Theoretical study of correlations between the coordination structures and catalytic activities in polymer-stabilized au nanocluster catalysts

Au nanoclusters (Au NCs) stabilized by poly(N-vinyl-2-pyrrolidone) and poly(allylamine), abbreviated to Au:PVP and Au:PAA, catalyze the aerobic oxidation of p-hydroxybenzyl alcohols, but the catalytic activity of Au:PVP is much higher than that of Au:PAA. To elucidate the correlations between the catalytic activities and coordination structures of the stabilizing polymer, the substrate accessibility on Au NCs was estimated by density functional theory (DFT) and molecular dynamics (MD) calculations. For MD simulations, we applied a systematic method to optimize the temperature parameters in temperature replica exchange molecular dynamics (T-REMD), and the coordination structures were comprehensively classified by multivariate analysis. The results show that the number of open active sites on the Au NCs is a good index for predicting the catalytic activities. © 2018 Wiley Periodicals, Inc.     

Colloidal gold nanoparticles as catalyst for carbon-carbon bond formation: application to aerobic homocoupling of phenylboronic acid in water

Gold nanoparticles (<2 nm) stabilized by poly(N-vinyl-2-pyrrolidone) (Au:PVP NPs) were prepared by reduction of AuCl4- with NaBH4 in the presence of PVP and characterized via an array of methods including optical absorption spectroscopy, transmission electron microscopy, X-ray diffraction, X-ray absorption near-edge structure, extended X-ray absorption fine structure, and X-ray photoelectron spectroscopy. We demonstrate for the first time that the Au:PVP NPs act as catalyst toward homocoupling of phenylboronic acid in water under aerobic conditions. Suppression of biphenyl formation under anaerobic conditions indicates that molecular oxygen dissolved in water is intimately involved in the coupling reactions. A mechanism of the aerobic homocoupling catalyzed by the Au:PVP NPs is proposed on the basis of a crucial role of dissolved oxygen, steric effects on the product yields, and the well-established mechanism for the Pd(II)-based catalysts.     

Microfluidic synthesis and catalytic application of PVP-stabilized, approximately 1 nm gold clusters

Small PVP-stabilized gold clusters were successfully prepared by the homogeneous mixing of continuous flows of aqueous AuCl 4 (-) and BH 4 (-) in a micromixer. Spectroscopic characterization revealed that microfluidic synthesis could yield monodisperse Au:PVP clusters with an average diameter of approximately 1 nm, which is smaller than clusters produced by conventional batch methods. These approximately 1 nm Au:PVP clusters exhibited higher catalytic activity for the aerobic oxidation of p-hydroxybenzyl alcohol than did Au:PVP clusters prepared by batch methods.     

Hierarchical CdSe-gold hybrid nanocrystals: synthesis and optical properties

The synthesis of hybrid nanostructures with controlled size, shape, composition and morphology has attracted increasing attention due to the fundamental and applicable interest. Here, we demonstrate the synthesis and optical properties of hierarchical CdSe-Au hybrid nanostructures with zinc blende (ZB) CdSe nanocrystals (NCs). For 3.5 nm ZB CdSe NCs, one Au cluster was deposited on each CdSe NC. Nevertheless, several Au clusters were selectively deposited on the apexes of 5 nm and 8 nm ZB CdSe NCs, resulting from the different reactivity of crystal facets. Furthermore, hierarchical CdSe-Au nanostructures with complex morphology were organized with the isolated CdSe-Au hybrid NCs by the coalescence of Au domains on the CdSe-Au hybrid NCs. UV-Vis spectra revealed a red tail upon the deposition of Au clusters. The chemical joint of Au on CdSe NCs was further confirmed by fluorescence quenching. The optical limiting performance of CdSe-Au hybrid NCs dispersed in toluene was investigated at 532 nm using a Nd:YAG laser with the pulse width of 8 ns.     

