pH‐Tunable Hydrogelators for Water Purification: Structural Optimisation and Evaluation

A focused library of potential hydrogelators each containing two substituted aromatic residues separated by a urea or thiourea linkage have been synthesised and characterized. Six of these novel compounds are highly efficient hydrogelators, forming gels in aqueous solution at low concentrations (0.03–0.60 wt %). Gels were formed through a pH switching methodology, by acidification of a basic solution (pH 14 to ≈4) either by addition of HCl or via the slow hydrolysis of glucono‐δ‐lactone. Frequently, gelation was accompanied by a dramatic switch in the absorption spectra of the gelators, resulting in a significant change in colour, typically from a vibrant orange to pale yellow. Each of the gels was capable of sequestering significant quantities of the aromatic cationic dye, methylene blue, from aqueous solution (up to 1.02 g of dye per gram of dry gelator). Cryo‐transmission electron microscopy of two of the gels revealed an extensive network of high aspect ratio fibers. The structure of the fibers altered dramatically upon addition of 20 wt % of the dye, resulting in aggregation and significant shortening of the fibrils. This study demonstrates the feasibility for these novel gels finding application as inexpensive and effective water purification platforms.     

Cyclohexane bis-urea compounds for the gelation of water and aqueous solutions

A new class of efficient hydrogelators has been developed by a simple modification of the peripheral substituents of cyclohexane bis-urea organogelators with hydrophilic hydroxy or amino functionalities. These bis-urea hydrogelators were synthesised in two or three steps using an alternative procedure to the common isocyanate method. Gelation was obtained with organic solvents, water and strongly basic aqueous solutions like 25% ammonia. Hydrogelation was found to depend on a delicate balance between the hydrophobicity of the alkyl chains, hydrophilicity of the terminal substituents and the enantiomeric purity of the compound. The hydrogels consisted of a network of fibers, in which all urea groups are involved in intermolecular hydrogen bonding. Most likely, gelation is driven by hydrophobic interactions of the methylene units, whereas hydrogen bond formation between the urea groups provides the necessary anisotropy of the aggregation and the high thermal stability of the gels.     

Optically transparent hydrogels from an auxin-amino-acid conjugate super hydrogelator and its interactions with an entrapped dye

Low-molecular-weight organic hydrogelators (LMHGs) that can rigidify water into soft materials are desirable in various applications. Herein, we report the excellent hydrogelating properties of a simple synthetic auxin-amino-acid conjugate, naphthalene-1-acetamide of L-phenylalanine (1-NapF, M(w)=333.38?Da), which gelated water even at 0.025?wt?%, thereby making it the most-efficient LMHG known. Optically transparent gels that exhibited negligible scattering in the range 350-900?nm were obtained. A large shift from the theoretical pK(a) value of the gelator was observed. The dependence of the minimum gelator concentration (MGC) and the gel-melting temperatures on the pH value indicated the importance of H-bonding between the carboxylate groups on adjacent phenylalanine molecules in the gelator assembly. FTIR spectroscopy of the xerogels showed a β-sheet-like assembly of the gelator. Variable-temperature (1)H?NMR spectroscopy demonstrated that π stacking of the aromatic residues was also partly involved in the gelator assembly. TEM of the xerogel showed the presence of a dense network of thin, high-aspect-ratio fibrillar assemblies with diameters of about 5?nm and lengths that exceeded a few microns. Rheology studies showed the formation of stable gels. The entrapment of water-soluble dyes afforded extremely fluorescent gels that involved the formation of J-aggregates by the dye within gel. A strong induced-CD band established that the RhoB molecules were interacting closely with the chiral gelator aggregates. H-bonding and electrostatic interactions, rather than intercalation, seemed to be involved in RhoB binding. The addition of chaotropic reagents, as well as increasing the pH value, disassembled the gel and promoted the release of the entrapped dye with zero-order kinetics.     

