基于辅助电介质层的棱镜表面等离子体共振效应研究

研究了一种基于棱镜基底-辅助电介质层-金膜-待测介质四层结构的表面等离子体共振(surface plasmon resonance,SPR)效应激励模型.采用薄膜光学与波导理论,探索了由辅助电介质层与金膜复合而成共振薄膜对SPR效应的激励机理与调制特性.借助时域有限差分方法,数值模拟得到辅助电介质层属性与共振能量传输特性关系.在此基础上,构建了波长调制型棱镜辅助电介质层结构SPR激励系统.研究结果表明,当待测介质折射率相同时,相较基于棱镜基底-金膜-待测介质三层结构的Kretschmann激励模型,辅助电介质层激励模型共振光谱整体向长波方向偏移且半波宽度出现显著展宽效应.而当待测介质折射率增大时,辅助电介质层型激励模型的共振光谱不仅会向长波方向偏移,而且折射率响应灵敏度比棱镜Kretschmann三层激励模型高出75%.因此该模型能够为诸如高灵敏度检测、新型光学滤波与调制器件设计等领域的研究应用提供理论与实践储备.     

Design of a highly sensitive surface plasmon resonance sensor using aluminum-based diffraction grating

A highly-sensitive grating-based surface plasmon resonance (SPR) sensor is proposed. The angular interrogation method has been used to study the performance of the sensor, and high sensitivity is obtained if the ?1st diffraction order is used to excite surface plasmon (SP). The sensitivity as well as the width of the SPR curves and reflective amplitude is considered for designing the sensor. Compared with the conventional gold (Au)-based or silver (Ag)-based SPR sensor, it is found that the aluminum (Al)-based sensor has the best performance. The oxidation problem of an Al-based SPR sensor has been addressed by coating it with an ultrathin gold film on the surface. Numerical simulations based on rigorous coupled wave analysis (RCWA) show that the sensitivity of the optimized sensor is 245°/RIU (degree per refractive index unit).     

Design of Highly Sensitive Surface Plasmon Resonance Sensors Using Planar Metallic Films Closely Coupled to Nanogratings

We investigate the sensitivity enhancement of surface plasmon resonance （SPR） sensors using planar metallic films closely coupled to nanogratings. The strong coupling between localized surface plasmon resonances （LSPRs） presenting in metallic nanostructures and surface plasmon polaritons （SPPs） propagating at the metallic film surface leads to changes of resonance reflection properties, resulting in enhanced sensitivity of SPR sensors. The effects of thickness of the metallic films, grating period and metal materials on the refractive index sensitivity of the device are investigated. The refractive index sensitivity of nanograting-based SPR sensors is predicted to be about 543 nm/RIU （refractive index unit） using optimized structure parameters. Our study on SPR sensors using planar metallic films closely coupled to nanogratings demonstrates the potential for significant improvement in refractive index sensitivity.     

Surface plasmon optical sensor with enhanced sensitivity using top ZnO thin film

Surface plasmon resonance (SPR) is one of the most sensitive label-free detection methods and has been used in a wide range of chemical and biochemical sensing. Upon using a 200 nm top layer of dielectric film with a high value of the real part ε′ of the dielectric function, on top of an SPR sensor in the Kretschmann configuration, the sensitivity is improved. The refractive index effect of dielectric film on sensitivity is usually ignored. Dielectric films with different refractive indices were prepared by radio frequency magnetron (RF) sputtering and measured with spectroscopic ellipsometry (SE). The imaginary part ε′′ of the top nanolayer permittivity needs to be small enough in order to reduce the losses and get sharper dips. The stability of the sensor is also improved because the nanolayer is protecting the Ag film from interacting with the environment. The response curves of the Ag/ZnO chips were obtained by using SPR sensor. Theoretical analysis of the sensitivity of the SPR sensors with different ZnO film refractive indices is presented and studied. Both experimental and simulation results show that the Ag/ZnO films exhibit an enhanced SPR over the pure Ag film with a narrower full width at half maximum (FWHM). It shows that the top ZnO layer is effective in enhancing the surface plasmon resonance and thus its sensitivity.     

