Protein recognition via ion-coordinated molecularly imprinted supermacroporous cryogels

Molecular imprinting is a method for making selective binding sites in synthetic polymers using a molecular template. The aim of this study is to prepare lysozyme-imprinted supermacroporous cryogels which can be used for the purification of lysozyme (Lyz) from egg white. N-Methacryloyl-(L)-histidinemethylester (MAH) was chosen as the metal-coordinating monomer. In the first step, Cu2+ was complexed with MAH and the lysozyme-imprinted poly(HEMA-MAH) [Lyz-MIP] cryogel were produced by free radical polymerization initiated by N,N,N',N'-tetramethylene diamine (TEMED) in an ice bath. After that, the template (i.e., lysozyme) was removed using 0.05 M phosphate buffer containing 1M NaCl (pH 8.0). The maximum lysozyme adsorption capacity was 22.9 mg/g polymer. The relative selectivity coefficients of Lyz-MIP cryogel for lysozyme/bovine serum albumin and lysozyme/cytochrome c were 4.6 and 3.2 times greater than non-imprinted poly(HEMA-MAH) (NIP) cryogel, respectively. Purification of lysozyme from egg white was also monitored by determining the lysozyme activity using Micrococcus lysodeikticus as substrate. The purity of the desorbed lysozyme was about 94% with recovery about 86%. The Lyz-MIP cryogel could be used many times without decreasing the adsorption capacity significantly.     

Creatinine imprinted poly(hydroxyethyl methacrylate) based cryogel cartridges

Creatinine imprinted cryogel (MIP) cartridge was prepared with functional monomer N-methacryloyl-(L)-histidinemethylester (MAH) under frozen conditions. Creatinine adsorption studies and selectivity of MIP cryogel were evaluated in aqueous solution and artificial urine sample. Maximum adsorbed amount of creatinine was calculated as 6.83 mg/g polymer for MIP cryogel. Langmuir and Freundlich adsorption isotherm models were used to investigate the adsorption behaviour of creatinine. In the artificial urine sample; recovery amounts of creatinine were found 34.7–46.2%. Creatinine imprinted cryogel (MIP) cartridge recognized creatinine, 4.58 and 4.37 times greater competitive molecules. MIP cryogel catridge was repeatedly used many times for adsorption desorption cycles.     

Lysozyme-imprinted polymer synthesized using UV free-radical polymerization

Molecular imprinting is a method to fabricate a polymeric material (molecularly imprinted polymer or MIP) capable of selectively recognizing template molecules. Molecular imprinting of small molecules has been studied widely. Less common, however, is the imprinting of biological macromolecules, including proteins, among which lysozyme is an important molecule in the food, pharmaceutical, and diagnostic sciences. In this study, lysozyme MIP was fabricated in two steps. First, lysozyme, PEG600DMA, and methacrylic acid were used as the template molecule, cross-linking monomer, and the functional monomer, respectively, in a UV free-radical polymerization process to synthesize a polymeric gel. Second, lysozyme was removed by enzymatic digestion. Non-imprinted polymer (NIP) was synthesized without lysozyme addition. To evaluate the preferential binding capability of MIP, lysozyme, RNase A, or a 50:50 mixture of lysozyme and RNase A was added to MIP and NIP and then released by digestion. It was found that when more lysozyme was added to the reaction mixture, the quantity of protein released from the polymer increased, reflecting more potential binding sites. Tests of MIP with a competitive binding mixture of lysozyme and RNase A showed the MIP preferentially bound a greater amount of lysozyme, up to 20 times more than RNase A. NIP bound only small amounts of both proteins and did not show a preference for binding either lysozyme or RNase A. These results demonstrate that lysozyme was successfully imprinted into the MIP by UV free-radical polymerization, and the fabricated MIP was able to preferentially bind its template protein.     

