Preparation of 1,1-disubstituted silacyclopentadienes

Several new 1,1-disubstituted siloles containing substituents on the ring carbon atoms have been synthesized. The new siloles: 1,1-dihydrido-2,5-bis(trimethylsilyl)-3,4-diphenylsilole (5), 1,1-dihydrido-2,5-dimethyl-3,4-diphenylsilole (6), 1,1-dimethoxy-2,5-bis(trimethylsilyl)-3,4-diphenylsilole (7), 1,1-bis(4-methoxyphenyl)-2,5-bis(trimethylsilyl)-3,4-diphenylsilole (8), 1,1-dipropoxy-2,5-bis(trimethylsilyl)-3,4-diphenylsilole (9), and 1,1-dibromo-2,5-bis(trimethylsilyl)-3,4-diphenylsilole (13) were prepared from reactions originating from the previously reported, 1,1-bis(diethylamino)-2,5-bis(trimethylsilyl)-3,4-diphenylsilole (1) or 1,1-bis(diethylamino)-2,5-dimethyl-3,4-diphenylsilole (2). In addition, three other new organosilane byproducts were observed and isolated during the current study, bis(4-methoxyphenyl)bis(phenylethynyl)silane (11), bis(4-methoxyphenyl)di(propoxy)silane (12) and 1-bromo-4-bromodi(methoxy)silyl-1,4-bis(trimethylsilyl)-3,4-diphenyl-1,3-butadiene (14). Compounds 13 and 14 were characterized by X-ray crystallography and 14 is the first 1,1-dibromosilole whose solid state structure has been determined.     

Electrochemical reduction of 1,1-dihalo-2,2-disubstituted cyclopropanes

The electrochemical reduction of 1,1-dihalo-2-R-2-methylcyclopropanes was studied by polarography and preparative electrolysis. A mixture of stereoisomeric monoboro- and monochlorocyclopropanes was obtained with preparative yield of 60–70% in preparative electroreduction in methanol against a background of 0.1 M LiClO₄. In the case of bromine derivatives of cyclopropanes (except when R = CN) an effect was found on the part of the current density on the ratio of cis and trans isomers, which was interpreted as a change, in dependence on current density, of the contributions of the reactions of reduction of the starting compounds (S_N2 mechanism) and ionic pairs (S_N1 mechanism). The effect of the solvent (CHCl₃, DMF, DMSO, MeOH) and background salt (LiClO₄, Et₄NBr) on the ratio of stereoisomers is in agreement with this interpretation.A. E. Arbuzov Institute of Organic and Physical Chemistry, Kazan Science Center, Russian Academy of Sciences, Kazan. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 9, pp. 2023–2032, September, 1992.     

Preparation of 2,5-disubstituted oxazoles from N-propargylamides

[reaction: see text] 2,5-Disubstituted oxazoles have been prepared through the reaction of N-propargylamides with aryl iodides in the presence of Pd(2)(dba)(3), tri(2-furyl)phosphine, and NaO(t)()Bu. The reaction appears to proceed through a palladium-catalyzed coupling step followed by the in situ cyclization of the resultant coupling product.     

Intermolecular alkyne hydroaminations involving 1,1-disubstituted hydrazines

[reaction: see text] Two readily prepared catalysts have been developed for the hydroamination of alkynes by 1,1-disubstituted hydrazines. The catalyses are facile with terminal alkynes and some internal alkynes. If the hydrazine bears an aryl group, Fischer cyclization can occur in a one-pot procedure. In addition, reactions with acetylene to produce a plethora of hydrazones are described. Catalytic reactions involving acetylene and substituted hydrazines are complete in less than 2 h at room temperature and 1 atm of pressure.     

