聚合酶链反应产物的HPLC定量分析

建立了ＨＰＬＣ分析聚合酶链反应（ＰＣＲ）产物的方法,探讨了梯度、流速、柱温等条件对相对分子质量参照物λ－ＤＮＡ－ＨｉｎｄⅢ分离的影响,ＮａＣｌ以４０～５０ｍｍｏｌ／ｍｉｎ的梯度变化,流速为１ｍＬ／ｍｉｎ时分离效果最佳。该法精密度和回收率高、线性良好,可用于ＰＣＲ扩增条件优化时的相对定量分析。     

聚乙二醇—硫酸铵—亚硝基R盐体系中钴（Ⅱ）的分离及其存在形态

在ｐＨ４．０～６．０的ＨＡｃ－ＮａＡｃ缓冲溶液中，Ｃｏ（Ⅱ），Ｆｅ（Ⅲ），Ｎｉ（Ⅱ），Ｃｕ（Ⅱ）等金属离子与亚硝基Ｒ盐可形成稳定络合物，加入ＨＣｌ适当提高溶液酸度（ＨＣｌ浓度在０．３～０．６ｍｏｌ／Ｌ）用聚乙二醇２０００（ＰＥＧ）－硫酸铵－亚硝基Ｒ盐体系萃取，Ｃｏ（Ⅱ）可被ＰＥＧ相几乎完全萃取，而Ｆｅ（Ⅲ），Ｎｉ（Ⅱ），Ｃｕ（Ⅱ）基本上不被萃取，实现了Ｃｏ（Ⅱ），Ｆｅ（Ⅲ），Ｎｉ（Ⅱ），Ｃｕ（Ⅱ）     

高效离子交换液相色谱法分离绿脓杆菌外膜蛋白

利用高效ＤＥＡＥ离子交换液相色谱法分离纯化了绿脓杆菌标准菌株ＰＡＯ１外膜蛋白。流动相为ｐＨ８．０Ｔｒｉｓ－ＨＣｌ缓冲液,色谱柱为ＴＳＫｇｅｌ－ＤＥＡＥ－５ＰＷ（０．７５ｃｍ×７．５ｃｍｉ．ｄ．）。通过纯化外膜蛋白,可以为研究绿脓杆菌外膜通透性与抗生素耐药性之间的关系及缩短研究周期提供有效的方法。     

高效液相色谱法分析逆转录聚合酶链反应产物

建立了分离逆转录聚合酶链反应（ＲＴ ＰＣＲ）产物的高效液相色谱方法,反应液直接进样,用ＴＳＫｇｅｌＤＥＡＥ ＮＰＲ柱分离,Ｔｒｉｓ ＨＣｌ缓冲溶液（ｐＨ９０） 氯化钠线性梯度洗脱,于２６０ｎｍ处检测。用所建立的方法分析了大鼠肠缺血／再灌注损伤后外周血中性粒细胞（ＰＭＮ）磷脂酶Ａ２ｍＲＮＡ的表达。     

高效离子交换液相色谱法分离绿脓杆菌外膜蛋白

 利用高效ＤＥＡＥ离子交换液相色谱法分离纯化了绿脓杆菌标准菌株ＰＡＯ１外膜蛋白。流动相为ｐＨ８．０Ｔｒｉｓ－ＨＣｌ缓冲液,色谱柱为ＴＳＫｇｅｌ－ＤＥＡＥ－５ＰＷ（０．７５ｃｍ×７．５ｃｍｉ．ｄ．）。通过纯化外膜蛋白,可以为研究绿脓杆菌外膜通透性与抗生素耐药性之间的关系及缩短研究周期提供有效的方法。     

