Properties of dendronized acrylic polymers: Effect of composition and structure of peripheral groups

Two series of new acrylic polymers carrying L-aspartic acid-based dendrons in side chains with terminal hexyloxycarbonyl groups that are both directly and indirectly, via a rigid spacer, attached to polymer chains have been synthesized by the free-radical polymerization of monomers. The polymerization ability of the monomers has been studied. The properties of new polymers are compared with the properties of polymer analogs containing terminal methoxycarbonyl groups of dendrons. Upon incorporation of the rigid spacer, the shielding of reactive centers decreases and the polymerizability of the monomers increases. The replacement of terminal methyl groups in dendrons with hexyl groups in spacer-free polymers leads to a reduction in the degree of polymerization, while in the case of polymers containing spacers, high-molecular-mass products arise. This phenomenon is facilitated by the amphiphilic nature of the polymers and the additional enhancement in the rigidity of chains. A polymer carrying a third-generation dendron has been synthesized only for the latter series.     

Synthesis and polymerization of a new nitrogen‐containing bis‐ortho‐diynylarene monomer

This study focuses on the preparation, characterization, and optical properties of new bis(3,4‐diphenylethynylphenyl)phenylamine. This is the first nitrogen‐containing bis‐ortho‐diynylarene (BODA) monomer having a nitrogen atom as the spacer group. BODA monomers are usually prepared from common bisphenols, thereby providing great synthetic versatility and the opportunity to develop a wide array of novel polyarylene thermosets by varying the aromatic spacer group. The new bis(3,4‐bisphenylethynylphenyl)phenylamine was synthesized in five steps. This compound emits an intense blue color (λ = 438 nm) upon irradiation by UV light and may be suitable for use as an emitting layer in electroluminescent devices. Bis‐(3,4‐bisphenylethynylphenyl)phenylamine and its polymer have photoluminescence quantum yields 34 and 38%, respectively, and long excited‐state lifetimes of 3.2 and 3.6 ns, respectively. The structure of the monomer and its polymer were characterized using spectroscopic techniques including Ultraviolet–visible Spectrophotometer, Photoluminescence Spectrophotometer, Fourier Transform infrared spectroscopy, and Gel Permeation Chromatography. The polymerizations were studied by Differential Scanning Calorimeter. The amount of weight loss and the thermostability of the nitrogen‐containing polymer were determined from thermogravimetric analysis. The electrical conductivity of neat HCl‐doped BODA‐derived polymer film was measured according to the standard four‐point probe technique. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6988–6996, 2006     

Hyperbranched polyurethanes with varying spacer segments between the branching points

Hyperbranched polyurethanes, with varying oligoethyleneoxy spacer segments between the branching points, have been synthesized by a one-pot approach starting from the appropriately designed carbonyl azide that incorporates the different spacer segments. The structures of monomers and polymers were confirmed by IR and ¹H-NMR spectroscopy. The solution viscosity of the polymers suggested that they were of reasonably high molecular weight. Reversal of terminal functional groups was achieved by preparing the appropriate monohydroxy dicarbonyl azide monomer. The large number of terminal isocyanate groups at the chain ends of such hyperbranched macromolecules caused them to crosslink prior to its isolation. However, carrying out the polymerization in the presence of 1 equiv of a capping agent, such as an alcohol, resulted in soluble polymers with carbamate chain ends. Using a biphenyl-containing alcohol as a capping agent, we have also prepared novel hyperbranched polyurethanes with pendant mesogenic segments. These mesogen-containing polyurethanes, however, did not exhibit liquid crystallinity probably due to the wholly aromatic rigid polymer backbone. © 1996 John Wiley & Sons, Inc.     

Unpaired-electron localization and delocalization in macromolecules with a system of conjugated C=C bonds

The radical polymerization of acetylene monomers has been studied in a wide temperature range (77–340 K) using EPR spectroscopy, calorimetry, chromatography, and gravimetry It has been found that the growing macroradical is active, and its unpaired electron is localized at a terminal fragment of the molecule. However, it lost its activity even at small chain lengths (less than ten monomer units) because of delocalization of the unpaired electron along the system of conjugated double bonds.     