Highly catalytic spherical carbon nanocomposites allowing tunable activity via controllable Au-Pd doping

We report the synthesis of highly catalytic spherical carbon composite particles with Au-Pd bimetallic nanoparticle doping using a microwave-assisted technique that allows control over the location of the nanoparticles (NPs), putting them into stable interior, but still near-surface locations (within a 100 nm thick shell). First, composite particles with Pd NPs inside of nanoporous carbon spheres (CSs) were synthesized. Subsequent immersion of the composite particles in HAuCl(4) solutions containing PVP led to an addition of Au near the Pd. Au-Pd/CS composites with Au:Pd atomic ratios varying from 0.4 to 4.6 were prepared. The growth of Au and its location relative to the carbon's surface and the Pd are discussed. The catalytic activity towards the reduction of 4-nitrophenol is tunable via the Au:Pd atomic ratio. Optimizing the composition increases the activity a hundredfold over that of the corresponding monometallic Pd/CS. The catalytic activity arises from the synergy between different contributing mechanisms, here especially the interaction between the carbon matrix and metals, metal-metal interfaces, and the hydrogen absorption capabilities of Pd.     

Highly selective synthesis of catalytically active monodisperse rhodium nanocubes

Monodisperse sub-10 nm Rh nanocubes were synthesized with high selectivity (>85%) by a seedless polyol method. The {100} faces of the Rh NCs were effectively stabilized by chemically adsorbed Br- ions from trimethyl(tetradecyl)ammonium bromide (TTAB). This simple one-step polyol route can be readily applied to the preparation of Pt and Pd nanocubes. Moreover, the organic molecules of PVP and TTAB that encapsulated the Rh nanocubes did not prevent catalytic activity for pyrrole hydrogenation and CO oxidation.     

Surfactant-free synthesis of palladium nanoclusters for their use in catalytic cross-coupling reactions

Surfactant-free Pd nanoclusters (Pd NCs) (size: 1-1.5 nm) showed high catalytic activity in the Suzuki-Miyaura cross-coupling and Mizoroki-Heck reactions. The Pd NCs had a high turnover number, up to 6.0 × 10(8), which can be recycled at least five times without loss of catalytic activity.     

Photothermal Oxidation of Cinnamyl Alcohol with Hydrogen Peroxide Catalyzed by Gold Nanoparticle/Antimony-Doped Tin Oxide Nanocrystals

Gold nanoparticles with different mean sizes were formed on antimony-doped tin oxide nanocrystals by the temperature-varied deposition-precipitation method (Au/ATO NCs). Au/ATO NCs possess strong absorption in the near-infrared region due to Drude excitation in addition to the localized surface plasmon resonance (LSPR) of AuNPs around 530 nm. Au/ATO NCs show thermally activated catalytic activity for the oxidation of cinnamyl alcohol to cinnamaldehyde by hydrogen peroxide. The catalytic activity increases with a decrease in the mean Au particle size (d_Au) at 5.3 nm≤d_Au≤8.2 nm. Light irradiation (λ_ex >660 nm, ∼0.5 sun) of Au/ATO NCs increases the rate of reaction by more than twice with ∼95 % selectivity. Kinetic analyses indicated that the striking enhancement of the reaction stems from the rise in the temperature near the catalyst surface of ∼30 K due to the photothermal effect of the ATO NCs.     

Effects of Capping Agents on the Oxygen Reduction Reaction Activity and Shape Stability of Pt Nanocubes

We investigated the formation of Pt nanocubes (NCs) and their electrocatalytic oxygen reduction reaction (ORR) properties and structural stability using two different capping agents, namely, polyvinylpyrrolidone (PVP) and oleylamine (OAm). The mono-dispersity of the obtained Pt NCs and their interactions with PVP and OAm were analyzed by transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), Fourier-transformed infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). The TEM data show a high mono-dispersity (82 %) and a large mean particle size (9-10 nm) for the Pt NCs obtained by the oleylamine-assisted method compared to those prepared via the PVP-assisted procedure (68 %, 6–7 nm). FTIR, XPS, and TGA data show that PVP and OAm still remain at the Pt surface, despite washing. Interestingly, the OAm-capped Pt NCs show significantly higher electrochemically active surface area (ECSA) and ORR activity than the PVP-capped ones. An accelerated stress protocol, however, reveals that the OAm-capped NCs possess a poor structural stability during electrochemical cycling. The loss of a defined surface arrangement in the NCs is connected with a transformation into a near-spherical particle shape. In contrast, the PVP-capped NCs mainly retain their particle shape due to their strong capping behavior. In addition, we have developed a degradation model for NCs as a function of electrochemical parameters such as upper potential and cycle number. Altogether, we provide fundamental insights into the electronic interactions between capping agent and Pt NCs and the role of the adsorption strength of the capping agent in improving the electrochemical ORR performance as well as the structural stability of shape-controlled nanoparticles.     