Efficient oxidative coupling of 2,6-disubstituted phenol catalyzed by a dicopper(II) complex

Complexation of a rigid multi-pyridine ligand bis(2-pyridyl)-1,8-naphthyridine (bpnp) with [Cu(2)(TFA)(4)] (TFA = trifluoroacetate) resulted in the formation of a dinuclear copper(II) complex, namely [Cu(2)(bpnp)(μ-OH)(TFA)(3)] (1). This complex has been characterized by X-ray crystallographic, spectroscopic and elemental analyses. Complex 1 is an efficient catalyst for the oxidative coupling of various 2,6-disubstituted phenols with molecular oxygen. Yields and selectivity depend on the reaction conditions employed, the best results being obtained in isopropanol or dioxane at 90 °C with yields of >99%. Mechanistic pathway of the catalysis is discussed.     

Organolanthanide-catalyzed intramolecular hydroamination/cyclization of amines tethered to 1,2-disubstituted alkenes

[reaction: see text] This contribution reports the organolanthanide-catalyzed intramolecular hydroamination/cyclization of amines tethered to 1,2-disubstituted alkenes to afford the corresponding mono- and disubstituted pyrrolidines and piperidines by using coordinatively unsaturated complexes of the type (eta(5)-Me(5)C(5))(2)LnCH(TMS)(2) (Ln = La, Sm), [Me(2)Si(eta(5)-Me(4)C(5))(2)]NdCH(TMS)(2), [Et(2)Si(eta(5)-Me(4)C(5))(eta(5)-C(5)H(4))]NdCH(TMS)(2), and [Me(2)Si(eta(5)-Me(4)C(5))((t)()BuN)]LnE(TMS)(2) (Ln = Sm, Y, Yb, Lu; E = N, CH) as precatalysts. [Me(2)Si(eta(5)-Me(4)C(5))((t)BuN)]LnE(TMS)(2) mediates intramolecular hydroamination/cyclization of sterically demanding amino-olefins to afford disubstituted pyrrolidines in high diastereoselectivity (trans/cis = 16/1) and in good to excellent yield.     

A facile synthesis of symmetrical 1,1-disubstituted ethylenes

The reaction of ethyl trimethylsilylacetate with two equivalents of a Grignard reagent in ether followed by treatment with acid gives 1,1-disubstituted ethylenes in excellent yield.     

Structures, electronic states, photoluminescence, and carrier transport properties of 1,1-disubstituted 2,3,4,5-tetraphenylsiloles

The excellent electroluminescent (EL) properties of 1,1-disubstituted 2,3,4,5-tetraphenylsiloles, 1-methyl-1,2,3,4,5-pentaphenylsilole (MPPS), and 1,1,2,3,4,5-hexaphenylsilole (HPS) have been found. Despite some studies devoted to these materials, very little is known about the real origin of their unique EL properties. Therefore, we investigated the structures, photoluminescence (PL), and charge carrier transport properties of 1,1-disubstituted 2,3,4,5-tetraphenylsiloles as well as the effect of substituents on these characteristics. The single crystals of the three siloles involving 1,1-dimethyl-2,3,4,5-tetraphenylsilole (DMTPS), MPPS, and HPS were grown and their crystal structures were determined by X-ray diffraction. Three siloles have nonplanar molecular structures. The substituents at 1,1-positions enhance the steric hindrance and have predominant influence on the twisted degree of phenyl groups at ring carbons. This nonplanar structure reduces the intermolecular interaction and the likelihood of excimer formation, and increases PL efficiency in the solid state. The silole films show high fluorescence quantum yields (75-85%), whereas their dilute solutions exhibit a faint emission. The electronic structures of the three siloles were investigated using quantum chemical calculations. The highest occupied molecular orbitals (HOMOs) and the lowest unoccupied molecular orbitals (LUMOs) are mainly localized on the silole ring and two phenyl groups at 2,5-positions in all cases, while the LUMOs have a significant orbital density at two exocyclic Si-C bonds. The extremely theoretical studies of luminescent properties were carried out. We calculated the nonradiative decay rate of the first excited state as well as the radiative one. It is found that the faint emission of DMTPS in solutions mainly results from the huge nonradiative decay rate. In solid states, molecular packing can remarkably restrict the intramolecular rotation of the peripheral side phenyl ring, which has a large contribution to the nonradiative transition process. This explains why the 1,1-disubstituted 2,3,4,5-tetraphenylsiloles in the thin films exhibit high fluorescence quantum yields. The charge carrier mobilities of the MPPS and HPS films were measured using a transient EL technique. We obtained a mobility of 2.1 x 10(-)(6) cm(2)/V.s in the MPPS film at an electric field of 1.2 x 10(6) V/cm. This mobility is comparable to that of Alq(3), which is one of the most extensively used electron transport materials in organic light-emitting diodes (LEDs), at the same electric field. The electron mobility of the HPS film is about approximately 1.5 times higher than that of the MPPS film. To the best of our knowledge, this kind of material is one of the most excellent emissive materials that possess both high charge carrier mobility and high PL efficiency in the solid states simultaneously. The excellent EL performances of MPPS and HPS are presumably ascribed to these characteristics.     