基于表面等离子体共振的新型超宽带微结构光纤传感器研究

基于表面等离子体共振的微结构光纤传感器具有高灵敏、免标记和实时监控等优点.如今,由于此类传感器广泛应用于食品安全控制、环境检测、生物分子分析物检测等诸多领域而受到大量研究.然而,目前所报道的绝大多数此类传感器只能应用于可见光或近中红外传感.因此,对可应用于中红外传感的表面等离子体共振微结构光纤传感器的研究是一项极具挑战性的工作.基于此,本文设计了一种可以工作在近红外和中红外区域的新型高灵敏表面等离子体共振微结构光纤传感器.传感器采用双芯单样品通道结构,该结构不仅可以消除相邻样品通道间的相互干扰和提高传感器的信噪比,还可以在超宽带波长范围内实现高灵敏检测.采用全矢量有限元法对其传感特性进行了系统的研究,研究结果表明:当待测样品折射率分布在1.423—1.513范围内时,传感器不仅可以在1.548—2.796μm的超宽带波长范围内进行工作,而且其平均灵敏度高达13964 nm/RIU.此外,传感器的最高波长灵敏度和折射率分辨率分别为17900 nm/RIU,5.59×10^–7 RIU.     

基于金银合金薄膜的近红外表面等离子体共振传感器研究

利用淀积在玻璃衬底上的金银合金薄膜作为表面等离子体共振(SPR)芯片, 构建了Kretschmann结构的近红外波长检测型SPR传感器. 采用不同浓度的葡萄糖水溶液测试了金银合金薄膜SPR传感器的折射率灵敏度. 实验结果表明随着入射角从7.5°增大到 9.5°, SPR吸收峰的半高峰宽从292.8 nm 减小到 131.4 nm, 共振波长从 1215 nm蓝移到 767.7 nm, 折射率灵敏度从35648.3 nm/RIU 减小到 9363.6 nm/RIU.在相同的初始共振波长(λ_R)下获得的金银合金薄膜SPR折射率灵敏度高于纯金膜(纯金膜在λ_R=1215 nm下的折射率灵敏度为29793.9 nm/RIU). 利用1 μmol/L的牛血清蛋白(BSA)水溶液测试了传感器对蛋白质吸附的响应.结果表明, BSA分子吸附使得金银合金薄膜SPR吸收峰红移了12.1 nm而纯金膜SPR吸收峰仅红移了9.5 nm. 实验结果还表明, 在相同λ_R下, 金银合金薄膜SPR吸收峰的半高峰宽大于纯金膜的半高峰宽, 因此其光谱分辨率比纯金膜SPR传感器低. 关键词： 金银合金薄膜 表面等离子体共振 波长检测型 高灵敏度     

基于p偏振光双面反射的薄膜传感器光学参数的优化

ｐ偏振光在镀膜平板玻璃上、下表面反射光强比γ的角度调制曲线的性状与膜层光学参数密切相关。分析了γ与膜层折射率、消光系数及膜厚的相对梯度随光参数变化的着急为基于ｐ偏振光双面反射的薄膜传感器选择最佳参数提供了理论依据,计算表明该类型传感器对膜层折射率的测量分辨率高达１０＾－７。对不同工艺条件下得到的溶胶－凝胶ＳｎＯ２膜进行光学参数测定及初步气敏实验,结果表明ｐ偏振光双面反射可作为高灵敏度光化学传感器的     

激励表面等离子共振的金属薄膜最佳厚度分析

根据电磁场在金属薄膜中的能量分布规律和金属薄膜具有复介电常数的特点,对激励表面等离子共振的金属薄膜的最佳厚度进行了探讨. 指出金属薄膜的最佳厚度与激励光波长和金属薄膜的折射率有关,建立了描述它们之间关系的数学表达式,并用实验方法进行验证. 将理论结果与他人的测量结果进行对比后发现,两者符合较好. 研究结果表明：在角度调制下的表面等离子共振传感器,为了获得更高的灵敏度,可根据激励光波长和金属薄膜折射率的虚部确定所要制备金属薄膜的最佳厚度;在波长调制下,则由中心波长和折射率的虚部确定金属薄膜的最适宜使用厚度. 关键词： 折射率 金属薄膜 全内反射 表面等离子共振     

纳米金表面修饰与表面等离子体共振传感器的相互作用研究

为了分析纳米金表面修饰对表面等离子体共振(SPR)的放大作用,以及其对传感器本身的影响,首先,基于色散介质的吸收理论,通过建立波长型SPR生物传感器四层膜结构的数学模型,理论分析了传感器表面所吸附纳米金对传感器的影响:纳米金的表面修饰,改变了表面等离子体传感器中棱镜表面各介质层内电磁场的能量分布,削弱了金属膜在共振吸收中的作用,从而使SPR曲线的半波宽度增加,最小反射系数增大,金膜的最优膜厚度也随之改变.其次,通过不同厚度的金膜外吸附纳米金的对比试验,验证了此理论.金膜厚45nm、表面修饰10nm纳米金颗 关键词： 表面等离子体共振 生物传感器 纳米金 金属膜     

基于表面等离子体共振传感器的金胶体表征

设计了表面等离子体共振(SPR)传感器实验装置,制备了金膜和金纳米胶体溶液,测量了不同厚度金膜和不同浓度金胶体溶液的SPR角谱,得到了不同浓度金胶体溶液的折射率.     

