Early solvent vapor exit in GC for coupled LC-GC involving concurrent eluent evaporation

Use of early solvent vapor exits for concurrent eluent evaporation with the loop-type interface has two purposes: protection of the GC detectors from large amounts of solvent vapors and more efficient discharge of the vapors to accelerate eluent evaporation and help avoiding broad solvent peaks. Use of a retaining pre-column after the uncoated pre-column can rule out losses of solute materials that form sharp peaks.     

Co-solvent effects for preventing broadening or loss of early eluted peaks when using concurrent solvent evaporation in capillary GC. Part 1: Concept of the technique

The concept and some first results of a method are described for evaporating large volumes of solvent in a relatively short pre-column (retention gap) in such a way that solvent trapping retains volatile components in the inlet up to completion of solvent evaporation. The method was developed for transferring large volumes (easily exceeding 1 ml) of HPLC eluent to GC when using on-line coupled HPLC-GC, but is equally suited for injecting large sample volumes (at least some 50 μl) and could be particularly useful for introducing aqueous solutions. Concurrent solvent evaporation allows introduction of very large volumes of liquid into GC. However, peaks eluted up to some 40–80° above the column temperature during introduction of the liquid are strongly broadened due to the absence of solvent trapping. On the other hand, previous retention gap techniques involving solvent trapping were not suited for transferring very large volumes of liquid into GC. Using a relatively high boiling co-solvent added to the sample or the HPLC eluent, advantages of concurrent solvent evaporation can be combined with solute reconcentration by solvent effects, allowing elution of sharp peaks starting at the column temperature during introduction of the sample.     

Trinitrobenzenesulfonic acid: a chromophore,electrophore and pre-column derivatizing agent for high-performance liquid chromatography of alkylamines

Trinitrobenzenesulfonic acid is shown to be an ideal pre-column derivatizing agent for high-performance liquid chromatography of alkylamines. The reaction is quantitative and the trinitrophenyl derivatives are amenable to ultra-violet and electrochemical detection. Electrochemical detection with either a glassy carbon or pressure-annealed pyrolytic graphite working electrode provides lower detection limits than ultraviolet detection and thus is preferable for trace determinations.     

Highly Sensitive Electrochemical Sensor for Determination of Vitamin D in Mixtures of Water‐Ethanol

This paper describes the electrochemical determination of vitamin D₂ (ergocalciferol) and D₃ (cholecalciferol) in mixed organic/water solvent, using a glassy carbon electrode (GCE). The mixing ratio of organic/water solvent has an important influence on the electrocatalytic response of D vitamins on the surface of the glassy carbon electrode. Well‐defined peaks for Vitamin D₂ and D₃ were observed in a 40 % ethanol/60 % water solution with lithium perchlorate as the support electrolyte. This study demonstrated that the glassy carbon electrode is highly sensitive for the determination of vitamin D₂ and D₃, with a limit of detection of 0.13 and 0.118 µmol L^?1, respectively. No significant interference was seen for vitamins A, E and K in the detection of vitamin D.     

Accelerating the electron transfer of choline oxidase using ionic-liquid/NH2-MWCNTs nano-composite

A nano-composite consisting of amine functionalized multi-walled carbon nanotubes and a room temperature ionic liquid (1-butyl-3-methylimidazolium tetrafluoroborate) was prepared and used for modification of glassy carbon electrode. By immobilizing choline oxidase (ChOx) on the modified electrode, the enzyme direct electron transfer has been achieved. The modified electrode exhibited a pair of well-defined cyclic voltammetric peaks at a formal potential of ?0.395?V versus Ag/AgCl in 0.2?M phosphate buffer solution at pH 7.0. This peak was characteristic of ChOx-FAD/FADH₂ redox couple. The electrochemical parameters such as charge transfer coefficient (??) and apparent heterogeneous electron transfer rate constant (k _s) were estimated to be 0.36 and 2.74?s^?1, respectively. When the enzyme electrode was examined for the detection of choline, a relatively high sensitivity (2.59???A?mM^?1) was obtained. Under the optimized experimental conditions, choline was detected in the concentration range from 6.9?×?10^?3 to 6.7?×?10^?1?mM with a detection limit of 2.7???M. The peak currents of ChOx were reasonably stable and retained 90% of its initial current after a period of 2?months.     

