Temperature-induced percolation behavior of AOT reverse micelles affected by poly(ethylene glycol)s

The influence of poly(ethylene glycol)s additives viz. mono- (EG), di- (DEG), tri- (TEG), tetra- (TeEG) and poly(ethylene glycol)-400 (PEG-400) on temperature-induced electrical percolation of water/AOT/isooctane microemulsion system has been investigated. The composition of microemulsion systems has been kept constant to omega=22 and [additive] = 0.1 M w.r.t. dispersion medium. The effect of increase in the non-polar continuum (S= [Oil]/[AOT]) is indicated by increase in the percolation threshold, theta(c). The findings have been elaborated in terms of validity of scaling laws in the light of the dynamic percolation theory. The activation energy of the process, DeltaEp, has been estimated from Arrhenius plots. Pseudophase concept of the micellar aggregation has been utilized to assess the thermodynamics of clustering of the nanodroplets. The state of trapped water in the micellar core and the corresponding interactions with the AOT head group has been visualized through 1H NMR and FTIR analysis. Results show that at higher omega (>16.0), encapsulated water behaves like free or the bulk water.     

Interaction of naphthalene‐labeled poly(hydrochloride quaternized 2‐norbornene‐5‐methyleneamine) with O/W microemulsion droplets

Interaction between naphthalene‐labeled poly(hydrochloride quaternized 2‐norbornene‐5‐methyleneamine), poly(HCQNBMA)/NA (luminophore), and quencher, emulsifier or coemulsifier in the aqueous or microemulsion media was studied by using steady‐state fluorescence measurements. Fluorescence experiments were carried out with poly(HCQNBMA)/NA dissolved in the aqueous solutions of ionic and nonionic emulsifiers, emulsifier/n‐hexane/water microemulsion (A) and emulsifier/n‐hexane/1‐pentanol/water microemulsion (B), respectively. The intensity of fluorescence emission of poly(HCQNBMA)/NA was much higher in the aqueous phase than in microemulsion. Furthermore, the aqueous solution of ionic emulsifier increased the monomer emission. The increase in the monomer emission can be ascribed to the shielding of the naphthalene (NA) groups by SDS micelles. This separates NA groups from each other, which depresses the deactivation of excited states. The strong decrease in monomer emission within the microemulsion media probably results from the elongated conformation structure of the polymer molecule, and higher conformation freedom of NA groups, which increases interaction between the probe and the quencher. The formation of nonfluorescence clusters is not ruled out. The quenching of NA emission by nitromethan (NM) is much stronger in microemulsion than in the aqueous phase, and the quenching is more pronounced for the low molecular weight 2‐norbornene‐5‐methoxylnaphthalene (NBMNA) than for its polymer. The extent of penetration of reactants into the interfacial layer governs quenching of hydrophobic NA probe by hydrophilic quencher. Furthermore, the quenching events are connected with the thickness and density of the interfacial layer, as well as its charge. The addition of coemulsifier (1‐pentanol) increases the total surface area of the microdroplets, the entry rate of reactants into the microdroplets, and the interaction of hydrophobic and hydrophilic reactants. The quenching events are more pronounced in the close packed o/w interfacial layer than in the loosely packed one. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 101–114, 2001     

On the temperature percolation in a w/o microemulsion in the presence of organic derivatives of chalcogens

The course of temperature percolation in a w/o microemulsion system comprising water/bis(2-ethylhexyl) sulfosuccinate sodium, AOT/isooctane affected by the presence of additives has been investigated. Additives, viz., organic derivatives of chalcogens including dipyridyl diselenide (Py2Se2), diphenyl diselenide (Ph2Se2), and dipyridyl ditelluride (Py2Te2), have been assimilated in the reverse micellar system. Formulations have been studied in terms of (i) the concentration variation of additives, (ii) the change in omega (= [H2O]/[AOT]), and (iii) the change in the nonpolar continuum, S (= [oil]/[AOT]). Phenyl derivatives hinder the percolation, whereas the pyridyl derivative in moderate amounts favors the phenomenon. The estimated values of the critical exponents are lower than those predicted by the dynamic percolation theory. The association model has been implemented to access the thermodynamic parameters of droplet clustering. Pyridyl compounds are expected to alter the rigidity of the surfactant monolayer, which could help to promote the attractive interdroplet interaction. FT-IR spectroscopy has been used to elucidate the changes occurring in the core water in the presence of organic derivatives of chalcogens as the droplet size is increased. Results have been rationalized in terms of the alteration in the physicochemical behavior of the water/AOT/isooctane microemulsion in the presence of additives.     

