Synthesis,characterization and antimalarial activity of new iridium–chloroquine complexes

Chloroquine base (CQ) reacts with [Ir(COD)Cl]₂ and IrCl₃ · 3H₂O to yield of Ir(CQ)Cl(COD) (1) and Ir₂Cl₆(CQ) · 3H₂O (2), respectively. Reaction of [Ir(COD)Cl]₂ with CQ in the presence of NH₄PF₆ leaded to [Ir(CQ)(Solv)₂]PF₆ (3). The three new iridium–CQ complexes were characterized by a combination of elemental analysis, IR and NMR spectroscopies and evaluated in vitro against Plasmodium beghei. Comparison of the IC₅₀ values obtained with the experimental compounds with that determined for chloroquine diphosphate indicated a higher activity for complex 2, while complexes 1 and 3 showed a similar and lower activity, respectively.     

Preparation and characterization of two three-dimensional metal–organic photoluminescent supramolecular networks

Two novel photoluminescent coordination compounds of the formula [Cd(atpt)phen(H₂O)] · H₂O (1) and [Zn₂(atpt)₂(bipy)₂(H₂O)₂] (2) (H₂atpt = 2-aminoterephthalic acid, bipy = 2,2′-bipyridine and phen = 1,10-phenanthroline) were synthesized through the self-assembly of H₂atpt and N-containing ligands (bipy for 1 and phen for 2) with metal(II) ions in the presence of NaOH, and were characterized by FT-IR spectroscopy, thermogravimetric analysis (TG), X-ray analysis and photoluminescence spectra in the solid state. Compound 1 is the first structurally characterized Cd(II) complex with the atpt ligand. The coordination mode of the atpt ligand in 2 is novel and is first reported in this presentation. X-ray crystallographic studies reveal that compound 1 shows a 1D architecture. Compound 1 further assembles into a 3D supramolecular network via interchain hydrogen bonds and π–π stacking interactions. Compound 2 exhibits a binuclear structure with intramolecular π–π stacking interactions, which is further extended into a 3D supramolecular framework via intermolecular hydrogen bonds and C–H?π interactions. Compounds 1 and 2 exhibit green photoluminescence in the solid state at room temperature.     

Preparation and characterization of calcium phosphate–albumin colloidal particles by high ultrasonic irradiation

Using high intensity ultrasonic irradiation, we prepared calcium phosphate–albumin colloidal particles from aqueous solutions of Ca(H₂PO₄)₂ and Ca(OH)₂ in the presence of bovine serum albumin (BSA). The effect of concentration of BSA (2–5 g/L) properties of the colloidal particles was studied at constant temperature. The effect of a resting period on the size distribution of the colloidal particles was also investigated. Morphology, phase composition, average diameter, size distribution and zeta potential were obtained by transmission electron microscopy, X-ray diffraction, particle size determination by PCS and electrokinetic measurements.     

Equilibrium and structural characterization of ofloxacin–cyclodextrin complexation

The enantiomer-specific characterization of ofloxacin–cyclodextrin complexes was carried out by a set of complementary analytical techniques. The apparent stability constants of the ofloxacin enantiomers with 20 different cyclodextrins at two different pH values were determined to achieve good resolution capillary electrophoresis enantioseparation either to establish enantioselective drug analysis assay, or to interpret and design improved host–guest interactions at the molecular level. The cyclodextrins studied differed in the nature of substituents, degree of substitution (DS), charge and purity, allowing a systematic test of these properties on the complexation. The seven-membered beta-cyclodextrin and its derivatives were found to be the most suitable hosts. Highest stability and best enantioseparation were observed for the carboxymethylated-beta-cyclodextrin (DS ~ 3.5). The effect of substitution pattern (SP) was investigated by molecular modeling, verifying that SP greatly affects the complex stability. Induced circular dichroism was observed and found especially significant on carboxymethylated-beta-cyclodextrin. The complex stoichiometry and the geometry of the inclusion complexes were determined by ¹H NMR spectroscopy, including 2D ROESY techniques. Irrespective of the kind of cyclodextrin, the complexation ratio was found to be 1:1. The alfa-cyclodextrin cavity can accommodate the oxazine ring only, whereas the whole tricyclic moiety can enter the beta- and gamma-cyclodextrin cavities. These equilibrium and structural information offer molecular basis for improved drug formulation.     

