左旋甲基多巴分子印迹微球给药系统的合成、表征及药物缓释研究

采用沉淀聚合法合成了左旋甲基多巴(L-Methyldopa,LMD)分子印迹聚合物微球(MIPMs),并对其合成条件进行了详细研究.结果表明,聚合温度和引发剂的用量对微球的大小和形态有较大的影响,微球的粒径随聚合温度的降低而增大,随偶氮二异丁睛(AIBN)量的增大而增大.而模板分子似乎对微球粒径的影响不是很明显.通过扫描电镜、静态吸附试验(BET)和斯卡查德分析(Scatchardanalysis)、红外光谱分析和模拟人体胃液扩散实验等对微球的外貌形态、吸附性能、分子印迹效果和药物缓释效果进行了表征.BET吸附实验和Scatchard分析结果表明,分子印迹聚合微球(MIPMs)的最大静态吸附量是非印迹聚合物微球(NIPMs)的3倍.药物扩散实验表明,LMD在非印迹微球(NIPMs)上的释药率几乎与时间呈直线关系,说明其释药过程完全受扩散控制;而LMD在MIPMs上的释药率则呈曲线上升趋势,说明其释药过程除了受扩散控制外,还受到药物模板分子与MIPMs之间的印迹效应的协同作用的控制,从而达到了缓释药物分子的目的.实验结果表明,在模拟胃液中,MIPMs释放药物的持续时间(10h)是NIPMs持续时间(5h)的2倍,表明分子印迹微球确实具有缓释药物的效果.因此,MIPMs有望进一步应用于LMD药物缓释系统的研究.     

种子溶胀悬浮聚合法制备分子印迹聚合物微球

 以酪氨酸为印迹分子 ,甲基丙烯酸为功能单体 ,三羟甲基丙烷三甲基丙烯酸酯 (TRIM )为交联剂 ,采用种子溶胀悬浮聚合法在水溶液中制备了一系列分子印迹聚合物微球 (MIPMs)。利用扫描电镜 (SEM)对此微球的粒径大小、粒径分布、表面孔与孔径分布等进行了分析研究 ,探讨了影响其形貌的主要因素 ,并将所得微球用作固定相研究了其分子选择吸附性能。研究表明 ,种子溶胀悬浮聚合法能够制得单分散性较好的、表面带有微孔的分子印迹聚合物微球 ,且该微球呈现出较好的特异吸附性能。     

5-氟尿嘧啶分子表面印迹微球MIP-PSSS/CPVA的制备及其体外结肠定位释药特性研究

以对苯乙烯磺酸钠(SSS)为功能单体, 以N,N'-亚甲基双丙烯酰胺(MBA)为交联剂, 采用铈盐-羟基氧化还原引发体系, 在交联聚乙烯醇(CPVA)微球表面实施了5-氟尿嘧啶(5-FU)分子的表面印迹, 在微球CPVA表面形成印迹聚合物(MIP)层, 即制备了5-FU分子印迹微球MIP-PSSS/CPVA. 采用红外光谱(FTIR)和扫描电子显微镜(SEM)法, 对印迹微球进行了表征. 重点考察分析了印迹微球对5-氟尿嘧啶(5-FU)的结合(载药)性能与结合机理, 考察探索了载药微球在不同pH介质中的释放行为. 实验结果表明, 基于本体系特殊的羟基-铈盐表面引发体系, 可有效地实现5-FU分子的表面印迹, 在微球CPVA表面形成分布有大量5-FU分子印迹空穴的聚合物层. 在酸性介质中, 受强静电相互作用的驱动, 印迹微球MIP-PSSS/CPVA对5-FU分子表现出很强的结合能力, 结合容量达110 mg/g, 可实现有效载药. 载药微球的释药行为既具有强烈的pH依赖性, 又具有时滞性: 在模拟胃液中(pH＝1), 基本不释药; 在模拟小肠液中(pH＝6.8), 释药量很小; 在模拟结肠液中(pH＝7.4), 则发生突释, 表现出高效的结肠定位释放行为.     