基于分子印迹技术的牛血清白蛋白电位式传感器的研究

以牛血清白蛋白(BSA)为模板,合成了分子印迹聚合物凝胶(MIP),进而制得了以聚氯乙烯(PVC)为支撑膜的BSA电位式传感器。采用直接电位法测得BSA在浓度0.1～1.0 mg/mL范围内与电位呈线性关系。此电极制作简单,可用于BSA的测定。     

Modulation of direct electron transfer of cytochrome c by use of a molecularly imprinted thin film

We describe the preparation of a molecularly imprinted polymer film (MIP) on top of a self-assembled monolayer (SAM) of mercaptoundecanoic acid (MUA) on gold, where the template cytochrome c (cyt c) participates in direct electron transfer (DET) with the underlying electrode. To enable DET, a non-conductive polymer film is electrodeposited from an aqueous solution of scopoletin and cyt c on to the surface of a gold electrode previously modified with MUA. The electroactive surface concentration of cyt c was 0.5 pmol cm^?2. In the absence of the MUA layer, no cyt c DET was observed and the pseudo-peroxidatic activity of the scopoletin-entrapped protein, assessed via oxidation of Ampliflu red in the presence of hydrogen peroxide, was only 30 % of that for the MIP on MUA. This result indicates that electrostatic adsorption of cyt c by the MUA–SAM substantially increases the surface concentration of cyt c during the electrodeposition step, and is a prerequisite for the productive orientation required for DET. After template removal by treatment with sulfuric acid, rebinding of cyt c to the MUA–MIP-modified electrode occurred with an affinity constant of 100,000 mol^?1 L, a value three times higher than that determined by use of fluorescence titration for the interaction between scopoletin and cyt c in solution. The DET of cyt c in the presence of myoglobin, lysozyme, and bovine serum albumin (BSA) reveals that the MIP layer suppresses the effect of competing proteins.     

Gelatin-Immobilised Poly(hydroxyethyl methacrylate) Cryogel for Affinity Purification of Fibronectin

In this work, fibronectin purification from human plasma with the gelatin-immobilised poly(hydroxyethyl methacrylate) (PHEMA) cryogel has been evaluated. The PHEMA cryogel was prepared by cryo-polymerisation which proceeds in an aqueous solution of monomer frozen inside a plastic syringe. The PHEMA cryogel contained interconnected macrochannels of 10–200 μm in diameter. Gelatin molecules were covalently immobilised onto the PHEMA cryogel via carbodiimide activation. The gelatin-immobilised PHEMA cryogel was used to purify fibronectin from human plasma. Fibronectin adsorption from human plasma on the PHEMA cryogel was 0.30 mg/ml, while much higher adsorption values, up to 38 mg/ml, was obtained with the gelatin-immobilised PHEMA cryogel. The fibronectin adsorption capacity of the gelatin-immobilised PHEMA cryogel did not change with an increase in the flow rate of plasma. Up to 92 % of the adsorbed fibronectin was eluted using 2 M urea containing 1 M NaCl as elution agent. The adsorption–elution cycle was repeated ten times using the same PHEMA cryogel. No remarkable decrease was detected in the adsorption capacity of the gelatin-immobilised PHEMA cryogel.     

Novel surface modified molecularly imprinted polymer using acryloyl-β-cyclodextrin and acrylamide as monomers for selective recognition of lysozyme in aqueous solution

A novel protein imprinted polymer for selective recognition of lysozyme was obtained. Acryloyl-β-cyclodextrin, which offered hydrophilic exterior and hydrophobic cavity that were allowed to self-assemble with the template protein through hydrogen interaction and hydrophobic interaction, was synthesized and used as the functional monomer. Polymerization was carried out in the presence of acrylamide as an assistant monomer, which resulted in a new type of protein imprinted polymer. Langmuir adsorption model was employed to describe the isotherms, and maximum adsorption capacity was evaluated. The performance of such imprinted polymer was further demonstrated by high-performance liquid chromatography, and the results showed that the column packed with the lysozyme imprinted silica beads could effectively separate lysozyme from the mixture of lysozyme–cytochrome c, lysozyme–bovine serum albumin, lysozyme–avidin or lysozyme–methylated bovine serum albumin, which showed its high selectivity.     

