isotherms show molar mass dependent behavior in the vicinity of the collapse transition, i.e., the supersaturated monolayer state, corresponding to the onset of the nucleation of crystals. Molar mass dependent morphological features for PCL crystals and their subsequent crystal melting are studied by in situ Brewster angle microscopy during hysteresis experiments. The competition between lower segmental mobility and a greater degree of undercooling with increasing molar mass produces a maximum average growth rate at intermediate molar mass. This behavior is analogous to spherulitic growth in bulk PCL melts. The plateau regions in the expansion isotherms represent the melting process, where the polymer chains continuously return to the monolayer state. The magnitude of Pi for the plateau during expansion decreases with increasing molar mass, indicating that the melting process is strongly molar mass dependent.     

Water-soluble terpolymer-mediated calcium carbonate crystal modification

The structure of the polymeric substrate plays an important role in the nucleation of calcium carbonate crystals. In this study a synthetic water-soluble poly(acrylamide-co-2-acrylamido-2-methyl-1-propane sodium sufonate-co-n-vinyl pyrrolidone) was found to be a substrate favoring the nucleation of polymorphs of calcium carbonate crystals under specific experimental conditions. Morphological characterization of the polymorphs was done using atomic force microscopy, scanning electron microscopy, energy dispersive spectroscopy, FTIR analysis, and X-ray diffraction. If calcium carbonate is precipitated in the presence of terpolymer, a remarkable increase in nucleation density (number of crystals per unit area) was observed. Stacked crystals of rhombohedral morphology that formed may be due to the presence of sodium sulfonate groups on the terpolymer. However, in the presence of poly-L-aspartic acid, almost all crystals are hollow and have needlelike or plate like morphology was formed. This change in calcium carbonate morphology can be explained by the variation of the polymer conformation, if poly- L-aspartic acid is present.     

磷脂酰胆碱LB单分子膜诱导下KDP晶体取向生长的研究

有机超薄膜诱导晶体生长是在化学、物理与生物多门学科相互交融的基础上发展起来的新兴学科 ,并逐渐成为仿生合成的重要分支 [1] .目前的研究重点主要集中于以有机化合物 LB膜作为模板剂诱导生物矿化材料上 [2～ 5] .磷脂 LB膜是生物膜的简化模型体系 [6 ] ,用它作模板剂将使该领域的研究进一步接近生物体系 .对晶体而言 ,修饰晶体材料的特征对于改善和测定材料的光学性能至关重要 [2 ] ,但目前有关上述领域的研究几乎均是空白 .KH2 PO4 ( KDP)晶体是性能优良的非线性光学材料 [7] ,本文首次以磷脂分子 LB膜作为模板剂诱导 KDP的晶化…     

A Chiral Self‐Assembled Monolayer Derived from a Resolving Agent and its Performance as a Crystallization Template for an Organic Compound from Organic Solvents

A new chiral nonracemic thiol derived from a popular acidic resolving agent that incorporates a cyclic disubstituted phosphate group (phencyphos) has been prepared in enantiomerically pure form. The stereochemistry and absolute configuration were established by performing a single‐crystal X‐ray structural analysis of a synthetic intermediate. The thiol compound was used for the preparation of self‐assembled monolayers (SAMs) on both monocrystalline and polycrystalline metallic gold, which have very different surface roughness. The monolayers were used to promote the nucleation and growth of crystals from nonaqueous solutions of an organic molecule (the parent phencyphos) of similar structure to the compound present in the monolayer. The template layers influence the nucleation and growth of the phencyphos crystals despite the lack of two‐dimensional order in the surfaces. Heterogeneous nucleation of phencyphos takes place upon evaporation of either CHCl₃ or isopropanol solutions of the compound on the SAM surfaces, where the evaporation rate merely influences the size and homogeneity of the crystals. The roughness of the surface also plays an important role; the polycrystalline gold produces more homogeneous samples because of the greater number of nucleation sites. Clear evidence for nucleation and growth on the surfaces is shown by scanning electron microscopy. The variation in crystal form achieved by using different surfaces and solvents suggests that the layers are applicable for the preparation of organic crystals from organic solutions.     

单分子膜诱导生物矿物晶体生长中的晶格匹配和电荷匹配

有机基质与无机晶体的晶格几何匹配和静电相互作用是导致生物体内矿物有序生长并具有特殊理化性质的重要因素,但有机基质的作用机理至今没有完全弄清.作为模拟生物矿化的重要模板之一,Langmuir单分子膜具有独特的优势.本文综述了单分子膜诱导下生物矿物碳酸钙(文石、方解石和球霰石)、羟磷灰石、硫酸钡和纤铁矿等生长过程中的晶格匹配和电荷匹配,讨论了单分子膜亲水头基、膜的电荷性质、膜聚集态等因素对膜控晶体生长过程中晶格匹配和电荷匹配的影响,指出了该领域所面临的问题和将来的发展方向.     