Heteropolymolybdate–amino acid complexes: synthesis,characterization and biological activity

Three Keggin-type polyoxometalates functionalized by amino acids, (C₅H₁₃N₂O₂)₂(H₃O)PMo₁₂O₄₀·8H₂O 1, (C₅H₁₄N₂O₂)₂SiMo₁₂O₄₀·12H₂O 2 and (C₅H₁₄N₂O₂)₂GeMo₁₂O₄₀·12H₂O 3, were synthesized and characterized by elemental analysis, IR and ¹H?NMR spectra and single-crystal X-ray diffraction. The X-ray crystallographic study showed that the structures of the three compounds involved N–H···O and O–H···O hydrogen bonds among the protonated ornithine cations, water molecules and the heteropolyanion cluster, and thus represent a model interaction between polyoxometalates and proteins. These complexes display inhibitory actions to the human cancer cells Hela and PC-3?m in vitro.     

Preparation,characterization and activity evaluation of p–n junction photocatalyst p-NiO/n-ZnO

In this paper, p–n junction photocatalyst NiO/ZnO was prepared by the sol–gel method using Ni (NO₃)₂ and zinc acetate as the raw materials. The structural and optical properties of the p–n junction photocatalyst NiO/ZnO were characterized by X-ray photoelectron spectroscopy (XPS), X-ray powder diffraction (XRD), scanning electron microscopy (SEM), Brunauer–Emmett–Teller (BET) analysis, UV–Vis diffuse reflection spectrum (DRS) and the fluorescence emission spectra. The photocatalytic activity of the photocatalyst was evaluated by photocatalytic reduction of Cr₂O₇ ²⁻ and photocatalytic oxidation of methyl orange (MO). The results showed that the photocatalytic activity of the p–n junction photocatalyst NiO/ZnO is much higher than that of ZnO on the photocatalytic reduction of Cr₂O₇ ²⁻. However, the photocatalytic activity of the photocatalyst is much lower than that of ZnO on the photocatalytic oxidation of methyl orange. Namely, the p–n junction photocatalyst NiO/ZnO has higher photocatalytic reduction activity, but lower photocatalytic oxidation activity. The heat treatment condition also influences the photocatalytic activity strongly, and the best preparation condition is about 400 °C for 2 h. Effect of the heat treatment condition on the photocatalytic activity of the photocatalyst was also investigated. The mechanisms of influence on the photocatalytic activity were discussed by the p–n junction principle.     

Synthesis,characterization and magnetic properties of supramolecular metal–organic complexes constructed from flexible–rigid mixed ligands

Two new supramolecular metal–organic complexes have been synthesized under hydrothermal conditions. Complex 1 exhibits a three-dimensional supramolecular network, constructed from [Co₂(H₃BPTC)₂(phen)₂] (H₄BPTC = 3,3′4,4′-benzophenone tetracarboxylate acid, phen = 1,10-phenanthroline) discrete units. Complex 2 similarly exhibits discrete [Cu₂(DPA)₂(bipy)₂(H₂O)₂] (DPA = 1,1′-biphenyl-2,2′-dicarboxylate acid, bipy = 2,2′-bipyridine) units, which are linked to form a three-dimensional supramolecular network through π–π interactions. It is interesting that during the synthesis of complex 1, the H₄BPTC ligands undergo partial decomposition to give 1,2,4-benzenetricarboxylate (H₃BTC) ligands, which react with Co to form [Co₃(BTC)₂]_n (3). Complex 3 shows a three-dimensional covalent network. The magnetic properties of complexes 1 and 2 have been studied.     

Preparation, characterization, and catalysis of mecro-catalysts

Because catalysis by metals is a surface phenomenon, many technological catalysts contain small (typically nanometre-sired) supported metal particles with a large fraction of the atoms exposed. Many reactions, such as hydrocarbon hydrogenations, are structure-insensitive, proceeding at approximately the same rates on metal particles of various sizes provided that they are larger than 1 nm and show bulk-like metallic behavior. But the catalytic properties are not known when metal particles become so small that their sizes are indium clusters consisting of several indium atoms. Here the catalytic behavior of precisely defined clusters of just four and six indium atoms on solid supports is shown. It is found that the Ir4 and Ir6 clusters differ in catalytic activity both from each other and from metallic Ir particles.     