Surface imprinted thin polymer film systems with selective recognition for bovine serum albumin

Molecularly imprinted polymers are synthetic antibody mimics formed by the crosslinking of organic or inorganic polymers in the presence of an analyte which yields recognitive polymer networks with specific binding pockets for that biomolecule. Surface imprinted polymers were synthesized via a novel technique for the specific recognition of bovine serum albumin (BSA). Thin films of recognitive networks based on 2-(dimethylamino)ethyl methacrylate (DMAEMA) as the functional monomer and varying amounts of either N,N′-methylenebisacrylamide (MBA) or poly(ethylene glycol) (400) dimethacrylate (PEG400DMA) as the crosslinking agent were synthesized via UV free-radical polymerization and characterized. A clear and reproducible increase in recognition of the template BSA was demonstrated for these systems at 1.6-2.5 times more BSA recognized by the MIP sample relative to the control polymers. Additionally, these polymers exhibited selective recognition of the template relative to competing proteins with up to 2.9 times more BSA adsorbed than either glucose oxidase or bovine hemoglobin. These synthetic antibody mimics hold significant promise as the next generation of robust recognition elements in a wide range of bioassay and biosensor applications.     

Surface molecularly imprinted magnetic microspheres for the recognition of albumin

A new approach, combining metal coordination with the molecular imprinting technique, was developed to prepare affinity materials. Magnetic poly(glycidyl methacrylate) microspheres in monosize form were used for specific recognition toward the target protein. The magnetic poly(glycidyl methacrylate) microspheres were prepared by dispersion polymerization in the presence of magnetite nanopowder. Surface imprinted magnetic poly(glycidyl methacrylate) microspheres based on metal coordination were prepared and used for the selective recognition of human serum albumin. Iminodiacetic acid was used as the metal coordinating agent and human serum albumin was anchored by Cu²⁺ ions on the surface of magnetic poly(glycidyl methacrylate) microspheres by metal coordination. The magnetic poly(glycidyl methacrylate) microspheres were coated with a polymer formed by condensation of tetraethyl orthosilicate and 3‐aminopropyltrimethoxysilane. The human serum albumin imprinted magnetic poly(glycidyl methacrylate) microspheres were characterized by scanning electron microscopy, attenuated total reflectance Fourier transform infrared spectroscopy and particle size analysis. The maximum adsorption capacity of human serum albumin imprinted magnetic poly(glycidyl methacrylate) microspheres was 37.7 mg/g polymer at pH 6.0. The selectivity experiments of human serum albumin imprinted magnetic poly(glycidyl methacrylate) microspheres prepared with different concentrations in the presence of lysozyme, bovine serum albumin and cytochrome C were performed in order to determine the relative selectivity coefficients.     

Preparation of composite monoliths of quaternized chitosan and diatom earth for protein separation

In this study, composite monoliths with porous structures were prepared using quaternized chitosan and diatom earth for protein separation. Quaternized chitosan (N-[(2-hydroxy-3-trimethylammonium)propyl] chitosan chloride) dissolved in water was mixed with diatom earth and crosslinked with glutaraldehyde under low-temperature conditions to form a cryogel. Interconnected porous monoliths were obtained after removing ice crystals from the cryogel. The monoliths adsorbed bovine serum albumin selectively from the solution mixture of bovine serum albumin and bovine ɤ-globulin, and bovine ɤ-globulin was recovered in the flow-through fraction. The adsorption selectivity was enhanced by changing the solution pH from 6.8 to 5.5. The adsorption of bovine serum albumin by the monolith was replicated at least five times following its washing with a buffer containing 400 mM NaCl and subsequent regeneration with a 10 mM acetate buffer. The composited monolith is a promising adsorbent for the removal of acidic proteins, such as serum albumin contamination in neutral proteins, for example, ɤ-globulins, in bioproduction processes.     

Synthesis and Adsorption Study of BSA Surface Imprinted Polymer on CdS Quantum Dots

A new bovine serum albumin (BSA) surface imprinting method was developed by the in-corporation of quantum dots (QDs) into molecularly imprinted polymers (MIP), which can offer shape selectivity. Preparation and adsorption conditions were optimized. Physical ap-pearance of the QDs and QDs-MIP particles was illustrated by scanning electron microscope images. Photoluminescence emission of CdS was quenched when rebinding of the template.The quenching of photoluminescence emissions is presumably due to the fluorescence reso-nance energy transfer between quantum dots and BSA template molecules. The adsorption is compiled with Langmuir isotherm, and chemical adsorption is the rate-controlling step.The maximum adsorption capacity could reach 226.0 mg/g, which is 142.4 mg/g larger than that of undoped BSA MIP. This study demonstrates the validity of QDs coupled with MIP technology for analyzing BSA.     