FOX-7 (1,1-diamino-2,2-dinitroethene): trapped by copper and amines

Syntheses of the first Cu(NH(3))(2)(FOX)(2) and various Cu(amine)(2)(FOX)(2) (methyl, propyl, and dimethyl amine) complexes were achieved by using metathetical reactions which add a new chapter to the metal chemistry of FOX-7 (1,1-diamino-2,2-dintroethene). The crystal structures of Cu(NH(3))(2)(FOX)(2) and Cu(C(3)H(7)NH(2))(2)(FOX)(2) which show square planar geometry at copper aid in the understanding of the bonding modes in FOX-7 copper complexes which is supported by natural bond orbital (NBO) calculations. Water-free K-FOX was also structured.     

1,1-Diamino-2,2-dintroethene (FOX-7) in copper and nickel diamine complexes and copper FOX-7

1,1-Diamino-2,2-dinitroethene (FOX-7) reacts readily with copper nitrate in an aqueous solution of potassium hydroxide to form pea green Cu(FOX)(2)(H(2)O)(2) (5). FOX-7 complexes of copper and nickel supported by a variety of diamines including Cu(en)(2)(FOX)(2)(H(2)O) (1), Cu(pn)(2)(FOX)(2) (2), Cu(bipy)(FOX)(2)(H(2)O)(4) (3a), Cu(bipy)(2)(FOX)(2)(H(2)O)(2.5) (3b), Cu(bipy)(FOX)(2)(DMSO)(2)·2DMSO (3c), Cu(phen)(3)(FOX)(2)(H(2)O)(3) (4), (Ni)(2)(phen)(6)(FOX)(4)(NO(3))(3)(H(2)O)(2) (6), and Ni(bipy)(3)(FOX)(2)(H(2)O)(4) (7a) were obtained via metathesis reactions with potassium-FOX (K-FOX). Surprisingly FOX-7, in the presence of Ni(II) and bipyridyl in a mixed solvent of methanol and dimethyl sulfoxide, gave a chelated FOX carbamate anion resulting in the compound Ni(bipy)(2)(FOX-CO(2))·(DMSO) (7b). All metal salts were characterized by infrared, elemental analysis, and differential scanning calorimetry (DSC). Single-crystal X-ray diffraction structures were obtained for compounds 1, 2, 3c, 6, and 7b.     

Formation of 1,2-dioxanes by electron-transfer photooxygenation of 1,1-disubstituted ethylenes

Electron-rich 1,1-diarylethylenes (1a–e) afford 3,3,6,6-tetraaryl-1,2-dioxanes (3a–e) in high yields (>907%) when subjected to electron-transfer photooxygenation in the presence of DCA. Whereas 1,1-diphenyl-ethylene (1f) and 1,1-di(p-chlorophenyl)ethylene (1h) yield the 1,2-dioxanes 3f and 3h at 30% and less than 10%, respectively, there is negligible (if any) 1,2-dioxane formation with 1,1-di(m-anisyl)ethylene (1i). 1,2-Dioxane formation proceeds in a chain reaction (Scheme 1). N-Vinylcarbazol (1g), however, yields the 1,2-dioxane 3g via the cyclobutane derivative 7 (Scheme 2).     

