驱油用聚丙烯酰胺分子量测试的光散射研究

利用旋转流变仪分析了超高分子量部分水解聚丙烯酰胺溶液的流变性质,并根据光散射动态模式分析了其在不同浓度和不同盐离子浓度下的尺寸分布.建立了利用多角度激光光散射准确测量驱油用超高分子量聚丙烯酰胺重均分子量(Mw)、均方根回转半径()和第二位力系数值(A2)的方法.准确测量了商品化驱油用超高分子量聚丙烯酰胺FP3630S的这3个参数,分别为Mw=(1.33±0.06)×107,     

聚N-异丙基丙烯酰胺接枝聚苯乙烯高分子刷的构象

当长链高分子高密度接枝到一个表面上时,由于分子链间的相互作用使得接枝的高分子链扩张而形成伸直链的构象,这种形态被称为高分子刷.     

超高分子量聚丙烯酰胺的表征

采用环己烷及乳化剂ＥＡ合成了分子量（■≥１２００万）的速溶型、粉状聚丙烯酰胺（ＰＡＡ），采用扫描电镜及透射电镜观察了其微细结构，对其速溶性作出了解释。给出了该产品的综合性能数据，与进口样品进行了对比。     

激光光散射研究丙烯酰胺丙烯酸共聚物的溶液行为

用激光光散射技术研究了丙烯酰胺 丙烯酸共聚物 (简称P(AM AA) )的溶液行为 .结果表明 ,纯水中P(AM AA)分子的流体力学半径Rh的分布存在 10 0～ 5 0 0nm的范围 ,与溶液中的网状结构对应 .当加入NaCl后 ,Rh 分布变窄 ,集中在 10 0nm以下的范围内 ,10 0～ 5 0 0nm这一范围消失 ,说明P(AM AA)在纯水溶液中主要以网状结构存在 ,小分子盐如NaCl的加入会破坏这种网状结构 .网状结构的破坏导致溶液稳定性下降 ,在0 1mol LNaCl溶液中 ,当c c 时 ,放置一段时间后 ,溶液中出现白色絮状沉淀 .     

驱油用聚丙烯酰胺分子量分布的表征和测定方法

驱油用聚丙烯酰胺的分子量分布是评价聚合物的重要指标之一,对聚合物驱油效果有重要的影响。目前测定驱油用聚丙烯酰胺分子量分布的主要方法有光散射法、凝胶渗透色谱法、凝胶渗透色谱法联用技术和流变法等。对这几种常用的分析方法做了详细介绍,对比分析了它们的特点和适用范围,对这些方法和技术做了展望。光散射法多为研究所用。凝胶渗透色谱法比较简单且实验精确度比较高。凝胶渗透色谱联用技术不仅拓宽了测定范围而且提高了灵敏度,但是应用凝胶渗透色谱测量聚合物分子量分布仍有大量研究工作。流变法省却了溶解聚合物的步骤,解决了高分子量及长链支化度聚合物的测试灵敏度不高的问题,具有比较广阔的发展前景。     

聚N-异丙基丙烯酰胺溶液的粘度的温度依赖关系

用自由基聚合法合成了聚Ｎ 异丙基丙烯酰胺（ＰＮＩＰＡＡＭ）样品，用乌氏粘度计考查了该聚合物的四氢呋喃（ＴＨＦ）溶液和水溶液的粘度与温度的依赖关系．发现ＰＮＩＰＡＡＭ ＴＨＦ体系的特性粘数随温度升高而增大，ＰＮＩＰＡＡＭ Ｈ２Ｏ体系的特性粘数 温度曲线表现出较为复杂的变化规律．并用实验确定的特性粘数对合成样品的分子量进行了表征Ｍｎ＝８４４×１０５ｇ·ｍｏｌ－１．     