A novel adsorbent for protein chromatography: supermacroporous monolithic cryogel embedded with Cu2+-attached sporopollenin particles

The aim of this study is to prepare supermacroporous cryogels embedded with Cu(2+)-attached sporopollenin particles (Cu(2+)-ASP) having large surface area for high protein adsorption capacity. Supermacroporous poly(2-hydroxyethyl methacrylate) (PHEMA)-based monolithic cryogel column embedded with Cu(2+)-ASP was prepared by radical cryo-copolymerization of 2-hydroxyethyl methacrylate (HEMA) with N,N'-methylene-bis-acrylamide (MBAAm) as cross-linker directly in a plastic syringe for affinity purification of human serum albumin (HSA). Firstly, Cu(2+) ions were attached to sporopollenin particles (SP), then the supermacroporous PHEMA cryogel with embedded Cu(2+)-ASP was produced by free radical polymerization using N,N,N',N'-tetramethylene diamine (TEMED) and ammonium persulfate (APS) as initiator/activator pair in an ice bath. Embedded particles (10 mg) in PHEMA-based cryogel column were used in the adsorption/desorption of HSA from aqueous solutions. Optimum conditions of adsorption experiments were performed at pH 8.0 phosphate buffer, with flow rate of 0.5 mL/min, and at 5°C. The maximum amount of HSA adsorption from aqueous solution was very high (677.4 mg/g SP) with initial concentration 6 mg/mL. It was observed that HSA could be repeatedly adsorbed and desorbed to the embedded Cu(2+)-ASP in PHEMA cryogel without significant loss of adsorption capacity.     

A Crosslinked Carboxylic Acid Containing Cation Exchange Monolithic Cryogel for Human Serum Albumin Separation

For this work, we synthesized poly(N-isopropylacrylamide-acrylamide)-acrylic acid (poly(NIPAM-Am)-AAc) monolithic cryogel for a human serum albumin separation (HSA) from a protein mixture (human serum immunoglobulin, human serum albumin and lysozyme) and performed HSA adsorption studies using the cryogel to do continuous system experiments in a syringe column connected by a peristaltic pump. Poly(NIPAM-Am)-AAc with a pore size of 10–100 μm was produced by free radical polymerization that proceeded in an aqueous solution of monomers frozen inside a syringe column. The monolithic poly(NIPAM-Am)-AAc cryogel was characterized by performing swelling studies, FTIR and SEM that showed a swelling ratio of 6.2 g H₂O/g dry cryogel. The maximum HSA adsorption by the cryogel was 42.5 mg/g polymer at pH 4.0 in a 50 mM acetate buffer. We also studied the effect of two different temperatures (25 and 40°C). The higher temperature increased the adsorption capacity of the cryogel. HSA molecules could be reversibly adsorbed and desorbed five times with the same poly(NIPAM-Am)-AAc cryogel without a noticeable loss of their HSA adsorption capacity. The synthesized cryogel was used to separate albumin from the protein mixture. Adsorbed albumin was eluted by changing the pH of the buffer (pH 7.0 and 25°C). Poly(NIPAM-Am)-AAc monolithic cryogel behaved as a cation exchange column because of its functional carboxylic group.     