脱氧核糖核酸（DNA）的极谱伏安行为研究

研究了脱氧核糖核酸的极谱伏安行为，在０．１ｍｏｌ．Ｌ＾－１ＮＨ４Ｃｌ溶液中ＤＮＡ产生一良好的极谱峰，峰电位Ｅｐ＝－１．６５Ｖ（ｖｓ．Ａｇ／ＡｇＣｌ），且峰电流ｉｐ与ＤＮＡ的浓度在４．５＊１０＾－５－３．７＊１０＾－４ｍｏｌ．ＬＯ＾－１范围内呈线性关系，可望用于ＤＮＡ的定量分析。     

EDTA金属螯合物阴离子交换色谱行为研究

本文报道Ｚｎ（Ⅱ）、Ｃｒ（Ⅲ）、Ｆｅ（Ⅲ）等金属－ＥＤＴＡ螯合物的阴离子交换色谱行为．采用ＰＲＰ－１００阴离子色谱柱，以２．０ｍＬ／ｍｉｎ．流速、４ｍｍｏｌ／Ｌ苯甲酸为淋洗液，电导检测器检测，可以很好地分离Ｚｎ－ＥＤＴＡ２－、Ｃｒ－ＥＤＴＡ－、Ｆｅ－ＥＤＴＡ－．方法可用于废水中金属离子的检测．     

双金属杂原子分子筛CrCoBEA的合成、波谱及催化性能研究

采用水热晶化法首次合成出ＢＥＡ结构含铬、钴，双金属杂原子分子筛ＣｒＣｏＢＥＡ，对晶化时间，晶化温度，成胶配比等合成条件进行了优化研究，采用ＸＲＤ，ＦＴＩＲ，ＵＶ－ＶｉｓＤＲＳ，ＥＳＲ及催化反应等方法测试其物相、波谱性质和催化性能，结果表明物质的量比为ＴＥＯＳ：０．０１７「Ｃｒ（ａｃａｃ）３」：０．０１７「Ｃｏ（ａｃａｃ）３」：（０．５８－０．６４）ＴＥＡＯＨ：０．０１Ａｌ（ＮＯ３）３：（１６－２０     

PMBP为载体的乳状液膜提取钪的研究

研究了以１－苯基－３－甲基－４－苯甲酰基吡唑酮－５（ＰＭＢＰ）为流动载体的乳状液膜（ＥＬＭ）法提取钪，确定最佳液膜体系组成为０．４％ＰＭＢＰ－３％Ｓｐａｎ８０－５％液体石蜡－煤油－３ｍｏｌ／ＬＨＣｌ，Ｒｏｉ＝１：１（油内比）．Ｒｗｅ（水乳比）可达２０：１．用该体系对钪与混合稀土进行分离，钪的回收率可达９５．５％，分离系数β（ＳＣ／ＲＥ）＝３２．０。     

用聚乙二醇—硫酸铵—铝试剂体系萃取分离铁（Ⅲ）铝（Ⅲ）,铜（Ⅱ）钴（Ⅱ）…

研究了在聚乙二醇－硫酸铵－铝试剂体系中Ｆｅ（Ⅲ），Ａｌ（Ⅲ）、Ｃｕ（Ⅱ）、ＣｏⅡ）Ｃｄ（Ⅱ）Ｍｎ（Ⅱ）、Ｎｉ（Ⅱ）的萃取分离行为。结果表明，在ＰＨ５．０－６．５ＨＡｃ－ＮａＡｃ缓冲溶液中，Ｆｅ（Ⅲ）、Ａｌ（Ⅲ）可被ＰＥＧ相几乎完全萃取，而Ｃｕ（Ⅱ）、Ｃｏ（Ⅱ）Ｃｄ（Ⅱ）Ｍｎ（Ⅱ）基本上不被萃取，从而实现了Ｆｅ（Ⅱ）与Ｃｕ（Ⅱ）Ｃｏ（Ⅱ）Ｃｄ（Ⅱ）Ｍｎ（Ⅱ)及Ａｌ（Ⅲ）与Ｆｅ（Ⅲ）Ｃｏ（Ⅱ）、Ｃｕ（     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.