磺化水热碳催化乙酰丙酸酯化生成戊酮酸乙酯(英文)

The synthesis of carbon-based, heterogeneous sulphonic catalysts for the production of levulinate esters. Hydrothermal treatment at moderated temperatures was employed to generate highly functional carbonaceous materials, referred to as hydrothermal carbons (HTCs), from both glucose, cellulose and rye straw. The products were sulfonated to generate solid acid-catalysts. Characterisation of the as-synthesised materials as well as catalyst activity tests were performed. SEM images indicate the micrometre-sized particles present in both HTCs were largely unaffected by sulfonation, although cellulose-derived HTC displayed signs of inadequate hydrolysis. FT-IR spectroscopy and elemental analysis confirmed successful incorporation of sulphonic groups. 13C solid state NMR, in addition to TGA, elucidated the carbons’ structural composition and supported the common-ly-proposed hydrothermal carbonisation mechanism. Finally, the catalysts were tested via levulinic acid-ethanol esterification and gave high conversion and ester-selectivities ( 90%).     

Improving ORR activity of carbon nanotubes by hydrothermal carbon deposition method

Nitrogen doped carbons are an important family of materials with ideal activity for oxygen reduction reaction(ORR). It is always interesting to search functional carbons with high heteroatom contents and desirable structure for ORR. Within this study, the surface modification of carbon nanotubes(CNTs) via hydrothermal carbonization(HTC) technique in the presence of glucose and urea was reported, where the surface of CNTs is successfully coated by nitrogen containing hydrothermal carbon layers. The resulting composite combines both advantages of the outstanding electrical conductivity of CNTs and the effective ORR active sites provided by doped nitrogen in the HTC carbon layers. By controlling the ratio of glucose and urea, the nitrogen contents coated on the surface of CNTs can reach up to 1.7 wt%. The resulting materials show outstanding electrochemical activity towards ORR in alkaline electrolyte, making it one of the valuable metal-free electrode materials and a competent alternative to the state-of-the-art Pt/C catalyst.     

Ring current effects in the active site of medium-chain Acyl-CoA dehydrogenase revealed by NMR spectroscopy

Medium-chain acyl-CoA dehydrogenase (MCAD) catalyzes the flavin-dependent oxidation of fatty acyl-CoAs to the corresponding trans-2-enoyl-CoAs. The interaction of hexadienoyl-CoA (HD-CoA), a product analogue, with recombinant pig MCAD (pMCAD) has been studied using (13)C NMR and (1)H-(13)C HSQC spectroscopy. Upon binding to oxidized pMCAD, the chemical shifts of the C1, C2, and C3 HD carbons are shifted upfield by 12.8, 2.1, and 13.8 ppm, respectively. In addition, the (1)H chemical shift of the C3-H is also shifted upfield by 1.31 ppm while the chemical shift of the C4 HD-CoA carbon is unchanged upon binding. These changes in chemical shift are unexpected given the results of previous Raman studies which revealed that the C3=C2-C1=O HD enone fragment is polarized upon binding to MCAD such that the electron density at the C3 and C1 carbons is reduced, not increased (Pellet et al. Biochemistry 2000, 39, 13982-13992). To investigate the apparent discrepancy between the NMR and Raman data for HD-CoA bound to MCAD, (13)C NMR spectra have been obtained for HD-CoA bound to enoyl-CoA hydratase, an enzyme system that has also previously been studied using Raman spectroscopy. Significantly, binding to enoyl-CoA hydratase causes the chemical shifts of the C1 and C3 HD carbons to move downfield by 4.8 and 5.6 ppm, respectively, while the C2 resonance moves upfield by 2.2 ppm, in close agreement with the alterations in electron density at these carbons predicted from Raman spectroscopy (Bell, A. F.; Wu, J.; Feng, Y.; Tonge, P. J. Biochemistry 2001, 40, 1725-33). The large increase in shielding experienced by the C1 and C3 HD carbons in the HD-CoA/MCAD complex is proposed to arise from the ring current field from the isoalloxazine portion of the flavin cofactor. The flavin ring current, which is only present when the enzyme is placed in an external magnetic field, also explains the differences in (13)C NMR chemical shifts for acetoacetyl-CoA when bound as an enolate to MCAD and enoyl-CoA hydratase and is used to rationalize the observation that the line widths of the C1 and C3 resonances are narrower when the ligands are bound to MCAD than when they are free in the protein solution.     

