Hybrid Battery-Capacitor System based on Li4Ti5O12Anode and PTPAn Cathode北大核心CSCD

Owing to its high safe, high rate and long life characteristics, lithium titanate (Li4Ti5O12) anode material has attracted extensive attention in recent years, and many efforts are being made to develop the Li4Ti5O12based high performance hybrid supercapacitors and Li-ion batteries. Herein, we prepared the organic cathode material polytriphenylamine (PTPAn) through chemical oxidation and polymerization of triphenylamine (TPAn), and investigated its charge storage mechanism and electrode kinetics with the typical electrochemical methods in an organic electrolyte. It was demonstrated that the PTPAn exhibited the reversible capacity of 85 mA·g-1. The charge storage depended on the reversible adsorption/desorption of anion, which is not controlled by the diffusion process, and thus, can be considered as the pseudocapacitive behavior. Then, the PTPAn cathode was coupled with the Li4Ti5O12anode to form a hybrid capacitor/battery system with high power and improved energy density. Finally, the inherent drawback and the challenge for practical application of such an organic cathode are briefly discussed. © Journal of Electrochemistry 2018.     

Dendrite-structured FeF2 consisting of closely linked nanoparticles as cathode for high-performance lithium-ion capacitors

Lithium-ion capacitors(LICs)are regarded as a good choice for next-generation energy storage devices,which are expected to exhibit high energy densities,high power densities,and ultra-long cycling stability.Nevertheless,only a few battery-type cathode materials with limited kinetic properties can be employed in LICs,and their electrochemical properties need to be optimized urgently.Here,we exploit a new dendrite-structured FeF₂ consisting of closely linked primary nanoparticles using a facile solvothermal method combined with the subsequent annealing treatment.This particular architecture has favorable transport pathways for both lithium ions and electrons and exhibits an ultrafast chargedischarge capability with high reversible capacities.Furthermore,a well-designed LIC employing the prepared dendrite-structured FeF₂ as the battery-type cathode and commercialized activated carbon(AC)as supercapacitor-type anode was constructed in an organic electrolyte containing Li ions.The LIC operates at an optimal voltage range of 1.1-3.8 V and shows a maximum high energy density of 152 W h kg^-1 and a high power density of 4900 W kg^-1 based on the total mass of cathode and anode.Long-term cycling stability(85%capacity retention after 2000 cycles)was achieved at 1 A g^-1.This work suggests that the dendrite-structured FeF₂ is a prime candidate for high-performance LICs and accelerates the development of hybrid ion capacitor devices.     

Reaction mechanism and additional lithium storage of mesoporous MnO_2 anode in Li batteries

Nanostructured transition metal oxides,employed as anode materials for lithium-ion batteries,exhibit a higher capacity than the theoretical capacity based on the conversion reaction.To date,the reasons behind this phenomenon are unclear.For the one-step evolution of anode material for lithium-ion batteries,it is essential to understand the lithium storage reaction mechanism of the anode material.Herein,we provide a detailed report on the lithium storage and release mechanism of MnO2,using synchrotron-based X-ray techniques.X-ray diffraction and X-ray absorption spectroscopy results indicate that during the first discharge,MnO2 is reduced in the order of MnO2→LixMnO2(1相似文献   

A redox-active conjugated microporous polymer cathode for highperformance lithium/potassium-organic batteries