Metal complexes from 1,1'-di(pyrazinyl)ferrocene: coordination polymers and bridged diferrocenes

Ferrocene-based ligands 1,1'-di(pyrazinyl)ferrocene (L1) and 1,1'-di(2-pyrimidinyl)ferrocene (L2) were synthesized and copper and silver complexes were obtained from L1. Coordination polymers [{Cu(2)(PhCOO)(4)}(L1)](n) (1), [{Cu(2)(C(5)H(11)COO)(4)}(L1)](n) (2), and [{Cu(2)(OAc)(4)}(L1)](n).0.5n[Cu(2)(OAc)(4)(H(2)O)(2)].1.5nCH(3)CN (3) resulted from the reaction with the corresponding copper carboxylates. In all three complexes, L1 links the dinuclear copper carboxylate units to form one-dimensional step-like chains. In 2, these chains are further linked by [Cu(2)(OAc)(4)(H(2)O)(2)] dinuclear units via hydrogen bonding to form sheet structures. The reaction of L1 with copper(I) iodide resulted in a multinuclear complex [(CuI)(4)(L1)(2)].(L1) (4), which contains a [(CuI)(4)(L1)(2)] diferrocene unit with a step-like (CuI)(4) core. Reactions of L1 with silver(I) salts resulted in silver-bridged diferrocenes [Ag(2)(L1)(2)]X(2) (X = ClO(4) (5a, b), NO(3) (6a-c) and PF(6) (7)), some of which incorporate aromatic solvents into their crystal lattices. The intramolecular Ag...Ag separations in these metallamacrocycles (3.211-3.430 A) depended upon the counter-anions and on the coordination mode of the silver ions. In all of these coordination complexes, L1adopts a synperiplanar eclipsed conformation and acts as a bidentate ligand, with only the 5-nitrogen of each pyrazine ring involved in coordination.     

Synthesis of 1,1-disubstituted alkenes via a Ru-catalyzed addition.

The synthesis of 1,1-disubstituted alkenes typically involves reactions that lack atom economy such as olefination protocols. The use of various ruthenium complexes to effect the addition of terminal alkynes to alkenes is explored as an atom economical strategy. Two new ruthenium complexes have been discovered that effect this reaction at ambient temperature, cyclopentadienylruthenium (triphenylphosphine) camphorsulfonate and cyclopentadienylruthenium tris(acetonitrile) hexafluorophosphate. Using these complexes as catalysts, reactions proceed at ambient temperature in acetone or DMF, respectively. Regioselectivity favoring the formation of a 1,1-disubstituted over a 1,2-disubstituted alkene typically ranges from 9:1 to >25:1. The reaction demonstrates extraordinary chemoselectivity-even di- and trisubstituted alkenes such as present in the products do not compete with the starting monosubstituted alkene. Free hydroxyl groups as well as silyl and PMB ethers are tolerated as are ketones, esters, and amides. The mechanism of the reaction is believed to invoke formation of a metallacyclopentene. To account for the chemo- and regioselectivity, the initial formation of the metallacycle is believed to be reversible. While formation of the 2,5-disubstituted ruthenacyclopentene, which produces the linear product, is believed to be kinetically preferred, the rate of beta-hydrogen elimination from the 2,4-disubstituted ruthenacyclopentene, which produces the branched product, is believed to be faster. Thus, the competition between the rate of beta-hydrogen elimination and cycloreversion rationalizes the results.     

