Electron transport and redox reactions in carbon-based molecular electronic junctions

A unique molecular junction design is described, consisting of a molecular mono- or multilayer oriented between a conducting carbon substrate and a metallic top contact. The sp2 hybridized graphitic carbon substrate (pyrolyzed photoresist film, PPF) is flat on the scale of the molecular dimensions, and the molecular layer is bonded to the substrate via diazonium ion reduction to yield a strong, conjugated C-C bond. Molecular junctions were completed by electron-beam deposition of copper, titanium oxide, or aluminium oxide followed by a final conducting layer of gold. Vibrational spectroscopy and XPS of completed junctions showed minimal damage to the molecular layer by metal deposition, although some electron transfer to the molecular layer resulted in partial reduction in some cases. Device yield was high (>80%), and the standard deviations of junction electronic properties such as low voltage resistance were typically in the range of 10-20%. The resistance of PPF/molecule/Cu/Au junctions exhibited a strong dependence on the structure and thickness of the molecular layer, ranging from 0.13 ohms cm2 for a nitrobiphenyl monolayer, to 4.46 ohms cm2 for a biphenyl monolayer, and 160 ohms cm2 for a 4.3 nm thick nitrobiphenyl multilayer. Junctions containing titanium or aluminium oxide had dramatically lower conductance than their PPF/molecule/Cu counterparts, with aluminium oxide junctions exhibiting essentially insulating behavior. However, in situ Raman spectroscopy of PPF/nitroazobenzene/AlO(x)/Au junctions with partially transparent metal contacts revealed that redox reactions occurred under bias, with nitroazobenzene (NAB) reduction occurring when the PPF was biased negative relative to the Au. Similar redox reactions were observed in PPF/NAB/TiO(x)/Au molecular junctions, but they were accompanied by major effects on electronic behavior, such as rectification and persistent conductance switching. Such switching was evident following polarization of PPF/molecule/TiO2/Au junctions by positive or negative potential pulses, and the resulting conductance changes persisted for several minutes at room temperature. The "memory" effect implied by these observations is attributed to a combination of the molecular layer and the TiO2 properties, namely metastable "trapping" of electrons in the TiO2 when the Au is negatively biased.     

Electronic characteristics of fluorene/TiO2 molecular heterojunctions

The electronic properties of molecular junctions of the general type carbon/molecule/TiO2Au were examined as examples of "molecular heterojunctions" consisting of a molecular monolayer and a semiconducting oxide. Junctions containing fluorene bonded to pyrolyzed photoresist film (PPF) were compared to those containing Al2O3 instead of fluorene, and those with only the TiO2 layer. The responses to voltage sweep and pulse stimulation were strongly dependent on junction composition and temperature. A transient current response lasting a few milliseconds results from injection and trapping of electrons in the TiO2 layer, and occurred in all three junction types studied. Conduction in PPFTiO2Au junctions is consistent with space charge limited conduction at low voltage, then a sharp increase in current once the space charge fills all the traps. With fluorene present, there is a slower, persistent change in junction conductance which may be removed by a reverse polarity pulse. This "memory" effect is attributed to a redox process in the TiO2 which generates TiIII and/or TiII, which have much higher conductance than TiO2 due to the presence of conduction band electrons. The redox process amounts to "dynamic doping" of the TiO2 layer by the imposed electric field. The memory effect arises from a combination of the properties of the molecular and oxide layers, and is a special property of the molecular heterojunction configuration.     

Electron-beam evaporated silicon as a top contact for molecular electronic device fabrication

This paper discusses the electronic properties of molecular devices made using covalently bonded molecular layers on carbon surfaces with evaporated silicon top contacts. The Cu "top contact" of previously reported carbon/molecule/Cu devices was replaced with e-beam deposited Si in order to avoid Cu oxidation or electromigration, and provide further insight into electron transport mechanisms. The fabrication and characterization of the devices is detailed, including a spectroscopic assessment of the molecular layer integrity after top contact deposition. The electronic, optical, and structural properties of the evaporated Si films are assessed in order to determine the optical gap, work function, and film structure, and show that the electron beam evaporated Si films are amorphous and have suitable conductivity for molecular junction fabrication. The electronic characteristics of Si top contact molecular junctions made using different molecular layer structures and thicknesses are used to evaluate electron transport in these devices. Finally, carbon/molecule/silicon devices are compared to analogous carbon/molecule/metal junctions and the possible factors that control the conductance of molecular devices with differing contact materials are discussed.     