Kinetics of the Oxidation of Phenylhydrazine by [Fe(CN)6]3− in Water‐in‐Oil Microemulsions

The oxidation reaction of phenyl hydrazine (Phh) by hexacyanoferrate ([Fe(CN)₆]^3?) has been studied in water‐in‐oil (w/o) microemulsion media. The kinetic profile of the reaction was investigated as a function of [Phh], droplet size, and droplet concentration. Comparison of the kinetic profiles of the reaction in microemulsion, water‐urea, and water‐AOT‐urea media indicates that the kinetic profile of the reaction in microemulsion shows a behavior similar to that of the reaction in water‐AOT‐urea medium at 4 M urea. An initial increase and then a decrease in k_obs is observed with increasing molar ratio, W_o(=[H₂O]/[AOT]) at constant [AOT] (=0.4 M), whereas k_obs decreases upon increasing the AOT concentration at constant molar ratio.     

AOT/H2O/油微乳液体系的浊度、密度和微观结构

建立了通过精密测量密度、折射率和浊度研究微乳液滴微观性质的方法,获得水与表面活性剂的摩尔比r分别为10.5和12的AOT/H2O/甲苯微乳液体系液滴的微观结构及相互作用参数,得到AOT分子的长度L=1.07 nm,用液滴间的相互作用讨论了相变温度与r的关系.用L=1.07 nm,通过密度测量得到AOT/H2O/甲苯和AOT/H2O/环己烷两个微乳液体系不同r值下液滴的微观结构参数,与文献报导的数据吻合得很好.发现在微乳液滴中的水的密度明显大于自由水的密度,并随溶剂变化,而AOT分子的构型不变.     

AOT/H_2O/油微乳液体系的浊度、密度和微观结构

建立了通过精密测量密度、折射率和浊度研究微乳液滴微观性质的方法,获得水与表面活性剂的摩尔比r分别为10.5和12的AOT/H2O/甲苯微乳液体系液滴的微观结构及相互作用参数,得到AOT分子的长度L=1.07nm,用液滴间的相互作用讨论了相变温度与r的关系.用L=1.07nm,通过密度测量得到AOT/H2O/甲苯和AOT/H2O/环己烷两个微乳液体系不同r值下液滴的微观结构参数,与文献报导的数据吻合得很好.发现在微乳液滴中的水的密度明显大于自由水的密度,并随溶剂变化,而AOT分子的构型不变.     

Solvolysis of benzoyl halides in water/NH4DEHP/isooctane microemulsions

A study was carried out on the solvolysis reactions of different benzoyl halides in microemulsions of water/NH4DEHP/isooctane, where NH4DEHP is ammonium bis(2-ethylhexyl) phosphate. Because of the low solubility of benzoyl halides in water, they are distributed between the continuous medium and the interface of the microemulsion, where the reaction takes place. The application of the pseudophase model has allowed us to obtain the distribution constants and the rate constants at the interface for the benzoyl halides. Reaction mechanisms and the changes in these mechanisms in terms of the water content of the microemulsion have been determined on the basis of kinetic data. The influence of the substituent and the leaving group on the reaction rate has been investigated. A comparison of kinetic results with those previously obtained in water/AOT/isooctane microemulsions allows a kinetic evaluation of the change in the microemulsion properties with the surfactant.     