Bilirubin recognition via molecularly imprinted supermacroporous cryogels

Recent years molecular imprinting has received considerable attention as an excellent and simple approach to recognize small molecules and bioactive substances. The aim of this study is to prepare the bilirubin-imprinted supermacroporous cryogels which can be used for the adsorption of bilirubin from human plasma. N-methacryloyl-(L)-tyrosinemethylester (MAT) was chosen as the pre-organization monomer. In the first step, bilirubin was complexed with MAT and the bilirubin-imprinted poly(hydroxyethyl methacrylate-N-methacryloyl-(L)-tyrosine methylester) [BR-MIP] cryogel was produced by free radical polymerization initiated by N,N,N',N'-tetramethylene diamine (TEMED) and ammonium persulfate (APS) pair in an ice bath. After that, the template molecules (i.e., bilirubin) were removed from the polymeric structure using sodium carbonate and sodium hydroxide. The maximum bilirubin adsorption amount was 3.6 mg/g polymer. The relative selectivity coefficients of the BR-MIP cryogel for bilirubin/cholesterol and bilirubin/testosterone mixtures were 7.3 and 3.2 times greater than non-imprinted poly(HEMA-MAT) [NIP] cryogel, respectively. The BR-MIP cryogel could be used many times without decreasing bilirubin adsorption amount significantly. Therefore, as a reusable carrier possessing high selectivity, BR-MIP cryogel has a potential candidate as a clinical hemoperfusion material.     

光接枝表面修饰法制备牛血红蛋白的分子印迹微球

聚苯乙烯球载体表面经引发转移终止剂修饰后, 采用光接枝表面印迹方法制备了以牛血红蛋白(BHb)为模板分子、丙烯酰胺为功能单体和N,N′-亚甲基双丙烯酰胺为交联剂的分子印迹聚合物微球(MIP). 进一步采用红外光谱(IR)、扫描电子显微镜(SEM)和元素分析对聚合物微球进行了表征, 证实了载体表面成功地接枝了分子印迹层, 并研究了其吸附性能和分子识别选择性能. 结果表明, 采用光接枝表面修饰法制备的分子印迹微球对模板分子有着很好的吸附容量和识别选择性.     

Albumin molecularly imprinted polymer with high template affinity — Prepared by systematic optimization in mixed organic/aqueous media

An approach using systematic optimization for the formation of an albumin molecularly imprinted polymer (MIP), able to separate albumin from proteins in solution, has been prepared by imprinting albumin using a copolymer comprising 3-dimethylaminopropyl methacrylate and tetraethylene glycol dimethacrylate in a mole ratio of 1 to 8. Cytochrome c, lysozyme and myoglobin were used in competitive re-binding experiments to compete with the polymer's native template with all protein species present at 0.0004 g mL^− 1. The effects of: monomer to crosslinker mole ratio, polymerization temperature and time were investigated. It was found that the addition of water 6.04%, into the pre-polymerization albumin-monomer complex enhanced the adsorption capacity and selectivity of the resulting MIP from 2.18 × 10^− 3 to 6.02 × 10^− 3 g g-MIP^− 1 and 83.5% to 98.7%, respectively. These results also showed that the MIP possessed high selectivity and adsorption capacity with respect to albumin in comparison with interfering species also present in solution. Polymerization temperature, time and the water content of the pre-polymerization mixture were all shown to have significant effects on the resulting albumin-MIP's performance. However, their influence on the polymer's affinity for the potentially interfering species was negligible. Additionally, higher polymerization temperatures (> 38 °C) and extended polymerization times (> 60 h) increased monomer conversion as determined by HPLC, but decreased the selectivity and adsorption capacity of the MIP. An optimized MIP, with very high selectivity and 6.37 × 10^− 3 g g-MIP^− 1 template re-adsorption capacity was obtained using the following polymerization conditions: 0.125 mole ratio of monomer to crosslinker, 6.04 wt.% water content with respect to the mass of the monomer complex, 60 h polymerization time at 38 °C, and with 0.47% albumin in the pre-polymerization monomer complex. Finally, the functions of polymerization temperature, time and the significance of the water content in the albumin-monomer complex are also discussed.     