Organic redox-active materials have emerged as a class of electrode materials for rechargeable batteries due to their high redox activity,low cost,structure diversity and flexibility.However,the high solubility of organic small molecules in organic electrolytes commonly leads to the fast capacity decay with cycling.Herein,we report a redox-active conjugated microporous polymer of poly(pyrene-co-anthraquinone)(Py Aq)cathode material consisting of pyrene and anthraquinone units.Benefiting from the highly cross-linked polymer structure with insoluble nature in organic electrolytes,the high surface area and the plentiful redox-active carbonyl groups,the Py Aq cathode demonstrates outstanding electrochemical performances for both lithium-ion batteries(LIBs)and potassium-ion batteries(KIBs).Specifically,the Py Aq cathode for LIBs delivers a high reversible capacity of 169 m Ah g^-1 at the current density of 20 m A g^-1,a high rate capability(142 m Ah g^-1 at 1000 m A g^-1)and an excellent cycling stability for 4000 cycles.Additionally,the Py Aq cathode for KIBs also exhibits a high reversible capacity of143 m Ah g^-1 with a long cycling life over 800 cycles.The excellent electrochemical performance demonstrates that the newly developed Py Aq could be an attractive cathode material for the advanced energy storage technologies.     

High rate and cycling stable Li metal anodes enabled with aluminum-zinc oxides modified copper foam

Metallic Li is a promising anode material for high energy density batteries but it suffers from poor stability and formation of unsafe dendrites. Previous studies demonstrated that 3 D metal foams are able to improve the stability of Li metal but the properties of these foams are inherently limited. Here we report a facile surface modification approach via magnetron sputtering of mixed oxides that effectively modulate the properties of Cu foams for supporting Li metal with remarkable stability. We discovered that hybrid Li anodes with Li metal thermally infused to aluminum-zinc oxides(AZO) coated Cu foams have significantly improved stability and reactivity compared with pristine Li foils and Li infused to unmodified Cu foams. Full cells assembled with a Li Fe PO4 cathode and a hybrid anode maintained low and stable charge-transfer resistance(50) during 500 cycles in carbonate electrolytes, and exhibited superior rate capability(～100 m Ah g-1 at 20 C) along with better electrochemical reversibility and surface stability. The AZO modified Cu foams had superior mechanical strength and afforded the hybrid anodes with minimized volume change without the formation of dendrites during battery cycling. The rational construction of surface architecture to precisely control Li plating and stripping may have great implications for the practical applications of Li metal batteries.     

Recent progress in fluorinated electrolytes for improving the performance of Li–S batteries

Lithium–sulfur(Li–S) batteries represent a "beyond Li-ion" technology with low cost and high theoretical energy density and should fulfill the ever-growing requirements of electric vehicles and stationary energy storage systems. However, the sulfur-based conversion reaction in conventional liquid electrolytes results in issues like the so-called shuttle effect of polysulfides and lithium dendrite growth, which deteriorate the electrochemical performance and safety of Li–S batteries. Optimization of conventional organic solvents(including ether and carbonate) by fluorination to form fluorinated electrolytes is a promising strategy for the practical application of Li–S batteries. The fluorinated electrolytes, owing to the high electronegativity of fluorine, possesses attractive physicochemical properties, including low melting point,high flash point, and low solubility of lithium polysulfide, and can form a compact and stable solid electrolyte interphase(SEI) with the lithium metal anode. Herein, we review recent advancements in the development of fluorinated electrolytes for use in Li–S batteries. The effect of solvent molecular structure on the performance of Li–S batteries and the formation mechanism of SEI on the cathode and anode sides are analyzed and discussed in detail. The remaining challenges and future perspectives of fluorinated electrolytes for Li–S batteries are also presented.     

Boosting the Energy Density of Flexible Asymmetric Supercapacitor with Three Dimensional Fe2O3 Composite Brush Anode