Molecular view of the anomalous acidities of Sn2+, Pb2+, and Hg2+

Experimental results taken from both the condensed and gaseous phase show that, when associated with water, the three dications Sn(2+), Pb(2+), and Hg(2+) exhibit a facile proton-transfer reaction. In the gas phase, no stable [M.(H(2)O)(n)](2+) ions are observed; but instead the cations appear to undergo rapid hydrolysis to give ions of the form M(+)OH(H(2)O)(n-1). A series of ab initio calculations have been undertaken on the structures and proton-transfer reaction profiles associated with the complexes [M.(H(2)O)(2,4)](2+), where M is one of Sn, Pb, Hg, and Ca. The latter has been used as a reference point both in terms of comparisons with previous calculations, and the fact that Ca(2+) is a very weak acid. The calculations show that for Sn(2+), Pb(2+), and Hg(2+), the only barriers to proton transfer are those associated with the movement of water molecules. In the gas phase, these barriers could be overcome through energy gained during ion formation, and in the condensed phase the thermal motion of water molecules would be sufficient. In contrast, the calculations show that for Ca(2+) it is the proton-transfer step that provides the most significant reaction barrier. Proton transfer in Sn(2+) and Pb(2+) is further assisted by distortions in the geometries of [M.(H(2)O)(2,4)](2+) complexes due to voids created by the 5s(2) (6s(2)) inert lone pair. For Hg(2+), ease of proton transfer is derived partly from the high degree of covalent bonding found in both the reactants and products.     

Physicochemical investigations of microemulsification of eucalyptus oil and water using mixed surfactants (AOT+Brij-35) and butanol

Microemulsification of a vegetable oil (eucalyptus) with single and mixed surfactants (AOT and Brij-35), cosurfactant of different lipophilicities (isomers of butanol), and water were studied at different surfactant and cosurfactant mixing ratios. The phase diagrams of the quaternary systems were constructed using unfolded and folded tetrahedron, wherein the phase characteristics of different ternary systems can be underlined. The microemulsion zone was found to be dependent upon the mixing ratios of surfactant and cosurfactant; the largest microemulsion zone was formed with 1:1 (w/w) S:CS. The effects of temperature and additives (NaCl, urea, glucose, and bile salts of different concentrations) on the phase behavior were examined. The mixed microemulsion system showed temperature insensitivity, whereas the Brij-35 (single) stabilized system exhibited a smaller microemulsion zone at elevated temperature. NaCl and glucose increased the microemulsion zone up to a certain concentration, beyond which the microemulsion zones were decreased. These additives decreased the microemulsion zones as temperature was increased. The effect of urea on microemulsion zone was found to be insignificant even at the concentration 3.0 mol dm(-3). Little effect on microemulsion zone was shown by NaC (sodium cholate) at 0.25 and 0.5 mol dm(-3) at different temperatures. The conductance of the single (AOT) and mixed microemulsion system (AOT+Brij-35) depends upon the water content and mixing ratios of the surfactants, and a steep rise in conductance was observed at equal weight percentages of oil and water. Viscosities for both single (AOT) and mixed (AOT+Brij-35) surfactant systems passed through maxima at equal oil and water regions showing structural transition. The viscosities for microemulsion systems increased with increasing Brij-35 content in the AOT+Brij-35 blend. Conductances and viscosities of different monophasic compositions in the absence and presence of additives (NaCl and NaC) were measured at different temperatures. The activation energy of conduction (DeltaE(cond)( *)) and the activation enthalpy for viscous flow (DeltaH(vis)( *)) were evaluated. It was found that both DeltaE(cond)( *) and DeltaH(vis)( *) were a function of the nature of the dispersion medium. Considering the phase separation point of maximum solubility, the free energy of dissolution of water or oil (DeltaG(s)(0)) at the microdispersed state in amphiphile medium was estimated and found to be a function of surfactant composition.     