Facile carbon-fluorine bond activation and subsequent functionalisation of 1,1-difluoroethylene and tetrafluoroethylene promoted by adjacent metal centres

The bridging fluoroolefin ligands in the complexes [Ir(2)(CH(3))(CO)(2)(μ-olefin)(dppm)(2)][OTf] (olefin = tetrafluoroethylene, 1,1-difluoroethylene; dppm = μ-Ph(2)PCH(2)PPh(2); OTf(-) = CF(3)SO(3)(-)) are susceptible to facile fluoride ion abstraction. Both fluoroolefin complexes react with trimethylsilyltriflate (Me(3)SiOTf) to give the corresponding fluorovinyl products by abstraction of a single fluoride ion. Although the trifluorovinyl ligand is bound to one metal, the monofluorovinyl group is bridging, bound to one metal through carbon and to the other metal through a dative bond from fluorine. Addition of two equivalents of Me(3)SiOTf to the tetrafluoroethylene-bridged species gives the difluorovinylidene-bridged product [Ir(2)(CH(3))(OTf)(CO)(2)(μ-OTf)(μ-C=CF(2))(dppm)(2)][OTf]. The 1,1-difluoroethylene species is exceedingly reactive, reacting with water to give 2-fluoropropene and [Ir(2)(CO)(2)(μ-OH)(dppm)(2)][OTf] and with carbon monoxide to give [Ir(2)(CO)(3)(μ-κ(1):η(2)-C≡CCH(3))(dppm)(2)][OTf] together with two equivalents of HF. The trifluorovinyl product [Ir(2)(κ(1)-C(2)F(3))(OTf)(CO)(2)(μ-H)(μ-CH(2))(dppm)(2)][OTf], obtained through single C-F bond activation of the tetrafluoroethylene-bridged complex, reacts with H(2) to form trifluoroethylene, allowing the facile replacement of one fluorine in C(2)F(4) with hydrogen.     

Rh-catalyzed asymmetric hydroformylation of functionalized 1,1-disubstituted olefins

The first method for the highly enantioselective rhodium-catalyzed hydroformylation of 1,1-disubstituted olefins has been developed. By employing either of the P-chirogenic phosphine ligands BenzP* and QuinoxP*, linear aldehydes with β-chirality can be prepared in a highly enantioselective fashion with good chemo- and regioselectivities.     

High precision NMR study of 1,1-disubstituted silacyclobutanes

The hydrogen NMR spectra of 1,1-dimethyl-, 1,1-dichloro-, 1,1-dimethoxy- and 1,1-difluoro-silacyclobutane have been analysed. A new correlation NMR instrumental technique has been used to obtain spectral parameters with very high precision.     

1-Hydroxy-ethylidene-1,1-diphosphonic acid as a titrimetric agent

1-Hydroxy-ethylidene-1,1-diphosphonic acid (HEDPHA) has been proposed as a highly selective titrimetric reagent for thorium. In the presence of 1,2-diaminocyelohexanetetra-acetic acid (DCTA) a soluble binuclear ternary complex, Th(2)(DCTA)(2)(HEDPHA), is formed. The determination of thorium is carried out in a slightly acidic medium, buffered with urotropine, with 0.025M HEDPHA, and Xylenol Orange as indicator. DCTA masks all bivalent metals, rare earths, scandium, yttrium, bismuth, iron, gallium and indium. Only zirconium, titanium, aluminium and large amounts of thallium(III) interfere.     

New 1,3-disubstituted ferrocene

The reaction of sodium (ethoxycarbonyl)cyclopentadienide [C₅H₄(CO₂Et)]Na (1) with the salt [MeC(NMe₂)(OMe)][MeSO₄] leads to the substituted pentafulvene 1,3-(Me₂NCMe)-(CO₂Et)C₅H₃. Its photochemical reaction with iron-naphthalene complex [CpFe(C₁₀H₈)PF₆] gives homoannularly 1,3-disubstituted ferrocene {1,3-(CO₂Et)(COMe)C₅H₃}Fe(C₅H₅).