环糊精类高效液相色谱固定相的研究进展

对高效液相色谱中的β－环糊精及其衍生物手性固定相的发展过程进行了综述,５３篇。     

Synthesis of chemically bonded cellulose trisphenylcarbamate chiral stationary phases for enantiomeric separation

Cellulose trisphenylcarbamate is regioselectively bonded to 3-aminopropyl silica gel and underivatized silica gel, respectively, at the 6-position of the primary hydroxyl group on the glucose unit of cellulose with 4,4'-diphenylmethane diisocyanate (DPDI) as a spacer. Enantioseparations are evaluated on these prepared chiral stationary phases (CSPs) with several organic acids as the modifiers in the mobile phase by high-performance liquid chromatography. The influence of the amount of DPDI used on chiral resolution is investigated. Also, the corresponding coated-type phase is also prepared for the aim of comparison. It is observed that the bonded-type phase shows a lower chiral recognition power but a better column efficiency than the coated-type phase under the liquid chromatographic mobile phase with hexane-alcohol. However, the bonded-type CSPs are compatible with a wider number of solvents such as tetrahydrofuran (THF) or chloroform, which generally result in the solubility or swelling of the cellulose derivatives on the coated-type CSPs. The results obtained from this study indicate that the bonded-type CSP may provide complementary enantioselectivity over the coated-type phase by adopting THF as a component in the mobile phase.     

HPLC with chemically bonded stationary phases. 1. ω-hydroxyalkyl silicas

Grignard and trichlorosilane coupling methods have been applied to the synthesis of surface-modified silicas carrying alkyl chains of varying length, terminally substituted by a hydroxyl group. The new phases have been characterized chromatographically using aromatic hydrocarbons, substituted anilines and metal acetylacetonates.     

The use of chemically bonded stationary phases in thin-layer chromatography-a survey

An overview is given of the literature publisned in the field of thin-layer chromatography on chemically bonded phases. Aspects which merit further attention are: quantitative analysis, organic solvent selection, stationary phase characteristics, surface modification of precoated silica plates, ion-pair chromatography and correlation of thin-layer and column chromatographic data.     

高效硅胶化学键合固定相的研究进展

对高效液相色谱用硅胶作为基质的化学键合固定相的研究进展进行了全面的评述。介绍了硅胶基质填料的物理化学性质及前处理过程,详细阐述了化学键合固定相的键合反应机制和种类,概括了化学键合固定相在高效液相色谱中的应用,并对我国的硅胶基质填料研究和应用前景进行了展望。     

Influence of mobile phase composition on retention factors in different HPLC systems with chemically bonded stationary phases

The influence of mobile phase composition on the retention of selected test analytes in different normal- and reversed-phase chromatographic systems is studied. A novel adsorption model for an accurate prediction of the analyte retention in the column chromatography with binary mobile phase is proposed. Performance of the model is compared with the retention model reported in the literature. Both models are verified for different HPLC systems by use of three criteria: (a). the sum of squared differences between the experimental and theoretical data, (b). approximation of the standard deviation, and (c). the Fisher test.     

Chromatographic properties of mixed cyano/ODS chemically bonded phases for HPLC

Summary A number of different cyano/ODS polymeric modified silica gel phases were prepared by simultaneous bonding of cyanoalkylsilanes and octadecylsilane. Cyano contents between 10–80% were obtained. High surface coverage (above 4 μmole/m²), as well as low hydroxyl content, characterised all phases. The modified silica was suitable for separations in both straight and reversed phase mode. Significantly reduced retention times were obtained in the reversed phase mode for high mole-cular weight polyaromatic compounds (Mw above 300).     

Variable-temperature,solid-state NMR studies of bonded liquid crystal stationary phases for HPLC

Summary The spin-spin relaxation time measured from the line width (T ₂*) is used to study bonded phase dynamics of two liquid crystal materials in the solid state as a function of temperature. The motion of these two bonded phases is much more restricted than either C-18 or butyl phenyl bonded to the same substrate. Plots ofT ₂* vs. 1/T indicate a structural transition of the bonded phase moiety for the two liquid crystal materials but no such change is seen for either C-18 or butyl phenyl over the same temperature range (243–353 K), suggesting a higher degree of association between adjacent bonded moieties for the two liquid crystal materials in comparison to the other two phases. The conclusions from solid-state NMR data coincide with results obtained in earlier chromatographic studies.     

Synthesis and characterization of a new type of chemically bonded liquid crystal stationary phase for HPLC

Summary Two commercially available liquid crystals, 4-cyano-4′-n-pentyl-1,1′-bipheny and 4-cyano-4′-n-pentoxy-1,1′-bipheny, are bonded to a silica hydride surface via hydrosilation in the presence of a free radical iniator, t-butyl peroxide. Elemental analysis, diffuse reflectance Fourier trans-form infrared spectroscopy, and¹³C and²⁹Si CP-MAS NMR spectroscopy are used to confirm the success of the bonding reaction. The¹³C CP-MAS spectra suggest a difference in the bonded phase morphology of the two materials. Static hydrolytic stability tests indicate these materials do not degrade significantly in both acidic and basic solutions. Chromatographic tests confirm that these two bonded phase behave differently with respect to their retention of PAHs, alkyl-substituted benzenes and benzodiazepines.     