Water in oil microemulsions as reaction media for a Diels-Alder reaction between N-ethylmaleimide and cyclopentadiene

The Diels-Alder reaction between N-ethylmaleimide and cyclopentadiene in water/AOT/isooctane microemulsions, where AOT denotes sodium bis(2-ethylhexyl)sulfosuccinate, was studied. The rate of the reaction was found to be higher than that obtained in pure isooctane, irrespective of the particular microemulsion composition used. The efficiency of this catalytic action ranged from a factor of 3 at low water contents (viz., W = [H2O]/[AOT] = 2) to 15 at W = 35. On the basis of these results, the reaction takes place simultaneously in the continuous medium and at the microemulsion interface. The favorable arrangement of the reactants at the interface results in more than 95% of the reaction occurring in this microenvironment. The kinetic analysis revealed the rate constant at the microemulsion interface to change with the water content. For small W values a bimolecular rate constant at the interface close to that observed in hexane was obtained. This value increases with W and for W > 20, a value close to that obtained in ethanol was found. This can be ascribed to the absence of hydrogen bonding at the microemulsion interface as well as the accelerating effects due to enforced hydrophobic interactions.     

Excited-state proton transfer of 2-(2'-pyridyl)benzimidazole in microemulsions: selective enhancement and slow dynamics in aerosol OT reverse micelles with an aqueous core

Excited-state proton transfer (ESPT) of 2-(2'-pyridyl)benzimidazole (2PBI) in reverse micelles has been studied by steady-state and time-resolved fluorescence spectroscopy. The nanometer sized water pool in the n-heptane/Aerosol OT (AOT)/water microemulsion is found to promote tautomer emission of this probe, as is evident from the emergence of a Stokes shifted band at 450 nm at the expense of the normal emission band on increasing the water content of the system. In the nonaquous microemulsion with a methanol core, the normal emission is quenched but no tautomer emission is obtained. With an acetonitrile core, there is no change in emission properties. Similarly, there is no evidence of ESPT in Triton X-100 reverse micelles. This indicates the requirement of ESPT to occur in microheterogeneous media; the medium should be a ternary system comprised of water and a hydrophobic phase separated by a negatively charged interface. In the microemulsions with an aqueous core, the fluorescence decays of 2PBI at the red end exhibit rise times of 0.8 ns and the time-resolved area-normalized emission spectra (TRANES) exhibit an isoemissive point, indicating slow dynamics of the two-state ESPT of 2PBI in aqueous AOT reverse micelles. The origin of the selective enhancement in AOT microemulsions as well as the slow dynamics is explored using fluorescence spectroscopic techniques, with support from quantum chemical calculation.     

A new ion sensor based on fiber optics

A fluorimetric ion sensor based on fiber optics has been developed that employs Rhodamine 6G hydrophobically and electrostatically "trapped" on a Nafion film. The sensor is based on the measurement of quenching or enhancement of the Rhodamine 6G fluorescence by various ions. It was found that ions such as Co(2+), Cr(3+), Fe(2+), Fe(3+), Cu(2+), Ni(2+) and NH(+)(4) rapidly quench the Rhodamine 6G fluorescence at an initial rate that depends on the concentration of the ion. This quenching is then readily reversed by the addition of "reverser" ions such as H(+), Li(+), Na(+), K(+), Ba(2+), Ca(2+), Mn(2+), Zn(2+) and Mg(2+). Again, the initial rate for the attainment of the original fluorescence was found to depend on the concentration of the reverser ion. Therefore, by monitoring the quenching directly the concentration of quencher ions can be determined. In addition, by loading the film with quencher and monitoring the initial rate of return towards the original baseline signal, it is possible to determine non-quenching ions.     

Partitioning of quencher ions in the micellar microenvironment of polyoxyethylene nonyl phenol

This paper has explored the quenching of fluorescence of the dye safranine T (ST) by the inorganic cations viz Cu2+, Co2+, Ni2+ and Mn2+ in micellar solutions of the surfactant dioxyethylene nonyl phenol (Igepal CO-210), pentaoxyethylene nonyl phenol (Igepal CO-520) and dodecaoxyethylene nonyl phenol (Igepal CO-720). The quenching results have been calculated in light of stern volmer equation (SV) to evaluate the extent of interaction between the fluorophore (ST) and quencher. The average concentration of the quencher ions in the micelle have been determined. The quenching efficiency of ST by inorganic ions in micellar medium is lower than that in aqueous medium. The results show that the ions get partitioned in the micellar medium. The values of the partition coefficient of the ions decrease with increase in HLB value and number of oxyethylene groups in Igepal.     

