基于离子液体电解液的有机电化学反应

室温离子液体(RTILs) 作为一类在室温时呈液态且具有良好导电性的新型绿色溶剂, 在有机电化学反应体系中的应用前景广阔。本文介绍了近年报道过的新型离子液体及离子液体电解液的特性,阐述了基于离子液体电解液的电化学实验方法,重点综述了离子液体中的各种有机电化学反应,包括电化学还原反应、CO₂在离子液体中的电化学固定、电化学氧化反应、烯烃的环氧化、选择性氟化反应、偶联反应、功能化有机硅氧烷的合成、电化学氟化脱硫反应、电化学聚合反应等,并展望了发展趋势。     

室温离子液体的研究进展

对室温离子液体的制备及性能的研究进展进行了评述。室温离子液体的阳离子多为有机含氮杂环阳离子，阴离子通常为体积较大的无机阴离子。室温离子液体用作溶剂，具有液态温度范围宽、溶解能力强、蒸气压低、粘度高、电化学窗口宽等特点，在有机合成、电化学、无机物溶液化学方面具有广阔的应用前景。     

离子液体在分离领域的研究进展

室温离子液体,又称离子液体,是一种在室温及接近室温的环境中完全以离子状态存在的液态物质.由于其具有不可燃、蒸汽压极低、黏度大、导电性和溶解能力好、高温稳定等特点,已被广泛应用于有机合成、催化、电化学、分析化学等领域.本文侧重介绍离子液体在样品预处理、毛细管电泳、高效液相色谱、气相色谱、质谱等分离领域的最新研究进展,并对其发展方向进行了展望.     

离子液体的量化计算及分子动力学模拟研究进展

离子液体是由有机阳离子和无机/有机阴离子构成的盐类,一般在室温或接近于室温下呈液态,因此常被称为室温离子液体(RTIL).依据不同的划分标准,离子液体有多种分类方式:根据年代的不同可将离子液体分为第一代、第二代及第三代离子液体,例如:烷基咪唑和烷基吡啶的金属卤化物盐等[1];根据阳离子的不同可将离子液体分为季鏻     

离子液体应用于电合成导电聚合物*

自20世纪70年代导电聚合物发现以来,聚吡咯、聚苯胺、聚噻吩、聚（3,4-乙撑二氧噻吩）、聚对苯及其衍生物等,以其特殊的电子、电化学、光学性质以及巨大应用潜力受到广泛关注。离子液体是一类在室温或接近室温时呈液态的离子化合物,作为一类环境友好的新型绿色溶剂,具有很多独特的物理化学性质。本文综述了离子液体作为反应介质、支持电解质、测试介质以及离子液体参与形成的聚集体,在导电聚合物的电化学合成以及电化学性质测试中的研究进展,并展望了发展趋势。     

离子液体及其在分离分析中的应用进展

室温离子液体是一类熔点在室温附近的熔融盐，以其熔点低、蒸汽压小、电化学窗口宽、酸性可调节以及良好的溶解性等特点在电化学、有机合成、催化、分离等领域应用广泛。综述了离子液体在分离分析上的应用进展。参考文献48篇。     

离子液体在毛细管电泳中的应用

离子液体是在室温下或接近于室温下呈液态的物质.基于离子液体独特的物理化学性质,在毛细管电泳中应用最多.综述了近年来离子液体在毛细管电泳中应用的研究进展(引用文献43篇).     

室温离子液体在聚合反应中的应用

室温离子液体作为一种环境友好的“绿色溶剂”,具有很多独特的物理化学性能,可以应用于自由基聚合、阳离子聚合、配位聚合、电化学聚合等反应体系。本文介绍了室温离子液体在上述反应中的应用。     

离子液体媒介电致化学发光及其分析应用

离子液(Room temperature ionic liquid,RTIL)作为一种新兴的"绿色"溶剂,是完全由有机阳离子和无机阴离子组成,在室温下或室温附近呈液态的盐类化合物.离子液体具有许多独特的物理化学性质,如:蒸气压低、热稳定性和化学稳定性高、电化学窗口宽、粘度较高、导电率高(高离子强度)、可变温度范围宽等,离子液体非常适用于电化学研究.     

微波法合成离子液体1-乙基-3-甲基咪唑四氟硼酸盐的研究

离子液体(ionic liquids)是在室温下液态的一种熔融盐,又称为室温离子液体,一般由有机阳离子和无机阴离子或者有机阴离子构成,可以通过调节阴阳离子的种类来改变离子液体的性能,因此敢称为一种"可以设计的溶剂".     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.