金二元纳米晶超晶格的自组装和结构表征

The assembly of two-component nanocrystals (NCs) such as metals, magnets, and semiconductors into binary nanocrystal superlattices (BNSLs) provides a fabrication route to novel classes of materials. BNSLs with certain structures can exhibit the combined and collective properties of their building blocks and are widespread in the fields of electronics and magnetic devices. As most studies have focused on combined two-component NCs of different sizes for self-assembling BNSLs, there are a few studies on single-component NCs of different sizes for the construction of BNSLs; this is especially true for Au NCs. Noble metallic Au NCs are an excellent candidate material because of their exceptional chemical stability, catalytic activity, process ability, and metallic nature; these characteristics provide them unique size-dependent optical and electronic properties as well as a wide variety of applications in sensing, imaging, electronic devices, medical diagnostics, and cancer therapeutics owing to their strong interactions with external electromagnetic fields. Therefore, it is important to develop a simple and efficient procedure to build BNSLs with different sizes of Au NCs. In our study, we synthesized monodispersed (size distribution < 10%) 6.0, 7.3, and 9.6 nm Au NCs using dodecanethiol-stabilized 3.7 nm Au NCs as seeds through a seed-growth method in oleylamine. The obtained Au NCs exhibited morphology and nanocrystallinity (single-domain and polycrystalline) similar to those of Au seeds. As the size of Au NCs increased from 3.7 to 6.0, 7.3, and 9.6 nm, the surface plasmon resonance peaks narrowed and indicated a red shift. The oleylamine-functionalized 6.0, 7.3, and 9.6 nm Au NCs were mixed with 3.7 nm Au NCs at certain concentration ratios. Au BNSLs with AB₂ (hexagonal AlB₂ structure), AB₁₃ (NaZn₁₃ structure), and AB (cubic NaCl structure) type were obtained through the solvent evaporation method. The (001) plane of the AlB₂-type structure, (001) plane of the NaZn₁₃-type structure, and (100) plane of NaCl-type structure superlattices were observed through transmission electron microscopy (TEM). The effective particle size ratios (γ= D_small/D_large) serve as the critical determining factor in the formation of the BNSLs. The effective particle size of NCs is equal to the sum of the metal core diameter and twice the thicknesses of the surface ligand. In our study, the effective particle size D_small (Au seed) is 5.7 nm; the effective particle sizes D_large (6.0, 7.3, and 9.6 nm Au NCs) are 9.0, 10.3, and 12.6 nm, respectively. The effective particle size ratios γ were therefore calculated to be 0.63, 0.55, and 0.45, respectively. The relevant space filling principle predicted the stability of the AlB₂, NaZn₁₃, and NaCl-type structures in the range of 0.482 < γ < 0.624, 0.54 < γ < 0.625, and γ < 0.458, respectively; the experimental results adequately matched the relevant space filling principle. The investigation of such a single nanocomponent as a building block is noteworthy with regard to the structures and properties of BNSLs as well as the potential development of novel meta-materials.     

Ultrasmall Pd nanoclusters: facile synthesis and versatile catalytic application

A simple and efficient method for the synthesis of ultrasmall Pd nanoclusters(NCs) has been developed. The as-obtained Pd NCs displayed uniform size with an average diameter of 1.8±0.2 nm. The ultrasmall Pd NCs and carbon nanotubes(CNTs)-supported Pd NCs also showed outstanding catalytic activity for nitrobenzene reduction and Suzuki coupling reactions. Notably, the reactions were conducted under mild conditions with high yield and selectivity.     

Encapsulation of ZnS:Mn2+ nanocrystals with diblock copolymers

The encapsulation of the nanocrystalline manganese‐doped zinc sulfide (ZnS:Mn) in poly(styrene‐b‐2vinylpyridine) (PS‐PVP) diblock copolymers is reported. Below the critical micelle concentration in the absence of nanocrystals (NCs), inverse micelles of PS‐PVP were induced by adding ZnS:Mn NCs, the presence of which was confirmed by scanning force microscope and dynamic light scattering. In toluene, a PS‐selective solvent, the less‐soluble PVP blocks preferentially surround the ligand‐coated ZnS:Mn NCs. For PS‐PVP encapsulated ZnS:Mn NCs, the ratio of blue emission to orange emission of ZnS:Mn NCs is dependent on both the concentration of PS‐PVP and the solvent quality. The pyridine of PVP blocks form complexes with the Zn atoms via the nitrogen lone pair and thus the sulfur vacancies are passivated. As a result, the defect‐related blue emission is selectively quenched even when the micelles are not formed. As the concentration of PS‐PVP encapsulating the ZnS:Mn NCs increases, the intensity of blue emission decreases. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3227–3233, 2006     