On the stability of Langmuir films of pyramidic mesogens

Abstract

Pyramidic mesogens forming thermotropic liquid crystal bulk phases were spread in an air-water interface. Pressure surface measurements and polarizing microscopy on the Langmuir films were used to characterize the various states of these pyramidic-like molecules. For two compounds bearing short lateral aliphatic chains, the surface pressure isotherms exhibit a large plateau region corresponding to a metastable monolayer in which the molecules may adopt an ‘edge-on’ arrangement. The coexistence of multilayered, anisotropic, slowly growing domains with the monolayer in the plateau region has been observed at long time scale. The film area relaxation kinetics at constant surface pressure show the existence of two nucleation mechanisms for the formation of these domains.     

Peanut-shaped aggregation of CaCO<Subscript>3</Subscript> crystallites in the presence of an amphiphilic derivative of carboxymethylchitosan

An amphiphilic derivative of carboxymethylchitosan (CMCS), (2-hydroxyl-3-butoxyl)propyl-CMCS (HBP-CMCS), was used as an organic additive in the precipitation process of calcium carbonate (CaCO₃). HBP-CMCS molecules can interact with calcium ions, the functional groups of which act as active sites for the nucleation and crystallization of CaCO₃. Simultaneously, HBP-CMCS molecule also functionalizes as a colloidal stabilizer to prohibit the sedimentation of the grown CaCO₃ crystals, depending upon the molar ratio of the initial Ca²⁺ ions to the repeat units of HBP-CMCS molecules. The combination investigations of scanning electron microscopy, X-ray diffraction, and Fourier transform infrared spectroscopy on the precipitated CaCO₃ crystals proved that concentrations of HBP-CMCS and Ca²⁺ exert great influence on the crystallization habit of CaCO₃, such as the nucleation, growth, morphology, crystal form, etc. The formation of the peanut-shaped CaCO₃ particles suggests the template effect of HBP-CMCS molecules on the aggregation behavior of CaCO₃ nanocrystals.     

Charge, stereochemistry, or epitaxy? Toward controlled biomimetic nucleation at mixed monolayer templates

Floating monolayer mixtures of cationic dioctadecyldimethyldiammonium bromide and anionic lipids were used as variable templates for the biomimetic nucleation of calcium carbonate and studied using grazing incidence X-ray diffraction. Varying the ratio of constituents changes the monolayer charge, structure, and molecular tilt. The nucleating surface of calcite also changes as the mixture is varied, and at an 80:20 ratio the (012) face is seen under a floating monolayer template for the first time. Our results indicate that the average template lattice is the major controlling factor in the oriented nucleation of CaCO(3). This is in contrast to the current view that the orientation is controlled by the stereochemical matching of the terminal functional group and molecular tilt with respect to the carbonate groups in the crystal.     

Patterning inorganic (CaCO3) thin films via a polymer-induced liquid-precursor process

The biomimetic synthesis of patterned mineral thin films, based on a combination of the microcontact printing technique and a novel crystallization process called the polymer-induced liquid-precursor (PILP) process, is demonstrated. The PILP process enables the deposition of smooth and continuous calcitic mineral films (up to 1500 nm in thickness) under low-temperature and aqueous-based processing conditions. The films are formed by deposition of colloidal droplets composed of a liquid-phase mineral precursor that is induced by a polymeric process-directing agent (polyaspartate or polyacrylate salts). The droplets can be preferentially deposited onto patterned substrates templated with self-assembled monolayers (SAMs) of alkanethiolate on gold. The droplets coalesce to form an amorphous mineral film, which then transforms (solidifies and crystallizes) while retaining the shape of the patterned template, providing a means for patterning the location and morphology of two-dimensional calcite crystals. A vertical substrate experiment supports the premise that the calcite films are created by adsorption of colloidal droplets from solution, rather than heterogeneous nucleation and growth of an amorphous phase on the SAMs. Large single-crystalline domains, on the order of 50-100 microm, can be "molded" into nonequilibrium morphologies by constraining the mineral precursor to a chemically defined "compartment". Biominerals are well recognized for their elaborate nonequilibrium molded crystal morphologies, and increasing evidence suggests that many biominerals are formed from an amorphous precursor that is stabilized by polyanionic proteins. The biomimetic system examined here, which consists of a polyanionic process-directing agent in combination with a functionalized organic template, offers a practical tool for generating complex inorganic structures such as those found in biominerals.     