Flexible asymmetric supercapacitor is fabricated with three dimensional(3D)Fe2O3/Ni(OH)2 composite brush anode and Ni(OH)2/MoO2 honeycomb cathode.Particularly for 3D composite brush anode,a layer of thin Fe2O3 film is firmly adhered on a 3D Ni brush current collector with the assist of Ni(OH)2,functioning as both adherence layer and pseudocapacitive active material.The unique 3D Ni brush current collector possesses large surface area and stretching architecture,which facilitate to achieve the composite anode with high gravimetric capacitance of 2158 F/g.In terms of cathode,Ni(OH)2 and MoO2 have a synergistic effect to improve the specific capacitance,and the resulting Ni(OH)2/MoO2 honeycomb cathode shows a very high gravimetric capacitance up to 3264 F/g.The asymmetric supercapacitor(ASC)has balanced cathode and anode,and exhibits an ultrahigh gravimetric capacitance of 1427 F/g and an energy density of 476 W·h/kg.The energy density of ASC is 3-4 times higher than those of other reported aqueous electrolyte-based supercapacitors and even comparable to that of commercial lithium ion batteries.The device also shows marginal capacitance degradation after 1000 cycles'bending test,demonstrating its potency in the application of flexible energy storage devices.     

Preparation of Li_4Ti_5O_(12) submicrospheres and their application as anode materials of rechargeable lithium-ion batteries

We report on the preparation of spinel Li4Ti5O12 submicrospheres and their application as anode materials of rechargeable lithium-ion batteries. The spinel Li4Ti5O12 submicrospheres are synthesized with three steps of the hydrolysis of TiCl4 to form rutile TiO2, the hydrothermal treatment of rutile TiO2 with LiOH to prepare an intermediate phase of LiTi2O4+δ, and the calcinations of LiTi2O4+δ to obtain spinel Li4Ti5O12. The as-prepared products are investigated by X-ray powder diffraction (XRD), scanning el...     

Asymmetric double-layer composite electrolyte with enhanced ionic conductivity and interface stability for all-solid-state lithium metal batteries

All-solid-state Li metal battery has been regarded as a promising battery technology due to its high energy density based on the high capacity of lithium metal anode and high safety based on the all solid state electrolyte without inflammable solvent.However,challenges still exist mainly in the poor contact and unstable interface between electrolyte and electrodes.Herein,we demonstrate an asymmetric design of the composite polymer electrolyte with two different layers to overcome the interface issues at both the cathode and the anode side simultaneously.At the cathode side,the polypropylene carbonate layer has enough viscosity and flexibility to reduce the inter-facial resistance,while at the Li anode side,the polyethylene oxide layer modified with hexagonal boron nitride has high mechanical strength to suppress the Li dendrite growth.Owing to the synergetic effect between different components,the asprepared double layer composite polymer electrolyte demonstrates a large electrochemical window of5.17 V,a high ionic conductivity of 6.1×10~(-4) S/cm,and a transfe rence number of 0.56,featuring excellent ion transport kinetics and good chemical stability.All-solid-state Li metal battery assembled with LiFePO_4 cathode and Li anode delivers a high capacity of 150.9 mAh/g at 25℃ and 0.1 C-rate,showing great potential for practical applications.     

LiF and LiNO3 as synergistic additives for PEO-PVDF/LLZTO-based composite electrolyte towards high-voltage lithium batteries with dual-interfaces stability

Solid electrolytes with desirable properties such as high ionic conductivity,wide electrochemical stable window,and suitable mechanical strength,and stable electrode-electrolyte interfaces on both cathode and anode side are essential for high-voltage all-solid-state lithium batteries(ASSLBs)to achieve excellent cycle stability.In this work,a novel strategy of using LiF and LiNO₃ as synergistic additives to boost the performance of PEO-PVDF/LLZTO-based composite solid electrolytes(CSEs)is developed,which also promotes the assembled high-voltage ASSLBs with dual-interfaces stability characteristic.Specifically,LiF as an inactive additive can increase the electrochemical stability of the CSE under high cut-off voltage,and improve the high-voltage compatibility between cathode and CSE,thus leading to a stable cathode/CSE interface.LiNO₃ as an active additive can lead to an enhanced ionic conductivity of CSE due to the increased free-mobile Li+and ensure a stable CSE/Li interface by forming stable solid electrolyte interphase(SEI)on Li anode surface.Benefiting from the improved performance of CSE and stable dualinterfaces,the assembled NCM622/9[PEO₁₅-LiTFSI]-PVDF-15 LLZTO-2 LiF-3 LiNO₃/Li cell delivers a high rate capacity of 102.1 mAh g^-1 at 1.0 C and a high capacity retention of 77.4%after 200 cycles at 0.5 C,which are much higher than those of the ASSLB assembled with additive-free CSE,with only 60.0 mAh g^-1 and 52.0%,respectively.Furthermore,novel cycle test modes of resting for 5 h at different charge states after every 5 cycles are designed to investigate the high-voltage compatibility between cathode and CSE,and the results suggest that LiF additive can actually improve the high-voltage compatibility of cathode and CSE.All the obtained results confirm that the strategy of using synergistic additives in CSE is an effective way to achieve high-voltage ASSLBs with dual-interfaces stability.     