Influence of anionic surfactants on the electric percolation of AOT/isooctane/water microemulsions

A study was carried out concerning the influence of sodium alkyl sulfonates on the electric percolation of AOT/isooctane/water microemulsions ([AOT] = 0.5 M and W = [H2O]/[AOT] = 22.2). An important effect was observed with regard to the percolation temperature caused by the addition of small quantities of alkyl sulfonates (rho = [alkyl sulfonate]/[AOT] = 0.01). The short chain alkyl sulfonates (C3-C5) cause an increase in the percolation temperature, which in turn is reduced as we increase the chain length of the additive until we obtain a percolation temperature which is lower than that which is observed in the absence of an additive (C6-C8). For hydrocarbon chains of a greater length we can observe a new increase in the percolation temperature (C10-C18). This behavior has been explained as a consequence of (i) the incorporation of the additives at the interphase of the microemulsion and (ii) the geometric parameters of the different surfactants added to the microemulsion.     

Effect of metal ions (Li+, Na+, K+, Mg2+, Ca2+, Ni2+, Cu2+, and Zn2+) and water coordination on the structure and properties of L-arginine and zwitterionic L-arginine

Interactions between metal ions and amino acids are common both in solution and in the gas phase. The effect of metal ions and water on the structure of L-arginine is examined. The effects of metal ions (Li(+), Na(+), K(+), Mg(2+), Ca(2+), Ni(2+), Cu(2+), and Zn(2+)) and water on structures of Arg x M(H2O)m , m = 0, 1 complexes have been determined theoretically by employing the density functional theories (DFT) and using extended basis sets. Of the three stable complexes investigated, the relative stability of the gas-phase complexes computed with DFT methods (with the exception of K(+) systems) suggests metallic complexes of the neutral L-arginine to be the most stable species. The calculations of monohydrated systems show that even one water molecule has a profound effect on the relative stability of individual complexes. Proton dissociation enthalpies and Gibbs energies of arginine in the presence of the metal cations Li(+), Na(+), K(+), Mg(2+), Ca(2+), Ni(2+), Cu(2+), and Zn(2+) were also computed. Its gas-phase acidity considerably increases upon chelation. Of the Lewis acids investigated, the strongest affinity to arginine is exhibited by the Cu(2+) cation. The computed Gibbs energies DeltaG(o) are negative, span a rather broad energy interval (from -150 to -1500 kJ/mol), and are appreciably lowered upon hydration.     

Effects of polymer aggregation and quencher size on amplified fluorescence quenching of conjugated polyelectrolytes

The fluorescence of conjugated polyelectrolytes (CPEs) is efficiently quenched by low concentrations of quenchers with opposite charges. We have reported the close correlation between this amplified quenching phenomenon and CPE chain aggregation. In this paper, we further demonstrate the profound correlation between the fluorescence quenching efficiency, CPE chain aggregation, and quencher molecular size. Aggregation of a poly(phenylene ethynylene)-type CPE (PPE-CO2-) is induced by the addition of either water or Ca2+ to methanol solution, as indicated by absorption, fluorescence, dynamic light scattering, and fluorescence microscope measurements. For quencher ions with a small molecular size, such as methyl viologen (MV2+), either the loose (induced by the addition of Ca2+) or the compact (induced by the addition of water) CPE chain aggregates are beneficial to the fluorescence quenching. For quencher ions with large molecular size, such as tris(4,7-diphenyl-1,10-phenanthroline)ruthenium (Ru(dpp)32+), however, the loose chain aggregates are found to be favorable for quenching, while the quenching efficiency is lower for the compact polymer aggregates present in aqueous solution.     