Electrochemical behavior of tartaric acid at CuGeO3 nanowire modified glassy carbon electrode

The electrochemical behavior of tartaric acid at the CuGeO₃ nanowire modified glassy carbon electrode has been investigated by cyclic voltammetry (CV). The results show that two pairs of semireversible electrochemical peaks are observed and can be assigned to the process of oxidation–reduction and adsorption–desorption of tartaric acid at the modified glassy carbon electrode, respectively. The intensity of the CV peaks increases linearly with the increase of the content of tartaric acid in the range of 0.01–5 mM and scan rate ranging from 25–200 mV s^?1. CuGeO₃ nanowire modified glassy carbon electrode exhibits good detection ability for tartaric acid in neutral solution with the detection limit of 8.9 and 7.7 μM for cvp1 and cvp2, respectively, at a signal-to-noise ratio of 3. The CuGeO₃ nanowire modified glassy carbon electrode has good reproducibility and stability.     

Determination of methylated dibenzothiophenes in environmental sarnples by on-line HPLC-CGC

Concurrent solvent evaporation with a loop-type interface was used for on-line HPLC-CGC in the analysis of methylated dibenzothiophene (DBT) isomers in oil samples. The chromatographic behavior of 20 methyl DBT's was studied by HPLC on an aminopropylsilane DBTA phase and by GC on a selective methyl-phenylsilicone phase. That provided a method for analyzing by GC-flame photometric detection, the individual components of the DBT family, previously picked out of the crude oil matrix by HPLC. The GC oven temperature was shown to be critical during HPLC eluent introduction into the GC pre-column. Too high a temperature induced a severe broadening of early eluted peaks whereas a temperature too close to the boiling point of the liquid at the inlet pressure induced double peaks. Optimized conditions were retained on this basis and may be used for the analysis of other families of polyaromatic hydrocarbons.     

Direct electron transfer of glucose oxidase immobilized in an ionic liquid reconstituted cellulose–carbon nanotube matrix

Conductive cellulose-multiwalled carbon nanotube (MWCNT) matrix with a porous structure and good biocompatibility has been prepared using a room temperature ionic liquid (1-ethyl-3-methylimidazolium acetate) as solvent. Glucose oxidase (GOx) was encapsulated in this matrix and thereby immobilized on a glassy carbon surface. The direct electron transfer and electrocatalysis of the encapsulated GOx has been investigated using cyclic voltammetry and chronoamperometry. The GOx exhibited a pair of stable, well defined and nearly symmetric reversible redox peaks. The experimental results also demonstrate that the immobilized GOx retains its biocatalytic activity toward the oxidation of glucose and therefore can be employed in a glucose biosensor. The results show that the bioelectrode modified by the cellulose-MWCNT matrix has potential for use in biosensors and other bioelectronics devices.     

Glassy carbon electrodes modified with mixed covalent monolayers of choline, glycine, and glutamic acid for the determination of phenolic compounds

A series of mixed covalent monolayer carbon glassy electrodes (choline/amino acid/GCE) was prepared using choline and amino acids, and the properties were investigated by cyclic voltammetry, electrochemical impedance spectroscopy and X-ray photoelectron spectroscopy. The oxidations of phenolic compounds including dopamine hydrochloride, epinephrine and phenol have been studied. Electrooxidation of phenols, first leads to the formation of phenoxy radical, which reduces to phenols and hydroquinone; the reaction of polyoxyphenylene is effectively restrained at this electrode, unlike only at chlorine or amino acids modified electrode or bare electrode, which rapidly forms polyoxyphenylene and results in electrode passivation. Owing to significant improvement of electrode passivation shaped insulating polymerization, these mixed covalent monolayer carbon glassy electrodes show themselves excellent resistance ability for pollution, could be successfully used as amperometric sensor for phenolic compounds.     