Preparation and characterization of polyacrylamide–silver nanocomposites

Polyacrylamide–silver nanocomposites are successfully prepared by irradiating the aqueous solution of AgNO₃ and acrylamide monomer with ⁶⁰Co γ-ray. The composites are found to contain nanometer silver particles with a narrow size distribution and a homogeneous dispersion. The existing of isopropanol (as a hydroxyl radical scavenger and chain transfer agent) in system affects the properties of both the dispersed phase and matrix of the nanocomposites. The fast-formed polymer chains probably play a key role in preventing the aggregation of silver particles which are reduced later.     

Preparation and characterization of Cp-functionalized cycloheptatrienyl–cyclopentadienyl titanium sandwich complexes (troticenes)

Cp-functionalized monotroticenes [(η⁷-C₇H₇)Ti(η⁵-C₅H₄E)] (2, E = Ph₂SiCl; 3, E = tBu₂SnCl; 12, E = I) and bitroticenes [(η⁷-C₇H₇)Ti(η⁵-C₅H₄)]₂E′ (5, E′ = PPh; 6, E′ = BN(SiMe₃)₂; 7, E′ = Cp₂Ti) were prepared by salt elimination metathesis between the monolithiated troticene [(η⁷-C₇H₇)Ti(η⁵-C₅H₄Li)]·pmdta (1b) (pmdta = N,N′,N′,N″,N″-pentamethyldiethylene-triamine) and the appropriate electrophile. The troticenyl-substituted zirconocene monochloride [(η⁷-C₇H₇)Ti(η⁵-C₅H₄ZrClCp*₂)] (Cp* = η⁵-C₅Me₅) (8) and hafnocene ethoxide [(η⁷-C₇H₇)Ti{η⁵-C₅H₄Hf(OEt)Cp₂}] (Cp = η⁵-C₅H₅) (11), and the heterobimetallic μ-oxo complexes [(η⁷-C₇H₇)Ti(η⁵-C₅H₄MCp₂)]₂O (9, M = Zr; 10, M = Hf) were obtained instead of the expected zircona- and hafna[1]troticenophanes by reaction of the dilithiated troticene [(η⁷-C₇H₆Li)Ti(η⁵-C₅H₄Li)]·pmdta (1a) with [Cp₂MCl₂] (M = Zr, Hf) or [Cp*₂ZrCl₂] in stoichiometric amounts. These compounds were characterized by single crystal X-ray diffraction analyses and, in the case of 2, 3, 5–7, 9, 10 and 12, also by elemental analyses and ¹H, ¹³C and ¹¹⁹Sn NMR spectroscopy. Exposure of the troticenyl organotin chloride 3 to moisture resulted in its partial hydrolysis and formation of the organostannoxane-bridged bitroticene 4, while palladium-catalyzed Negishi C–C cross-coupling reaction between the troticenylzinc chloride [(η⁷-C₇H₇)Ti(η⁵-C₅H₄ZnCl)] (13) and the iodotroticene 12 or iodobenzene (PhI) led to the fulvalene complexes [(η⁷-C₇H₇)Ti(η⁵-C₅H₄)]₂ (14) and [(η⁷-C₇H₇)Ti(η⁵-C₅H₄Ph)] (15). Compound 4 displays an unsymmetrical structure with the troticenyl fragments cis with respect to the Sn–O–Sn core, whereas compound 14 is centrosymmetrically trans oriented.     