Effect of spacer length on the liquid crystalline property of azobenzene-containing ABA-type triblock copolymers via ATRP

The effect of flexible spacer length on the liquid crystalline property of ABA-type triblock copolymers containing azobenzene groups was investigated.For the study,the monomers,n-[4-(4-ethoxyphenylazo)phenoxy]alkyl methacrylates with varying methylene groups(n=0,2,6)were used to synthesize a series of azobenzene-containing amphiphilic triblock copolymers PAnC-PEG-PAnC by atom transfer radical polymerization(ATRP).Differential scanning calorimetry(DSC),polarizing optical microscopy(POM),and one-dimensional X-ray diffraction(1D WAXD)have shown that the glass transition temperatures of these copolymers decreased with increasing n,PAOC-PEG-PAOC has no mesophase,while both PA2C-PEG-PA2C and PA6C-PEG- PA6C have a nematic mesophase.These differences derive from the length of spacer groups between the polymer backbone and side-chain LC monomers.     

Study on new chiral liquid crystalline monomers and polymers containing menthyl groups

A series of new chiral monomers (M1–M4) and the corresponding siloxane polymers (P1–P4) containing menthyl groups were synthesised to establish the relationship between their structure and liquid crystalline properties. The effect of the mesogenic core rigidity and the spacer length on the phase behaviour of the monomers and polymers obtained in this study was discussed. The selective reflection of light for the chiral monomers was studied with UV-Vis spectrometer. Polarising optical microscopy, differential scanning calorimetry, X-ray diffraction and thermogravimetric analysis were used to characterise the phase behaviour and thermal stabilities. It was found that these chiral monomers and polymers were beneficial for the formation of the mesophases when a flexible spacer was inserted between the mesogenic core and terminal menthyl groups. M1–M3 showed enantiotropic chiral smectic C phase and cholesteric phase, and monotropic cubic blue phase on cooling cycle. M4 only showed cholesteric phase. P1–P4 showed a smectic A phase. With increasing the mesogenic core rigidity or decreasing the spacer length, the corresponding melting temperatures, glass transition temperatures and isotropic temperatures all increased.     

Electron paramagnetic resonance studies on oxidative polymerization mechanism of furan derivatives

The oxidative polymerization of furan, 3-methylfuran and 2,2′,5′,2″-terfuran, induced by iodine in organic solvents having different donicity, was investigated by time-resolved electron paramagnetic resonance (EPR) spectroscopy. The reaction was monitored starting from the onset of the process and radical species arising from the monomers in early stages of the polymerization reaction were detected. The comparison between experimental and theoretical hyperfine coupling constants, obtained by simulated EPR spectra and theoretical ab initio calculations, respectively, allowed one to structurally characterize the above radical species, thus enabling mechanistic conclusions about oxidative coupling. Moreover, the analysis of the time evolution of EPR spectrum during the oxidative polymerization process was used for evaluating the relative amount of localized and mobile radical species along the polymer backbone, thus getting preliminary information about conjugation extent and electroconducting properties of the final material. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1901–1910, 1998     

PHOTOINITIATED CATIONIC POLYMERIZATION OF EPOXY MONOMERS IN THE PRESENCE OF POLY(3,4-EPOXY-1-BUTENE)

ABSTRACT

Hydroxyl-terminated poly(3,4-epoxy-1-butene) (polyEPB) is an interesting and highly useful agent for the acceleration of the photoinitiated cationic ring-opening polymerization of epoxide monomers. Kinetic investigations using real-time infrared spectroscopy have shown that the observed acceleration of the polymerization is due to two independent mechanisms. Crosslinking polymerization of epoxide monomers is accelerated due to an activated monomer mechanism that results in facile chain transfer due to interaction of the terminal hydroxyl groups of polyEPB with the growing oxonium ion chain ends. A second mechanism involving participation of polyEPB in a free radical chain induced decomposition of the onium salt photoinitiator is mainly responsible for the observed acceleration in the rate of polymerization. A large number of polymer-bound carbocationic species are generated by this mechanism that are capable of initiating polymerization of the epoxide monomer.     