表面等离子共振金/钯复合膜氢敏传感器

提出了一种新颖的钯(Pd)/金(Au)复合膜表面等离子共振氢敏结构,与单一Pd膜氢敏传感器相比,具有可靠性好、灵敏度高和响应度大等特点。利用表面等离子共振理论建立了Au/Pd复合膜氢敏传感器的数学模型,并对Au/Pd复合膜氢敏传感器的灵敏度进行了数值模拟。数值模拟结果表明:基于Au(2nm)/Pd(20nm)复合膜氢敏传感器所获得的最佳灵敏度比单一Pd(20nm)膜氢敏传感器提高了49 4%。     

基于表面等离子体共振和定向耦合的D形光子晶体光纤折射率和温度传感器

利用光子晶体光纤结构的灵活性和性能的优越性, 设计了一种基于D形光子晶体光纤的折射率和温度传感器. 在D形光子晶体光纤表面抛磨并镀上金纳米薄膜, 作为表面等离子体共振传感通道用来测量液体折射率; 在包层的一个空气孔中填充温敏液体甲苯, 作为定向耦合通道实现对温度的测量. 进一步的数值计算发现, 基于定向耦合效应的温度传感和基于表面等离子体共振的折射率传感相互独立, D形光子晶体光纤同时进行折射率和温度传感检测. 在各向异性的完美匹配层边界条件下利用全矢量有限元法对该传感器特性进行了数值研究, 发现D形光子晶体光纤的空气孔直径决定了定向耦合吸收峰的中心波长和温度传感的灵敏度, 金薄膜的厚度和D形结构的抛磨深度仅影响表面等离子体共振峰的相对强度. 结果表明: 该传感器在-10–80 ℃的温度范围内具有11.6 nm/℃的温度灵敏度, 在1.34–1.44折射率范围内折射率灵敏度最高可达26000 nm/RIU.     

内置调制层型光纤表面等离子体波共振传感器研究

研究了一种基于内置调制层结构的光纤表面等离子体波共振(SPR)传感器。通过在金膜与纤芯的内侧增覆具有不同厚度和属性的光学透明薄膜作为内调制层,构成了性能独特的光电复合薄膜,起到调节倏逝波矢量和金膜表面等离子体振荡波矢量的双重作用,进而控制共振效应,为调节灵敏度提供依据。采用时域有限差分方法对内置调制层结构光纤SPR共振激励模型属性进行数值仿真。在此基础上,研制了用于液体折射率测量的内置调制层型光纤SPR传感探针。实验结果表明,该传感器在1.335～1.392折射率范围内,随着待测液体折射率的增大,SPR共振光谱向长波方向偏移,且灵敏度达到2263.1nm/RIU,与基于纤芯-金膜-环境介质三层结构的常规光纤SPR传感器相比提高一倍,能够更好地满足环境折射率检测的需求。     

螺旋形塑料光纤表面等离子体共振折射率传感器

研究了基于波长调制的螺旋形塑料光纤(plastic optical fiber, POF)表面等离子体共振(surface plasmon resonance, SPR)折射率传感器。采用机械热压和扭曲法将塑料光纤制备成螺旋形,在螺旋形POF上通过磁控溅射蒸镀一定厚度(约50 nm)的金属薄膜来激励SPR效应,从而形成螺旋形POF-SPR传感器。通过对螺旋形POF-SPR传感器的结构进行修饰,研究不同结构参数对折射率传感特性的影响。实验结果表明:由厚度为500μm扁平形POF扭制、螺纹数为4的螺旋形POF-SPR传感器具有较好的线性度和折射率传感特性,在折射率为1.335～1.400范围内测得的灵敏度为1 262 nm/RIU。该传感器具有成本较低、制备简单、结构稳定等优点。     

Full-field and real-time surface plasmon resonance imaging thermometry

The feasibility of surface plasmon resonance (SPR) imaging thermometry is tested as a potential tool for full-field and real-time temperature field mapping for thermally transient liquid mediums. Using the well-known Kretschmann's analysis [Physik 241, 313 (1971)]. parametric examinations are performed to delineate the effects of important optical properties, including seven different prism materials with different refractive index values and seven different measured dielectric constants for thin gold (Au) films (approximately 47.5 nm in thickness), on the temperature dependence of SPR reflectance intensity variations. Furthermore, a laboratory-implemented real-time SPR thermometry system demonstrates the full-field mapping capabilities for transient temperature field developments in the near-wall region when a hot water droplet (80 degrees C) contacts the Au metal surface (20 degrees C) and spreads either in an air- or in a water-surrounded environment.     