Redox-driven conductance switching via filament formation and dissolution in carbon/molecule/TiO2/Ag molecular electronic junctions

Carbon/molecule/TiO2/Au molecular electronic junctions show robust conductance switching, in which a metastable high conductance state may be induced by a voltage pulse which results in redox reactions in the molecular and TiO2 layers. When Ag is substituted for Au as the "top contact", dramatically different current/voltage curves and switching behavior result. When the carbon substrate is biased negative, an apparent breakdown occurs, leading to a high conductance state which is stable for at least several hours. Upon scanning to positive bias, the conductance returns to a low state, and the cycle may be repeated hundreds of times. Similar effects are observed when Cu is substituted for Au and for three different molecular layers as well as "control" junctions of the type carbon/TiO2/Ag/Au. The polarity of the "switching" is reversed when the Ag layer is between the carbon and molecular layers, and the conductance change is suppressed at low temperature. Pulse experiments show very erratic transitions between high and low conductivity states, particularly near the switching threshold. The results are consistent with a switching mechanism based on Ag or Cu oxidation, transport of their ions through the TiO2, and reduction at the carbon to form a metal filament.     

Measurement and statistical analysis of single-molecule current-voltage characteristics, transition voltage spectroscopy, and tunneling barrier height

We report on the measurement and statistical study of thousands of current-voltage characteristics and transition voltage spectra (TVS) of single-molecule junctions with different contact geometries that are rapidly acquired using a new break junction method at room temperature. This capability allows one to obtain current-voltage, conductance voltage, and transition voltage histograms, thus adding a new dimension to the previous conductance histogram analysis at a fixed low-bias voltage for single molecules. This method confirms the low-bias conductance values of alkanedithiols and biphenyldithiol reported in literature. However, at high biases the current shows large nonlinearity and asymmetry, and TVS allows for the determination of a critically important parameter, the tunneling barrier height or energy level alignment between the molecule and the electrodes of single-molecule junctions. The energy level alignment is found to depend on the molecule and also on the contact geometry, revealing the role of contact geometry in both the contact resistance and energy level alignment of a molecular junction. Detailed statistical analysis further reveals that, despite the dependence of the energy level alignment on contact geometry, the variation in single-molecule conductance is primarily due to contact resistance rather than variations in the energy level alignment.     

金属/分子/金属结的电子输运机理与表征

金属/分子/金属结是分子电子学中的基本单元.根据电子的相位是否发生改变,分子结中的电子输运可以分为相干输运和非相干输运两类.在实验上,分子结的表征方法可以分为电学性质表征和非电学性质表征两类.本文借助能级图,首先对分子结的电子输运机理作了简明解释.在此基础上,结合文献报道和本课题组此前的工作,对分子结的一些常用电学表征方法,包括电流-电压特性曲线、电流-时间曲线、电导统计柱状图、转变电压谱、散粒噪声测试、非弹性电子隧道谱和热电效应法进行了介绍.     

Anisotropic Conductivity at the Single‐Molecule Scale

In most junctions built by wiring a single molecule between two electrodes, the electrons flow along only one axis: between the two anchoring groups. However, molecules can be anisotropic, and an orientation‐dependent conductance is expected. Here, we fabricated single‐molecule junctions by using the electrode potential to control the molecular orientation and access individual elements of the conductivity tensor. We measured the conductance in two directions, along the molecular plane as the benzene ring bridges two electrodes using anchoring groups (upright) and orthogonal to the molecular plane with the molecule lying flat on the substrate (planar). The perpendicular (planar) conductance is about 400 times higher than that along the molecular plane (upright). This offers a new method for designing a reversible room‐temperature single‐molecule electromechanical switch that controllably employs the electrode potential to orient the molecule in the junction in either “ON” or “OFF” conductance states.     