茶碱分子表面印迹微球的制备及其体外释药性能

通过分子表面印迹技术,采用铈盐-羟基氧化还原引发体系,以交联聚乙烯醇(CPVA)微球为基质、对苯乙烯磺酸钠(SSS)为功能单体、茶碱(TP)为模板药物分子、N,N′-亚甲基双丙烯酰胺(MBA)为交联剂,制备了TP分子表面印迹微球MIP-PSSS/CPVA。采用红外光谱测定其结构,扫描电镜观察其表面形貌,静态法考察印迹微球MIP-PSSS/CPVA对TP的结合性能及载药印迹微球的体外释药行为。结果表明:TP分子表面印迹微球MIP-PSSS/CPVA对TP具有较高的识别选择性和结合亲合性,当pH=1时,微球对TP的结合容量达到92mg/g。该印迹微球在模拟胃液中基本不释药;在模拟小肠液中的第2~6h,累积释放率仅为21%;而在模拟结肠液中突释,之后持续缓慢地释放,表现出优良的pH敏感和时滞双重型结肠定位释药特性。     

克百威分子印迹固相萃取微球的制备及性能

以偶氮二异丁腈为引发剂,2~3μm的聚苯乙烯微球为种球,克百威为模板分子,甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,采用单步溶胀法制备粒径均一的克百威分子印迹聚合物微球(MIPMs)。通过扫描电镜(SEM)、吸附平衡实验和竞争吸附实验分析了克百威MIPMs的形貌及其对克百威的结合特性及吸附选择性,并比较了克百威分子印迹固相萃取柱(MISPE)与C18固相萃取柱(C18SPE)富集水中克百威的效果。结果表明:合成的MIPMs粒径约10μm,表面呈蜂窝状;在90min内可达到饱和吸附,最大吸附量为25.94mg/g;在克百威、灭多威和三羟基克百威共存的条件下,克百威MIPMs可实现对克百威的专一性吸附;与C18SPE相比,克百威MISPE重复使用6次后加标回收率仍在85%以上,可用于水体中痕量克百威的检测。     

加替沙星印迹聚合物的制备及结合特性研究

以微米级聚苯乙烯微球为种子、加替沙星为模板分子,采用单步溶胀聚合法,在水相中制得了分子印迹聚合物微球(MIPMs)。通过紫外光谱研究MIPMs的识别机理;利用红外光谱分析MIPMs的结合位点,运用扫描电镜观察微球的形貌;并结合加替沙星的荧光性质,利用荧光光谱研究MIPMs的结合特性。Scatchard分析表明,MIPMs在识别加替沙星过程中存在两类结合位点,高亲和力结合位点的平衡离解常数KD1=0.603mmol/L,最大结合量Bmax1=28.62μmol/g;低亲和力结合位点的平衡离解常数KD2=3.110mmol/L,最大结合量Bmax2=74.27μmol/g。     

基于金属卟啉的甲基磷酸二甲酯分子印迹聚合物微球的合成及性能

合成了分别以5-(4-甲基丙烯酰氧苯基)-10,15,20-三苯基锌卟啉(ZnMOTPP)和5-(4-甲基丙烯酰氧苯基)-10,15,20-三苯基钆卟啉(GdMOTPP)为功能单体, 甲基丙烯酸(MAA)为辅助功能单体的甲基磷酸二甲酯(DMMP)分子印迹聚合物微球. 扫描电子显微镜(SEM)表征结果表明, 微球平均粒径为50～100 μm, 粒度均匀. 与甲基丙烯酸作为功能单体的分子印迹聚合物微球的吸附性能和特异性进行对比发现, ZnMOTPP分子印迹微球的吸附性能优于 GdMOTPP分子印迹微球, 金属卟啉分子印迹微球的吸附性能优于仅以甲基丙烯酸作为功能单体的分子印迹微球, 并且微球对其印迹分子DMMP具有特异性吸附. Scatchard分析表明, DMMP分子印迹空穴中只存在一类结合位点, MIPMs-Zn+MAA的最大吸附量Q_max=148 μmol/g, MIPMs-Gd+MAA的Q_max=78.9 μmol/g, MIPMs-MAA的Q_max=13.57 μmol/g.     

TNT分子印迹聚合物微球的合成与性能研究

以三硝基甲苯(TNT)为模板分子,EDMA为交联剂,采用沉淀聚合法制备了TNT分子印迹微球.讨论了溶剂用量、模板分子用量、功能单体种类等对分子印迹微球的形貌及吸附性能的影响;利用紫外吸收光谱和BET表征了印迹聚合物微球的结合位点相互作用与印迹孔穴结构;通过平衡吸附和选择性吸附实验,研究了印迹聚合物微球的吸附性能和选择性识别性能.结果表明,以丙烯酰胺为功能单体制备的分子印迹聚合物为规则的球形,内部含有分子印迹孔穴,微球的粒径为1～2μm.印迹聚合物微球可在30 min内达到吸附平衡,在1 mmol/L的TNT乙醇溶液中,印迹聚合物微球的平衡吸附量为32.5 mmol/kg,对TNT分离系数为25.19,具有较好的特异性吸附能力,并可选择性识别TNT分子.     