Preparation and characterization of Cp-functionalized cycloheptatrienyl–cyclopentadienyl titanium sandwich complexes (troticenes)

Cp-functionalized monotroticenes [(η⁷-C₇H₇)Ti(η⁵-C₅H₄E)] (2, E = Ph₂SiCl; 3, E = tBu₂SnCl; 12, E = I) and bitroticenes [(η⁷-C₇H₇)Ti(η⁵-C₅H₄)]₂E′ (5, E′ = PPh; 6, E′ = BN(SiMe₃)₂; 7, E′ = Cp₂Ti) were prepared by salt elimination metathesis between the monolithiated troticene [(η⁷-C₇H₇)Ti(η⁵-C₅H₄Li)]·pmdta (1b) (pmdta = N,N′,N′,N″,N″-pentamethyldiethylene-triamine) and the appropriate electrophile. The troticenyl-substituted zirconocene monochloride [(η⁷-C₇H₇)Ti(η⁵-C₅H₄ZrClCp*₂)] (Cp* = η⁵-C₅Me₅) (8) and hafnocene ethoxide [(η⁷-C₇H₇)Ti{η⁵-C₅H₄Hf(OEt)Cp₂}] (Cp = η⁵-C₅H₅) (11), and the heterobimetallic μ-oxo complexes [(η⁷-C₇H₇)Ti(η⁵-C₅H₄MCp₂)]₂O (9, M = Zr; 10, M = Hf) were obtained instead of the expected zircona- and hafna[1]troticenophanes by reaction of the dilithiated troticene [(η⁷-C₇H₆Li)Ti(η⁵-C₅H₄Li)]·pmdta (1a) with [Cp₂MCl₂] (M = Zr, Hf) or [Cp*₂ZrCl₂] in stoichiometric amounts. These compounds were characterized by single crystal X-ray diffraction analyses and, in the case of 2, 3, 5–7, 9, 10 and 12, also by elemental analyses and ¹H, ¹³C and ¹¹⁹Sn NMR spectroscopy. Exposure of the troticenyl organotin chloride 3 to moisture resulted in its partial hydrolysis and formation of the organostannoxane-bridged bitroticene 4, while palladium-catalyzed Negishi C–C cross-coupling reaction between the troticenylzinc chloride [(η⁷-C₇H₇)Ti(η⁵-C₅H₄ZnCl)] (13) and the iodotroticene 12 or iodobenzene (PhI) led to the fulvalene complexes [(η⁷-C₇H₇)Ti(η⁵-C₅H₄)]₂ (14) and [(η⁷-C₇H₇)Ti(η⁵-C₅H₄Ph)] (15). Compound 4 displays an unsymmetrical structure with the troticenyl fragments cis with respect to the Sn–O–Sn core, whereas compound 14 is centrosymmetrically trans oriented.     

Preparation and characterization of inclusion complexes of carvedilol with methyl-β-cyclodextrin

Aim of the present work was to investigate the effect of methyl-β-cyclodextrin (MβCD) on the solubility and dissolution rate of carvedilol (CAR), a drug used orally for the treatment of hypertension. Phase solubility studies showed an A_L-type diagram indicating the formation of inclusion complex in 1:1 molar ratio. Solid binary systems of the drug with MβCD were prepared by various methods. Physicochemical characterizations were performed using Fourier Transformation Infrared Spectroscopy, Differential Scanning Calorimetry and powder X-Ray Diffractometry. It could be concluded that CAR can form inclusion complex with MβCD. The dissolution profiles of inclusion complexes were determined and compared with those of CAR alone and the physical mixture. The dissolution rate of CAR was increased by MβCD inclusion complexation remarkably.     

Microwave-assisted synthesis of novel cyclodextrin–cucurbituril complexes

Microwave irradiation was successfully used in order to obtain stable supramolecular aggregates between cyclodextrins and cucurbiturils, without the participation of any long-chain common ‘molecular thread’ guest. These aggregates were characterised by means of various different techniques, namely NMR, thermogravimetry, polarimetry and ESI-MS. Cross-analysis of experimental data allowed us to obtain insights on the stoichiometries of the composites and their thermal stabilities. The possible structures of the composites are briefly discussed, as well as the actual nature of their intrinsic stability.     