Preparation of magnetic molecularly imprinted polymers based on a deep eutectic solvent as the functional monomer for specific recognition of lysozyme

A magnetized molecularly imprinted polymer (MIP) was prepared via a surface-imprinting technique. An allyl-based deep eutectic solvent was chosen as the functional monomer to obtain the polymer for specific recognition of lysozyme. It was deposited on silica-coated magnetite nanoparticles. The structure of the polymer was confirmed by X-ray diffraction, Fourier transform infrared spectrometry, transmission electron microscopy, thermogravimetric analysis and vibrating sample magnetometry. The maximum binding capacity of the imprinted polymer is found to be 108 mg·g^?1, which is higher than that of non-imprinted polymer. Compared to reference proteins such as cytochrome C, bovine hemoglobin and bovine serum albumin, the MIP shows favorable selectivity for lysozyme. Besides, the imprinted polymer can be further used to specifically recognize lysozyme from the protein mixture and chicken egg white. Reusability studies demonstrate that the polymer can be recycled four times without significant loss of adsorption capacity. The LOD of the method is 12.8 μg·mL^?1. The relative standard deviations (for n = 3) are 1.38% for precision and 2.76% for repeatability. Its facile synthesis, high adsorption performance and excellent selectivity to capture lysozyme make this polymer an attractive candidate to be applied in biomacromolecular purification.

Open image in new window

Graphical abstract Magnetic molecularly imprinted polymer (MIP) based on deep eutectic solvent as functional monomer was fabricated and applied for the specific recognition of lysozyme. The MIP exhibits high adsorption capacity and excellent selectivity for lysozyme.

     

Preparation and evaluation of a macroporous molecularly imprinted hybrid silica monolithic column for recognition of proteins by high performance liquid chromatography

A novel type of macroporous molecularly imprinted hybrid silica monolithic column was first developed for recognition of proteins. The macroporous silica-based monolithic skeleton was synthesized in a 4.6 mm i.d. stainless steel column by a mild sol–gel process with methyltrimethoxysilane (MTMS) as a sole precursor, and then vinyl groups were introduced onto the surface of the silica skeleton by chemical modification of γ-methacryloxypropyltrimethoxysilane (γ-MAPS). Subsequently, the molecularly imprinted polymer (MIP) coating was copolymerized and anchored onto the surface of the silica monolith. Bovine serum albumin (BSA) and lysozyme (Lyz), which differ greatly in molecular size, isoelectric point, and charge, were representatively selected for imprinted templates to evaluate recognition property of the hybrid silica-based MIP monolith. Some important factors, such as template–monomer molar ratio, total monomer concentration and crosslinking density, were systematically investigated. Under the optimum conditions, the obtained hybrid silica-based MIP monolith showed higher binding affinity for template than its corresponding non-imprinted (NIP) monolith. The imprinted factor (IF) for BSA and Lyz reached 9.07 and 6.52, respectively. Moreover, the hybrid silica-based MIP monolith displayed favorable binding characteristics for template over competitive protein. Compared with the imprinted silica beads for stationary phase and in situ organic polymer-based hydrogel MIP monolith, the hybrid silica MIP monolith exhibited higher recognition, stability and lifetime.     

尼卡地平分子聚合物的制备及识别性能研究

采用分子印迹技术合成了以尼卡地平为模板分子,甲基丙烯酸为功能单体的分子印迹聚合物(MIP).运用平衡结合实验研究了聚合物的吸附特性和选择识别能力.通过Scatchard方程分析,结合位点的离解常数Kd=1.03 mmol·L-1,最大表观结合常数Qmax=18.76 μmol·g-1.结果表明,分子印迹聚合物对尼卡地平呈现出较高的吸附性和选择识别性,对尼卡地平药物的分离富集和检测具有实际临床意义.     

胆酸印迹聚合物的制备及在含水介质中的结合性能

为了在含水介质中进行有效印迹,本研究中以双甲基丙烯酰-β-环糊精（BMA-β-CD）和2-(二乙基胺基)乙基甲基丙烯酸酯(DEAEM)为功能单体制备了胆酸印迹聚合物MIP1,并用平衡结合实验研究了MIP1在含水介质中对模板分子的识别能力。结果表明,MIP1比单独以BMA-β-CD或DEAEM为功能单体制备的印迹聚合物MIP2和MIP3,显示出对模板分子更好的选择性结合能力。MIP1的特异性吸附量ΔCP为38.81μmol/g,印迹因子IF为2.46。研究表明,在含水介质中,利用模板分子与功能单体之间的疏水作用和离子作用是提高印迹聚合物分子识别能力的关键。研究还表明,在识别过程中,疏水作用在驱动分子进入印迹孔穴时起重要作用。