具有高选择性吸附的表面分子印迹磁性纤维素微球的制备与性能

以纤维素和纳米Fe₃O₄为原料制得磁性纤维素微球, 在纤维素微球表面选择合适的模板分子, 以甲基丙烯酸、 丙烯酰胺和N,N'-亚甲基双丙烯酰胺为功能单体, 采用水溶液聚合法制得表面分子印迹磁性纤维素微球. 采用傅里叶变换红外光谱(FTIR)、 X射线衍射(XRD)和振动样品磁强计(VSM)等表征了分子印迹聚合物微球的结构. 以罗丹明B(RhB)为模板分子, 通过吸附动力学与吸附热力学实验研究了表面分子印迹磁性纤维素微球对RhB的吸附性能, 结果表明, 制备的表面分子印迹磁性纤维素微球对罗丹明B具有特异性识别作用, 饱和吸附量达到0.542 mg/mg, 吸附平衡时间为10 h左右. 表面分子印迹磁性纤维素微球大大降低了对吸附环境的依赖, 并可重复利用.     

毒死蜱分子印迹聚合物微球的制备及结合特性的研究

采用无皂乳液聚合法制得的微米级聚苯乙烯微球为种球,以毒死蜱为模板分子,通过单步溶胀聚合法制备了单分散分子印迹聚合物微球（MIPMs）。通过紫外光谱研究了MIPMs的结合机理和识别特性;利用红外光谱分析MIPMs的结合位点;运用扫描电子显微镜对微球进行形貌分析,MIPMs的粒径分布为0.5～3 μm（UMIPMs为2～3 μm）,其表面粗糙具有一定层次孔径分布的多孔性聚合物,有利于底物和结合位点的接触,从而获得高负载量和高效识别性;Scatchard 分析表明MIPMs在识别毒死蜱过程中存在两类结合位点,计算得高亲和性位点的解离常数为 KD1 = 0.526 mmol/L,最大表观结合量Bmax1 = 35.91 μmol/ g,低亲和位点的解离常数为 KD2 = 2.19 mmol/L,最大表观结合量Bmax1 = 83.87 μmol/g。     

Synthesis and binding site characteristics of 2,4,6-trichlorophenol-imprinted polymers

2,4,6-Trichlorophenol (2,4,6-TCP)-imprinted micro- and submicrospheres prepared by precipitation polymerization were compared with templated materials obtained by conventional bulk polymerization. The influence of the type and amount of functional monomer, the type and amount of cross-linker, polymerization temperature, porogen, and the ratio of template molecule and functional monomer to cross-linker on the size of the obtained particles were investigated. UV-Vis spectrophotometer experiments revealed that the microsphere polymers provided higher affinity to the template in contrast to imprinted polymers prepared by bulk polymerization. The binding properties of the microspheres, including binding isotherms and affinity distribution, were studied via Freundlich isotherm affinity distribution (FIAD) analysis. The obtained results indicated that microspheres prepared by precipitation polymerization provided superior rebinding properties during equilibrium binding in contrast to bulk polymers and submicrosphere polymers. Moreover, release experiments showed that 80% of rebound 2,4,6-TCP was released from the imprinted microspheres within the first 2 h, while more intimately bound 2,4,6-TCP molecules were released in the following 40 h. The morphologies and porosities of the resulting imprinted materials were characterized by scanning electron microscopy (SEM) and Brunauer-Emmett-Teller (BET) analysis, respectively. The microsphere polymers exhibited a regular spherical shape with a high degree of monodispersity to the corresponding bulk polymers. Furthermore, the micro- and submicrospheres were characterized by narrow distribution of pores in contrast to a heterogeneity index of m = 0.6647 for the microsphere imprinted polymer.     