P(VDF-HFP)-poly(sulfur-1,3-diisopropenylbenzene) functional polymer electrolyte for lithium–sulfur batteries

Lithium–sulfur(Li–S)battery as a high-energy density electrochemical energy storage system has attracted many researchers’attention.However,the shuttle effect of Li–S batteries and the challenges associated with lithium metal anode caused poor cycle performance.In this work,the organosulfide poly(sulfur-1,3-diisopropenylbenzene)(PSD)was prepared as cathode material and additive of P(VDFHFP)polymer electrolyte(P(VDF-HFP)).It was verified that P(VDF-HFP)polymer electrolyte with 10%PSD(P(VDF-HFP)-10%PSD)showed a higher ionic conductivities than that of liquid electrolyte up to2.27×10-3 S cm-1 at room temperature.The quasi-solid-state Li-S batteries fabricated with organosulfide cathode material PSD and P(VDF-HFP)based functional polymer electrolyte delivered good cycling stability(780 m Ah g-1 after 200 th cycle at 0.1 C)and rate performance(613 m Ah g-1 at 1 C).The good cycling performance could be attributed to the synergistic effect of components,including the interaction between polysulfides and polymer main chain in the organosulfide cathode,the sustained organic/inorganic hybrid stable SEI layer formed by polymer electrolyte additive PSD,the improved cathode/electrolyte interface and the good affinity between P(VDF-HFP)based functional polymer electrolyte and Li metal surface.This strategy herein may provide a new route to fabricate high-performance Li–S batteries through the organosulfide cathode and functional polymer electrolyte.     

SnS2/graphene nanocomposite: A high rate anode material for lithium ion battery

In this work,via a facile solvothermal route,we synthesized an anode material for lithium ion batteries(LIBs)—SnS_2 nanoparticle/graphene(SnS_2 NP/GNs) nanocomposite.The nanocomposite consists of SnS_2nanoparticles with an average diameter of 4 nm and graphene nanosheets without restacking.The SnS_2 nanoparticles are firmly anchored on the graphene nanosheets.As an anode material for LIBs,the nanocomposite exhibits good Li storage performance especially high rate performance.At the high current rate of 5,10,and 20 A/g,the nanocomposite delivered high capacities of 525,443,and 378 mAh/g,respectively.The good conductivity of the graphene nanosheets and the small particle size of SnS_2contribute to the electrochemical performance of SnS_2 NP/GNs.     

Enhancing interfacial stability in solid-state lithium batteries with polymer/garnet solid electrolyte and composite cathode framework