Performances of different metals in optical fibre-based surface plasmon resonance sensor

The capability of various metals used in optical fibre-based surface plasmon resonance (SPR) sensing is studied theoretically. Four metals, gold (Au), silver (Ag), copper (Cu) and aluminium (Al) are considered for the present study. The performance of the optical fibre-based SPR sensor with four different metals is obtained numerically and compared in detail. The performance of optical fibre-based SPR sensor has been analysed in terms of sensitivity, signal-to-noise (SNR) ratio and quality parameter. It is found that the performance of optical fibre-based SPR sensor with Au metal is better than that of the other three metals. The sensitivity of the optical fibre-based SPR sensor with 50 nm thick and 10 mm long Au metal film of exposed sensing region is 2.373 μm/RIU with good linearity, SNR is 0.724 and quality parameter is 48.281 RIU^− 1. The thickness of the metal film and the length of the exposed sensing region of the optical fibre-based SPR sensor for each metal are also optimized.     

Sensitivity enhancement of graphene coated surface plasmon resonance biosensor

In this paper, a highly sensitive surface plasmon resonance biosensor is presented using angular interrogation. Due to low sensitivity of conventional biosensor, graphene/two-dimensional transition metal are used in surface plasmon resonance biosensor to improve the sensitivity. Here, we propose a seven layer model of biosensor which shows by incorporating silicon layer in addition of transition metal dichalcogenides MoS₂ and graphene, the sensitivity of the proposed SPR biosensor can be greatly enhanced than the conventional gold film SPR sensors. It is observed that the highest sensitivity can be obtained by optimizing the structure with 8 nm thickness of silicon layer, one layer of MoS₂ and one layer of graphene. The highest sensitivity of our proposed sensor is 210°/RIU.     

Fiber-optic surface plasmon resonant sensor with low-index anti-oxidation coating

A multimode fiber-optic surface plasmon resonance(SPR) sensor with a MgF2 film as a modulated layer is studied.The fiber-optic SPR sensor is investigated theoretically,specifically the influence of the dielectric protecting layer,using a four-layer model.The sensor is then fabricated with the optimal parameters suggested by the theoretical simulation.The sensor has a high sensitivity in the analyte refractive index(RI) range of 1.33-1.40.The best sensitivity of 4 464 nm/RIU is achieved in the experiment.The use of dielectric film(MgF2) can not only modulate the resonance wavelength of the sensor,but also protect the silver film from oxidation.     

Performance analysis of surface plasmon resonance sensor with high-order absentee layer

A surface plasmon resonance(SPR) sensor with a high-order absentee layer on the top of metallic film is proposed.The performance of the SPR sensor with NaCl, MgO, TiO_2 or AlAs high-order absentee layer is analyzed theoretically. The results indicate that the sensitivity and the full width at half maximum of those SPR sensors decrease with the increasing of the order of absentee layer, but the variation of the figure of merit(FOM) depends on the refractive index of absentee layer.By improving the order of absentee layer with high-refractive-index, the FOM of the SPR sensor can be enhanced. The maximum value of FOM for the SPR sensor with high-order TiO_2(or AlAs) absentee layer is 1.059%(or 2.587%) higher than the one with one-order absentee layer. It is believed the proposed SPR sensor with high-order absentee layer will be helpful for developing the high-performance SPR sensors.     

Surface plasmon sensor with gold film deposited on a two-dimensional colloidal crystal

A sensor based on surface plasmon resonance (SPR) of plasmonic crystals fabricated via a colloidal-crystal-assisted templating method is studied. Plasmonic crystals are prepared by depositing a thin gold (Au) layer onto a two-dimensional array of polystyrene spheres self-assembled on a quartz substrate. The enhanced transmission as a result of the SPR of Au plasmonic crystals, which are immersed in different ambient liquids, are measured and compared with that of polystyrene (PS) microsphere templates of different sizes, both before and after removal of Au nanoprisms formed on the quartz substrate through pores among the spheres. It is found that the measured sensitivities exhibit a linear dependence on the refractive index of the surrounding medium and are linked to coupling effects between SPRs on the corrugated Au film and nanoislands. The feasibility of the SPR system in molecular monolayer detection is further demonstrated through a formation of alkanethiolate self-assembled monolayers on the Au film surface, which causes a 4 nm red-shift of the main SPR. PACS  07.07.Df; 73.20.Mf; 78.66.-w; 81.16.Dn