烟嘧磺隆分子印迹微球的制备及其吸附性能的考察

采用沉淀聚合法制备了烟嘧磺隆(NS)分子印迹聚合物微球(NS-MIPMs)。以甲基丙烯酸(MAA)为功能单体、三甲氧基丙烷三甲基丙烯酸酯(TRIM)为交联剂、偶氮二异丁腈(AIBN)为引发剂、氯仿为致孔剂在60 ℃下加热引发聚合。对分子印迹微球的聚合工艺进行了优化,当NS/MAA/TRIM/AIBN的物质的量比为1：4：4：1、致孔剂体积为90 mL时,制备的NS-MIPMs的吸附能力最强。利用紫外分光光度计研究了模板分子和功能单体间的作用机理。结果表明,在预聚合阶段,功能单体和模板分子间的主要作用形式是一个模板分子与一个功能单体发生作用。通过静态吸附实验及动力学吸附研究考察了NS-MIPMs的吸附性能,并结合Scatchard模型分析得到聚合物的最大结合量为11370.5 μg/g。将制备的分子印迹微球应用于固相萃取技术中,制备烟嘧磺隆分子印迹固相萃取(NS-MIPMs SPE)小柱,并对小柱进行淋洗条件的优化。同时建立了NS-MISPE-HPLC快速检测土壤中烟嘧磺隆残留量的分析方法,样品中的农药经乙腈和磷酸盐缓冲液提取,提取液经NS-MIPMs SPE小柱净化后进行HPLC分析。结果表明,烟嘧磺隆在0.01~1 mg/L范围内线性关系良好,相关系数为0.9986;添加水平为0.02~1 mg/kg时的回收率为82.2%~86.3%,相对标准偏差为1.9%~4.3%。该方法简单、高效、重现性好,可用于土壤中烟嘧磺隆的快速检测。     

磁性热敏聚合物微球的制备及磁感应控制释放行为

采用种子乳液聚合法在Fe3O4纳米粒子表面聚合包覆N-异丙基丙烯酰胺(NIPAM)与α-甲基丙烯酸(MAA)的共聚物,制备了磁性热敏聚合物微球Fe3O4/P(NIPAM-co-MAA).利用广角X射线衍射仪(WAXD)、透射电子显微镜(TEM)、zeta粒度仪(DLS)、热重分析(TGA)、振动样品磁力计(VSM)及比表面积测试仪(BET)等对微球的结构与形貌进行了表征,通过紫外-可见光分光光度法(UV-Vis)研究了微球对水溶性模型药物罗丹明B(RhB)的负载和磁感应控制释放行为.结果表明,微球粒径为80～200 nm,比表面积约为30.04m2/g,平均孔径约为24.50 nm;微球中聚合物含量约为73 wt%,磁粒子含量约为20 wt%,饱和磁感应强度为16.49 emu/g,其体积相转变温度(VPTT)约为37.5℃.RhB在微球中的装载量可以达到16.38 mg/g;在外加交变磁场作用下,RhB在模拟肠液和胃液中的磁感应释放量分别达到10.47和13.02 mg/g.     

种子溶胀悬浮聚合法制备香草醛分子印迹聚合物微球

以分散聚合法制备的聚苯乙烯微球为种子,采用单步溶胀悬浮聚合法,香草醛为模板分子,甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,在水相中成功制备了分子印迹聚合物微球,通过扫描电镜、静态吸附和高效液相色谱手段对其进行表征。结果表明,该微球对香草醛具有较高的吸附能力和良好的特异选择性,用于液相色谱固定相可将其与结构类似物阿魏酸快速基线分离。     

Facile synthesis of hollow polymeric microparticles possessing various morphologies via seeded polymerization

In this paper, hollow poly(styrene-co-divinylbenzene-co-methacrylic acid) microparticles possessing various morphologies were synthesized by a combination of seeded polymerization and SPG membrane emulsification. Three families of polystyrene (PS) microspheres with various molecular weights but similar diameters were fabricated by SPG membrane emulsification. These PS microspheres were used as seeds to investigate the effect of their molecular weight on the phase separation between the PS seeds and microgel-like networks formed during seeded polymerization and on the morphologies of the resultant particles. Our study revealed that three resultant microparticles possessed diameters of ca. 10?μm and hollow cavities. The shell thickness of the particles became thinner as M _w increased from 3.5?×?10⁴ to 28.0?×?10⁴. The morphological evolution of the microparticles during seeded polymerization was monitored, and these results verified the influence of the molecular weight of the PS seeds on the phase separation behavior and hence the morphologies of the resultant particles.     