The solid-state lithium battery is considered as an ideal next-generation energy storage device owing to its high safety,high energy density and low cost.However,the poor ionic conductivity of solid electrolyte and low interfacial stability has hindered the application of solid-state lithium battery.Here,a flexible polymer/garnet solid electrolyte is prepared with poly(ethylene oxide),poly(vinylidene fluoride),Li6.75La3 Zr1.75Ta0.25O12,lithium bis(trifluoromethanesulfonyl)imide and oxalate,which exhibits an ionic conductivity of 2.0 ×10^-4 S cm^-1 at 55℃,improved mechanical property,wide electrochemical window(4.8 V vs.Li/Li+),enhanced thermal stabilities.Tiny acidic OX was introduced to inhibit the alkalinity reactions between Li6.75La3 Zr1.75Ta0.25O12 and poly(vinylidene fluoride).In order to improve the interfacial stability between cathode and electrolyte,an Al2 O3@LiNi0.5Co0.2Mn0.3O2 based composite cathode framework is also fabricated with poly(ethylene oxide) polymer and lithium salt as additives.The solid-state lithium battery assembled with polymer/garnet solid electrolyte and composite cathode framework demonstrates a high initial discharge capacity of 150.6 mAh g^-1 and good capacity retention of 86.7% after 80 cycles at 0.2 C and 55℃,which provides a promising choice for achieving the stable electrode/electrolyte interfacial contact in solid-state lithium batteries.     

High and ultra-stable energy storage from all-carbon sodium-ion capacitor with 3D framework carbon as cathode and carbon nanosheet as anode

Sodium-ion capacitors(SICs)are extremely promising due to the combined merits of high energy-power characteristics and considerable price advantage.However,it is still difficult to achieve high energypower outputs and cycle stability in a typical configuration of the metal-based battery-type anode and activated carbon capacitor-type cathode due to the kinetic mismatching.In this work,a carbon nanosheet(PSCS-600)with large interlayer spacing of 0.41 nm derived from the bio-waste pine cone shell was prepared.Besides,the covalent triazine framework derived carbon(OPDN-CTF-A)was obtained through ionothermal synthesis strategy,exhibiting beneficial hierarchical pores(0.5-6 nm)and high heteroatoms(5.6 at%N,6.6 at%O).On this basis,the all-carbon SICs were fabricated by the integration of PSCS-600 anode and OPDN-CTF-A cathode.The device delivered high energy density 111 Wh kg^-1,high power output of 14,200 W kg^-1 and ultra-stable cycling life(~90.7%capacitance retention after 10,000 cycles).This work provides new ideas in fabricating carbon-carbon architectural SICs with high energy storage for practical application.     

Embedding wasted hairs in Ti/PbO2 anode for efficient and sustainable electrochemical oxidation of organic wastewater

Despite of the hazardous risk of Pb²⁺leakage,lead dioxide has been attributed as a quasi-ideal anode material with high oxygen evolution potential,excellent conductivity,good stability and low cost in electrochemical oxidation wastewater treatment technique.In this study,a novel Ti/PbO₂ anode was fabricated by embedding raw materials that are readily and cheaply available,i.e.,hairs.The structure-activity relationship of the new electrode was firstly revealed by material an...     

A new anode material LiMoS_2 for use in rechargeable Lithium Ion Batteries

The novel applications of molybdenum disulfide in recent research were reviewed, such as in lubricant, catalyst and photoelectrochemical solar cells. Recently, we found that LiMoS2 is a good candidate for new anode materials for lithium ion batteries with high lithium storage capacity. Here, the anode material LiMoS2 was synthesized by a hydrothermal method at 150oC and the electrochemical characterization as an anode material for lithium ion batteries was examined. The preparation procedur…     

Towards high-performance lithium metal anodes via the modification of solid electrolyte interphases

Li metal has been regarded as one of the most promising anodes for high-energy-density storage systems due to its high theoretical capacity and lowest electrochemical potential.Unfortunately,an unstable and non-uniform solid electrolyte interphase(SEI)deriving from the spontaneous reaction between Li metal anode and electrolyte causes uneven Li deposition,resulting in the growth of Li dendrites and low Coulombic efficiency,which have greatly hindered the practical application of Li metal batteries.Thus,the construction of a stable SEI is an effective approach to suppress the growth of Li dendrites and enhance the electrochemical performances of Li metal anode.In this review,we firstly introduce the formation process of inferior SEI of Li metal anode and the corresponding challenges caused by the unstable SEI.Next,recent progresses to modify SEI layer through the regulation of electrolyte compositions and exsitu protective coating are summarized.Finally,the remained issues,challenges,and perspectives are also proposed on the basis of current research status and progress.     