(S)-(+)-Ibuprofen-based hydrogelators: an approach toward anti-inflammatory drug delivery

We have synthesized (S)-(+)-ibuprofen-based hydrogelators that feature dipeptide linkages. In aqueous media, one of these hydrogelators formed robust gels that were stable for several months. Enzyme-mediated hydrolysis offers a route toward the sustained release of this anti-inflammatory agent.     

Effect of C-terminal modification on the self-assembly and hydrogelation of fluorinated Fmoc-Phe derivatives

The development of hydrogels resulting from the self-assembly of low molecular weight (LMW) hydrogelators is a rapidly expanding area of study. Fluorenylmethoxycarbonyl (Fmoc) protected aromatic amino acids derived from phenylalanine (Phe) have been shown to be highly effective LMW hydrogelators. It has been found that side chain functionalization of Fmoc-Phe exerts a significant effect on the self-assembly and hydrogelation behavior of these molecules; fluorinated derivatives, including pentafluorophenylalanine (F(5)-Phe) and 3-F-phenylalanine (3-F-Phe), spontaneously self-assemble into fibrils that form a hydrogel network upon dissolution into water. In this study, Fmoc-F(5)-Phe-OH and Fmoc-3-F-Phe-OH were used to characterize the role of the C-terminal carboxylic acid on the self-assembly and hydrogelation of these derivatives. The C-terminal carboxylic acid moieties of Fmoc-F(5)-Phe-OH and Fmoc-3-F-Phe-OH were converted to C-terminal amide and methyl ester groups in order to perturb the hydrophobicity and hydrogen bond capacity of the C-terminus. Self-assembly and hydrogelation of these derivatives was investigated in comparison to the parent carboxylic acid compounds at neutral and acidic pH. It was found that hydrogelation of the C-terminal acids was highly sensitive to solvent pH, which influences the charge state of the terminal group. Rigid hydrogels form at pH 3.5, but at pH 7 hydrogel rigidity is dramatically weakened. C-terminal esters self-assembled into fibrils only slowly and failed to form hydrogels due to the higher hydrophobicity of these derivatives. C-terminal amide derivatives assembled much more rapidly than the parent carboxylic acids at both acidic and neutral pH, but the resultant hydrogels were unstable to shear stress as a function of the lower water solubility of the amide functionality. Co-assembly of acid and amide functionalized monomers was also explored in order to characterize the properties of hybrid hydrogels; these gels were rigid in unbuffered water but significantly weaker in phosphate buffered saline. These results highlight the complex nature of monomer/solvent interactions and their ultimate influence on self-assembly and hydrogelation, and provide insight that will facilitate the development of optimal amino acid LMW hydrogelators for gelation of complex buffered media.     

Features of the Interaction of Alcian Blue with Gels Based on Copolymer of <Emphasis Type="Italic">N</Emphasis>-Vinylcaprolactam and Methacrylic Acid

The interaction of N-vinylcaprolactam–methacrylic acid copolymer hydrogel and N-vinylcaprolactam homopolymer hydrogel with alcian blue in aqueous solutions is studied. It is shown that copolymer gel are thermo- and pH-sensitive. Dye sorption by the copolymer gel and gel swelling degree depends on the pH of the solution. The features of the system behavior resulting from the pH sensitivity of both the gel and the dye are shown. The thermocollapse of gels incubated in aqueous solutions of alcian blue is studied. It is shown that the transition temperature of N-vinylcaprolactam–sodium methacrylate copolymer gel to the collapsed state decreases with the dye absorption. The temperature-induced collapse of homopolymer gels in dye solutions is reversible, while the copolymer gel mass restores incompletely during the return temperature decrease. The dye absorption by the copolymer gel leads to decreased hysteresis.     