Cancer Cell Imaging Using in Situ Generated Gold Nanoclusters

In situ generated fluorescent gold nanoclusters (Au‐NCs) are used for bio‐imaging of three human cancer cells, namely, lung (A549), breast (MCF7), and colon (HCT116), by confocal microscopy. The amount of Au‐NCs in non‐cancer cells (WI38 and MCF10A) is 20–40 times less than those in the corresponding cancer cells. The presence of a larger amount of glutathione (GSH) capped Au‐NCs in the cancer cell is ascribed to a higher glutathione level in cancer cells. The Au‐NCs exhibit fluorescence maxima at 490–530 nm inside the cancer cells. The fluorescence maxima and matrix‐assisted laser desorption ionization (MALDI) mass spectrometry suggest that the fluorescent Au‐NCs consist of GSH capped clusters with a core structure (Au_8‐13). Time‐resolved confocal microscopy indicates a nanosecond (1–3 ns) lifetime of the Au‐NCs inside the cells. This rules out the formation of aggregated Au–thiolate complexes, which typically exhibit microsecond (≈1000 ns) lifetimes. Fluorescence correlation spectroscopy (FCS) in live cells indicates that the size of the Au‐NCs is ≈1–2 nm. For in situ generation, we used a conjugate consisting of a room‐temperature ionic liquid (RTIL, [pmim][Br]) and HAuCl₄. Cytotoxicity studies indicate that the conjugate, [pmim][AuCl₄], is non‐toxic for both cancer and non‐cancer cells.     

Theranostic gold cluster nanoassembly for simultaneous enhanced cancer imaging and photodynamic therapy

As one of near-infrared (NIR) fluorescent (FL) nanoprobes, gold nanoclusters (Au NCs) are delicated to passive-targeting tumors for NIR FL imaging, but which easily cleared by the kidneys for the small size (<1.5 nm). Herein, the well-defined gold clusters nanoassembly (Au CNA) was synthesized by the selfassembly of Au NCs based on protein cross-linking approach. The as-prepared Au CNA demonstrated highly effective cellular uptake and precise tumor targeting compared to that of Au NCs. Moreover, with the irradiation of 660 nm laser, Au CNA generated largely reactive oxygen species (ROS) for photodynamic therapy (PDT). In vitro and in vivo PDT revealed that Au CNA exhibited largely cell death and significantly tumor removal at a low power density of 0.2 W/cm². It could be speculated that the laser-excited Au CNA produced photon energy, which further obtained electron from oxygen to generate radical species. Therefore, Au CNA as a photosensitizer could realize NIR FL imaging and NIR laser induced PDT.     

Gold nanocluster-based fluorescent probes for near-infrared and turn-on sensing of glutathione in living cells

In this study, a novel Au nanocluster (NC)-based fluorescent sensor has been designed for near-infrared (NIR) and turn-on sensing of glutathione (GSH) in both living cells and human blood samples. The large Stokes-shifted (140 nm) fluorescent Au NCs with NIR emission and long-wavelength excitation have been rapidly synthesized for 2 h by means of a microwave-assisted method in aqueous solution. The addition of Hg(II) leads to an almost complete emission quenching (98%) of Au NCs because of the interaction of Hg(II) and Au(I) on the surface of Au NCs. After introducing GSH to the Au NC-Hg(II) system, a more than 20 times fluorescent enhancement is obtained because of the preferable affinity of GSH with Hg(II). Under optimum conditions, the fluorescence recovery is linearly proportional to the concentration of GSH between 0.04 and 16.0 μM and the detection limit is as low as 7.0 nM. This Au NC-based sensor with high sensitivity and low spectral interference has been proven to facilitate biosensing applications.     