Fabrication of layer-by-layer modified multilayer films containing choline and gold nanoparticles and its sensing application for electrochemical determination of dopamine and uric acid

A novel electrochemical sensor has been constructed by use of a glassy carbon electrode (GCE) coated with a gold nanoparticle/choline (GNP/Ch). Electrochemical impedance spectroscopy (EIS), field emission scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS) were used to characterize the properties of this modified electrode. It was demonstrated that choline was covalently bounded on the surface of glassy carbon electrode, and deposited gold nanoparticles with average size of about 100 nm uniformly distributed on the surface of Ch. Moreover, the modified electrode exhibits strong electrochemical catalytic activity toward the oxidation of dopamine (DA), ascorbic acid (AA) and uric acid (UA) with obviously reduction of overpotentials. For the ternary mixture containing DA, AA and UA, these three compounds can be well separated from each other, allowing simultaneously determination of DA and UA under coexistence of AA. The proposed method can be applied to detect DA and UA in real samples with satisfactory results.     

Highly Sensitive Choline Oxidase Enzyme Inhibition Biosensor for Lead Ions Based on Multiwalled Carbon Nanotube Modified Glassy Carbon Electrodes

The determination of lead ions by inhibition of choline oxidase enzyme has been evaluated for the first time using an amperometric choline biosensor. Choline oxidase (ChOx) was immobilized on a glassy carbon electrode (GCE) modified with multiwalled carbon nanotubes (MWCNT) through cross‐linking with glutaraldehyde. In the presence of ChOx, choline was enzymatically oxidized into betaine at –0.3 V versus Ag/AgCl reference electrode, lead ion inhibition of enzyme activity causing a decrease in the choline oxidation current. The experimental conditions were optimised regarding applied potential, buffer pH, enzyme and substrate concentration and incubation time. Under the best conditions for measurement of the lowest concentrations of lead ions, the ChOx/MWCNT/GCE gave a linear response from 0.1 to 1.0 nM Pb²⁺ and a detection limit of 0.04 nM. The inhibition of ChOx by lead ions was also studied by electrochemical impedance spectroscopy, but had a narrower linear response range and low sensitivity. The inhibition biosensor exhibited high selectivity towards lead ions and was successfully applied to their determination in tap water samples.     

The Direct Electrochemical Oxidation of Ammonia in Propylene Carbonate: A Generic Approach to Amperometric Gas Sensors

The direct electrochemical oxidation of ammonia in propylene carbonate is reported for the first time. The voltammetric responses at glassy carbon, boron‐doped diamond, edge and basal plane pyrolytic graphite electrodes are explored and compared with the outcome indicating that the optimum electrode substrate for analytical purposes in this solvent is glassy carbon. Proof‐of‐concept is shown for the amperometric detection of ammonia using basal plane pyrolytic graphite electrodes abrasively modified with glassy carbon spheres. Given the significantly lower vapor pressure of propylene carbonate in comparison to water the implications for extending the life‐time of practical sensors are evident. Propylene carbonate shows a wide potential window with glassy carbon electrodes permitting this approach to be used for a potential diversity of gaseous analytes.     

Use of Mercury Film Glassy Carbon Electrode Modified with Multiwalled Carbon Nanotubes in Electrochemical Analysis of DNA

Mercury film plated on a glassy carbon electrode modified with multiwalled carbon nanotubes (MF/MWNTs/GCE) was used for the analysis of single (ss) and double stranded (ds) DNA, as well as for Jurkat genomic DNAs methylated to different degrees. The results indicated that the DNA molecules adsorbed quite strongly on the MF/MWNTs/GCE surface allowing ex situ adsorption and produce well developed peaks (due to cytosine and adenine) by using adsorptive stripping (Ads, ex situ) square wave voltammetry (SWV). Also, SWV of Jurkat DNA mixtures methylated to different degrees revealed a linear decrease of the peak height with increasing methylation indicating an increase of structural rigidity.     

聚灿烂甲酚蓝修饰玻碳电极的制备及电化学性质

在含灿烂甲酚蓝的磷酸缓冲溶液中,用循环伏安法扫描.在经预处理的玻碳电极上形成了聚合物薄膜.在-0.7V-+0.9V(vsSCE)的扫描电位范围和弱碱性介质中形成的薄膜具有较高电活性和稳定性.制备好的聚灿烂甲酚蓝修饰电极在磷酸缓冲溶液的循环伏安曲线有两对氧化还原峰,峰电位随pH升高而向负电位方向移动.该电极对NADH的电化学氧化有催化作用,使其氧化电位负移了270mV并增大了氧化峰电流.     