Peptide Conjugates of a Nonsteroidal Anti‐Inflammatory Drug as Supramolecular Gelators: Synthesis,Characterization, and Biological Studies

Indomethacin ( IND ), which is a well‐known nonsteroidal anti‐inflammatory drug (NSAID), was conjugated with various naturally occurring amino acids. Most of these bioconjugates were capable of gelling pure water, a solution of NaCl (0.9 wt %), and phosphate‐buffered saline (pH 7.4), as well as a few organic solvents. The gels were characterized by table‐top and dynamic rheology, and electron microscopy. Variable‐temperature ¹H NMR spectroscopy studies on a selected gel were performed to gain insights into the self‐assembly process during gel formation. Both 1D and 2D hydrogen‐bonded networks were observed in the single‐crystal structures of two of the gelators. Plausible biological applications of the hydrogelators were evaluated with the ultimate aim of drug delivery in a self‐delivery fashion. All hydrogelators were stable in phosphate‐buffered saline at pH 7.4 at 37 °C, and biocompatible in mouse macrophage RAW 264.7 cell line (3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide assay). Two of the most biocompatible hydrogelators displayed an anti‐inflammatory response comparable to that of the parent drug IND in prostaglandin E₂ assay. Release of the bioconjugates into the bulk solvent interfaced with the corresponding hydrogels indicated their plausible future application in drug delivery.     

Fibrous assemblies and water gelation in mixtures of lysine with sodium alkyl sulfates

Thermoresponsive, pH-sensitive fibrous structures and gels are formed in aqueous mixtures of the amino acid lysine with oppositely charged sodium alkyl sulfate surfactants. The formation of these assemblies depends on the chain length of the surfactant, which is varied between 8 and 16, the chirality and degree of protonation of the amino acid, and the molar ratio of these species. Self-assembly of the fibers occurs when specific lysine enantiomers are in solution and for pH conditions in which the majority of the amine groups are protonated (i.e., at near-equimolar amounts of HCl and lysine). Racemic mixtures of lysine do not form fibers with sodium dodecyl sulfate. Micelles are the fiber precursors, and the fibers, which can be hundreds of micrometers long, entangle to form gels. With increasing temperature, the gels melt, the fibers dissolve, and a single micellar phase forms. The micelles elongate with decreasing pH when the acid concentration is greater than equimolar with respect to lysine, and they shrink with increasing temperature.     

Supramolecular Self-organization of Potential Hydrogelators on Attracting Surfaces

This article highlights the aggregation behaviour of potential low molecular weight hydrogelators on attracting surfaces. Our goal was the development of a method, which enables the finding of new hydrogelators that are not easily recognizable as such because they only form instable or no hydrogels in aqueous solution. To this end, a series of negatively charges azo-dyes was synthesized and positive charged glass slides were immersed into their aqueous solutions. All dyes showed supramolecular organization and significant concentration on the attracting glass surface. Microscopic investigations mostly revealed the formation of crystals. However, one compound, (1-(2-n-octylphenylazo)-2-hydroxy-6-naphthalenesulphonate, selectively formed a hydrogel on the surface whereas it does not gel in aqueous solution. This reveals the hydrogel as the stable form of this compound under equilibrium conditions. This method of surface-induced hydrogelation might facilitate the identification of new hydrogelators. Further more, it might also allow the mimicking of surface gelation as a process of biological relevance.     

Optically Transparent Hydrogels from an Auxin–Amino‐Acid Conjugate Super Hydrogelator and its Interactions with an Entrapped Dye

Low‐molecular‐weight organic hydrogelators (LMHGs) that can rigidify water into soft materials are desirable in various applications. Herein, we report the excellent hydrogelating properties of a simple synthetic auxin–amino‐acid conjugate, naphthalene‐1‐acetamide of L ‐phenylalanine ( 1‐NapF , M_w=333.38 Da), which gelated water even at 0.025 wt %, thereby making it the most‐efficient LMHG known. Optically transparent gels that exhibited negligible scattering in the range 350–900 nm were obtained. A large shift from the theoretical pK_a value of the gelator was observed. The dependence of the minimum gelator concentration (MGC) and the gel‐melting temperatures on the pH value indicated the importance of H‐bonding between the carboxylate groups on adjacent phenylalanine molecules in the gelator assembly. FTIR spectroscopy of the xerogels showed a β‐sheet‐like assembly of the gelator. Variable‐temperature ¹H NMR spectroscopy demonstrated that π stacking of the aromatic residues was also partly involved in the gelator assembly. TEM of the xerogel showed the presence of a dense network of thin, high‐aspect‐ratio fibrillar assemblies with diameters of about 5 nm and lengths that exceeded a few microns. Rheology studies showed the formation of stable gels. The entrapment of water‐soluble dyes afforded extremely fluorescent gels that involved the formation of J‐aggregates by the dye within gel. A strong induced‐CD band established that the RhoB molecules were interacting closely with the chiral gelator aggregates. H‐bonding and electrostatic interactions, rather than intercalation, seemed to be involved in RhoB binding. The addition of chaotropic reagents, as well as increasing the pH value, disassembled the gel and promoted the release of the entrapped dye with zero‐order kinetics.     