Dithiocarbamate anchoring in molecular wire junctions: a first principles study

Recent experimental realization [J. Am. Chem. Soc., 127 (2005) 7328] of various dithiocarbamate self-assembly on gold surface opens the possibility for use of dithiocarbamate linkers to anchor molecular wires to gold electrodes. In this paper, we explore this hypothesis computationally. We computed the electron transport properties of 4,4'-bipyridine (BP), 4,4'-bipyridinium-1,1'-bis(carbodithioate) (BPBC), 4-(4'-pyridyl)-peridium-1-carbodithioate (BPC) molecule junctions based on the density functional theory and nonequilibrium Green's functions. We demonstrated that the stronger molecule-electrode coupling associated with the conjugated dithiocarbamate linker broadens transmission resonances near the Fermi energy. The broadening effect along with the extension of the pi conjugation from the molecule to the gold electrodes lead to enhanced electrical conductance for BPBC molecule. The conductance enhancement factor is as large as 25 at applied voltage bias 1.0 V. Rectification behavior is predicted for BPC molecular wire junction, which has the asymmetric anchoring groups.     

Analytical modeling of the junction evolution in single-molecule break junctions: towards quantitative characterization of the time-dependent process

The conductance through single-molecule junctions characterized by the break junction techniques consists of the through-space tunneling and through-molecule tunneling conductance, and the existence of through-space tunneling between the electrodes makes the quantitative extraction of the intrinsic molecular signals of single-molecule junctions challenging. Here, we established an analytic model to describe the evolution of the conductance of a single molecule in break junction measurements. The experimental data for a series of oligo(aryleneethynylene) derivatives validate the proposed model, which provides a modeling insight into the conductance evolution for the opening process in a "real" break junction experiment. Further modulations revealed that the junction formation probability and rupture distance of the molecular junction, which reflect the junction stability, will significantly influence the amplitude and position of the obtained conductance peak. We further extend our model to a diffusion and a chemical reaction process, for which the simulation results show that the break junction technique offers a quantitative understanding of these time-dependent systems, suggesting the potential of break junction techniques in the quantitative characterization of physical and chemical processes at the single-molecule scale.     

Spin-dependent transport through a magnetic carbon nanotube-molecule junction

The electronic structure and spin-dependent conductance of a magnetic junction consisting of two Fe-doped carbon nanotubes and a C60 molecule are investigated using a first-principles approach that combines the density functional theory with the nonequilibrium Greens function technique. The tunneling magnetoresistance ratio is found to be 11%. The density of states and transmission coefficient through the molecular junction are analyzed and compared to layered magnetic tunneling junctions. Our findings suggest new possibilities for experiments and for future technology.     

Dependence of single-molecule conductance on molecule junction symmetry

The symmetry of a molecule junction has been shown to play a significant role in determining the conductance of the molecule, but the details of how conductance changes with symmetry have heretofore been unknown. Herein, we investigate a naphthalenedithiol single-molecule system in which sulfur atoms from the molecule are anchored to two facing gold electrodes. In the studied system, the highest single-molecule conductance, for a molecule junction of 1,4-symmetry, is 110 times larger than the lowest single-molecule conductance, for a molecule junction of 2,7-symmetry. We demonstrate clearly that the measured dependence of molecule junction symmetry for single-molecule junctions agrees with theoretical predictions.     

Effect of Asymmetric Anchoring Groups on Electronic Transport in Hybrid Metal/Molecule/Graphene Single Molecule Junctions

A combined experimental and theoretical study on molecular junctions with asymmetry in both the electrode type and in the anchoring group type is presented. A scanning tunnelling microscope is used to create the “asymmetric” Au-S-(CH₂)n-COOH-graphene molecular junctions and determine their conductance. The measurements are combined with electron transport calculations based on density functional theory (DFT) to analyze the electrical conductance and its length attenuation factor from a series of junctions of different molecular length (n). These results show an unexpected trend with a rather high conductance and a smaller attenuation factor for the Au-S-(CH₂)_n-COOH-graphene configuration compared to the equivalent junction with the “symmetrical” COOH contacting using the HOOC-(CH₂)_n-COOH series. Owing to the effect of the graphene electrode, the attenuation factor is also smaller than the one obtained for Au/Au electrodes. These results are interpreted through the relative molecule/electrode couplings and molecular level alignments as determined with DFT calculations. In an asymmetric junction, the electrical current flows through the less resistive conductance channel, similarly to what is observed in the macroscopic regime.     