罗丹明B分子印迹聚合物微球的合成及其在固相萃取中的应用

以罗丹明B为模板分子,丙烯酰胺为功能单体,乙二醇二甲基丙烯酸酯为交联剂,采用沉淀聚合法制备了罗丹明B分子印迹聚合物(MIP)微球,并用扫描电子显微镜表征。 采用紫外分光光度法测定了印迹分子罗丹明B与功能单体丙烯酰胺二者之间的结合常数(K=5.303×103 (mol/L)-1)和化学计量比(n=1)。 考察了沉淀剂的种类和用量对聚合物微球的影响。 将分子印迹聚合物微球应用于固相萃取材料自制固相萃取柱,从加标罗丹明B的红椒粉中萃取罗丹明B。 本文优化了固相萃取条件,高效液相色谱检测表明,在一定的萃取条件下,分子印迹聚合物对加标量为0.479 mg/kg的辣椒中罗丹明B的萃取加标回收率可达91.7％～103.5%。     

Synthesis and evaluation of molecularly imprinted polymeric microspheres for highly selective extraction of an anti-AIDS drug emtricitabine

The molecularly imprinted polymeric microspheres (MIPMs, 3～5 μm), used as high-performance liquid chromatography (HPLC) and solid-phase extraction (SPE) packing materials for anti-AIDS drug emtricitabine (FTC), were synthesized by precipitation polymerization. The effects of ratio of chloroform to acetonitrile on the morphology and diameter of MIPMs were investigated. The prepared MIPMs were characterized by HPLC. The imprinting factor (2.26) suggests that the resultant MIPMs exhibit good recognition and affinity to FTC. In addition, the MIPMs were used in SPE as packing material for separation and enrichment of FTC. The recovery of FTC on MIPMs cartridge was 97.6 % in standard solution. Finally, the MIPMs cartridge was applied to extract the FTC in human serum samples. Impurities in sample have been mostly removed, and the average recovery of 92.5 % was obtained with a detection limit of 0.005 μg/mL and a linear range of 0.02～4.0 μg/mL. The method established can be used to monitor the FTC in human serum sample with good accuracy and selectivity.     

Synthesis of monodisperse poly(methacrylic acid) microspheres by distillation-precipitation polymerization

Monodisperse poly(methacrylic acid) (PMAA) microspheres were prepared by distillation-precipitation polymerization in acetonitrile with 2,2′-azobisisobutyronitrile (AIBN) as initiator. The polymeric microspheres were formed simultaneously via a precipitation polymerization manner during the distillation of the solvent out of the reaction system in the absence of any surfactant and crosslinker. Monodisperse PMAA microspheres with spherical shape and smooth surface were synthesized with diameters ranging from 60 to 290 nm below the glass transition temperature of PMAA without any stabilizer. The particle size increased with increasing monomer concentration, which may be resulted from the higher molecular weight for the polymerization. To investigate the growth procedure of PMAA microspheres, the morphology of microspheres over the distillated acetonitrile volume was conducted by monitoring the morphologies with TEM. GPC and FTIR provide key insights into the particle growth mechanism. The PMAA microspheres may be formed by an internal contraction due to the marginal solvency of the continuous phase with the aid of the hydrogen-bonding interaction between the carboxylic acid unit, in which the particles were stabilized by the steric effect of the pendent chains and surface gel as well as the electrostatic repulsion from the carboxylic acid group.     

Narrow-disperse Highly Cross-linked “Living” Polymer Microspheres by Two-stage Precipitation Polymerization

Narrow-disperse, surface-functionalized "living" polymer microspheres with uniformly cross-linked structures were prepared by two-stage precipitation copolymerization of styrene and divinylbenzene. The two-stage precipitation polymerization is composed of an initial conventional precipitation polymerization for the nucleation followed by a reverse atom transfer radical polymerization(reverse ATRP) for the controlled polymerization process. The polymerization parameters(including reaction time for the first stage, AIBN amount and monomer loading) have been studied to show significant influences on the morphologies. Moreover, narrower size distribution and an ATRP initiator-functional surface of resulting particles can be obtained by applying reverse ATRP to conventional precipitation polymerization in the second stage. Furthermore, the "livingness" of the resulting polymer microspheres was testified by their surface modification of poly[2-(dimethylamino) ethyl methacrylate](PDMAEMA) brushes via surface-initiated ATRP(SI-ATRP).