Low molecular mass cationic gelators derived from deoxycholic acid: remarkable gelation of aqueous solvents

During the past decade, the study of molecular self-assembly and network formation from small molecule gelators has become one of the most active areas of supramolecular chemistry. A serendipitous discovery of the gelation of a cationic bile salt (4) led us to investigate the aggregation properties of this new class of cationic hydrogelators. This article summarizes the recent efforts on the study of side chain structure-aggregation property relationship of cationic bile salts. Bile acid analogs with a quaternary ammonium group on the side chain were found to efficiently gel aqueous salt solutions. Some of the cationic bile salts gelled water alone and many of them gelled aqueous salt solutions even in the presence of organic co-solvents (≤20%) such as ethanol, methanol, DMSO, and DMF. These gels showed interconnected fibrous networks. Unlike natural anionic bile salt gels (reported for NaDC and NaLC), the cationic gels reported here are pH independent. Cationic gels derived from DCA showed more solid-like rheological response compared to natural NaDC gels studied earlier by Tato et al.     

Clove oil prevents glycyrrhizin gel formation in aqueous solution

One persistent problem with using therapeutic concentrations of glycyrrhizin (GZ) is that, at these high concentrations, it forms a gel in an aqueous solution. We previously solved this problem by dissolving GZ in a highly concentrated phosphate buffer. Unfortunately, the resulting GZ solution has a hyperosmotic pressure that renders it unsuitable for use in patients. The aim of this study was to prepare a highly concentrated GZ solution having an osmotic pressure ratio of 1 and a pH of 7.4. By adding small amounts of oil and using a 100 mM phosphate buffer, we achieved an emulsified GZ solution that is stable at room temperature and has a physiological osmotic pressure and pH. When clove oil was used as an emulsifier, the gel formation temperature of GZ solution decreased appreciably compared to that of GZ solution without clove oil. Using scanning electron microscopy (SEM), we examined the detailed characteristics of GZ gels prepared from solutions with or without clove oil. SEM of cross sections of GZ gels revealed an irregular structure in gels prepared with clove oil, indicating that clove oil prevented the formation of the intermolecular GZ networks typically characterized by gels derived from pure GZ solutions.     

Organogel-hydrogel transformation by simple removal or inclusion of N-Boc-protection

Development of organo- and hydrogelators is on the rise because of their extensive applications, from advanced materials to biomedicine. However, designing both types of gelator from a common structural scaffold is challenging, and becomes more significant if transformation between them can be achieved by a simple method. The present work reports the design and synthesis of both organo- and hydrogelators from amino acid/peptide-based amphiphilic precursors with a naphthyl group at the N terminus and a primary amine-containing hydrophilic ethyleneoxy unit at the C terminus. In alkaline medium, tert-butyloxycarbonyl (Boc) protection at the primary amine of the amphiphiles resulted in efficient organogelators (minimum-gelation concentration (MGC)=0.075-1.5% w/v). Interestingly, removal of the Boc protection from the ethyleneoxy unit, under acidic conditions, yielded amphiphiles capable of gelating water (MGC=0.9-3.0% w/v). Simple protection and deprotection chemistry was used to achieve transformation between the organogel and hydrogel by alteration of the pH. Combinations of different aliphatic and aromatic amino acids were investigated to discover their cumulative effect on the gelation properties. Field-emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) were employed to investigate the supramolecular morphology of the thermoreversible gels. Spectroscopic investigations (FTIR, photoluminescence, XRD) revealed that noncovalent interactions, such as hydrogen bonding, π-π stacking, and van der Waals interactions play a decisive role in self-assembled gelation.     