电子显微镜方法测定聚丙烯酰胺的分子量及分子量分布

用电子显微镜研究了聚丙烯酰胺的形态结构。将聚合物溶于正丙醇/水的混合溶剂中,用喷雾的方法制得单分子球粒,用电镜测定球柱尺寸,计算其数均,重均分子量及分子量分布。并讨论了沉淀剂/溶剂比例、溶液浓度及喷雾方法对所得结果的影响。     

聚(N-异丙基丙烯酰胺)类热敏材料的研究进展

从均聚物、共聚物及接枝改性三方面对聚（Ｎ－异丙基丙烯酰胺）类热敏高分子材料的最新研究进展进行了综述。简述了其热敏机理以及这种热敏材料在生物医学工程中的应用。     

Synthesis and Characterization of Thermo-responsive Poly(N-vinyl-2-pyrrolidinone)-block-poly(N-isopropylacrylamide) Micelles

A novel thermo-responsive diblock copolymer of poly(N-vinyl-2-pyrrolidinone)-block-poly(N-isopropylacrylamide) (PNVP-b-PNIPAM) was synthesized. FT-IR, ¹H-NMR and SEC results confirmed the successful synthesis of PNVP-b-PNIPAM diblock copolymer via anionic polymerization. The polymeric micelles formed from PNVP-b-PNIPAM copolymer in aqueous solution were developed and characterized as a potential thermo-responsive and biocompatible drug delivery system. Micellization of the diblock copolymer in aqueous solution was characterized by dynamic laser scattering (DLS), turbidity measurement, tension measurement and transmission electron microscopy (TEM). The thermo-responsive polymeric micelles with the size ranges of 200 to 260 nm and thickness of 30 nm are localized, selected and targeted for drug release, having a great potential in response to external-stimulus such as temperatures from 35 to 39°C. The critical micellization concentration (cmc) of PNVP-b-PNIPAM in aqueous solution is 0.0026 wt% determined by turbidity measurement. The size of micelles determined by DLS increased from 163 to 329 nm with increasing concentration of PNVP-b-PNIPAM from 0.25 to 0.5 wt% in aqueous solution at 40°C, which is determined by DLS.     

端炔基对水溶液中聚(N-异丙基丙烯酰胺)相转变的影响

通过原子转移自由基聚合,制备出低分子量、窄分布、端炔基的线形聚(N-异丙基丙烯酰胺)(alkynylPNIPAM),利用高灵敏示差扫描微量热技术,在升—降温循环过程中确定端炔基对alkynyl-PNIPAM相转变行为的影响.结果显示,随循环次数增加,升温热容曲线明显变宽,降温热容曲线由双峰逐渐变为单峰;升温和降温的相转变温度有逐渐降低的趋势,但焓变的变化很小.聚合物的低的分子量使端基效应不可忽视,alkynylPNIPAM的端炔基可诱导分子链聚集,形成小的端基聚集体,由于这些聚集体中链内和链间氢键作用,链构象调整变得困难,导致PNIPAM链在升温时更易塌缩、降温时更难解离.     

温敏性纤维素/聚N-异丙基丙烯酰胺复合水凝胶的固体核磁共振表征及动力学研究

利用半互穿网络方法将具有温度响应的高分子聚N-异丙基丙烯酰胺(PNIPAM)与天然纤维素复合得到温敏性水凝胶. 通过固体核磁共振的 ¹H, ¹³C CP/MAS(交叉极化/魔角旋转)和QCP(定量交叉极化)等实验手段对复合凝胶的结构进行了定性及定量研究, 并利用固体静态变温核磁共振实验和偶极滤波-自旋扩散实验研究了复合凝胶中PNIPAM分子链段的动力学行为.     

