Pyridine based zirconium(IV) and tin(IV) phosphates as new and novel intercalated ion exchangers

Pyridine based zirconium(IV) phosphate (PyZrP) and tin(IV) phosphate (PySnP) have been synthesized as new and novel intercalated ion exchangers. These materials have been characterized using X-ray, IR spectra, TG, DTG and DTA studies in addition to their ion exchange capacity, elution, pH titration, concentration and distribution behaviour. The distribution studies towards several metal ions in different media/concentrations have suggested that PyZrP and PySnP are selective for Hg(II) and Pb(II), respectively. As a consequence some binary separations of metal ions involving Hg(II) and Pb(II) ions have been performed on a column of these materials, demonstrating their analytical and environmental potential.     

Complexation ion-exchange chromatography of some metal ions on papers impregnated with Ti(IV)-based inorganic ion exchangers

The chromatographic behavior of 40 metal ions is studied on titanium (IV) arsenate, titanium (IV) phosphate-, titanium (IV) molybdate-, titanium(IV) tungstate-, and titanium(IV) selenite-impregnated papers in 0.1M oxalic, citric, and tartaric acid as mobile phases. Similar studies are carried out on Whatman No. 1 papers for comparison. The ion-exchange capacity of these papers is determined, and their selectivity for different cations is discussed. The mechanism of migration is explained in terms of ion-exchange, precipitation, and adsorption. The prediction of elution sequence from RF values is also checked. The average Ri is found to be almost linearly dependent on the charge of the metal ions. The effect of the pKa of complexing acids on average RF values of 3d series metal ions is explained. A number of binary and ternary separations are achieved.     

Sorption of radionuclides on thorium tungstophosphate: A new inorganic ion-exchanger

Summary Samples of a new inorganic ion-exchanger thorium tungstophosphate have been prepared under various conditions. The ion exchange capacity, IR, XRD, thermogravimetry and sorption of the radionuclides have been studied. Separation of Sr-Nd, Sr-Ce, Cr-Mo and Cs-Nd have been developed on columns of this ion-exchanger.     

Comparison of nonporous silica-based ion exchangers and monolithic ion exchangers in separations of inorganic anions

Low capacity anion exchangers for IC have been prepared by modification of nonporous uniformed silica MICRA microbeads and by modification of the organic polymeric monolithic matrixes prepared in situ in quarz capillary. Due to the small particle size (1.5 microm) high-performance adsorbents were prepared allowing to obtain up to 190,000 tp/m. However, the column possesses a very high back-pressure and can be used in a short length up to 50 mm only to meet the requirements of conventional chromatographic equipment. An analysis of a test mixture of seven anions was completed within 3 min with a back column pressure of about 350 bar (HETP of about 5.5 microm, where HETP is the height equivalent to the theoretical plate). Monolithic capillary columns provide lower efficiency per column unit length than MICRA columns; however, they can be used at a longer length because of their low flow resistance. Monolithic column of ca. 40 cm length has workable pressure below 10 bar and allows separation of a five anions test mixture within less than 10 min. A better efficiency of monolithic column (HETP approximately 75 microm) can be achieved at reduced flow rates when the analysis time is not a critical parameter.     

Synthesis, characterization and analytical application of a new inorganic cation exchanger—Titanium(IV) molybdophosphate

A novel polyoxometalate-cation exchanger, titanium(IV) molybdophosphate (TMP) has been synthesized under varying conditions. The material was characterized by X-ray diffraction, infrared spectroscopy, inductively coupled plasma and thermogravimetry techniques. Its stability was investigated in water, dilute acids, alkaline solutions, and high temperature up to 750 °C. Ion-exchange capacity and distribution coefficients (K_d) for twenty-nine radionuclides and metal ions have been determined. It was found that the TMP has high affinity for Cs⁺, Sr²⁺, UO₂²⁺, Ba²⁺, Pb²⁺, Tl⁺, Zn²⁺, Rb²⁺ and Zr⁴⁺ ions. The results of binary separation of metal ions showed that TMP can be potentially useful for analytical applications.     