水/AOT/正庚烷微乳体系中水结构的FT-IR研究

运用傅立叶变换红外光谱（ＦＴ－ＩＲ）对水／ＡＯＴ／正庚烷微乳体系中水的微结构进行了研究。结果表明，随着体系中加水量的增大，水分子Ｏ－Ｈ伸缩振动的红外光谱由３４９３ｃｍ＾－１向低频移动至３４１７ｃｍ＾－１，微乳体系中，水分子与ＡＯＴ分子的磺酸基作用的同时，与Ｎａ＾＋也有一定的作用，这两种离子对水分子Ｏ－Ｈ键的强度均有一定的影响，磺酸基的作用使水分子中Ｏ－Ｈ伸缩振动向高波数方向移动，而Ｎａ＾＋的作用与     

The interaction of boronic acid-substituted viologens with pyranine: the effects of quencher charge on fluorescence quenching and glucose response

The fluorescence sensing of several monosaccharides using boronic acid-substituted viologen quenchers in combination with the fluorescent dye pyranine (HPTS) is reported. In this two-component sensing system, fluorescence quenching by the viologen is modulated by monosaccharides to provide a fluorescence signal. A series of viologen quenchers with different charges were prepared and tested for their ability both to quench the fluorescence of HPTS and to sense changes in glucose concentration in aqueous solution at pH 7.4. Both quenching efficiency and sugar sensing were found to be strongly dependent upon viologen charge. The molar ratio between HPTS and each of the viologen quenchers was varied in order to obtain an optimal ratio that provided a fairly linear fluorescence signal across a physiological glucose concentration range. Both the quenching and sugar sensing results are explained by electrostatic interaction between dye and quencher.     

Compartmentalization of reactants in different regions of sodium 1,4-bis(2-ethylhexyl)sulfosuccinate/heptane/water reverse micelles and its influence on bimolecular electron-transfer kinetics

Sodium 1,4-bis(2-ethylhexyl)sulfosuccinate (AOT) reverse micellar medium has been used to study the photoinduced electron-transfer (ET) reactions between some coumarin derivatives and amines, namely, aniline (AN) and N,N-dimethylaniline (DMAN) at different w(0) (w(0) = [water]/[AOT]) values, to explore the appearance of Marcus inversion and also the possible role of w(0), if any, on the Marcus correlation curves. The coumarin derivatives are found to partition between the heptane-like and the water-like phases of the reverse micelles, and their locations have been confirmed by time-resolved anisotropy measurements. Fluorescence quenching is found to depend both on the location of the coumarin molecules and on the hydrophobicity of the amine donors. Various aspects such as the effect of differential partitioning of the quenchers, the location of the probes in the two phases, the diffusion of the reactants in the micellar phase, etc. have been considered to rationalize the fluorescence quenching rates in reverse micelles. Rotational relaxation times and the diffusion parameters estimated from the anisotropy results do not show good correlation with the observed quenching rates indicating that the diffusion of reactants has no role in the quenching kinetics in reverse micelles. Marcus inversion behavior has been observed for the coumarin-amine systems in the water-like phase at a relatively high exergonicity of approximately 1.2 eV suggesting that the solvent reorganization energy contributes fully to the free energy of activation for the ET reactions in the present systems. This is in accordance with the fast solvent relaxation dynamics reported in reverse micelles. Quenching rates in the water-like phase are found to decrease or increase marginally with increasing w(0) for the coumarin-DMAN and coumarin-AN systems, respectively. This is explained on the basis of the changing solubility of these amines in the water-like phase with changing w(0) values of the reverse micelles. In the heptane-like phase, no clear inversion in the quenching rate versus free energy plot could be observed because the study could not be extended to higher exergonicity due to nonsolubility of the dye C151 in this phase. Present results, especially in the water-like phase, suggest that the confinement of reactants in micellar media can effectively remove the influence of reactant diffusion on bimolecular ET rates and thus make the systems more conducive for the observation of the Marcus inverted region.     

Fluorescence quenching of acridinium and 6-methoxyquinolinium ions by Pb2+, Hg2+, Cu2+, Ag+ and hydrogen sulphide

The quenching of the fluorescene of cationic derivatives of 6-methoxyquinoline and acridine by various heavy metal cations and hydrogen sulphide ion have been studied in detail. Stern—Volmer constants were determined and quenching was found to be exclusively dynamic, except for the hydrogen sulphide ion, which acts as both a dynamic and static quencher. The highly efficient static quenching process is interpreted in terms of nucleophilic attack of hydrogen sulphide to the 9-position of acridinium ion, thereby destroying the conjugated system of the fluorophore.