13C NMR spectroscopy of core heme carbons as a simple tool to elucidate the coordination state of ferric high-spin heme proteins

Evidence is presented demonstrating that the magnitudes of the 13C chemical shifts originating from heme meso carbons provide a straightforward diagnostic tool to elucidate the coordination state of high-spin heme proteins and enzymes. Pentacoordinate high-spin heme centers exhibit 13C meso shifts centered at approximately 250 ppm, whereas their hexacoordinate counterparts exhibit 13C shifts centered at approximately -80 ppm. The relatively small spectral window (400 to -100 ppm) covering the meso-13C shifts, the relatively narrow lines of these resonances, and the availability of biosynthetic methods to prepare 13C-labeled heme (Rivera, M.; Walker, F. A. Anal. Biochem. 1995, 230, 295-302) make this approach practical. The theoretical basis for the distinct chemical shifts observed for meso carbons from hexacoordinate high-spin hemes relative to their pentacoordinate counterparts are now well understood (Cheng, R.-J.; Chen, P. Y.; Lovell, T.; Liu, T.; Noodleman, L.; Case, D. A. J. Am. Chem. Soc. 2003, 125, 6774-6783), which indicates that the magnitude of the meso-carbon chemical shifts can be used as a simple and reliable diagnostic tool for determining the coordination state of the heme active sites, independent of the nature of the proximal ligand. Proof of the principle for the 13C NMR spectroscopic approach is demonstrated using hexa- and pentacoordinate myoglobin. Subsequently, 13C NMR spectroscopy has been used to unambiguously determine that a recently discovered heme protein from Shigella dysenteriae (ShuT) is pentacoordinate.     

Characterization and evaluation of the photocatalytic properties of wormhole-like mesoporous silica incorporating TiO2, prepared using different hydrothermal and calcination temperatures

TiO₂?CSiO₂ mesoporous materials were synthesised by deposition of TiO₂ nanoparticles prepared by the sol?Cgel method on to the internal pore surface of wormhole-like mesoporous silica. In this work we synthesised wormhole-like mesoporous silica of different surface area by changing the hydrothermal temperature (70, 100, or 130?°C). Subsequent to this, titania solution was deposited on to the inner surface of the pores and this was followed by calcination at different temperatures (400, 600, or 800?°C). The effect of different hydrothermal and calcination temperature on the photocatalytic properties was evaluated. The samples were characterized by N₂-sorption, X-ray diffraction, X-ray photoelectron spectroscopy, field emission scanning electron microscopy, and transmission electron microscopy. The effect of different hydrothermal and calcination temperatures on the photocatalytic properties was evaluated by measuring the degradation of methylene blue in aqueous solution under UV light irradiation (mercury lamp, 125?W). The results indicated that appropriate surface area and degree of crystallinity are two important factors for obtaining high photocatalytic efficiency. Samples prepared at a hydrothermal temperature of 100?°C and calcined at 800?°C had the best photocatalytic performance, because of the highest surface area and high crystallinity.     

Zirconia-supported phosphotungstic acid as catalyst for alkylation of phenol with benzyl alcohol

The liquid-phase alkylation of phenol with benzyl alcohol was carried out using zirconia-supported phosphotungstic acid (PTA) as catalyst. The catalysts with different PTA loadings (5–20 wt.% calcined at 750 °C) and calcination temperature (15 wt.% calcined from 650 to 850 °C) were prepared and characterized by ³¹P MAS NMR and FT-IR pyridine adsorption spectroscopy. The catalyst with optimum PTA loading (15%) and calcination temperature (750 °C) was prepared in different solvents. ³¹P MAS NMR spectra of the catalysts showed two types of phosphorous species, one is the Keggin unit and the other is the decomposition product of PTA and the relative amount of each depends on PTA loading, calcination temperature and the solvent used for the catalyst preparation. The catalysts with 15% PTA on zirconia calcined at 750 °C showed the highest Brönsted acidity. At 130 °C and phenol/benzyl alcohol molar ratio of 2 (time, 1 h), the most active catalyst, 15% PTA calcined at 750 °C gave 98% benzyl alcohol conversion with 83% benzyl phenol selectivity.     