Encapsulation of dye molecules and nanoparticles in hollow organogel fibers of a nonchiral polyurethane model compound

We present the case of a nonchiral organogelator that forms hollow fibers and encapsulates silver nanoparticles (SNP) and a dye molecule. The biscarbamate molecule (a model compound for polyurethanes), which has two hydrogen-bonding motifs symmetrically attached to n-dodecyl side chains (C(12)), gels benzonitrile with hollow fibrillar morphology. The C(12) molecules form sheets that eventually wrap into hollow fibers to form the gel network. Herein, two-component gels were prepared with C(12) as one component and SNP, phthalocyanine (Pc), or perylene (Pe) as the other. Microscopic analysis and partial melting experiments confirmed the inclusion of the silver nanoparticles and phthalocyanine into the hollow fibers. On the other hand, Pe molecules tend to form crystals at the outer surface of the C(12) fibers, which results in a significant increase in the width of the gel fibers. This difference in the behavior of Pc and Pe molecules were accounted for by their crystal geometry and significantly different crystal growth rate compared with that of C(12) fiber formation in the gels. Pc crystallizes in a needle shape that facilitates occlusion in the gel fibers, whereas Pe forms large platelets. X-ray diffraction and spectroscopic analysis of the two-component gels along with their neat components confirmed that there was no change in the packing behavior of the Pc and Pe molecules in the gels. Therefore, these are examples of two-component physical gels in which the Pc crystals are occluded within the hollow fibers of C(12) by physical mixing of the components without the aid of any inter-molecular interactions between the different components. We have thus shown that lumen-loaded gel fibers with nanoparticles and dye molecules can be prepared by the two-component gel route, provided that the above growth rate, shape, and size conditions are satisfied.     

Study of catalytic reduction and photodegradation of methylene blue by heterogeneous catalyst

The photocatalytic degradation of methylene blue is investigated in aqueous solution containing CoS/nanoAl-MCM-41 photocatalyst under visible light. The catalyst is characterized by X-ray diffraction (XRD), UV-vis diffused reflectance spectra (UV-vis DRS) and transmission electron microscopy (TEM) techniques. The effect of CoS, nanoAl-MCM-41 support and different wt% of CoS over the support on the photocatalytic degradation and influence of parameters such as CoS loading, catalyst amount, pH and initial concentration of methylene blue on degradation are evaluated. Hypsochromic effects (i.e. blue shifts of spectral bands) resulting from N-demethylation of the dimethylamino group in methylene blue occurs in presence of CoS/nanoAl-MCM-41 under ambient condition. Meanwhile, the bleaching of methylene blue MB, by sulfide ion, in an aqueous solution is studied in the presence nanoAl-MCM-41 catalyst. In the presence of sulfide ions, MB is bleached to its colorless leuco (LMB) and MBH(2)(+) forms. In an acidified solution (pH<2) the bleaching process generates LMB and by changing pH between 2.0 and 7.0 bleaching of MB dye to MBH(2)(+) form is observed. Using nanoAl-MCM-41 with encapsulated CoS nanoparticles only causes demethylation of MB in aqueous solution.     