Selective Voltammetric Determination of Uric Acid in the Presence of Ascorbic Acid at Ordered Mesoporous Carbon Modified Electrodes

A novel chemically modified electrode was fabricated by immobilizing ordered mesoporous carbon (OMC) onto a glassy carbon (GC) electrode. The electrocatalytic behavior of the OMC modified electrode towards the oxidation of uric acid (UA) and ascorbic acid (AA) was studied. Compared to a glassy carbon electrode, the OMC modified electrode showed a faster electron transfer rate and reduced the overpotentials greatly. Furthermore, the OMC modified electrode resolved the overlapping voltammetric responses of UA and AA into two well‐defined voltammetric peaks with peak separation of ca. 0.38 V. All results show that the OMC modified electrode has a good electrocatalytic ability to UA and AA, and has an excellent response towards UA even in the presence of high concentration AA.     

芦丁在铂纳米/碳纳米管修饰电极上电化学行为研究

通过电沉积的方式在多壁碳纳米管(MWCNTs)修饰玻碳电极表面上沉积铂(pt)纳米粒子,并运用循环伏安法(CV)、示差脉冲伏安法(DPV)探讨了芦丁在铂纳米/碳纳米管/玻碳电极上的电化学行为.实验结果表明,芦丁在该修饰电极上呈现一对良好氧化还原峰,其氧化峰电流与浓度在3.2×10(-8)～1.2×10(-5)mol/L...     

微柱液相色谱和电化学检测法测定鼠脑微透析液中神经传递物质

报道了使用微柱色谱和电化学检测器测定鼠脑微透析液中神经传递物质的方法。儿茶酚胺，５－羟色胺和代谢物的检测限为 ０． １～０． ５ ｐｇ。含有乙酰胆碱酯酶和胆碱氧化酶的柱后反应器使分离后的乙酰胆碱和胆碱转化成过氧化氢．再用铂电极或过氧化物酶修饰过的玻碳电极检测过氧化氢。乙酰胆碱的检测限当使用怕电极时是５０× １０－１５ｍｏｌ，当使用酶修饰电极时是１０×１０－１５ｍｏｌ。     

琼脂糖膜固载肌红蛋白催化还原过氧化物的研究

用琼脂糖(agarose)将肌红蛋白(Mb)固定在玻碳电极(GCE)表面,制备了Mb-Agarose膜修饰电极。在水-乙醇混合溶液中,包埋在Agarose中的Mb与电极发生直接电子传递,并且能催化还原H2O2、过氧化丁酮、氢过氧化叔丁基、氢过氧化异丙基苯等过氧化物和NO。Mb-Agarose膜修饰电极具有较好的稳定性和重现性,可用于上述过氧化物和亚硝酸盐的定量检测。     

Solid electrodes modified by Ni–Pd thin layers: Highly efficient and low cost cathodic materials for achieving bond scissions in non-aqueous media

A simple mode of palladization of nickel is described. The obtaining of Ni–Pd surfaces (by means of a rapid redox displacement of Ni⁰ by Pd²⁺) permits the electro-catalytic scission of carbon–halogen linkages in non-aqueous media. This palladized material (presumably an alloy) is found to be quite stable. It affords the cleavage of organic halides (alkyl iodides and bromides, benzylic and aromatic halides) with an important energy gain if compared to reduction potentials already reported at more conventional electrodes such as glassy carbon (GC). This preliminary work focuses on a new class of solid electrodes of modified substrates (like glassy carbon, nickel, platinum, palladium, copper or gold) by a very thin layer (a few tens nm) of Ni–Pd. Presumably, the catalytic effect could be based on the synergetic action of Ni and Pd both involved in their oxidative insertion in the C–X bonds.     

在抗坏血酸存在下用L-赖氨酸修饰玻碳电极测定多巴胺

采用电化学氧化法制备了L-广赖氮酸单分子层修饰玻碳电极,研究了多巴胺（DA）和抗坏血酸（AA）在该电极上的电化学行为。结果表明,L-广赖氨酸单分子层修饰玻碳电极不仅能改善多巴胺和抗坏血酸的电化学行为,而且能将多巴胺和抗坏血酸二者在裸电极上的完全重叠的单氧化峰分开成为两个完全独立的氧化峰,循环伏安（CV）图上峰间距为507mV,差分脉冲伏安（DPV）图上峰间距为460mV,由此可实现在AA的共存下对样品中的DA进行选择性测定。