(13)C,(13)C]- and [(13)C,(1)H]-TROSY in a triple resonance experiment for ribose-base and intrabase correlations in nucleic acids.

A novel TROSY (transverse relaxation-optimized spectroscopy) element is introduced that exploits cross-correlation effects between (13)C-(13)C dipole-dipole (DD) coupling and (13)C chemical shift anisotropy (CSA) of aromatic ring carbons. Although these (13)C-(13)C effects are smaller than the previously described [(13)C,(1)H]-TROSY effects for aromatic (13)C-(1)H moieties, their constructive use resulted in further transverse relaxation-optimization by up to 15% for the resonances in a 17 kDa protein-DNA complex. As a practical application, two- and three-dimensional versions of the HCN triple resonance experiment for obtaining ribose-base and intrabase correlations in the nucleotides of DNA and RNA (Sklenar, V.; Peterson, R. D.; Rejante, M. R.; Feigon, J. J. Biomol. NMR 1993, 3, 721-727) have been implemented with [(13)C,(1)H]- and [(13)C,(13)C]-TROSY elements to reduce the rate of transverse relaxation during the polarization transfers between ribose (13)C1' and base (15)N1/9 spins, and between (13)C6/8 and N1/9 within the bases. The resulting TROSY-HCN experiment is user-friendly, with a straightforward, robust experimental setup. Compared to the best previous implementations of the HCN experiment, 2-fold and 5-fold sensitivity enhancements have been achieved for ribose-base and intrabase connectivities, respectively, for (13)C,(15)N-labeled nucleotides in structures with molecular weights of 10 and 17 kDa. TROSY-HCN experiments should be applicable also with significantly larger molecular weights. By using modified TROSY-HCN schemes, the origins of the sensitivity gains have been analyzed.     

13C isotope effects on 1H chemical shifts: NMR spectral analysis of 13C‐labelled D‐glucose and some 13C‐labelled amino acids

The one‐ and two‐bond ¹³C isotope shifts, typically ?1.5 to ?2.5 ppb and ?0.7 ppb respectively, in non‐cyclic aliphatic systems and up to ?4.4 ppb and ?1.0 ppb in glucose cause effects that need to be taken into account in the adaptive NMR spectral library‐based quantification of the isotopomer mixtures. In this work, NMR spectral analyses of some ¹³C‐labelled amino acids, D ‐glucose and other small compounds were performed in order to obtain rules for prediction of the ¹³C isotope effects on ¹H chemical shifts. It is proposed that using the additivity rules, the isotope effects can be predicted with a sufficient accuracy for amino acid isotopomer applications. For glucose the effects were found strongly non‐additive. The complete spectral analysis of fully ¹³C‐labelled D ‐glucose made it also possible to assign the exocyclic proton signals of the glucose. Copyright © 2009 John Wiley & Sons, Ltd.     

Carbon exchange in hot alkaline degradation of glucose

The decomposition of 1-13C-D-glucose, 6-13C-D-glucose, and 1-13C-sodium lactate has been studied in hot (145 +/- 3 degrees C) alkaline (3.5 M) sodium hydroxide solution in order to understand the mechanisms of carbon exchange in the alkaline degradation of glucose. The results show that in the formation of lactate from glucose the carboxylate (COO-) carbon is formed preferentially from C1 carbons but methyl (CH3) carbon is formed preferentially from C6 carbons. However, on further decomposition of lactate to ethanol and carbonate, 13C-labeled carboxylate (COO-) is scrambled equally among carbonate and both carbons in product ethanol molecules. In the production of glycolate, the labeled C1 carbon mainly ends up as carboxylate (COO-) carbon, while for C6-labeled glucose the labeled carbon mainly ends up as alcoholic (CH2OH) carbon. In the production of acetate and formate there is also discrimination between C1 and C6 label.     