Effect of spacer chemistry on the formation and properties of linear reversible polymers

A series of four pairs of bismaleimide and bisfuran monomers were combined to make thermally reversible linear polymers. The monomers were prepared using diamines having different spacer chemistries, n‐octyl, cyclohexyl, phenyl, and ethylenedioxy, such that a relatively constant spacer dimension among the four monomers was achieved. Heating of the bismaleimide/bisfuran couples resulted in low‐viscosity, easily processable liquids. Subsequent cooling to room temperature resulted in the formation of hard films, with the rate of hardening varying significantly within the series of compounds. The rate and degree of polymerization were determined using ¹H NMR spectroscopy and were both found to be dependent on the chemistry of the spacer group, as was the film rheology, which was measured using nanoindentation. Adhesion of the polymers was quantified by measurement of their tensile adhesive strength, and this was also found to be spacer dependent. Polymerization reversibility was verified using ¹H NMR spectroscopy. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5056–5066     

Cinnamate ester containing liquid crystalline side chain polymers

The synthesis of methacrylate esters of 4-cyanophenyl-(4-(ω-hydroxyalkyloxy)) cinnamates, with spacer lengths of 2 and 6 methylene units and the synthesis of the corresponding acrylate ester with a spacer of 2 methylene units are described. The methacrylate monomers were polymerized by free radical polymerization, both as homopolymers and as copolymers with the analogous benzoate monomer of spacer length 6. The acrylate ester could not be polymerized successfully under the same reaction conditions. Polymers were characterized by NMR spectroscopy, gel permeation chromatography, differential scanning calorimetry, and thermo-optic observations. Of the monomers prepared, only the cinnamate with a hexamethylene spacer shows a mesophase, seen on supercooling of the melt. All of the polymers prepared were liquid crystalline, with smectic behavior predominating in the polymethacrylates with the longer spacer group. A narrow nematic region is seen just below the clearing temperature with a range of 3–9°C, nematic character is increased in the copolymer series with the degree of incorporation of the cinnamate monomer with the spacer group of length 2.     

Liquid-crystalline monomers, dimers and side group polymers containing phenylpyrimidine mesogens

Phenylpyrimidine derivatives were used to synthesize monomers, dimers and side group polymers. Only a few monomers and dimers show liquid-crystalline behaviour whereas almost all of the polysiloxanes, polyacrylates and polymetha-crylates prepared possess enantiotropic Hquid-crystalline phases. The structure of the main chain and of the mesogenic unit as well as the length of the spacer and of the terminal groups were modified. The relation between structure and phase behaviour is discussed.     

Solid-State polymerization of the binary mixture of methacrylate and liquid-crystalline compound by electron beam

Solid-state polymerization of a binary mixture of nonliquid-crystalline monomer and liquidcrystalline compound was carried out using electron beam. The monomers were benzoic acid containing 4-[ω-(meth)acryloyloxyalkyloxy] benzoic acids, in which the alkylene spacer was ethylene, hexamethylene, or undecamethylene. The conversion yield of monomer to polymer to a large extent increased with increasing content of a liquid-crystalline compound with a terminal carboxylic group, such as 4-n-alkyloxybenzoic acid, while the addition of a liquid-crystalline compound without terminal carboxylic group did not affect polymerization of the monomer. Phase diagrams of the mixture of monomer and liquid-crystalline compound were examined using cross-polarizing microscopy and differential scanning calorimetry (DSC). All mixtures of monomer and 4-n-alkyloxybenzoic acid or liquid-crystalline compound without terminal carboxylic group showed liquid-crystallinity in a broad composition range. It was concluded that liquid-crystalline compounds with terminal carboxylic acid may form hydrogen bondings with methacrylate or acrylate monomer having terminal carboxylic acid which enhance polymerizability of the mixture. The stereoregularity of polymers determined by NMR depended on increasing irradiation dose and temperature rather than the content of the added liquid-crystalline 4-n-decanoxybenzoic acid.     

Photocrosslinking of functionalized rubber. III. Polymerization of multifunctional monomers in epoxidized liquid natural rubber

Different types of tridimensional polymer networks have been synthesized by photoinitiated polymerization of difunctional monomers blended to an epoxidized natural rubber. The crosslinking reaction was followed by infrared spectroscopy and shown to proceed extensively within less than 1 s for the cycloepoxy, vinyl ether, and acrylate monomers used. By acting as a plasticizer, the monomer was found to markedly accelerate the ring-opening polymerization of the epoxy groups of the rubber chain. Cationic polymerization continues to proceed effectively after the UV-exposure, until total consumption of the epoxy groups. The nature of the comonomer has a strong influence on the properties of the crosslinked rubber. Low-modulus polymers were obtained with divinyl ether monomers, while hard but still flexible films were obtained with dicycloepoxy and diacrylate monomers. © 1996 John Wiley & Sons, Inc.     