Preparation of Hollow Silica Microspheres via Poly(N-isopropylacrylamide)

Core-shell structured SiO₂/poly(N-isopropylacrylamide) (SiO₂/PNIPAM) microspheres were successfully fabricated through hydrolysis and condensation reaction of tertraethyl or-thosilicate (TEOS) on the surface of PNIPAM template at 50 oC. The PNIPAM template can be easily removed by water at room temperature so that SiO₂ hollow microspheres were finally obtained. The transmission electron microscope and scanning electron microscope observations indicated that SiO₂ hollow microspheres with an average diameter of 150 nm can be formed only if there are enough concentration of PNIPAM and TEOS, and the hy-drolysis time of TEOS. FTIR analysis showed that part of PNIPAM remained on the wall of SiO₂ because of the strong interaction between PNIPAM and silica. This work provides a clean and efficient way to prepare hollow microspheres.     

PNIPA和PDEA在水-甲醇混合溶剂中性质的研究

分别研究了聚N-异丙基丙烯酰胺（PNIPA）和聚N,N-二乙基丙烯酰胺（PDEA）在水-甲醇混合溶剂中的溶液性质.结果表明,在PDEA和PNIPA体系中均存在水和甲醇分子之间的复合.由于PDEA比PNIPA的亲脂性强,在水-甲醇混合溶剂中,水与甲醇分子形成的复合物对PDEA和PNIPA的溶剂化作用不同,导致随着体系中甲醇体积分数（φ）的增大,PNIPA体系的低临界溶解温度（TLCS）发生了再进入相转变,而PDEA体系的TLCS则逐渐升高.     

The Effect of Number of Arms on the Aggregation Behavior of Thermoresponsive Poly(N-isopropylacrylamide) Star Polymers

The thermoresponsive nature of aqueous solutions of poly(N-isopropylacrylamide) (PNIPAAM) star polymers containing 2, 3, 4, and 6 arms has been investigated by turbidity, dynamic light scattering, rheology, and rheo-SALS. Simulations of the thermosensitive nature of the single star polymers have also been conducted. Some of the samples form aggregates even at temperatures significantly below the lower critical solution temperature (LCST) of PNIPAAM. Increasing concentration and number of arms promotes associations at low temperatures. When the temperature is raised, there is a competition between size increase due to enhanced aggregation and a size reduction caused by contraction. Monte Carlo simulations show that the single stars contract with increasing temperature, and that this contraction is more pronounced when the number of arms is increased. Some samples exhibit a minimum in the turbidity data after the initial increase at the cloud point. The combined rheology and rheo-SALS data suggest that this is due to a fragmentation of the aggregates followed by re-aggregation at even higher temperatures. Although the 6-arm star polymer aggregates more than the other stars at low temperatures, the more compact structure renders it less prone to aggregation at temperatures above the cloud point.     

聚(N-异丙基丙烯酰胺)类材料的应用

聚(N-异丙基丙烯酰胺)(PNIPAAm)及其共聚物,在水溶液中表现出最低临界溶液温度(LCST),在LCST附近会发生可逆相转变。利用这种特性,可将热敏性高分子材料应用于生物医学工程、免疫分析、催化、分离提纯等领域。主要综述了热敏性PNIPAAm类高分子材料,在这些领域中的应用情况。     

Concentration of Whey Proteins by Using Temperature-Sensitive Polymer Gel Poly(N-isopropylacrylamide)

Summary: In this work, the use of a temperature-sensitive polymer gel, poly(N-isopropylacrylamide), for the concentration of whey proteins was studied. The studied variables were: gel mass/solution volume ratio and concentration temperature. The concentration percentage and the selectivity were determined. The gel 20 × 5 (20% w/w total monomer/solution and 5% w/w crosslinking agent/total monomer), contacted with whey proteins solutions, at 5 °C and at 20 °C, was capable of concentrating the solution, in protein, from 10 to 33%, depending on the gel mass/solution volume ratio. The separation efficiencies, for the different studied systems, varied from around 40 to 80%. The results were discussed in the context of gels thermodynamics and through correlations between synthesis parameters and structure of the obtained gels. The obtained results for the concentration of whey proteins solutions, by using temperature-sensitive polymer gel, poly(N-isopropylacrylamide), showed that the Gel Process can indeed be used as an advantageous alternative for such separation, either from an economic or from an environmental view point.