New inorganic (an)ion exchangers based on Mg-Al hydrous oxides: (alkoxide-free) sol-gel synthesis and characterisation

New inorganic ion exchangers based on double Mg-Al hydrous oxides were generated via the new non-traditional sol-gel synthesis method which avoids using metal alkoxides as raw materials. Surface chemical and adsorptive properties of the final products were controlled by several ways of hydrogels and xerogels treatments which produced the materials of the layered structure, mixed hydrous oxides or amorphous adsorbents. The final adsorptive materials obtained via thermal treatment of xerogels were the layered mesoporous materials with carbonate in the interlayer space, surface abundance with hydroxylic groups and maximum adsorptive capacity to arsenate. Higher affinity of Mg-Al hydrous oxides towards H(2)AsO(4)(-) is confirmed by steep adsorption isotherms having plateau (removal capacity) at 220 mg[As]g(dw)(-1) for the best sample at pH=7, fast adsorption kinetics and little pH effect. Adsorption of arsenite, fluoride, bromate, bromide, selenate, borate by Mg-Al hydrous oxides was few times high either competitive (depending on the anion) as compare with the conventional inorganic ion exchange adsorbents.     

Comparative study of titanium(IV)-based exchangers in aqueous and mixed solvent systems

The antimonate, arsenate, tungstate, molybdate and selenite of titanium have been synthesized. Their composition and chemical and thermal stability have been determined. Effects of pH and temperature on ion-exchange capacity have been studied. Titanium antimonate was found to be the most stable. The utility of these ion-exchangers for analytical separations was examined by determining the distribution coefficients for 26 metal ions in some aqueous, non-aqueous and mixed solvent systems. Quantitative separations of HgCd, PbCu and PbZn have been achieved on titanium tungstate columns, and LaBa mixtures have been separated on a titanium arsenate column.     

Synthesis and ion exchange behaviour of polyaniline Sn(IV) arsenophosphate: a polymeric inorganic ion exchanger

Incorporation of a polymer material into an inorganic ion exchanger provides a class of hybrid ion exchangers with a good ion exchange capacity, high stability, reproducibility and selectivity for heavy metals. Such a type of ion exchanger ‘polyaniline Sn(IV) arsenophosphate’ has been synthesized by mixing polyaniline into inorganic material. This material is characterized using X-ray, IR, TGA studies in addition to ion exchange capacity, pH-titration, elution and distribution behaviour. On the basis of distribution studies, the material has been found to be highly selective for Pb(II). Kinetic study of exchange for the metal ions has been performed and some physical parameters such as self diffusion coefficient D₀, energy E_a and entropy ΔS* of activation have been determined.     

Some ion exchange properties of amorphous titanium (IV) phosphate

An amorphous titanium (IV) phosphate exchanger has been synthesised and characterized through elemental analysis, infrared, and thermogravimetric techniques. Divalent cations Mn, Co, Ni, Cu, Zn, Cd, Hg and Pb in bidistilled water have been exchanged with the proton of the exchanger matrix using a batch method. From these results the thermodynamic selectivity constants and distribution coefficients were calculated, whose values indicate a high selectivity for Pb and Hg. Both cations were successfully separated from a mixture containing all cations studied through column separation experiments.     

Pectin based cerium (IV) and thorium (IV) phosphates as novel hybrid fibrous ion exchangers synthesis,characterization and thermal behaviour

Summary Pectin based cerium (IV) and thorium (IV) phosphates have been synthesized as new phases of hybrid fibrous ion exchangers. Both materials were characterized using X-ray diffraction, infrared (IR) spectra, thermogravimetric analysis (TG), differntial thermogravimetry (DTG), differntial thermal analysis (DTA) and scanning electron microscopy (SEM), as well as the determination of their ion exchange capacity, elution and pH titration. The X-ray study reveals the amorphous nature of the materials, while SEM studies confirm the fibrous nature of the materials. The thermal studies of these materials indicate that both of them are highly stable on heating as they retain about 97% of their ion-exchange capacity (i.e.c.) on heating up to 100°C and about 81% on heating up to 200°C.     

Mixed ligand titanium(IV) complexes. Chlorobis(dithiocarbamato)bis(methylsalicylato)titanium(IV) andbis(dithiocarbamato)bis(methylsalicylato)titanium(IV)

Summary Dichlorobis(methylsalicylato)titanium(IV) reacts with potassium or amine salts of dialkyl or diaryl dithiocarbamates in 11 and 12 molar ratios in anhydrous benzene (room temperature) or in boiling CH₂Cl₂ to yield mixed ligand complexes: (AcOC₆H₄O)₂ Ti(S₂CNR₂)Cl (1) and (AcOC₆H₄O)₂ Ti(S₂CNR₂)₂ (2), R=Et, n-Pr, n-Bu, cyclo-C₄H₈ and cyclo-C₅H₁₀. These compounds are moisture sensitive and highly soluble in polar solvents. Molecular weight measurement in conjunction with i.r.,¹H and¹³C n.m.r. spectral studies suggest coordination number 7 and 8 around titanium(IV) in (1) and (2) respectively.     