可溶性聚酰亚胺液晶取向膜的制备与性能

液晶取向膜是液晶显示器中的关键材料,为了制得性能优良的液晶取向膜,我们通过铃木偶联反应制备了3种含有不同末端基团的3,5-二氨基联苯,将制得的3种二胺单体分别与环丁烷四甲酸二酐聚合得到3种新型的聚酰亚胺。 利用核磁氢谱对单体和聚合物的结构进行了表征,测试了聚合物的溶解性、热稳定性以及用作液晶取向膜的性能。 结果表明,所得的聚酰亚胺具有良好的溶解性和热稳定性,经过机械摩擦后,末端带有甲氧基的聚酰亚胺能使液晶分子平行于摩擦方向取向,末端带有苯氧羰基和联苯氧羰基的聚酰亚胺能使液晶分子垂直于摩擦方向取向。 此类可溶性的聚酰亚胺液晶取向膜将简化制备工艺并在柔性显示器件中具有较大的应用价值。     

Controlled-release of drugs from cross-linked polymers containing cubane as a crosslinking agent

Two anti-inflammatory drugs, indomethacin and aspirin together with cubane-1, 4-dicarboxylic acid (CDA) were covalently linked with 2-hydroxyethyl methacrylate (HEMA). The drug-linked HEMA (indomethacin-linked HEMA) is abbreviated as HI, aspirin-linked HEMA as HA and cubane-1, 4-dicarboxylic acid (CDA) linked to two HEMA group is the cross-linking agent (CA). A difunctional spacer group was introduced between the drugs and acrylic moiety of the monomer through a hydrolyzable ester linkage. Free radical cross-linking polymerization of the monomers with drug effect was carried out in dioxane solution at various CA ratios, using AIBN as initiator in the temperature range 60-70°C. The compositions of the cross-linked three-dimensional polymers were determined by FT-IR spectroscopy. The glass transition temperature (Tg) of the network polymers was determined calorimetrically. The hydrolysis of drug-polymer conjugates was carried out in cellophane membrane dialysis bags containing an aqueous buffer solution (pH 8 and pH 1) at 37°C. Detection of the hydrolysis product by UV spectroscopy shows that the drugs were released by hydrolysis of the ester bond located between the drug and spacer group.     

Surface modification of titanium by using plasma‐induced graft‐polymerization

Plasma‐induced graft‐polymerization (PIGP) method was utilized in this study to improve corrosion behavior and biocompatibility of titanium (Ti) surface. Bioactive molecule polyacrylamide (PAM) was immobilized onto Ti surface by introducing silanederivatized spacer arms as an intermediary for the covalent linkage. Ti was firstly activated by O₂ plasma, and oxygen‐containing groups were introduced on its surface consequently. The intermediary mercapto silane spacer molecules were then covalently linked to the oxidated surface, followed by the covalent binding of PAM and the sulfhydryl‐terminal groups via PIGP. Surface analyses following modification process included water contact angles (CA), SEM, attenuated total reflection‐Fourier transform infrared spectroscopy (ATR‐FTIR), XPS and atomic force microscope (AFM). The results revealed the effectiveness of this method on immobilizing PAM to Ti surface, and the hydrophilicity of modified surface improved remarkably. In addition, potentiodynamic polarization and cellular proliferation tests were implemented to validate the enhanced corrosion‐resistance and biocompatibility of modified Ti surface, respectively. Copyright © 2011 John Wiley & Sons, Ltd.     

RAFT‐mediated synthesis of poly[(oligoethylene glycol) methyl ether acrylate] brushes for biological functions

The synthesis of poly[(oligoethylene glycol) methyl ether acrylate] [poly(OEGA)] brushes was achieved via reversible addition‐fragmentation chain transfer (RAFT) polymerization and used to selectively immobilize streptavidin proteins. Initially, gold surfaces were modified with a trithiocarbonate‐based RAFT chain transfer agent (CTA) by using an ester reaction involving a gold substrate modified with 11‐mercapto‐1‐undecanol and bis(2‐butyric acid)trithiocarbonate. poly(OEGA) brushes were then prepared via RAFT‐mediated polymerization from the surface‐immobilized CTA. The immobilization of CTA on the gold surface and the subsequent polymer formation were followed by ellipsometry, X‐ray photoelectron spectroscopy, grazing angle‐Fourier transform infrared spectroscopy, atomic force microscopy, and water contact‐angle measurements. RAFT‐mediated polymerization method gave CTA groups to grafted poly(OEGA) termini, which can be converted to various biofunctional groups. The terminal carboxylic acid groups of poly(OEGA) chains were functionalized with amine‐functionalized biotin units to provide selective attachment points for streptavidin proteins. Fluorescence microscopy measurements confirmed the successful immobilization of streptavidin molecules on the polymer brushes. It is demonstrated that this fabrication method may be successfully applied for specific protein recognition and immobilization. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and thermal behavior of side-chain liquid crystalline polymethacrylates containing tolane-based mesogenic side groups