聚合物稳定的金纳米簇催化：理论计算与实验的相互影响

平均粒径为2–10 nm的聚合物稳定的Au纳米簇(NCs)表现出独特的催化性能。多个研究表明，影响聚合物稳定的Au NCs催化活性的主要因素为： Au NC尺寸的控制、聚合物的选择以及反应条件的优化。这是由于聚合物稳定的Au NCs在多个催化反应中表现出明显的尺寸效应，其催化活性也因所采用的聚合物和反应条件的不同而不同。为了阐明影响聚合物稳定的Au NCs催化活性的内在原因，众多研究者关注于聚合物稳定的Au NCs催化中的理论计算与实验的相互影响。本文主要总结了聚合物稳定的Au NCs中这种相互影响的研究进展。     

Synthesis of Au, Au/Ag, Au/Pt and Au/Pd nanoparticles using the microwave-polyol method

Gold, Au/Ag, Au/Pt and Au/Pd bimetallic nanoparticles with varying mol fractions were synthesized in ethylene glycol and glycerol, using the microwave technique in the presence of a stabilizer poly(N-vinylpyrrolidone) (PVP). It was found that bimetallic colloids of Au/Ag, Au/Pd and Au/Pt form an alloy either on co-reduction of respective metal ions or on mixing individual sols.     

A facile solution-phase synthesis of high quality water-soluble anatase TiO2 nanocrystals

Water-soluble anatase TiO(2) nanocrystals (NCs) were synthesized by a simple sol-gel method. The reaction time is greatly reduced even under mild conditions. High-resolution transition electron microscopy (HRTEM), X-ray diffraction (XRD) and UV-vis were used to characterize the synthesized NCs and proved that the NCs are anatase phase and about 2 nm with near spherical shape. Surface photovoltage spectroscopy (SPS) experiments show that the synthesized anatase NCs have good photovoltaic properties compared with that of poly(vinyl pyrrolidone) (PVP) coated NCs synthesized by the similar method.     

Redox reaction induced Ostwald ripening for size- and shape-focusing of palladium nanocrystals

We report here that size- and shape-focusing can be achieved through the well-known Ostwald ripening process to produce high-quality metal nanocrystals (NCs). Using Pd as an example, we show that the addition of small NCs of appropriate sizes could help in modulating the growth of larger NCs and enable excellent control over both the size and shape uniformity of the products. A detailed mechanistic study showed that the self-focusing of Pd NCs relied on a dissolution and regrowth process induced by redox reaction of HCHO. With the assistance of HCHO, injection of small sacrificial nanocrystals (SNCs), with sizes below a critical value, into larger seeds results in the dissolution of the SNCs and subsequent deposition onto the larger ones, thus allowing the formation of monodisperse Pd NCs. We have identified the critical radius of the SNCs to be ∼5.7 nm for Pd, and verified that SNCs with sizes larger than that could not effectively support the growth of larger seeds. More interestingly, since Ostwald ripening involves matter relocation, this synthetic approach could even break the self-termination growth habits of metal NCs and produce nanocrystals with sizes that are not conveniently accessible by direct growth.     

Wavelength Dependence of the Fluorescence Quenching Efficiency of Nearby Dyes by Gold Nanoclusters and Nanoparticles: The Roles of Spectral Overlap and Particle Size

The efficiency of the glutathione monolayer-protected gold nanocluster (NC) Au(25) (1.2 nm metal core diameter (d)) in quenching the emission of dyes intercalated into DNA is compared to that of 2 and 4 nm gold nanoparticles (NPs). In all cases, the DNA/dye moieties and the gold particles are not covalently attached but rather form non-covalent ground state complexes. Under these conditions, steady-state measurements reveal that the quenching efficiency of Au(25) is a factor of 10 lower than that of plasmonic 4 nm gold NPs but comparable to that of 2 nm particles which do not show a distinct plasmon band. Nonetheless, significant emission quenching is observed even at very low (nM) concentrations of Au(25). The quenching efficiency of the 4 nm NPs is significantly higher for dyes emitting near the wavelength of the plasmon peak whereas that of the 2 nm gold NPs is well described by the nano-surface energy transfer (NSET) model proposed by the Strouse group (J. Am. Chem. Soc. 127, 3115 2005). Interestingly, for Au(25) the maximum quenching efficiency occurs for dyes emitting in the same wavelength range as that of the 2 and 4 nm NPs (490-560 nm), where it shows no discrete absorption features, rather than for wavelengths coincident with its HOMO-LUMO, intra-band or inter-band transitions. The fluorescence quenching properties of Au(25) NCs are therefore found to be distinct from those of larger NCs and NPs but do not appear to conform to theoretical predictions advanced thus far.