On the hydrolysis of the titanium(IV) ion in chloride media

Determinations of the [Ti(IV)]/[Ti(III) ratio in solutions of titanium(IV) chloride equilibrated with H₂(g), at 25°C in 3 M (Na)Cl ionic medium, have indicated the predominance of the Ti(OH)₂²⁺ species in the concentration ranges 0.5 ? [H⁺] ? 2 M and 1.5 x 10^?3 ? [Ti(IV)] ? 0.05 M. From the equilibrium data the reduction potential has been evaluated Ti(OH)₂²⁺ + 2 H⁺ + e ? Ti³⁺ + 2H₂O, E_oH = (7.7 ± 0.6) x 10^?3 V. The acidification reactions of Ti(OH)₂²⁺ were also studied in 12 M(Li)Cl medium at 25°C by measuring the redox potential of the Ti(IV)/Ti(III) couple as a function of [H⁺]. The potentiometric data in the acidity range 0.3 ? [H⁺] ? 12 M have been explained by assuming Ti⁴⁺ + e ? Ti³⁺, E_o = 0.202 ± 0.002 V Ti⁴⁺ + H₂O ? TiOH³⁺ + H⁺, log K_a1 = 0.3 ± 0.01 Ti⁴⁺ + 2H₂O ? Ti(OH)₂²⁺ + 2H⁺, log K_a1K_a2 = 1.38 ± 0.05.     

Hydrated titanium(IV) oxide as a granular inorganic sorbent for removal of radiostrontium

The sorption of radiostrontium on hydrated titanium(IV) oxide was studied in batch equilibration experiments. The strontium uptake capacity was determined. Batch distribution coefficients were measured as function of solution pH as well as strontium and sodium concentration. The effect of electron beam irradiation on strontium sorption was also examined. The results are of significance in connection with the removal of radiostrontium traces from alkaline sodium salt-loaded wastes of reprocessing plant origin.     

Schiff base derivatives of titanium(IV) and zirconium(IV)

The reactions of a few bifunctional and tridentate Schiff bases with titanium-(IV) and zirconium(IV) isopropoxides in equimolar and bimolar ratios are described. The resulting compounds have been obtained in almost quantitative yields and are of the general formulae M(SB)_x(OPrⁱ)_4?2X (where M = Ti or Zr; SB- = anion of the Schiff base SBH₂ and x = 1 or 2). Their molecular weights have been determined ebullioscopically and IR spectra recorded.     

Synthesis and molecular structures of some new titanium(IV) aryloxides.

The coordination chemistry of model phenolic ligands (pyrocatechol, salicylic acid, and 2,2'-biphenol) that are able to form respectively five-, six-, or seven-membered rings with titanium(IV) alkoxides is investigated. With pyrocatechol, a polynuclear complex containing 10 Ti atoms was characterized with a not very common doubly bridging mu3-(O,O,O',O') coordination mode. With salicylic acid, a monomeric tris(chelate) complex was obtained. With 2,2'-biphenol, a polynuclear complex containing six Ti atoms was obtained showing both mu2-(O,O') and mu2-(O,O,O') coordination modes for the ligands. Intermolecular interactions in the solid state for these three new compounds are also quantitatively discussed using the partial charge model.     

Titanium(IV) and zirconium(IV) derivatives of tetradentate schiff bases

Summary Titanium and zirconium isopropoxides react with the tetradentate Schiff bases, I)is-salicylaldehyde-o-phenylenediimine (SBH₂ ) and bis-salicylaldehyde-p-phenylencdiimine (SBH₂) in anhydrous benzene in 1: 1 and 1 :2 molar ratios to give almost quantitative yields of M(OPr-i)₂ (SB) and M(OPr-i)2(SB)(SBH), where M = Ti or Zr and [SB]² is the anion of the corresponding Schiff base, SBH₂. The i.r. spectra of the completes have been recorded and tentative assignments for C=N and C-O stretching frequencies made.