The synthesis and characterization of nine polymethacrylates containing 4-alkoxy-4′-trifluoromethyltolane, 4-alkoxy-4′-cyanotolane, and 4-alkoxy-4′-nitrotolane side groups were described in this study. The phase behavior of the prepared monomers and polymers was characterized by differential scanning calorimetry, optical polarizing microscopy, and x-ray diffraction. All of the obtained monomers exhibit no mesophase, while most of the synthesized polymers reveal enantiotropic mesomorphism. The polymethacrylate containing 4-propanyloxy-4′-nitrotolane side groups was the only one which shows no mesomorphic behavior. Both the spacer length and the nature of terminal groups have profound influence on the phase transition temperatures and thermal stability of the mesophase. The polymers with longer spacers tend to form a more ordered mesophase with a wider temperature range. Among three polymers with the same spacer length, the polymer with a trifluoromethyl terminal end group is inclined to form a more ordered mesophase than the other two polymers. No side chain crystallization occurred for all obtained polymers. © 1994 John Wiley & Sons, Inc.     

Multi‐functional initiator and poly(carboxybetaine methacrylamides) for building biocompatible surfaces using “nitroxide mediated free radical polymerization” strategies

Biomaterials generally suffer from rapid nonspecific protein adsorption, which initiates many deleterious host responses, and complex chemistries that are employed to facilitate cellular interactions. A chemical approach that, based upon current literature, combines a nonfouling architecture with a biomemtic cell‐adhesive end‐group, is presented. Namely, surface‐initiated polymerization of zwitterionic [poly (carboxybetaine methacrylamide)] brushes, with controlled charge densities and phosphonate head groups. Nitroxide mediated free radical polymerization (NMFRP) was employed for various reasons: reduces presence of potentially cytotoxic organometallic catalysts common in atom transfer radical polymerization (ATRP); and it allows a phosphonate end‐group instead of the common brominated end‐group. Thermally oxidized silicon wafers were covalently functionalized with diethyl‐(1‐(N‐(1‐(3‐(trimethoxysilyl)propylcarbamoyl)ethoxy)‐N‐tert‐butylamino)ethyl)phosphonate. NMFRP was used to graft zwitterionic carboxybetaine methacrylamide monomers of varying inter‐charge separation. The resulting thin films were characterized using Attenuated Total Reflectance‐Fourier Transform Infrared (ATR‐FTIR) and X‐ray photoelectron (XPS) spectroscopy, ellipsometry, water contact angle analysis, and thermo gravimetric analysis (TGA). The effect of spacer group on the surface charge density was determined using zeta potential techniques. It is thought that this stratagem will facilitate the ability to tailor systematically both the interior and terminal polymer properties, providing a platform for further understanding how these conditions affect protein adsorption as well as cell‐surface interactions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

SYNTHESIS AND CHARACTERIZATION OF WATER-SOLUBLE BLOCK COPOLYMERS WITH AN END-TAGGED NAPHTHALENE PROBE

Water-soluble A-B block copolymers of 2-perfluoroethyl-2-oxazoline or 2-pentyl-2-oxazoline as hydrophobic monomers and 2-methyl-2-oxazoline as hydrophilic monomer were prepared by means of the living cationic ring-opening polymerization. The polymerization was initiated with N-methyl-2-(1-naphthyl)-2-oxazolinium trifluoromethanesulfonate as fluorescence label followed by sequential addition of the hydrophobic and the hydrophilic monomer. The polymerization was monitored by ¹H NMR spectroscopy and gel permeation chromatography (GPC) measurements. The results revealed that fluorophilic block copolymers can be prepared by this method while lipohilic block copolymers are not accessible by this monomer sequence. Micelle formation of the fluorophilic block copolymers in aqueous solution was studied by means of steady-state fluorescence spectroscopy which confirmed strong intermolecular excimer formation of the terminal bounded naphthalene moiety. In chloroform as a good solvent for both blocks, only monomer fluorescence could be observed.