Structure‐Independent Conductance of Thiophene‐Based Single‐Stacking Junctions

The experimental investigation of intermolecular charge transport in π‐conjugated materials is challenging. Herein, we describe the investigation of charge transport through intermolecular and intramolecular paths in single‐molecule and single‐stacking thiophene junctions by the mechanically controllable break junction (MCBJ) technique. We found that the ability for intermolecular charge transport through different single‐stacking junctions was approximately independent of the molecular structure, which contrasts with the strong length dependence of conductance in single‐molecule junctions with the same building blocks, and the dominant charge‐transport path of molecules with two anchors transited from an intramolecular to an intermolecular path when the degree of conjugation increased. An increase in conjugation further led to higher binding probability owing to the variation in binding energies, as supported by DFT calculations.     

Controlling Single Molecule Conductance by a Locally Induced Chemical Reaction on Individual Thiophene Units

Among the prerequisites for the progress of single‐molecule‐based electronic devices are a better understanding of the electronic properties at the individual molecular level and the development of methods to tune the charge transport through molecular junctions. Scanning tunneling microscopy (STM) is an ideal tool not only for the characterization, but also for the manipulation of single atoms and molecules on surfaces. The conductance through a single molecule can be measured by contacting the molecule with atomic precision and forming a molecular bridge between the metallic STM tip electrode and the metallic surface electrode. The parameters affecting the conductance are mainly related to their electronic structure and to the coupling to the metallic electrodes. Here, the experimental and theoretical analyses are focused on single tetracenothiophene molecules and demonstrate that an in situ‐induced direct desulfurization reaction of the thiophene moiety strongly improves the molecular anchoring by forming covalent bonds between molecular carbon and copper surface atoms. This bond formation leads to an increase of the conductance by about 50 % compared to the initial state.     

Hydrogen-bond-induced quantum interference in single-molecule junctions of regioisomers

Solvents can play a significant role in tuning the electrical conductance of single-molecule junctions. In this respect, protic solvents offer the potential to form hydrogen bonds with molecular backbones and induce electrostatic gating via their dipole moments. Here we demonstrate that the effect of hydrogen bond formation on conductance depends on whether transport through the junction is controlled by destructive quantum interference (DQI) or constructive quantum interference (CQI). Furthermore, we show that a protic solvent can be used to switch the conductance of single-molecule junctions between the two forms of quantum interference. To explore this possibility, two regioisomers (BIT-Zwitterion and BIT-Neutral) were synthesized and their single-molecule conductances in aprotic and protic solvents were investigated using a scanning-tunneling-microscope-based break junction technique, combined with density functional theory and quantum transport theory. We find that the protic solvent twists the geometry of BIT-Zwitterion by introducing intermolecular hydrogen bonds between the solvent and target molecule. Moreover, it increases the energy gap between the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) of the molecule by imposing different electrostatic gating on the delocalized HOMO and localized LUMO, leading to a lower conductance compared to that in aprotic solvent. In contrast, the conductance of BIT-Neutral increases due to a transformation from DQI to CQI originating from a change from a planar to a folded conformation in the protic solvent. In addition, the stacking between the two folded moieties produces an extra through-space transport path, which further contributes to conductance. This study demonstrates that combinations of protic solvents and regioisomers present a versatile route to controlling quantum interference and therefore single-molecule conductance, by enabling control of hydrogen bond formation, electrostatic gating and through-space transport.

We demonstrate that the effect of solvent–molecule interaction through hydrogen bonding on junction conductance depends on whether transport through the junction is controlled by destructive or constructive quantum interference.     