Tuning the thermotropic and lyotropic properties of liquid-crystalline terpyridine ligands

A rational synthetic strategy is developed to provide compact and simple terpyridine (terpy) mesogens that show liquid-crystallinity both as pure compounds and in organic solution (amphotropic compound). The use of a central 4-methyl-3,5-diacylaminophenyl platform equipped with two lateral aromatic rings, each bearing three appended aliphatic chains, allows connection of a 2,2':6',2'-terpyridine fragment through a polar group such as an ester, amide, or flat conjugated alkyne linker. For the T(12)ester and T(12)amide scaffolds, the mesophase is best described as a lamellar phase, in which the molecules self-assemble into columnar stacks held together in layers. In the T(12)amide case, the additional amide link results in significant stabilization of the lamellar phase. The driving forces for the appearance of columnar ordering are the hydrogen-bonding interactions of the amide groups, which induce head-to-tail pi-stacking of the terpy subunits. Replacing the polar linker by a nonpolarized but linear alkyne spacer, as in the T(12)ethynyl compound, provides a columnar mesophase organized in a rectangular lattice of p2gg symmetry. In this arrangement, two nondiscotic molecules arranged into dimers by hydrogen bonding and pi-pi stacking pile up in a head-to-tail manner to form columns. In addition, the T(12)amide compound proves to be an excellent gelator of cyclohexane, linear alkanes, and DMSO. The resulting robust and transparent gels are birefringent and formed by large aggregates that are readily aligned by shear-flow. TEM and freeze-fracture microscopy reveal that the gels have an original layered morphology made of fibers.     

Efficient precipitation of dyes from dilute aqueous solutions of ionic liquids.

The addition of only approximately 1.7 wt% (approximately 0.06 M) ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate to aqueous solutions of six popular cationic dyes resulted in the precipitation of almost all of the dye from the solution.     

Adsorption Characteristics of Organic Dyes In Aqueous Solutions On Mixed-Oxide Gels. Silica-Containing Mixed-Oxide Gels

Abstract

Adsorption characteristics of four types of organic dyes in aqueous solutions on seven silica-containing mixed-oxide gels were investigated. C.I. Basic Red 18 was adsorbed well on all the gels. Silica-magnesia, which was prepared by the homogeneous precipitation, showed higher adsorptive ability for all the dyes than the other adsorbents.

It was proved from the examinations that the initial pH of dye solution, the composition of gel, and the precipitation method of gels affected the adsorptive ability.     

Dye affinity hollow fibers for albumin purification

Reactive Green HE 4BD was immobilized on polyamide (PA) hollow fibers for human serum albumin (HSA) adsorption from both aqueous solutions and human plasma. Different amounts of Reactive Green HE 4BD were incorporated on the PA hollow fibers by changing the dye attachment conditions, i.e. the initial dye concentration and the addition of sodium carbonate and sodium chloride. The maximum amount of dye attachment was obtained as 39.4 micromol x g(-1) when the hollow fibers were treated with 3 M HCl for 30 min before performing the dye attachment. HSA adsorption onto unmodified and dye-attached hollow fibers was investigated batchwise. The non-specific adsorption of HSA was low (6.0 mg/g hollow fiber). Dye attachment onto the hollow fibers significantly increased the HSA adsorption (86.7 mg/g). The maximum HSA adsorption was observed at pH 5.0. Higher HSA adsorption was observed from human plasma (198 mg HSA/g). The desorptions were performed by adding 0.1 M Tris/HCl buffer containing 0.5 M NaSCN or 1.0 M NaCl to the HSA solutions in which adsorption equilibria had been reached. The desorption results demonstrated that the adsorption of HSA to the adsorbent was reversible. Chemical structure of Reactive Green HE-4BD.     

Bi-phobic cellulose fibers derivatives via surface trifluoropropanoylation

The surface modification of cellulose fibers with 3,3,3-trifluoropropanoyl chloride (TFP) was studied in a toluene suspension. The characterization of the modified fibers was performed by elemental analysis, Fourier transform infrared (FTIR), 13C-solid-state NMR, X-ray diffraction, thermogravimetry, and surface analysis (XPS, ToF-SIMS, and contact angles measurements). The degree of substitution (DS) of the ensuing trifluoropropanoylated fibers ranged from less than 0.006 to 0.30, and in all instances the fibers' surface acquired a high hydrophobicity and lipophobicity resulting from a drastic reduction in its energy. The hydrolytic stability of these cellulose derivatives was also evaluated and shown to be permanent in time in the presence of neutral water, still appreciable in basic aqueous solution at pH 9, but, as expected quite poor at pH 12.