Preparation and characterization of the inclusion complexes of equol with sulfobutylether-β-cyclodextrin: their antioxidant activity and dissolution evaluation

The formation of inclusion complexes between S-(?)-equol (SEq) and cyclodextrins (CDs) was investigated. The binding constant (K_c) of the SEq/sulfobutylether-β-cyclodextrin (SBE-β-CD) inclusion complex was determined to be 1600 L/mol based on UV data. The phenyl ring of the SEq molecule was found to be inserted from the secondary hydroxyl face of the SBE-β-CD as evidenced from ¹H–¹H rotating frame nuclear Overhauser effect spectroscopy (ROESY) NMR. The thermal properties of the solid SEq/SBE-β-CD inclusion complexes prepared by physical mixing, kneading and freeze-drying methods were studied by differential scanning calorimetry. For the solid complex obtained by the freeze-drying method, the endothermic peak corresponding to the melting point of SEq disappeared. The solid SEq/SBE-β-CD complexes exhibited a high score in antioxidant activity evaluation tests compared to SEq alone. Dissolution test revealed that the solid complex obtained by freeze-drying method had improved dissolution of SEq.     

Synthesis,characterization and antitumour activity of uracil and uracil–histidine complexes with metal(III) ions

Complexes of the[Al(L-H)(OH)Cl],[M(L-H)(H2O)2- (OH)Cl] and [M(L-H)(L-H)(H2O)Cl] type, where L = uracil (URL); L = histidine (HISD); M = CrIII or FeIII and M = AlIII, CrIII or FeIII were synthesized and characterized. The complexes are polymers, with high decomposition points and are insoluble in water and common organic solvents. Uracil is coordinated to the metal ion through the O atom of C(4)-O and the N atom of N(1), while histidine coordinates through the O atom of -CO2– and the N atom of the -NH2 groups. The eff values, electronic spectral bands and e.s.r. spectra suggest a polymeric six coordinate spin-free octahedral stereochemistry for the CrIII and FeIII complexes. The in vivo and in vitro antitumour activity results indicate that CrIII and FeIII complexes have significant activity against P815 murine mastocytoma but AlIII complexes show poor activity.     

Kinetics of the photodecomposition of supramolecular alkynyl–phosphine complexes

Russian Journal of Physical Chemistry A - Kinetics of decomposition under the action of laser UV radiation is studied for alkynyl–phosphine complexes with bimetallic cores. It is shown that...     

Preparation and characterization of rigid polyurethane–polyglycerol nanocomposite foams

This work reports on the preparation of polyurethane–polyisocyanurate (PUR–PIR) foams containing different polyglycerols and layered silicate nanoclays. The rigid polyurethane foams were obtained in a laboratory scale, in a single step method, from a two-component system with a NCO to OH groups ratio equal to two. The reaction mixture consisted of the proper amounts of a commercial oligoetherpolyol, polyglycerol, catalysts, water, nanofiller, and polymeric diphenylmethane diisocyanate. The obtained foams containing 6% of one of three types of montmorillonite (MMT) (Cloisite 30B, Laponite RD, Bentonite) were characterized in terms of their structure, density, brittleness, compressive strength and thermal stability. The nanocomposite foams showed a higher number of cells with a smaller cell size in the presence of MMT, while the foams modified with nanofiller Cloisite 30B presented the best compressive strength and the best fire resistance.     

Preparation,characterization, and hydrogenation activity of new Rh0–MCM-41 catalysts prepared from as-synthesized MCM-41 and RhCl3

Impregnation of as-synthesized MCM-41 silica by ethanolic solutions of rhodium(III) chloride was tested as an alternative to its introduction into the synthesis gel to get, after calcination and reduction by H₂, highly dispersed metal(0) nanoparticles throughout the mesopores network. Rh(III) and Rh(0)–based solids thus obtained were analyzed by infrared spectroscopy, elemental analysis, transmission electron microscopy, N₂ sorption, and X-ray diffraction. Materials with 1.6 wt % of rhodium could be obtained as a result of CTA⁺/Rh³⁺ exchange. The determining role of CTA⁺ was emphasized through blank experiments. In a second series of materials, ethanol was also exploited for its ability to reduce Rh(III). All Rh(0)-based solids were tested as catalysts in the hydrogenation of styrene under mild temperature and pressure conditions. Catalysis performances of the most efficient sample (reduced by H₂) were further compared with those of a very similar material prepared by the introduction of Rh(III) directly into the synthesis gel of MCM-41 silica. Better cis selectivities in the hydrogenation of disubstituted arene derivatives were achieved with materials issued from the new preparation method.