Chiral capillary HPLC and HPLC-MS: New applications of chemically bonded β-cyclodextrin as stationary phase

Chemically bonded β-cyclodextrin (ChiraDex^®) has been packed into 0.25 mm i.d. capillaries and used for the enantiomer separation of several pharmaceuticals by capillary HPLC with UV and electrospray ionization (ESI) MS detection. While having several advantages over conventional HPLC, capillary HPLC yielded comparable results, e.g. with respect to resolution and sensitivity. The good compatibility to ESI-MS was demonstrated.     

Organic polymer monoliths as stationary phases for capillary HPLC

Modern rigid porous polymer monoliths were conceived as a new class of stationary phases in classical columns in the early 1990s and later extended to the capillary format. These monolithic materials are typically prepared using a simple molding process carried out within the confines of the capillary. Polymerization of a mixture comprising monomers, initiator, and porogenic solvent affords macroporous materials with large through-pores that enable applications in a rapid flow-through mode. Since all the mobile phase must flow through the monolith, convection considerably accelerates mass transport within the monolithic separation medium and improves the separations. As a result, monolithic columns perform well even at very high flow rates. Various mechanisms including thermally and UV initiated free radical polymerization as well as ring opening metathesis copolymerizations were demonstrated for the preparation of monolithic capillary columns. The versatility of these preparation techniques was demonstrated by their use with hydrophobic (styrene, divinylbenzene, butyl methacrylate, ethylene dimethacrylate), hydrophilic (2-hydroxyethyl methacrylate, methacrylamide, methylenebisacrylamide), ionizable (vinylsulfonic acid, 2-acrylamido-2-methyl-propanesulfonic acid), and tailor-made (norborn-2-ene, 1,4,4a,5,8,8a-hexahydro-1,4,5,8-exo,endo-dimethanonaphthalene) monomers. Variation of polymerization conditions enables control of the porous properties of the monolith over a broad range and mediates the hydrodynamic properties of the monolithic columns. The applications of polymer-based monolithic capillary columns are demonstrated for numerous separations in the microHPLC mode.     

Innovative chemically bonded ionic liquids-based sol-gel coatings as highly porous, stable and selective stationary phases for solid phase microextraction

In this work, two allyl-functionalised ionic liquids (ILs), 1-allyl-3-methylimidazolium hexafluorophosphate and 1-allyl-3-methylimidazolium bis(trifluoromethanesulphonyl)imide, were used as selective coating materials to prepare chemically bonded ILs-based organic-inorganic hybrid solid phase microextraction fibres. These fibres were prepared with the aid of γ-methacryloxypropyltrimethoxysilane as bridge using sol-gel method and free radical cross-linking technology. The underlying mechanisms of the sol-gel reaction were proposed, and the successful binding of these functional ILs to the sol-gel substrate was confirmed by Fourier transform infrared spectroscopy. These IL-based sol-gel coatings had porous surface structure, high thermal stability, a wide range of pH stability, strong solvent resistance and good coating preparation reproducibility. They also had high selectivity and sensitivity towards strong polar phenolic environmental estrogens (PEEs) and aromatic amines due to the strong electrostatic interactions, hydrogen bonding and π-π interactions provided by the special molecular structure of these imidazolium ILs. Moreover, their characteristics were somewhat different depending on the type of anions in the IL structure. The practical applicability of these IL-based sol-gel coatings was evaluated through the analysis of PEEs in two real water samples. The detection limits were quite low, varying from 0.0030 to 0.1248 μg L⁻¹. The linearity was very good in the range of 0.1 to 1000 μg L⁻¹ for most analytes, and the relative standard deviation values were below 6%. The relative recoveries were between 83.1 and 104.1% for lake water and between 89.1 and 97.1% for sewage drainage outlet water.     

Polysaccharide derivatives as chiral stationary phases in HPLC

Twenty different tris(phenylcarbamate)s of cellulose were synthesized and evaluated as chiral stationary phases for HPLC. Optical resolving power of the tris(phenylcarbamate)s depends on the substituents introduced on the phenyl groups. Optical resolving abilities of amylose tris(phenylcarbamate)s were also evaluated. In most cases, either cellulose tris(3,5-dimethylphenylcarbamate) or amylose tris(3,5-dimethylphenylcarbamate) exhibited the highest optical resolving ability. Aralkylcarba-mates such as benzyl- and 1-phenylethylcarbamates of cellulose and amylose were also tested as chiral stationary phases. (S)-1-Phenylethylcarbamate of amylose showed a high optical resolving power.     

Glass open-tubular capillary columns with chemically bonded methyl-phenyl siloxane stationary phases of tailor made polarity

Summary The previously described method yielding apolar, chemically bonded methyl polysiloxane glass capillary columns was extended to the production of capillary systems of controlled polarity. The approach involved prior synthesis of a reactive methyl-phenyl polysiloxane polymer by copolymerisation of a mixture of dimethyl and diphenyl chlorosilanes. The polymer was then chemically bonded to the capillary glass surface to yield remarkably stable, high resolution analytical systems which were shown to be particularly well suited to the separation of biochemical mixtures at the subnanogram level. The principle of copolymerisation of differently substituted silanes confers to the method a considerable flexibility which could be used to devise polar capillary systems tailor made for a given analytical problem.