Ruthenium Tris‐bipyridine Single‐Molecule Junctions with Multiple Joint Configurations

Single‐molecule junctions are of particular interest in molecular electronics. To realize molecular electronic devices, it is crucial that functional single‐molecule junctions are connected to each other by using joint units on the atomic scale. However, good joint units have not been reported because controlling the charge transport directions through the junctions is not trivial. Here, we report a joint unit that controls and changes the charge transport directions through the junctions, by using a ruthenium–tris‐bipyridine (RuBpy) complex. The RuBpy single‐molecule junction was fabricated with scanning tunnelling microscopy‐based break junction techniques. The RuBpy single‐molecule junction showed two distinct high and low conductance states. The two states were characterized by the conductance measurement, the correlation analysis, and the comparative experiment of bipyridine (Bpy), which is the ligand unit of RuBpy. We demonstrate that the Ru complex has multiple charge transport paths, where the charge is carried vertically and horizontally through the complex depending on the path.     

Al-C60-Al分子结电子输运特性的第一性原理计算

利用基于密度泛函理论的格林函数方法, 计算了Al-C60-Al分子结的电子输运特性. 考虑了C60分子在铝电极表面的原子结构弛豫, 计算结果表明共振传导是Al-C60-Al分子结电子输运的主要特征, 在费米能级附近的电导约为1.14G0 (G0=2e2/h). 投影态密度(PDOS)分析表明, Al-C60-Al分子结的电子输运主要通过C60分子的最低空分子轨道(LUMO)和次低空分子轨道(LUMO+1)进行. 讨论了C60分子和铝电极之间距离的变化对其电子输运特性的影响.     

Not So Innocent After All: Interfacial Chemistry Determines Charge-Transport Efficiency in Single-Molecule Junctions

Most studies in molecular electronics focus on altering the molecular wire backbone to tune the electrical properties of the whole junction. However, it is often overlooked that the chemical structure of the groups anchoring the molecule to the metallic electrodes influences the electronic structure of the whole system and, therefore, its conductance. We synthesised electron-accepting dithienophosphole oxide derivatives and fabricated their single-molecule junctions. We found that the anchor group has a dramatic effect on charge-transport efficiency: in our case, electron-deficient 4-pyridyl contacts suppress conductance, while electron-rich 4-thioanisole termini promote efficient transport. Our calculations show that this is due to minute changes in charge distribution, probed at the electrode interface. Our findings provide a framework for efficient molecular junction design, especially valuable for compounds with strong electron withdrawing/donating backbones.     

基于电化学方法研究以铜和银为电极的对苯二甲酸单分子结电导

利用基于电化学跳跃接触的扫描隧道显微镜裂结法(ECSTM-BJ), 通过现场形成金属电极, 对以Cu和Ag为电极的对苯二甲酸单分子结电导进行了测量. 研究结果表明: 利用该方法对所有数据直接线性统计即可得到很好结果; 两种电极下都存在两套高和低电导值, 其中以Cu为电极的单分子结电导高低值分别为11.5和4.0 nS, 而以Ag为电极的单分子结电导分别为10.3和3.8 nS, 高值都约为低值的3倍, 且以Cu为电极的单分子结电导要略大于以Ag为电极的电导, 可归结于电极和分子的耦合不同造成的. 与同样条件下测量得到的烷基链羧酸单分子结电导只存在一套值相比,对苯二甲酸表现出两套电导值, 反应了分子内主链对分子结电导的影响.     

In situ gap-mode Raman spectroscopy on single-crystal Au(100) electrodes: tuning the torsion angle of 4,4'-biphenyldithiols by an electrochemical gate field

In situ gap-mode Raman spectra were acquired in an electrochemical environment on a single-crystal gold electrode employing a Au(100)|4,4'-biphenyldithiol (BPDT)|Au-NP(55 nm) sandwich assembly. This geometry enabled an investigation of the influence of an applied electrochemical gate field on the conformational changes in nanojunctions, such as the torsion angle (φ) of molecules. A linear correlation between the intensity ratio I(C═C)/I(C(ring)-S) and cos(2) φ in 4,4'-BPDT-type molecular junctions was established and subsequently utilized to estimate the potential dependence of the torsion angle of the "flexible" molecule M1 at different potentials. The latter decreases as the potential (charge) becomes more negative, resulting in better π-π coupling, which correlates with enhanced junction conductance. The demonstrated spectroelectrochemical strategy and the direct correlation of the spectroscopic results with (single) molecular conductance studies may guide the selection and elucidation of functional molecules for potential applications in novel nanodevices.