Homo- and methano[60]fullerenes with chiral attached moieties--1H and 13C NMR chemical shift assignments and diastereotopicity effects

(1)H and (13)C NMR chemical shift predictions of homo- and methano[60]fullerenes containing chiral centers in attached fragment were made using the two-dimensional NMR technique (HH COSY, (1)H-(13)C HSQC and HMBC) and the quantum chemistry GIAO calculation method in the PBE/3ζ approach. The influence of a chiral substituent on the (13)C chemical shifts of diastereotopic fullerene carbons was estimated by comparing the calculated and experimental (13)C NMR spectra. The resonances of the fullerene carbons in α-, β- and δ-positions relative to the position of the substituent exhibit the greatest diastereotopic splitting.     

天然CXN沸石分子筛水热稳定性研究Ⅰ.水热稳定性影响因素

以天然CXN沸石为基底材料,通过离子交换、焙烧和酸处理等方法研究了影响该沸石水热稳定性的因素.XRD,XRF和27Al MAS NMR等结果表明阳离子种类和位置均会影响沸石水热稳定性,其中铵型CXN沸石的水热稳定性最高.高温焙烧铵型CXN沸石虽能提高骨架硅铝比,但骨架缺陷增多导致其水热稳定性下降.还研究了水蒸汽量、处理温度和时间对沸石骨架结构变化的影响,结果表明提高温度和水蒸汽量均会降低沸石结晶度,但处理时间则对结晶度的影响较小.     

Carbon-13 Nuclear Magnetic Resonance Spectroscopy Study of the Glucose Stress of Human Lenses

The sorbitol theory in diabetic cataractogenesis was based on sorbitol accumulation under glucose stress. Sorbitol accumulation was examined by ¹³C nuclear magnetic resonance spectroscopy (NMR) for the first time in matched human lenses incubated in 5.5 mM and 35.5 mM C-1 ¹³C-enriched glucose up to 28 hours. The results showed that sorbitol and lactate in human tens can be detected at 35.5 mM, but not in 5.5 mM glucose solution. The glycolysis metabolic pathway of human lenses may be quite different from that of animals. The accumulation of metabolites can be traced and quantified by the intensities of ¹³C NMR peaks. Therefore, ¹³C NMR spectroscopy can be used as a valuable tool to investigate human lens carbohydrate metabolism non-interventionally.     

CP/MAS (13)C NMR study of cellulose and cellulose derivatives. 1. Complete assignment of the CP/MAS (13)C NMR spectrum of the native cellulose

The precise assignments of cross polarization/magic angle spinning (CP/MAS) (13)C NMR spectra of cellulose I(alpha) and I(beta) were performed by using (13)C labeled cellulose biosynthesized by Acetobacter xylinum (A. xylinum) ATCC10245 strain from culture medium containing D-[1,3-(13)C]glycerol or D-[2-(13)C]glucose as a carbon source. On the CP/MAS (13)C NMR spectrum of cellulose from D-[1,3-(13)C]glycerol, the introduced (13)C labeling were observed at C1, C3, C4, and C6 of the biosynthesized cellulose. In the case of cellulose biosynthesized from D-[2-(13)C]glucose, the transitions of (13)C labeling to C1, C3, and C5 from C2 were observed. With the quantitative analysis of the (13)C transition ratio and comparing the CP/MAS (13)C NMR spectrum of the Cladophora cellulose with those of the (13)C labeled celluloses, the assignments of the cluster of resonances which belong to C2, C3, and C5 of cellulose, which have not been assigned before, were performed. As a result, all carbons of cellulose I(alpha) and I(beta) except for C1 and C6 of cellulose I(alpha) and C2 of cellulose I(beta) were shown in equal intensity of doublet in the CP/MAS spectrum of the native cellulose, which suggests that two inequivalent glucopyranose residues were contained in the unit cells of both cellulose I(alpha) and I(beta) allomorphs.     