Interactions of salicylic acid derivatives with calcite crystals

Investigation of basic interactions between the active pharmaceutical compounds and calcium carbonates is of great importance because of the possibility to use the carbonates as a mineral carrier in drug delivery systems. In this study the mode and extent of interactions of salicylic acid and its amino acid derivates, chosen as pharmaceutically relevant model compounds, with calcite crystals are described. Therefore, the crystal growth kinetics of well defined rhombohedral calcite seed crystals in the systems containing salicylic acid (SA), 5-amino salicylic acid (5-ASA), N-salicyloil-l-aspartic acid (N-Sal-Asp) or N-salicyloil-l-glutamic acid (N-Sal-Glu), were investigated. The precipitation systems were of relatively low initial supersaturation and of apparently neutral pH. The data on the crystal growth rate reductions in the presence of the applied salicylate molecules were analyzed by means of Cabrera & Vermileya's, and Kubota & Mullin's models of interactions of the dissolved additives and crystal surfaces. The crystal growth kinetic experiments were additionally supported with the appropriate electrokinetic, spectroscopic and adsorption measurements. The Langmuir adsorption constants were determined and they were found to be in a good correlation with values obtained from crystal growth kinetic analyses. The results indicated that salicylate molecules preferentially adsorb along the steps on the growing calcite surfaces. The values of average spacing between the adjacent salicylate adsorption active sites and the average distance between the neighboring adsorbed salicylate molecules were also estimated.     

Thickness-dependent molecular chain and lamellar crystal orientation in ultrathin poly(di-n-hexylsilane) films

The molecular chain and lamellar crystal orientation in ultrathin films (thickness < 100 nm) of poly-(di-n-hexylsilane) (PDHS) on silicon wafer substrates have been investigated by using transmission electronic microscopy, wide-angle X-ray diffraction, atomic force microscopy, and UV absorption spectroscopy. PDHS showed a film thickness-dependent molecular chain and lamellar crystal orientation. Lamellar crystals grew preferentially in flat-on orientation in the monolayer ultrathin films of PDHS, i.e., the silicon backbones were oriented along the surface-normal direction. By contrast, the orientation of lamellar crystals was preferentially edge-on in ultrathin films thicker than ca. 13 nm, i.e., the silicon backbones were oriented parallel to the substrate surface. We interpret the different orientations of molecular chain and lamellar crystal as due to the reduction of the entropy of the polymer chain near the substrate surface and the particularity of the crystallographic (001) plane of flat-on lamellae, respectively. A remarkable influence of the orientations of the silicon backbone on the UV absorption of these PDHS ultrathin films was observed due to the one-dimensional nature of sigma-electrons delocalized along the silicon backbone. With the silicon backbones perpendicular or parallel to the surface of the substrate, the UV absorbance increased or decreased with an increase of the angle between the incident UV beam direction and direction normal to the thin film, respectively.     

Scanning force microscopy study of the morphology of spin‐cast molecular‐imprinted nylon thin films

The morphology of thin, selectively imprinted films of Nylon‐6 was investigated by scanning force microscopy. Four amino acids were used as template molecules in the spin‐cast films. Film thickness ranged from 2 µm to 500 nm, depending on the nylon and template concentration in the casting solution. The thin‐film properties, including the presence of nanometer‐ to micrometer‐sized pores, are clearly associated with the imprinting process. The larger features observed by scanning force microscopy are attributed to amino acid clustering during the casting process. Copyright © 2004 John Wiley & Sons, Ltd.     

TEM investigation of formation mechanism of monocrystal-thick b-oriented pure silica zeolite MFI film

The first direct transmission electron microscopic (TEM) observation has been carried out on the continuous monocrystal-thick b-oriented pure silica zeolite MFI films produced by in situ crystallization. The self-supporting film samples for TEM study were fabricated by dissolving the steel substrate with acid. This TEM study is free of those artifacts that are typically associated with TEM sample preparations, and allows us to investigate the "true" structure and texture of a very large area of the film and at the same time to focus at will on each individual zeolite crystal in the film. Abundant TEM information including crystallographic orientation relationships among crystals in the film (both out-of-plane and in-plane), grain boundaries, and each crystal grain was obtained. This TEM investigation provides direct unambiguous new evidence to support the homogeneous nucleation mechanism, by which the films form through homogeneous nucleation and crystal growth in the bulk to form equal-sized disk-shape crystals, followed by self-assembly of these crystals onto the substrate to produce a two-dimensional close-packed structure. The last stage of the film formation involves simultaneous space-limited growth and rotation of the individual crystals to realize the in-plane crystallographic control within the film.     

Controlled growth of micropatterned, oriented calcite films on a self-assembled multilayer film

A micropatterned multilayer film, which was fabricated from layer-by-layer electrostatic self-assembly of nitrodiazoresin (NDR)/poly(acrylic acid) (PAA) followed by photolithography, was utilized as a structured template for the biomimetic mineralization of calcium carbonate. Micropatterned CaCO3 films consisting of regularly aligned calcite crystals oriented in the <104> direction were selectively deposited on the patterned NDR/PAA multilayer film.