From aqueous Zn-ion battery to Zn-MnO2 flow battery:A brief story

Aqueous Zn-ion battery(AZIB)has become an attractive technology because of its unique features of low cost,high safety and the eco-friendliness.MnO₂ is the model cathode material for AZIB since the first report on reversible Zn-MnO₂ battery,but recent studies have unveiled different charge storage mechanisms.Due to revamping of the electrochemistry and redesigning of the electrolyte and interface,there is tremendous performance enhancement in AZIB.This mini Review will first give a brief introduction of ZIB,including fundamentals of materials and components,and the progress in recent years.Then,a general classification of working mechanisms related to MnO₂ in neutral and mildly acidic electrolyte is elaborated.Our focus is put on the recent blossoming Zn-MnO₂ electrolytic mechanism,which has given birth to the Zn-MnO₂ redox flow batteries that are highly promising for large-scale static energy storage.     

Stabilizing the Electrochemistry of Lithium-Selenium Battery via In situ Gelated Polymer Electrolyte: A Look from Anode

Li metal possesses a high theoretical specific capacity,high electronic conductivity,and a low electrochemical potential,making it a promising anode material for building next-generation rechargeable metal batteries.In case conventional liquid electrolytes were used,and the anode using Li metal has been hindered by unstable(electro)chemistry at Li/electrolyte interface and the accompanied dendrite issue.Specifically,for the Li-Se batteries,the dissolution and shuttle of polyselenide intermediates lead to the deposition of poorly-conductive species on the anode,which further aggravates the chemical environment at the anode.In this work,we proposed to stabilize the Li-Se electrochemistry by constructing a gel polymer electrolyte via in situ gelations of conventional ether-based electrolytes at room temperature.The results demonstrate that the in situ gelated electrolyte helps to build electrochemically stable electrode/electrolyte interfaces and promote the efficient transfer of charge carriers across the interface.Compared with the liquid electrolytes,the gelated electrolyte shows improved chemical compatibility with the Li metal anode,which effectively alleviates the unfavorable side reactions and dendrite formation at the anode/electrolyte interface,and the polyselenide shuttle from the cathode to the anode.As a result,the Li-Se battery shows a higher Coulombic efficiency and improved cycling performance.     

Ag-modified hydrogen titanate nanowire arrays for stable lithium metal anode in a carbonate-based electrolyte

In the investigation of the next-generation battery anode,Li metal has attracted increasing attention owing to its ultrahigh specific capacity and low reduction potential.However,its low columbic efficiency,limited cycling life,and serious safety hazards have hindered the practical application of rechargeable Li metal batteries.Although several strategies have been proposed to enhance the electrochemical performance of Li metal anodes,most are centered around ether-based electrolytes,which are volatile and do not provide a sufficiently large voltage window.Therefore,we aimed to attain stable Li deposition/stripping in a commercial carbonate-based electrolyte.Herein,we have successfully synthesized hydrogen titanate(HTO)nanowire arrays decorated with homogenous Ag nanoparticles(NPs)(Ag@HTO)via simple hydrothermal and silver mirror reactions.The 3 D cross-linked array structure with Ag NPs provides preferable nucleation sites for uniform Li deposition,and most importantly,when assembled with the commercial LiNi_0.5Co0.2Mn_0.3O₂ cathode material,the Ag@HTO could maintain a capacity retention ratio of 81.2% at 1 C after 200 cycles,however the pristine Ti foil failed to do so after only 60 cycles.Our research therefore reveals a new way of designing current collectors paired with commercial high voltage cathodes that can create high energy density Li metal batteries.