Assignments of carbon NMR resonances for microcrystalline ubiquitin

Solid-state NMR 2D spectroscopy was used to correlate carbon backbone and side-chain chemical shifts for uniformly (13)C,(15)N-enriched microcrystalline ubiquitin. High applied field strengths, 800 MHz for protons, moderate proton decoupling fields, 80-100 kHz, and high magic angle sample spinning frequencies, 20 kHz, were used to narrow the most of the carbon line widths to 0.5-0.8 ppm. Homonuclear magnetization transfer was effected by matching the proton RF field to the spinning frequency, the so-called dipolar-assisted rotational resonance (DARR) (Takegoshi, K.; Nakamura, S.; Terao, T. Chem. Phys. Lett. 2001, 344, 631-637), and a mixing time of 20 ms was used to maximize the intensity of one-bond transfers between carbon atoms. This polarization transfer sequence resulted in roughly 14% transfer efficiencies for directly bonded carbon pairs and 4% transfer efficiencies for carbons separated by a third carbon. With this simple procedure, the majority of the one-bond correlations was observed with moderate transfer efficiencies, and many two-bond correlations were also observed with weaker intensities. Spin systems could be identified for more than half of the amino acid side chains, and site-specific assignments were readily possible via comparison with 400 MHz (15)N-(13)C-(13)C correlation spectroscopy (described separately).     

Correlation of Electronic Effects in N-Alkylnicotinamides with NMR Chemical Shifts and Hydride Transfer Reactivity

The (13)C and (15)N NMR chemical shifts for ring atoms of a series of N-alkylnicotinamides are shown to be correlated with their reduction potentials and reactivities toward NaBH(3)CN. The nicotinamide compounds include N-ethyl-N-benzyl-N-[p-(trifluoromethyl)benzyl]-, N-(p-cyanobenzyl)-, N-(carbomethoxymethyl)-, and N-(cyanomethyl)nicotinamides. The values of delta()13(C) for all the ring carbons increase with increasing electron-withdrawing power of the N-alkyl substituent. The value for C-4 increases the most, a range of 2.4 ppm in this series, whereas those for other atoms increase on the order of 1 ppm. The value of delta()15(N) for N-1 decreases with increasing electron-withdrawing power over a range of 20 ppm. The NMR data indicate that inductive electron withdrawal by N-alkyl substituents polarizes the pi-electron system to decrease electron density on ring carbons and increase electron density on the ring nitrogen. The values of log k (second order) for reduction of these compounds by NaBH(3)CN are proportional to the values of delta()13(C) for C-4 and inversely proportional to delta()15(N) for N-1. The reduction potentials are proportional to delta()13(C). The substituent effects are qualitatively similar to the substrate-induced electrostatic effects on the nicotinamide ring of NAD(+) at the active site of UDP-galactose 4-epimerase (Burke, J. R.; Frey, P. A. Biochemistry 1993, 32, 13220-13230). However, they differ quantitatively in that the upfield perturbation at N-1 is smaller in the enzyme and the signal for C-6 is also shifted upfield. The substrate-induced enzymatic perturbation of electron density at C-4 of NAD(+) quantitatively accounts for its increase in reactivity at the active site, but the perturbation at N-1 is less closely correlated with reactivity.     

NMR of fd coat protein.

The conformations of the major coat protein of a filamentous bacteriophage can be described by nuclear magnetic resonance spectroscopy of the protein and the virus. The NMR experiments involve detection of the 13C and 1H nuclei of the coat protein. Both the 13C and 1H nuclear magnetic resonance (NMR) spectra show that regions of the polypeptide chain have substantially more motion than a typical globular protein. The fd coat protein was purified by gel chromatography of the SDA solubilized virus. Natural abundance 13C NMR spectra at 38 MHz resolve all of the nonprotonated aromatic carbons from the three phenylalanines, two tyrosines, and one tryptophan of the coat protein. The alpha carbons of the coat protein show at least two different classes of relaxation behavior, indicative of substantial variation in the motion of the backbone carbons in contrast to the rigidity of the alpha carbons of globular proteins. The 1H spectrum at 360 MHz shows all of the aromatic carbons and many of the amide protons. Titration of a 1H spectra gives the pKas for the tyrosines.     

Nuclear magnetic resonance spectroscopy. Analysis of the 1H and 13C spectra of Br13CH213CH2Br

The ¹H and ¹³C NMR spectra of 1,2-dibromoethane-¹³C₂ have been analyzed to determine the magnitude (38·9 Hz) and sign (positive) of ¹J(C? C) relative to those of ³J(H? H) (positive). This type of coupling appears to be rather insensitive to the presence of bromine or methyl as substituents on the carbons.     

Li4Ti5O12 Nanoparticles Prepared with Gel-hydrothermal Process as a High Performance Anode Material for Li-ion Batteries

Li₄Ti₅O₁₂ (LTO) nanoparticles were prepared by gel‐hydrothermal process and subsequent calcination treatment. Calcination treatment led to structural water removal, decomposition of organics and primary formation of LTO. The formation temperature of spinel LTO nanoparticles was lower than that of bulk materials counterpart prepared by solid‐state reaction or by sol‐gel processing. Based on the thermal gravimetric analysis (TG) and differential thermal gravimetric (DTG), samples calcined at different temperatures (350, 500 and 700°C) were characterized by X‐ray diffraction (XRD), field emitting scanning electron microscopy (FESEM), transmission electron microscopy (TEM), cyclic voltammogram and charge‐discharge cycling tests. A phase transition during the calcination process was observed from the XRD patterns. And the sample calcined at 500°C had a distribution of diameters around 20 nm and exhibited large capacity and good high rate capability. The well reversible cyclic voltammetric results of both electrodes indicated enhanced electrochemical kinetics for lithium insertion. It was found that the Li₄Ti₅O₁₂ anode material prepared through gel‐hydrothermal process, when being cycled at 8 C, could preserve 76.6% of the capacity at 0.3 C. Meanwhile, the discharge capacity can reach up to 160.3 mAh·g^?1 even after 100 cycles at 1 C, close to the theoretical capacity of 175 mAh·g^?1. The gel‐hydrothermal method seemed to be a promising method to synthesize LTO nanoparticles with good application in lithium ion batteries and electrochemical cells.     

A (13)C INADEQUATE and HF-GIAO study of C(60)H(2) and C(60)H(6) identification of ring currents in a 1,2-dihydrofullerene

The hydrofullerenes C(60)H(2) (1) and C(60)H(6) (2) have been prepared in (13)C-enriched form and 2D INADEQUATE NMR spectra were measured. These spectra have provided unambiguous (13)C assignments for 2, and nearly unambiguous assignments for 1. In both cases, the most downfield resonances are immediately adjacent to the sp(3) carbons, despite the fact that these carbons are the least pyramidalized carbons in the molecule. Typically, (13)C chemical shifts move downfield with increasing pyramidalization (THETA(p)), but in these systems there is no strong correlation between THETA(p) and delta. HF-GIAO calculations are able to predict the chemical shifts, but provide little chemical insight into the origin of these chemical shifts. London theory reveals a significant paramagnetic ring current in 1, a feature that helps explain the (1)H shifts in these compounds and may contribute to the (13)C chemical shifts as well.     

Principal component analysis and response surface methodology: optimization for H2 evolution from water catalyzed adopting V–Bi under visible light

Energy generation by photocatalytic water splitting with semiconductors under visible light is an effective method for generating pollution-free energy. In this work, a highly efficient vanadium pentoxide (V₂O₅)-based composite photocatalyst was prepared by hydrothermal calcination. The preparation conditions were optimized using single factor experiments, factor analysis (FA), principal component analysis (PCA), and response surface method (Design Expert). The results showed that the optimal preparation conditions were 6% Bi₂S₃ loading, 10 h hydrothermal time, 175.0°C hydrothermal temperature, 4.0 h calcination time, and a calcination temperature of 400.0°C. The results of FA and PCA analysis showed that the hydrothermal temperature, calcination time, and calcination temperature were the three main influencing factors. According to the optimization analysis using the response surface method, the highest hydrogen production rate (590.151 μmol/(g?h)) was obtained at a hydrothermal temperature of 168.74°C, a calcination time of 3.97 h, and a calcination temperature of 390.15°C. The quantum yield of the catalyst was 27.71%.